Related
Hello,
I have a problem with my G1.
I got my G1 maybe a month ago. It had firmware 1.1 and radio module 1.22.12.29. Back then I did not realize it was a radio image compatible with firmware 1.0 as far as I gather from the HTC website.
At first, I did not intend to root it at all, a decision later I would regret. Well, it worked OK, only it was not updated. I was told I would receive the update over-the-air in 4 days. At first they said it would be to 1.5, but it turned out my operator started to upgrade straight to 1.6.
And so I did receive it in 4 days and the problems began.
Basically, the voice quality is so bad that half of what I say is ununderstandable. My voice sounds metalic and I cannot have a coherent conversation over the phone. It is a business phone, so you can imagine it is rather annoying when I have to struggle to be understood by clients.
Ok, so I checked the bootloader for the radio image version and I found out it was still version 1.22.12.29. As per the HTC website I should have 2.22.19.26I. So, obviously the radio firmware was not updated as it should be as per the HTC website. Thus, it seems the reason voice quality is so poor is the outdated radio firmware.
Since I did not plan to return my new phone to my operator (I had no time for it), I decided to root the phone and update the radio firmware myself. It seemed simple enough and I use Unix and Linux since 15 years, so it seemed it would pose no problem.
Quickly I learned that rooting 1.6 is not so simple. One-click method fails. Only goldcard worked and after a few days of struggle I finally got back to firmware RC7 and rooted the device.
Right after I updated the recovery image to CM 1.4, but before I flashed the CM ROM I attempted to update the radio firmware as was suggested by one tutorial I followed as well as the CM website.
Well, it all went smooth. After the update I pressed Home and Back, it rebooted, back to recovery CM1.4, one more time Home and Back and I was back to the working phone. I checked the radio firmware and lo and behold, it was still version 1.22.12.29. No errors, nothing, smooth update process and no result. I repeated it at least 5 times to no avail.
I decided to install CM 4.2.7.1 ROM and try to update the radio then. Before the CM ROM I updated the SPL to HardSPL with success to have fastboot and went to install CM. It went smooth and I booted into this new rooted G1 ROM with ease.
Again, I attempted to update the radio firmware from recovery CM1.4 and again no results.
So, I am back to square one. I have again firmware 1.6 only from CM instead of stock HTC, and I cannot use this phone for calling.
So, summarizing, I got the phone with firmware 1.1, but radio firmware from 1.0. Why it was not updated together with the system I do not know. Then I got an update to 1.6 and the radio firmware also did not upgrade. Then I went back to RC7 (firmware 1.0), rooted the phone, attempted the radio firmware update before installing CM ROM and failed. And finally, I installed HardSPL + HTC 1.6 recovery (as suggested on the CM website) + CM ROM and again failed to update the radio firmware to 2.22.19.26I. The update process is going without any errors. Verification, extracting, installation of radio image all go OK, the phone reboots but no radio updated.
Anybody any idea why it is like this? Why this phone refuses to update the radio from HTC website.
Any suggestions?
Oliwer
PS. One more thing, I was contemplating updating the radio via fastboot, but it seems after reading HTC website that fastboot is only for system and recovery image flashing. The radio has to go first adn from recovery console. Am I right on this?
I too have a problem updating to the 26i version. however i rooted at 1.5 using the one click root method and ive since switched from cyan 1.4 recovery and cyan roms to amon recovery and dwang roms. No matter which recovery i use, the 26 update flashes without an error but shows up as the same radio ive had all along (1.22.14.11) i made a thread about it but noone seems to have an answer. Sorry I couldnt help, but at least bumped up your thread and maybe someone can help us.
speedysilwady said:
I too have a problem updating to the 26i version. however i rooted at 1.5 using the one click root method and ive since switched from cyan 1.4 recovery and cyan roms to amon recovery and dwang roms. No matter which recovery i use, the 26 update flashes without an error but shows up as the same radio ive had all along (1.22.14.11) i made a thread about it but noone seems to have an answer. Sorry I couldnt help, but at least bumped up your thread and maybe someone can help us.
Click to expand...
Click to collapse
Thanks for sharing!
At least I know I am not alone here with this problem.
Since it's Christmas and I have some more time, I decided to do a Nandroid backup and wipe my phone back to the original rom with 1.0 firmware (RC7).
I used my goldcard and I flashed it in a few minutes. I logged back into 1.0 firmware with the original bootloader and recovery console.
Next I put everything on my goldcard, flashed the recovery CM1.4 from the terminal, went to the bootloader, flashed update.zip with the newest radio 2.x from HTC, everything went smooth. Reboot and again NO change of the firmware. Tried a few more times flash the radio and HardSPL together to no avail. I restored my backup and found myself back to square one.
One think I noticed, and I wonder if you get the same, is that when I flash the radio, the phone reboots back to the recovery console and shows "Formating Cache..." message. It does not tell me anything like Please reboot, just this message. Meanwhile I can move the cursor up and down the recovery menu, so the phone has not hang up. It just sits at the recovery until I reboot it. Once I waited 30 minutes to see if it reboots itself and it does not. So, I press Home+Back and then it reboots fully and after loging in I check the radio and NO change.
So, I wonder if your phone does the same?
Oliwer
PS.
T-Mobile G1 - w/ ROOT
DREA110 PVT 32B
HardSPL 10.95.3000
Recovery image: HTC Android 1.6 (from HTC website)
Class IV 8GB SD Card w/ Ext 4 Partition and Swap partition
That's a huge wall of text, and it's Christmas so I'm a little merry
When flashing the radio image w/ Cy's recovery you must flash as an update.zip using alt-s, press whatever key you need to press to confirm and reboot using home+back. If you use flash any zip or use the trackball to reboot the radio image (or SPL) will not reboot in the required way to complete installation.
AdrianK said:
When flashing the radio image w/ Cy's recovery you must flash as an update.zip using alt-s, press whatever key you need to press to confirm and reboot using home+back. If you use flash any zip or use the trackball to reboot the radio image (or SPL) will not reboot in the required way to complete installation.
Click to expand...
Click to collapse
I tried all possible ways. Just a few minutes ago I went to CM1.4 recovery, used the update from update.zip, pressed Home+Back, rebooted back to recovery console, pressed Home+Back again, booted to CM4.2.10, punched the PIN code, checked the About Phone section and I am still with 1.22.x radio firmware.
This phone simply refuses to update the firmware in any known way.
So, my plan now is to un-root it back to the state I got it 2 months ago and return it to the operator and request upgrade of radio, since Donut with an old radio is basically useless. People simply do not understand half of what I say even if I speak slowly and quietly.
Cheers,
Oliwer
You have to press
Cam+power and it will show radio
....
In settings that radio has nothing to do with one installed...Do you know that the radio does?
It allows custom roms like cyan to be installed while keeping root access. The rom allows some tmo apps like account to still be used here in the states.
yes oliwer i get the same formatting cache message but nothing else happens. i tried in cyans recovery and amons recovery using only button shortcuts and not the trackball. i always named the radio update.zip, but still no luck. Im not sure if the 26i radio requires a certain version before it can upgrade, like maybe i have to upgrade to another radio before i can get to 26i? im not quite sure...ive run out of ideas on what to do. I dont have a warranty or anything on my g1. does the fact im using a donut rom on a cupcake radio have anything to do with it? if i had a cupcake rom and upgraded the radio to 26i from there would it work? i know these might sound like dumb ideas but im still relatively new to the scene and im running out of ideas as to why this is happening or why i cant solve it..
bump? anyone have a solution for us? or advice?
i just realized that i had android 1.1 with the 1.22.14.11 radio when i first got my phone, when t-mobile gave me the 1.5 update, i was still stuck on the same radio for some reason. After that I used the one click method to root and ive been on dwang donut rom ever since with the same dated radio...Ive tried using cyans recovery to flash and still no luck, no error, it says its updated but when i check the baseband or stock spl its still the same radio. I never went for a danger spl when i rooted because i was afraid to brick so i cant fastboot a radio update. I asked in another topic if it was possible to use the "flash_image" command in terminal to flash the radio but i dnt think itll work and i dont wanna risk it. If anyone has any advice or a possible solution please keep us updated.
Thank you!
Turn your phone off, hold the camera button down, and power on your phone.
What do you see?
each time before and after the flashing of the radio using cyans or amons recovery image id get the same rainbow screen saying
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.14.11
Serial0
so im still stuck on the Android 1.1 radio.
speedysilwady said:
yes oliwer i get the same formatting cache message but nothing else happens. i tried in cyans recovery and amons recovery using only button shortcuts and not the trackball. i always named the radio update.zip, but still no luck. Im not sure if the 26i radio requires a certain version before it can upgrade, like maybe i have to upgrade to another radio before i can get to 26i? im not quite sure...ive run out of ideas on what to do. I dont have a warranty or anything on my g1. does the fact im using a donut rom on a cupcake radio have anything to do with it? if i had a cupcake rom and upgraded the radio to 26i from there would it work? i know these might sound like dumb ideas but im still relatively new to the scene and im running out of ideas as to why this is happening or why i cant solve it..
Click to expand...
Click to collapse
I do not know, really, why the radio refuses to upgrade. Since my last message I have read tons of posts on this issue and nearly ALL people can upgrade the radio firmware easily, just like the SPL. Somehow, I can upgrade the SPL to whatever I want, but not the radio. Very strange indeed and no luck so far.
Oliwer
speedysilwady said:
bump? anyone have a solution for us? or advice?
i just realized that i had android 1.1 with the 1.22.14.11 radio when i first got my phone, when t-mobile gave me the 1.5 update, i was still stuck on the same radio for some reason.
Click to expand...
Click to collapse
Exactly the same in my case. Except they upgraded straight to 1.6. Before the upgrade I have 1.1 firmaware and quality of voice was perfect. After the upgrade things went south.
speedysilwady said:
After that I used the one click method to root and ive been on dwang donut rom ever since with the same dated radio...Ive tried using cyans recovery to flash and still no luck, no error, it says its updated but when i check the baseband or stock spl its still the same radio.
Click to expand...
Click to collapse
Same thing with me.
speedysilwady said:
I never went for a danger spl when i rooted because i was afraid to brick so i cant fastboot a radio update.
Click to expand...
Click to collapse
Well, I installed HardSPL and it worked despite the old radio. HardSPL offers FASTBOOT and I use it at times. This is safe, at least for me.
speedysilwady said:
I asked in another topic if it was possible to use the "flash_image" command in terminal to flash the radio but i dnt think itll work and i dont wanna risk it.
Click to expand...
Click to collapse
Well, I did, but it does not work since flash_image updates partitions and G1 does not have radio partition. So, when you try to update the radio.img it tells you no radio partition. It is only possible for Roger G1 since it has radio partition unlike all other G1s and there you could upgrade the radio with flash_image.
speedysilwady said:
If anyone has any advice or a possible solution please keep us updated.
Thank you!
Click to expand...
Click to collapse
Yeap! I just practised how to un-root the phone straight to 1.6 with the original SPL and recovery and I was able to restore my phone to the state before rooting and I plan to give it back to my operator under warranty and ask to get this radio fixed. I will do it next week. I will report if the authorized service will be able to upgrade the radio.
Oliwer
I have a black G1 with a 32b board,I found a rom online that was for the rogers dream,I didn't think it would flash the recovery image too,so I flashed it thinking if it didn't work I would be able to just flash to a different rom. That didn't work. it boots up as a rogers dream,and is fully working,but I can't flash back to anything else because it's a stock recovery image,and even though I had the engineering spl,it messed that up too,it still shows the skateboarding androids,but with a cyan stripe at the top of the screen and it won't even flash the htc images for the dev phone,or the normal rc29 DREAIMG.nbh. anyone have any ideas? fastboot tells me remote not allow,bootloader to the DREAIMG.nbh says either main version old,or model id mismatch,most of the time it's the main version thing though,and the recovery thing tells me no signature found if I try to flash the htc images and verification failed if I try to flash anything else that i've tried. anyone have any ideas? it was the 911 mandatory update from rogers that was supposed to also add sense if that helps anyone any.
1) THERE IS NO SUCH THING AS A 32A DREAM!!!!
32A means SOME HTC MAGIC, and ALL HTC HERO.
ALL DREAM 100% WORLDWIDE are 32B
*** NO EXCEPTIONS.
2) You need to provide more information: WHAT did you flash to the device.... SPECIFICALLY. And HOW DOES EVERYTHING IDENTIFY ITSELF, i.e. SPL, BASEBAND, KERNEL, etc., does the "su" command work?
3) I have ZERO expectations for you. Anyone with a screen name of "msnuser" is not worthy of android.
it's the rom from comment 102 on this page:androidforums.com/rogers/38624-rogers-update-911-fix-rogers-htc-dream-magic-ready-3.html the rom says on the recovery screen dream PVT-32A and it used to be PVT-32B. Not sure how it worked or how it booted,but the phone says it has 87mb free on the internal storage and it runs a lot quicker than it did on any rom I've ever used before,I just miss my rooted apps. I traded phones with my brother because he never uses rooted apps anyway,he was running stock tmobile firmware and was glad to have a faster os.
Hi all,
I just updated my Magic (Hutchison/3, Australia) (32A) to the latest official HTC firmware with sense ui (I had cyanogen on there before but it was too buggy for my liking). However, it seems that this firmware has the "perfect" spl (HBOOT-1.76.0008, Radio 6.35.08.29). I was planning to root the phone without flashing a different rom but i of course need write access to /system. My plan was to boot amon-ra's recovery to do this, however when i try and boot it with "fastboot boot recovery-RA-sapphire-v1.6.2H.img", i get told "FAILED (remote: not allow)" (same deal for the hero version).
My idea is to download an old sappimg.nbh and start up the SPL on the phone, which displays some messages about looking for that file when it starts up. I assume this will flash an older SPL; then, i install the system part of the new ROM but not the radio/SPL somehow (is this possible?) then follow my initial plan for rooting the phone
However, from what i've read it seems messing with the SPL is pretty much the only way to brick the phone. Is what i suggest safe/will it work?
Thanks guys
greeklegend said:
Hi all,
I just updated my Magic (Hutchison/3, Australia) (32A) to the latest official HTC firmware with sense ui (I had cyanogen on there before but it was too buggy for my liking). However, it seems that this firmware has the "perfect" spl (HBOOT-1.76.0008, Radio 6.35.08.29). I was planning to root the phone without flashing a different rom but i of course need write access to /system. My plan was to boot amon-ra's recovery to do this, however when i try and boot it with "fastboot boot recovery-RA-sapphire-v1.6.2H.img", i get told "FAILED (remote: not allow)" (same deal for the hero version).
My idea is to download an old sappimg.nbh and start up the SPL on the phone, which displays some messages about looking for that file when it starts up. I assume this will flash an older SPL; then, i install the system part of the new ROM but not the radio/SPL somehow (is this possible?) then follow my initial plan for rooting the phone
However, from what i've read it seems messing with the SPL is pretty much the only way to brick the phone. Is what i suggest safe/will it work?
Thanks guys
Click to expand...
Click to collapse
unfortunately wont work... it wont allow you to flash an older spl...probably will have to wait till an official 2.1 update comes out and hope that it might be rootable..
And THAT will teach me to look before I leap! I guess I can live with this update because its actually a HUGE improvement over what I was using before (radio reception is much better, text correction in the browser,sense is win in general and its much snappier) and I can still do usb tethering. But still, WHY DID YOU DO THIS TO US HTC!!!
EDIT:
I tried taking the rom image from the RUU and using fastboot to boot the boot.img from that but not even that works! I was thinking to do something like init=/system/bin/sh... I don't suppose theres another way to supply cmdline parameters to the kernel?
[Solved]
Hi there.
I got hold of this second hand phone.
I dont think its been modified in any way yet.
Last night the phone asked me about doing a update. So i did.
After the green progress bar completed i got to a white screen containing a green htc logo. And its stuck there in a loop.
So... I cant turn my device on... whyyyy? :'(
All i can do is to get into the standard htc recovery.
And into the hboot. Some place there it says:
HERO CVT SHIP S-ON
HBOOT-1.76.0007 (HERO10000)
MICROP-010f
TOUCH PANEL-SYN0104
RADIO-6.35.15.11
Aug 4 2009,19:43:30
I have done a wipe and a hard reset. Still it get this white screen on death. (WSOD) Im sodding of to bed...
You now know that it doesnt have a nandroid backup, and that I cant connect the phone via a usb connection to pc. And I dont have any custom recovery installed.
Ive tried to recover from a offical rom with a update.zip copied with a card reader onto the sd. Ive tried a few. The recovery see's the file. But when i try to install it it says "Verification failed Installation aborted"
Ive tried the recovery-RA-hero-v1.7.0.1.img, but without a usb I cant figure out how. Is there a way around for installing RA with just a sd card?
Please, does anyone have a good solution here.
Or some helpfull info to point me in the right way.
Sincererly,
Thor
See these threads similar,... Should be easy to sort.
http://forum.xda-developers.com/showthread.php?t=786938
and http://forum.xda-developers.com/showthread.php?t=787483
Good morning
Thanks, ive been looking at that.
My Win7 pc wouldnt show the ADB Interface in manage devices.
Only thing that pops up is a disk drive called HTC Android Phone USB Device, USB Mass Storage Device and a USB Composite Device.
Im gonna try this on my windows xp machine later today.
Hope it finds my phone, if not... what can i do?
So you need to update drivers as per the link in those threads,... Have you done that already pal?
Sent from my HTC Hero using XDA App
Hi again
Yes, I followed every step on that RUU driver guide on my win 7. But the drivers doesnt pop up as they should.
So I cant install the correct drivers since it doesnt show.
Halfway solution!
I got a breakthrough.
1. Remove the battery and replace it.
2. Hold volume down/up and tap power button. (htc enters hboot)
3. Taps back (enters fastboot)
4. Connects USB Cable (fastboot changes to fastboot usb)
5. Computer finds device My HTC.
Then i run this:
_HTC Hero_RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe
I got this from the htc pages. The software says i have ROM version 3.32.405.1
So i have a newer one installed then the one they have on web!?
I choose update on the software, now it tries to install 2.73.405.5
I got a half working usb connection now.
Fastboot restarted and changed to RUU USB.
Then i get a Error: 140 / 131 Bootloader version fail.
Can it be that the hard reset ive done messed up the bootloader version.
For me it looks like the phone is still in a new version ROM.
Anyone vise got anything to say about this?
Kind regards,
Thor
Aha,.... Ok, thats probs because the RUU you're using is older than the ROM already installed.
Try this one... RUU_Hero_HTC_WWE_3.32.405.1_R_Radio_63.18.55.06P_6 .35.15.11_release_signed.exe
That is the unbranded ROM,...
Wow
Suddenly everything klicked back into place!
Im past the white screen of death!
That RUU link was flawless for my device.
And the fastboot RUU USB installed everything.
Im back in business.
Much appericated m8
No problem. Now do us a favour and put [SOLVED] into your thread title. Thanks.
So...
Any suggestions on what i should do with it now?
Gotta root it i guess.
Then install recovery RA.
Any suggestions for a good rom to try?
Thanks again,
Thor
theres loads, but my suggestion would be villainrom 12 for a 2.1 sense rom, or froydvillain for a 2.2 rom
Ok
How do i know if i have a 2.1 sense rom or a 2.2 rom?
Or was that a dumb question from me, since you meant to install those?
Im kind of new, just left ye olde nokia behind
lol... Ok,... So you used the 3.32 RUU yeah? That is stock 2.1. If you used the other one, that is 1.5. Use BTDAGs guide in my sig to find out how to flash custom ROMs.
I also recommend Villain 12 for 2.1,... Or Froyd for 2.2. Depends if you like the SenseUI or not. Take a look at both in the Dev section.
Ok
Yes, I definitly want to have the Sense UI.
So then i wanna try out installing a villainrom 12 on a 2.1 sense rom.
Settings - Software Information now says:
Firmware version: 2.1-update1
Baseband version: 63.18.55.06PU_6.35.15.11
Kernel version: 2.6.29-063c4d24 [email protected] #1
Build number: 3.32.405.1 CL191507 release-keys
Software number: 3.32.405.1
This is what i have on it now.
I tried doing the phone software update again, when it asked me again.
Got the same error. So I did the usb install over again. All ok again.
Note: The update it tries out is 3.32.405.2 (5.87MB)
So... can i follow BTDAG's guide from here?
Or do i have to downgrade or update something first?
Guess i have to choose Superuser for Android 2.0~2.2 when i do the rooting with androot.
I got a problem in that guide when typing su in the terminal window.
I didnt get the "Super User Request Prompt" as it told about.
Ive now tried terminal from both usb and the terminal emulator.
WHen i try to do the SU or the flash_image recovery command i get permission denied!?
Without su rights i can do the flash_image recovery /sdcard/recovery.img command, since i need the su permissions.
Thanks again,
Thor
Hi again
I cant seem to get the SU rights i need.
Ive used universal nandroid for the rooting! (it tells its now ok)
But i cant flash in the custom recovery image.
Ive now tried a different approach:
1. Installing the ROM Manager and trying out ClockworkMod recovery(its installs ok)
2. Then I boot into recovery by holding the home(house) and power on, I get the white screen of htc death again and it goes into a black screen with a red triangle and a ! on it.
3. Then I release home and power on.
4. Presses down volume up and taps power on.
5. The hero boots into the standard recovery!?
(I think the way im starting up, are reflashing the recovery. am i right?)
Clockwork also have a "flash RA 1.7 recovery" option, ive tried that one too.
But with the same result...
Any one know about this?
Best regards,
Thor Elvin
Solution for life!
After a lot of surfing i found it!
This great tut worked for my device:
http://www.villainrom.co.uk/forum/s...o-Root-The-2.1-RUU-or-OTA-Update-For-The-Hero
I got a blue carebear in the background, and im making a big grin!
Now im rooted and backed up.
Great thanks to Pulser for a great tut.
Edit: VillainROM12 installed 1
PEACE Y'ALL!!!
QUOTE=thorelvin;8284640]After a lot of surfing i found it!
This great tut worked for my device:
Pulser did...
I got a blue carebear in the background, and im making a big grin!
Now im rooted and backed up.
Edit: VillainROM12 installed 1
PEACE Y'ALL!!![/QUOTE]
Dude, nice that you got sorted. I have kids so Carebears are good to have around. Respect to Carebears, and at the same time it would be cool and revisit the forum and thank Pulser, else thank him here as Pulser_g2 (i think). He sort of wrote, reworked the tut originally from the cdma version here. Sorted me too going 2.1 to 2.2. I had shedloads of fun with roms in between but its only thanks to him.
I guess this could be classed as one of those "Circle of life" philosophy budhist type **** things cuz the answer was really where you started, but for me... its all about takin care of the Carebears....
For the record his contract ends around May so get your Hero fix requests in early...!
Soz Pulser... And massive thanks for the opening to a new dimension for my hero...
I've flash with a froyo rom , and now, I just want to get back to eclair or a baked froyo, that rom is full of problem : not a real android market(htc market) chinese apps, and the worst : I can't use the web browser but I can get my emails.
So if someone got an idea to root that rom or to roll back to a previous version , I'm open to your propositions.
I've already try with unrevoked/an other RUU rom (with and without a goldcard).
I used the froyo rom from shipped-roms
You need to do a full wipe from recovery before flashing the new rom.
thanks for the idea ;
I've tried, but the recovery mod doesnt load properly.
unrevoked shows that somes files aren't found while it's pass from HBOOT to HBOOT USB PLUG , and i'm not able to select recovery with the volume button in the HBOOT menu.
I think you have to wait for alpha rev :/
Same thing happened to me. Now my phone is not syncing Google or facebook contacts. The rom is very much limited. What i foundout was, the ruu update. Has also upgraded the hoot to version .83 from .80. That is the reason other ruus and unrevoke crash. Downgrading the hboot will do the trick. There are methods avaiable for desire but im not. sure they will work with. Wildfire. If the hoot is same for desire and wildfire rename the zip file. As PC49IMG.zip should downgrade the hoot. Any help is apnpreciated.
alparev will not help cos u need root for it, least on website is info Requirements:
The only requirement right now is that the ROM you're running is rooted.
adrienlm said:
unrevoked shows that somes files aren't found while it's pass from HBOOT to HBOOT USB PLUG , and i'm not able to select recovery with the volume button in the HBOOT menu.
Click to expand...
Click to collapse
yes, becos adbd is in other place, not in system.img as usual but in boot.img and adbd is different from every other adbd