Hey, sup?
The flash in my HD2 camera doesn't work! nothing I did, turn it to Auto, or always, or never, and then Auto again, nothing worked.
Any ideas?
tnx,
Elioravr.
is battery level lower than 25(or maybe 30)% because it gets auto disabled.
No, it always doesn't work... also when the battery is full...
hey, I had this issue too. Mine seemingly resolved itself, although I wanted to blame the BsB camera modes tweak.
Do you have any other software running/installed?
Have you tried a reset?
Happen to me also , I solved it by using clear storage in the setting option. Remember restore all you data and contacts before using this option. I recommend to use ''microsoft my phone'' as you will restore your exact files and contacts setting.Using clear storage will format and install new WM OS.
I've tried to turn off and turn on my phone, and it didn't work...
how do i save everything in my phone if i want to do hard reset?
install a flashlight program to check if the flashLED will work that way, If not, your set might be broken.
can someone give me a download of a flashlight program, please?
Related
My XDA II keeps turning itself on, as if a program is waking it up.
I have checked that no programs are running using the option under Start/Settings/System/Memory.
Is there a way to see what processes are running in the background?
It does this even when stationary on my desk so it's not an accidental button press.
Has anyone else experienced this?
I'd appreciate any suggestions on tracking this down as it has a huge impact on battery life.
Thanks.
yup... mine was caused by Activesync. Make sure you have all the settings set to "Manual".
You can also download "Notification Check" by Scarybearsoftware. It will go through your PDA and look for extra events that don't belong there.
For some time I was getting a calander event for some birthday that didn't even exist!
yep, here too
I notice that it turn on after upgrading from 1.66 to 1.72
I'm not sure that could be for this...
I'll try "Notification Check"...from scarybear software
I had this and it was doing my head in! But using the check notifications did not help. I thought that possibly some of the games I installed to my SD card may have caused the problem.
So I copied everything off the card, and formatted it in the pocketpc (resco explorer), not from a card reader! Then I copied everything back and since then not a single un-intentional turn on.
Cheerio
Howard
Well, it didn't fix it for me either. I'm now testing with the Storage Card removed.
I'll post back if I find anyhting.
Another problem is when your GPRS connection activates itself!! soo annoying.
Taking the storage card out made no difference.
So far, however, with Flight Mode turned on it seems to be fine.
If this is the case then that would be really annoying.
What would be going on with Flight Mode Off to cause the XDA II to wake up?
With the radio off, GPRS is also off (as is BlueTooth and IR).
Is GPRS turning the device on?
Immediately after the device powers itself on, tap the signal meter and see if GPRS is connected.
Do you have a POP3 or IMAP4 Email account set to retreive messages at a regular interval?
Thanks, I'd already checked those.
The radio off was a red herring. It woke me up at 02:06 for no reason that I coulod find, with radio off.
I'd really like to find this before doing a hard reset so that I can fix it again if necessary and posting here will help others.
There's nothing worse than curing a problem and you don't know how.
My feeling is that it is being caused by some program you have loaded . . . or worst case, by a combination of programs. Unfortunately, if that's the case, the most likely way to track down the culprit will be to -
1. Hard-reset your device.
2. Run it for a time with no additional programs installed to make sure the problem is gone.
3. One at a time, install a single additional program and run it that way for a while to see if the problem occurs.
4. Only after proving that the problem does not occur with that configuration do you install another program.
5. If the problem occurs after installing a program - Hard-reset the device again and install only that program - then you know if the program itself is causing the problem or if it is a combination of programs.
This does not necessarily sound like FUN . . . but I can't see a better way to positively identify which program is causing your problem.
HTH
Thanks for that. That is my thinking too.
I'll do that when I've got a few hours to spare and I'll post the results, identifying the offending program.
ON and OFF
I have the same exact problem.
And I did found out that this is some of the program I install.
Example : SPB Pocket Plus (also other Today's plugin)
I did a hard reset, and try with out any program, then ad one program, then two etc..........until I found out that SPB was the one.
unfortunatly I love some of the plugin, but I have to get rid of it, if I don't want my battery to fall off in one day.
Bruxelles5 wrote:
..........until I found out that SPB was the one.
Click to expand...
Click to collapse
This is curious, as I have SPB Pocket Plus 2.0 installed, and I have never experienced an unintended/spontaneous turn-on (of my imate anyway ).
try turing battery monitor off in sprite backup
and also turn off the battery bar thing in spb2
that sorted my probs out
Turning on
I use Pocketplus and don't have a turning on problem, except when cradled, in which case it continuously tries to sync, even with everything set to manual.
Don't think Pocketplus is the cukprit.
SMW1
Hi,
I have MDA Vario version of HTC Wizard.
After a ROM upgrade (to version 2.21.2.11) I have the following problem :
If I set AlwaysOn=1 in the registry, then GPRS is always connected as it should be - but when the device goes out of standby (by pressing (I) button or by an incoming call/message), the keyboard and touch screen do not respond for 10-20s. I can hear beeps when pressing keys but nothing happens (e.g. I cannot pick up a call...). After an annoying while, everything goes back to normal until a next standby-wake up cycle.
I've re-flashed the device with my operator ROM three times already, no other programs are installed (except customization stuff) and still have the same problem.
Before I decide to use some custom ROM, I'd rather try to find some other solution...
Any idea ?
regards
Maciek
AHHH me too
same setting applied and now i can i get a white screen after the tmob boot screen. when i call my phone it dosnt ring but the send & end buttons light up. the green signal indicator light is on too, and thats it. it also sleeps after a few min like normal, but the when i wake it up, the signal light is flashing but the backlight is not on. i really want to figure out how to put a txt file in the root of a card with instructions ot reinstall the backup reg i have. or get an activesync of my favs, list of apps, and outlook. any thoughts would be appreciated.....its my first ppc/wm device (xircom rex 6k --> handera 330 --> sharp zaurus 5500sl --> sharp zaurus 6000l --> HTC Wizard/T-mobile MDA Vario).
Resurrection
Hi - I am having a problem almost identical to the one in the first post. when my phone is in standby something happens which means it does not respond when turned on for about 20seconds, although it will anser a call. it's very annoying if you want to add a date quickly or send a text.
I have turned off gprs always on, removed any storage card plugins, and changed exchange server to only sync the last 3 days instead of everything. I am really a bit confused as tbis problem has only come about since I installed the tmob 2.26 rom and latest uk radio (after unlocking my phone) my phone previously worked fine with the current uk rom but was very slow toboot up. I don't really want to downgrade but i'm not seeing much option rihgt now. did anyone ever solve this?
any help greatly appreciated.
I am not really sure if this is a result of the GPRS ALWAYS ON settings - it just does not look that way!
I had a similar problem without having GPRS always turned on. After I reflashed the phone with exactly the same ROM again everything works fine. Did you booth install the CUSTOM ROM integrated in the flashed ROM as well or did you perform a SOFT RESET before it could install? The reason I ask is because of I think the problem is in the way how the WIZ writes / adds contents to the REGISTRY. It might have been that you resetted the device a bit too fast after HARD RESET or REFLASH and some of your REGISTRY KEYS are messed up!
If you have the possibility to perform a HARD RESET or REFLASH of your device: please try it and see if the problem persists! But please do not reload a backup afterwards because it would import also the faulty registry again ...
Please post your results afterwards, so, others would have a solution in future!
will give that a shot, although I did a completely clean install on this phone - no imported backups etc... is there any tool that can reset my registry to default settings?
the_angry_monkey said:
... is there any tool that can reset my registry to default settings?
Click to expand...
Click to collapse
Not really!
Depending on your phones ROM and CUSTOM ROM your registry will differ from others anyway, so, the only one way to get a 'default registry' is to perform a hard reset.
So I am having this new problem ever since I have data. When it is connected, which is all the time, it takes ~3-4 seconds to actually answer a phone call after pressing the answer button. If i turn off data, picks right up. anyone else ever have a problem answering calls with data connected?
If you dont have problems, can you please comment that you dont so i know other people's phones are working. thanks
Slow to answer calls
I am having the same problem. I noticed it first when I installed the 3.16 rom with GPS so wondered if that was the culprit.
i think it is occurring when you are connected to data. i turned it off and works better, but i dont want to have to turn my data off i just started paying for it and love having it.
friguy33 said:
So I am having this new problem ever since I have data. When it is connected, which is all the time, it takes ~3-4 seconds to actually answer a phone call after pressing the answer button. If i turn off data, picks right up. anyone else ever have a problem answering calls with data connected?
If you dont have problems, can you please comment that you dont so i know other people's phones are working. thanks
Click to expand...
Click to collapse
I recently started seeing this also.
I'll try turning the data off and see if it goes away.
By chance do you have Advance Configuration installed?
dwertz said:
By chance do you have Advance Configuration installed?
Click to expand...
Click to collapse
yes i do...oh no, why?
friguy33 said:
yes i do...oh no, why?
Click to expand...
Click to collapse
I do as well...
Perhaps I'll try uninstalling and see if there's a change. Or is this something else I should know?
well...i did a hard reset, installed everything BUT the advance configuration thing...all working great. Plus i had a problem with the backlight being disabled, now that works fine. guess that Schaps Advance configuration program screws up a lot. Thanks for thinking of it
Mine was doing the same thing and I looked all over and found in ppcgeeks that several people found that advanced configuration was the cause. You have to do a hard reset. I unistalled it and did a hard reset and installed all the same programs except that and bam the issue was fixed. What a pitty because I praise Schaps Advanced configuration. It makes it a lot easier to change settings. I am not sure of the exact issue or if it has been fixed but not installing it fixed my issue.
I cant find the link that I read before, but here is a link that states it too. Do a backup of your phonedo a hard reset install all the apps but Advanced Config and see if it helps. Worst case restore the backup.
http://forum.ppcgeeks.com/showthread.php?p=157682
or
http://pdaphonehome.com/forums/ppc-6800-xv6800/101646-delay-before-hearing-caller-hello-hello-hello.html #9
I'm having the same issues.
Delay only happens when data is active.
Running DCD 2.3.1, Radio 3.27, and I do have Advanced configuration installed.
I cooked in Advanced Config, so I have to reflash to take it out. If you find an easier way of isolating the problem I'd love to hear it. Otherwise I'll have to flash with nothing and add slowly till I determine the culprit.
My HD suddenly developed this strange problem where even though the backlight is set to auto in the power settings, everytime after a soft reset, it will go back to manual. I then looked into the settings and the "Auto backlight" is still checked. What I then have to do is uncheck and check the option again and the auto-adjustment will be working again.
I have tried hard-resetting the phone but the same problem persists, i.e. it always starts in manual backlight even though "auto adjustment" is checked.
I think this can only be either a hardware problem or the ROM file on the phone is corrupted. Is it possible for ROM files on the phone to be corrupted?
forumx said:
My HD suddenly developed this strange problem where even though the backlight is set to auto in the power settings, everytime after a soft reset, it will go back to manual. I then looked into the settings and the "Auto backlight" is still checked. What I then have to do is uncheck and check the option again and the auto-adjustment will be working again.
I have tried hard-resetting the phone but the same problem persists, i.e. it always starts in manual backlight even though "auto adjustment" is checked.
I think this can only be either a hardware problem or the ROM file on the phone is corrupted. Is it possible for ROM files on the phone to be corrupted?
Click to expand...
Click to collapse
This has happened to me in past and only solution I found was to flash another rom
I now noticed that it only happens when the charger is plugged in. Sounds very much like a hardware problem.
I am using the stock Telstra rom. Had flashed with the new Telstra rom but problem persists.
Hey guys I'm running Stock Rom with the latest Updates and i cannot turn of the wake on Touch feature I've turned it of in settings but it still works even in my pocket. Is there anything i can Do except a complete reset?
Tanks
Sent from my SM-G900F using XDA Free mobile app
There are multiple settings that have similar behaviour. So you need to disable all of them to do what you want. They are fairly obvious settings, you just need to take a minute or two to flip through the settings menu pages.
Another thing to try if you have any anomalous or unexpected behaviour is to wipe the system cache from recovery mode. This has no significant downside other than one longer than normal boot and will resolve a lot of one time glitches.
In the alternative, you could do a factory data reset but as you surmise that is a more drastic step and will delete user settings and files.
.