Database Users

GPRS connecting once, then needs reset

Hi,
I've got an Orange M500, upgraded with the Imate ROM 1.12.00WWE - ever since I upgraded the ROM, I can connect to my Orange GPRS service fine, however, if I disconnect then try to reconnect again, the connection fails. I have to turn on flight mode, then turn on the radio again in order to get GPRS access.
I've tried upgrading to Radio 1.13.00, but still no joy.
Any ideas?

Mine does that and I have the original ROM. A bit of a pain isn't it.

Here's the fix
This was originally posted by Peter for the imate JAM.
I just installed it and it's working like a charm.
1. Download the older version of caller-id from:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
and transfer it over to your device. Any directory is Ok. I used ActiveSync to put it into the My Documents folder.
2. Remove the file IA_CD-Startup.exe from \Windows\Startup on your device.
3. Rename iacontacts.dll to something else (e.g. old-iacontacts.dll). This file is in the \Windows directory of your device but is hidden. However you can rename it using your PC. Open Windows explorer, and navigate to Mobile Device>My PocketPC>Windows.
4. Rename displayCID.dll to something else (e.g. old-displayCID.dll). Access it via your PC the same as for the previous step.
5. Soft reset
6. Run the CAB file on the device - just tap on it.
7. Soft reset.
That should do it.

I have the same GPRS problem too. However, the link you provided just asked for the password to access that ftp. Hey, acs540, do you know the password or do you have that CAB file? Thanks in advance.

usernameassword is xda:xda
The fix in this post seems to refer to caller id!?! I too get the gprs connection problem and have made it better with different roms but not found a sure-fire fix.
If anyone has a patch that fixes this, please post it!

GPRS now working
Hi,
Finally I tried, or at least halfway, After I removed the CallerID everyone is talking about my Qtek9090 now works flawless regarding GPRS.
This is very interesting that Caller ID software makes GPRS not working
Anyway, now I can start and stop GPRS several times, I have now toggled it 10 times without any problem.
Before I had to reset/toggle radio to make it reconnect after a disconnect.
Thank you all that has investigated this problem!
One last thing, Do you really need CallerID? :roll:
Br
Lars

I don't use Caller_ID, but Photo Contacts Pro.
Did you also try to change GPRS slot (Class 8 or Class 10) in GPRS settings?

XShell said:
I don't use Caller_ID, but Photo Contacts Pro.
Did you also try to change GPRS slot (Class 8 or Class 10) in GPRS settings?
Click to expand...
Click to collapse
Well, yes, I have changed to Class8 (4R1T), default was (I belive) Class10
Br
Lars

Problem with Wireles LAN card

I'm got yesterday Wireles LAN Card SDIO 802.11b.Problem is that i can't connect my Qtek 2020 with this card.Can somebody help me about this problem?Thanx

Have you installed the drivers on your device? The card should have come with a CD, if not go to the manufacturers site.
Can you detect any networks?
Please describe the problem more precisely, and maybe someone can guide you better then this.

I'm totaly new in this.I tryed to folow instructions in manua.I instailed all drivers that i have recived,but still i can not find network and i have one wireless in my house.My main problem is that i don't know how i can make set up in my Qtek 2020.Thankx for any sugestion

Ok, I never actually used a separate SD card, but I just finished setting up my home network last week so I'll try to give you some pointers until someone more knowledgeable comes along.
1) If everything was installed correctly, you should get a new icon, in settings or programs (depends on the card I think) for the Wireless utility.
There should be an option to turn it on and off, so make sure its on.
2) If you are not sure how your network is configured, or just don't want the hassle of manually setting up the device, download Hitchhiker.
http://www.kasuei.com/hitchhiker/ its a free app that will automatically configure WiFi and connect you to the network. You will need .NET CF2 installed for it to work.
Also you can see any networks that were detected in Start->Settings->Connections->Network cards. You can choose there which one to connect to or manually configure the settings.

Thank you mr.Levenum!!!!
I will download tomorow this progam and i will try to connect SD card with Qtek again.I hope that will working well.Thank you too much for your help. Best regards

Hi!
I followed all instructions,and i instaled drivers and utiluty from instal cd.Problem is that my Qtek can't find any avalible wireles network and i have one in at home.I put all correct parameters for this network,but still nothing.I also tryed with program"Hitchhicker",but problem is the same,hi can't find any network.Have you any sugestion what more i can try.Thank you

Try checking the settings on you router.
Is it set to broadcast SSID?
What standard is the WLAN card B / G ? And what standards does the router support?
Also it is possible that your router is set to a channel the WLAN card does not support (my router supports up to channel 14, but my Jamin only up to 11)
Try using a different channel.

Please Help...wifi Problem

I install in htc touch the followings programms
Skype
ewallet
Pocket CM Keybord
sdkCerts + Windows Live 10.6.0034.0800 fixed
Now i go to Comm manager and i press the button for WLAN. The WLAN is dead. When I go to the Setting --> Connections the icon WiFi is disapear.
Please help me....i have bought the mobile 3 days ago with sim unlock,
Please help me

Uninstall everything you can, if it doesn't help, do a hard reset. After installing each CAB, try to use WiFi.

Hi i have the same Problem.
I instlled diverent Rom. Always the same. I cannot activate the Wifi.
What else can i do? Would another Radio Rom help?

I have done many times hard reset but nothing.
archonw? You have install different ROM and still cannot activate WiFi? Have yοu try original ROM?

I THINK I FOUND THE SOLUTION. In folder My Device -->Windows there are some files
There is a file Wrlsmgr. When i open this file then i see something like the Comm Manager. In this programm there is bluetooth and phone button. When i press the button i can activate or deactivate the phone or the bluetooth. I see then that there is no button for WLAN. I go to the files about bluetooth and phone and i see the followings files.
BluethSetting.htm
Bluetooth Explorer
BluetoothSetting.dll
phone.dll
phone.dot
phone.pwi
PhoneSetting.dll
Then I go to the files about wireless and i see the following files.
Wireless LAN
wireless.bmp
WirelessLAN.htm
WirelessService.dll
WLANSettings.exe
WLANSettings.exe.0409.mui
Do you see something strange? I see 2 thing. There is no a file WLANSettings.dll like bluetooth and phone and what is this WLANSettings.exe.0409.mui strange file?
If some want help me please i would like to see if my files is the same as the files in his phone.
Thank you very much

How to "attach" USB Tool and activate "Internet Sharing" automatically at startup ?

How to "attach" USB Tool and activate "Internet Sharing" automatically at startup ?
I "liberated" my XP downgraded HTC Shift and succesfully tested 3G connectivity.
The problem is that every time I restart the device, I have to:
1) enter WM
2) Attach device via USB Tool
3) Enable Internet sharing
As WM is an operating system, I guess how to do this automatically. Can I write a "bat" file to do these steps or do you have any advice to achieve this ?
Any help MUCh appreciated.
Regards.

joker197cinque said:
I "liberated" my XP downgraded HTC Shift and succesfully tested 3G connectivity.
The problem is that every time I restart the device, I have to:
1) enter WM
2) Attach device via USB Tool
3) Enable Internet sharing
As WM is an operating system, I guess how to do this automatically. Can I write a "bat" file to do these steps or do you have any advice to achieve this ?
Any help MUCh appreciated.
Regards.
Click to expand...
Click to collapse
go to wm -win start menu --settings--connection--ub to pc--enable advance network connectivity.
this should fix the problem, cheers

Unfortunately, it does not solve the problem.
I noticed that the only thing I have to do is to activate Internet Sharing.
How to do this at startup, automatically ? Has WinMo some autoexec file or startup folder ?
Thanks.

Up, please. I'm so near to surf only starting up my shift

Up. Up. Up. Up.

Yes I'm sure you can do all of that with Mort Script,
Good luck!
And don't forget to post your final results so other users would enjoy of that!

unapproachable2kx,
can you support me ?

Maybe you can just drop the shortcut for the application on the startup folder or maybe DotFred's TaskManager can help(http://www.dotfred.net/TaskMgr.htm).

wovens said:
Maybe you can just drop the shortcut for the application on the startup folder or maybe DotFred's TaskManager can help(http://www.dotfred.net/TaskMgr.htm).
Click to expand...
Click to collapse
WinMo has a startup folder (\windows\startup\) that you can create a shortcut for "Internet Sharing" inside, the problem is that you need a parameter with the shortcut to run the "Activate" conmmand in "Internet Sharing"; 'cause a normal shortcut will just run the app, then you'll have to press Activate manually (we want to automate that too); same thing for "USBTool". Unfortunaltely, I don't know the set of parameters for the shortcuts.
Or try looking for some advanced shortcut creation tools for WinMo, like in this list
http://en.handybyte.com/search/shortcut-mode/

htc usb to pc popup

the 3 options for usb to pc pops up when hd is connected to PC.
But if I want to reconnect to mode e.g: disk driver mode, how could I achieve
this without plugout&plugin the usb cable? Thank you.

you can softreset your phone after changing mode
otherwise you can't as far as I know

Yes you can!
Start -> Settings -> Connections tab -> USB to PC
Select what you need and the device will switch to that mode without any resets or replugging of the cable.

usb2pc doesn't include the internet shareing as usb2pcpopup.

There should be InternetSharing program in your start menu (I have Dutty's 3.3 ROM, I don't remember whether this program is stock or not, but I think it is). If you're connected to pc as activesync / usb drive just launch InternetSharing and the phone will switch to modem automatically. Once you disconnect IS the phone will go back to the activesync / usb drive mode.
Don't be afraid to explore your device (and the manual ) - it looks like you don't know about a lot of its features.

I have just flashed back to the official ROM.
The usb2pc do have 3 options. But the cooked rom like Dutty's 3.3 ROM
have only 2 options without internet sharing.
I am aware that I could run share internect, but it is much better if things
can be controlled in under one control page.

Ok, I'm having a problem with this feature... The USB to PC popup is stuck on internet sharing and it won't let me activesync and it's just really starting to make me angry... argh... I've tried going into the registry to change it but I don't know which value to change. I would love to disable the usb to pc altogether except activesync functions. Could anyone help me? I'm using 6.5 v23017.

Nevermind...lol I fixed it. I manually put it in bootloader mode, and flashed athiene os v23409.

yeah and i dont think that the ics option will appear unless ur phone has been given it sim info

XGX5309 said:
Ok, I'm having a problem with this feature... The USB to PC popup is stuck on internet sharing and it won't let me activesync and it's just really starting to make me angry... argh... I've tried going into the registry to change it but I don't know which value to change. I would love to disable the usb to pc altogether except activesync functions. Could anyone help me? I'm using 6.5 v23017.
Click to expand...
Click to collapse
Is there a solution to set it back to Active Sync without Internet Sharing other than flashing a new ROM?
I do not get the USB2PC-Popup anymore and my USB2PC dialog (Settings->Connection->USB2PC) is somehow incomplete (Can't see the "Ask me first .."-Dialog).
Is there a registry hack or something? I'v been googling for hours and I'm pretty sick of it right now.
Appreciate any help, thank you guys.
// edit says:
Found a registry entry:
HKLM\Software\OEM\USBtoPC
my Values are:
AskConnect: 1
Device_Type: 2
DisablePopUpUI: 0
EnableAdvanceChecked: 0
SyncMode: 1
Still nothing ...
//:edit 2
Yeah, well ... I flashed it.