[help]flashing hd2 with custom boot and splash images - HD2 Windows Mobile 6.5 ROM Development

Hello everyone.
I was going to learn how to flash my hd2 to personalize boot and splash image.
I can't deny that i'm a bit confused.
I readed some guide here, like 'how to flash everything' and 'flashing your first leo 512mb' but there is not explained how to proceed to change boot and splash images.
Let's go then to know more about it.
First at all i got that i need to install HSPL2 on the device.
Doing this, we will able us to flash everything on the hd2.
But there are also other progs that i do not undestand if i can use instead the HSPL2, like leo_CustomRUU, or SSPL_RUU.
Maybe can be helpful if someone tell me/us ( noobs ) what is better and easy to use.
After this, there are two 'images' that we can personalize:
-the first is when we turn on the device, with the htc logo and the hand writing word;
-the second, the Windows word on the red desktop color.
The first is the boot image, the second the splash screen.
Is it right?
Okay, if it's correct, i suppose that we need to 'operate' on two different kind of 'image file'.
I downloaded a .zip file that contains various kind of images ( static ) with .nbh extension.
That are splash images, so it will change only the splash image.
I don't know if i can use it directly without rename it, if i must put that file in a specific position on the device or only in the sd root ( formatted ), and then launch the progs ( what kind? ).
Yes...need help for this.
Thanks
p.s sorry for my poor english

hspl2 unlocks the phone for flashing.
sspl is a one shot alternative to hspl, you don't need it.
customruu is a slightly altered version of the rom loader that comes with official roms. it is altered to allow flashing cooked roms.
you flash boot image just like roms, and it is actuallya small rom.(no hard reset needed, doesn't affect your rom at all.)
there are three parts to the boot screens, as you correctly noted, only the first part is flashed, the second and third are changed within your setup by cabs or replacing image files.
start here
forum.xda-developers.com/showthread.php?t=625911

samsamuel said:
hspl2 unlocks the phone for flashing.
Click to expand...
Click to collapse
ok.
then first at all i need to install it on the device for flashing .nbh images.
right?
sspl is a one shot alternative to hspl, you don't need it.
customruu is a slightly altered version of the rom loader that comes with official roms. it is altered to allow flashing cooked roms.
Click to expand...
Click to collapse
i see.
well i downloaded HD2 splash screen V1.zip ( inside the link that you posted here ) and inside it there is already Custom_RUU.
I think then that i must use it to flash the custom splash on the device.
Right?
and...i must put the .nbh file not inside the sd card, but in the device root.
right?
you flash boot image just like roms, and it is actuallya small rom.(no hard reset needed, doesn't affect your rom at all.)
there are three parts to the boot screens, as you correctly noted, only the first part is flashed, the second and third are changed within your setup by cabs or replacing image files.
Click to expand...
Click to collapse
well i thought was just two, as i wrote in my first post.
the white with handwriting and the Windows on red background color.
start here
forum.xda-developers.com/showthread.php?t=625911
Click to expand...
Click to collapse
thanks

i successfully installed HSPL ( not hspl2 ) on my device.
Now i'm trying to flash the device with an .nbh image, for the splash screen.
My doubt is:
1- where to put the .nbh file
2- if i need to copy custom_ruu.exe also inside the device where is located the .nbh file and then launch another copy of it from my pc.
I did it but the custom_ruu.exe tell me to upgrade the rom from 1.66 to 1.0...
a bit strange i think....or not?
thanks

to flash roms and splashscreens - put the nbh into a folder with customruu (customruu usually comes with the rom, if not use one from another download, all customruu.exe's are the same)
just those two files in folder, run customruu as administrator, done.

samsamuel said:
to flash roms and splashscreens - put the nbh into a folder with customruu (customruu usually comes with the rom, if not use one from another download, all customruu.exe's are the same)
just those two files in folder, run customruu as administrator, done.
Click to expand...
Click to collapse
done
i was a little afraid when the app told me to 'update' the rom to 1.0 hehe.
ok then, it's flashed
well, it's also possible to modify the Windows on red background image in some way?
i just installed an .nbh image that allow me to modify the standard htc logo, then a .cab with a post simulation ( like a pc post; unfortunately if i do an hard reset i must reinstall it.... ), but i didn't found nothing for the Windows on the red background colour.
Thanks a lot again for your support

hehe, ignore what it says in the update version bit, its usually blank or wrong.
about the other two images, and re: ' have to reinstal it when hard reset', , , well yea, cos theyre adjustments to the loaded rom, the first part is unconnected, youd get that even if there were no rom, after task29 for instance.

samsamuel said:
hehe, ignore what it says in the update version bit, its usually blank or wrong.
about the other two images, and re: ' have to reinstal it when hard reset', , , well yea, cos theyre adjustments to the loaded rom, the first part is unconnected, youd get that even if there were no rom, after task29 for instance.
Click to expand...
Click to collapse
got it
do you know if it's possible to change also the Windows word on the red background?
it's the last image that appear before the sense interface start to load.
i didn't find thread that talk about the possibility to change it or not.
thanks

sorry no idea, i've never tweaked that. i flash too often for it to be an issue.

samsamuel said:
sorry no idea, i've never tweaked that. i flash too often for it to be an issue.
Click to expand...
Click to collapse
ok then.
i'll bump this thread with the hope that someone can help us.
The last question is:
it's possible to change with a flashing ( maybe permanent modify then ) the Windows word on red background?
Thanks to you sam for your help, and to those that will answer to this last question

The windows splash screen is a file called welcomehead.png in the windows directory. Just replace this with an image of your choice and it'll be changed.

im pretty sure i can answer that question as no, you cant modify it so that it survives a hard reset without cooking, and then flashing the cooked results, you cant modify the rom. you would need to get the rom in a kitchen, repolace the images, cook the rom and flash it.
In reality, of course, all you need do is keep your replacement images on your sd card, then copy them back after the hard reset.,

in fact i tryed to delete the welcomhead.png, but nothing to do, even if i change the permission with total commander...
i think that there is no easy way to replace it ( aside to cook a ROM with a different image and then install the modified ROM ).
i think ill give up about this...ill keep the standard ( and not really good looking ) Windows word....
thanks to you all

rather than delete the original which you can't cos it's in the rom, just copy replacement over it, that should work.

O2 splash screen
bump... related questions:
1. It's been a while, when I had the TP1, I used Schaps Advanced Config v3.3 to change the 2nd and 3rd items, does v3.3 still work for the HD2 ?
2. Does anyone have the O2 Splash screen GIF with animated rising bubbles? I had it in a samsung flip phone, searched but could not find a WVGA one. Searched Youtube came up blank. something like this on the O2 XDA
3. These are the 2 threads I used on the TP1, I don't think the HD2 has an equivalent thread:
Touch Pro Splash Screen Repository and
Touch Pro Steps to change your 1st Splash screen

Related

Replace Windows Logo image

Please could someone tell me how the windows logo image (that appears after the boot splash image) can be replaced?
Although there are some threads about how to replace the boot splash image (that normally is operator-related) I couldn't find anywhere how to replace the windows logo. This logo is displayed after the boot image slpash for quite a long time (I think it's even longer that the boot image). I hope that this is so simple that everybody knows how to do it, so please help.
thank you!
Yes I want to know too !!
The utility on buzzdev is only for the Universal (qtek9000)
Yes!!!
I really, really, really would like to understand how to do this too...
I already changed the boot image and i skinned the whole windows mobile 5.0 look, incl. the phone dialer tool.
The only thing that is bothering me is when i reset my qtek 9100, right after my very nice boot image (in black) the stupid blue WM5 apears for a while, only to go back to the black look of my today screen.
So any help would be nice.
Thanks all.
Be happy!
Hello,
I hope you mean this.
The file in the windows directory is: welcomehead.96.png
This file is only diplayed when password is enabled.
Make a new image in Photoshop, imagesize is 320x320.
And save it as welcomehead.96.png
Then copy it to your ppc. and from there copy it into windows.
Good luck
This is the one I use
Too easy...
Man... cau u imagine how much time i spend figuring this one out???? If i only knew it would be so easy.
But after a while one does not remember wich procedures one already tried, so i guess i just changed the file as you said and it worked.
Somehow i thought the file was in ROM and could not be overwriten.
... strange thing
stay well all and many tkx.
Re: Too easy...
ajfper said:
Man... cau u imagine how much time i spend figuring this one out????
Click to expand...
Click to collapse
Man you could save much time by looking through the wiki pages for ur device
Whooooo Thanks a lot , aage !!
Have a Good week
Yoohoo.. it worked. Moving it with File Explorer to the Windows directory didn't work. Installed the free Total Commander and tried again. And succeeded. Changed the properties tot hidden, readonly and system.

I need SERIOUS HELP, Help ME!!!!!!!!!!PLEASE

I have a Mogul. That was Running 2.17 Official, tried to install DCD 2.1.0SPRINT, Said it installed successfully, on reboot it GETS STUCK IN HTC BLACK SCREEN. I tried to run RUU, GET ERROR 260. I can't connect through activesync either, Then I read To try to flash through SDCARD the official 2.17 renamed To TITAIMG. IT GET STUCK IN LOADING SCREEN, WHICH I LEFT RUNNING FOR OVER A HOUR, I ran out of ideas, and I hope I didn't brick My month old phone PLEEEEEEEEEEAAAAAAAAASE HELP ME
Did you not read any directions or other posts?
You need to make sure you have the new radio, otherwise any rom that is 3.16 based will do this.
Flash original 3.16 to get the radio on the phone then do DCD's rom.
Also, try not to post retarded type like that makes it really hard to understand what your trying to say.
THANKS
Well thanks I guess, and I ll will try
Go into bootloader mode before flashing to ensure a good flash.
That has to be a .nbh renamed To TITAIMG right, and if so do you have a link. For some reason mine is a .exe
JonnyBoy313 said:
That has to be a .nbh renamed To TITAIMG right, and if so do you have a link. For some reason mine is a .exe
Click to expand...
Click to collapse
Open it up with winrar (or similar) to get the nbh file. Dude this is all pretty obvious stuff remember to do some more research into the device and its quirks before doing anything else
Man I looked In the winrar, And only 1 thing is in there and it was
3.16.651.0.exe. That is why I asked for a link to the right one, and I reaserched this and other sites for four days before I tried this.
It was the best I can do without hands on, Sorry to be such a burdan.
But I though this site would help me.
JonnyBoy313 said:
Man I looked In the winrar, And only 1 thing is in there and it was
3.16.651.0.exe. That is why I asked for a link to the right one, and I reaserched this and other sites for four days before I tried this.
It was the best I can do without hands on, Sorry to be such a burdan.
But I though this site would help me.
Click to expand...
Click to collapse
Extract the exe then take a look inside that one?? We aim to help all users but it is a two way process dude
Not sure if I have A good version of 3.16
sorry I dont know tried to open but a little black screen flashed.
Should i look for a different 3.16 rom.
Every other rom I have Has a .nbh
yea my 3.16 must not be real. Might be a dumb question, but I just want to ask. Can you flash a .exe on your phone
Sorry for any confusion, Can flash .exe through sc card
Your making it harder than it is.
1) Extract the exe via winrar.
2) Manually enter bootloader mode
3) Run the upgrade from a Windows XP Machine to be safe (just run the exe).
4) Let the device start
Fixed your phone in 4 steps.
cohowap said:
Your making it harder than it is.
1) Extract the exe via winrar.
2) Manually enter bootloader mode
3) Run the upgrade from a Windows XP Machine to be safe (just run the exe).
4) Let the device start
Fixed your phone in 4 steps.
Click to expand...
Click to collapse
Don't forget step 1.5: Connect the phone to the USB port on the Windows XP machine.

Polaris Splash

Hi All,
first: I know there was just few posts ago same thread.
BUT!
What i really want to see here(We r in Polaris section not Kaiser)
is proper tools and proper explan. how to build and flash Splashes for Polaris.
I tried to do that with info given in Kaiser branch but no luck(mostly coz i was affraid to brick my cruise)
I have to deal with noobs every day at work (i put myself in noob cat. when it concerns phones-flashing-and etc.) and the only way to help them when screeming at u saying that u r as..ole and dont want to help--- is to draw them a "PICTURE" with what they have to do.
So.
Im nOOb here and i'd love to see that PICTURE.
It'd be nice if someone who knows this stuff and does it every day, would make some PrintScreen of the whole proccess of creating and flashing splashes for Polaris.
Thanx alot to all of u who makes our(nOOb's(but willing to learn)) lives more interesting
Cheers lads
Don't know about changing the first HTC splash screen but the Windows one that loads after it really got on my nerves...so if you want to change just that one this app worked for me.
It basically unlocks the file welcomehead.96 in the Windows folder. You can then overwrite it with a picture of your choice (renamed "welcomehead.96"), saved as a .png image and resized to 240x320 (I used Paint for this).
Hope this helps a little.
cheers dude.
SubSplash Flash
Hi, here is a group of very useful tools that load any image you like into the boot loader creating your own splash
There is an interesting thing: another Splash after the first one called Subsplash (when showing radio and rom versions) that is tricky to replace. It has place at the address 0x601. So, you have to edit htcrt_devices.ini file by changing the address wherever you read 0x600 put 0x601, look for your device (or change them all in the list just in case). Only then you can produce the RUU_signed.nbh. After that, replace into ROMUpdateUtility folder and flash. Try it. Almost one day to find out how to get rid of that awfull image from Claro Argentina! Hope this helps.

Some general questions

Hi guys,
I just ordered my Herald and want to ask some questions before it arrives.
1. What exactly is the advantage of the modified ROMs except for the look?
2. I've often read about some functions not working like MMS, true? (I'm from Germany and using a simyo simcard (E-PLus) )
3. Touch-It / Cube? Just some "Designs" or what is behind that?
4. Touch-Flo, reminds me of the iPhone. But I guess the Herald isn't really capable of it, is it?
5. I'd like to use my pair of 3,5mm earphones and I know I have to get this MiniUSB-->3,5mm Adapter, but I wanted to know if the sound quality has to suffer when using this adapter and does it matter which one I buy (on ebay)?
Well, thanks in advance. I know it sounds a little newbie, but you all started sometime right?
Greets,
sanchez
xtc.sanchez said:
Hi guys,
I just ordered my Herald and want to ask some questions before it arrives.
1. What exactly is the advantage of the modified ROMs except for the look?
2. I've often read about some functions not working like MMS, true? (I'm from Germany and using a simyo simcard (E-PLus) )
3. Touch-It / Cube? Just some "Designs" or what is behind that?
4. Touch-Flo, reminds me of the iPhone. But I guess the Herald isn't really capable of it, is it?
5. I'd like to use my pair of 3,5mm earphones and I know I have to get this MiniUSB-->3,5mm Adapter, but I wanted to know if the sound quality has to suffer when using this adapter and does it matter which one I buy (on ebay)?
Well, thanks in advance. I know it sounds a little newbie, but you all started sometime right?
Greets,
sanchez
Click to expand...
Click to collapse
1. The modified roms run A LOT faster and more efficiently than the stock rom. Plus the roms give you a lot more options, and easier to tweak.
2. Some of the roms when flashed will require a fix (which is easily found) in the forum.
3. Not sure what you are asking
4. Yeah, the wings can run it fine. I actually like the touchflo cube. It makes it easier to use your phone with one hand. Runs smooth though. There are some mods you can download you can install and make the phone look and act identical to the iphone if you want....I don't care for the iphone but to each their own.
5. Well, anytime you use and adapter with an electrical signal, there will be some signal degradation, but I don't think it will be enough for you to notice.
Hope this helps.
Thanks a lot dougstoner,
Touch-It is a rom often mentioned here (right?), I guess it is an example of the modified roms, which, as you say, run a lot faster and smoother.
Is there a tutorial on how to "flash" another ROM and can I backup the one that's on my phone atm, the stock one so to speak? Of course I lose warranty when playing with the rom, but I can put it back to the default initial state can't I?
Well I guess I'll have to read a loooot more here.
EDIT1: As I already said, I do not own a HTC Wing (T-Mobile) but a Herald directly from HTC and a german prepaid card, but that should not affect my decision on what ROM I use right?
xtc.sanchez said:
Thanks a lot dougstoner,
Touch-It is a rom often mentioned here (right?), I guess it is an example of the modified roms, which, as you say, run a lot faster and smoother.
Is there a tutorial on how to "flash" another ROM and can I backup the one that's on my phone atm, the stock one so to speak? Of course I lose warranty when playing with the rom, but I can put it back to the default initial state can't I?
Well I guess I'll have to read a loooot more here.
EDIT1: As I already said, I do not own a HTC Wing (T-Mobile) but a Herald directly from HTC and a german prepaid card, but that should not affect my decision on what ROM I use right?
Click to expand...
Click to collapse
Yeah man...no problemo. Touch it is one of the roms here...but there are a LOT of others to pick from. Personally, I've tried just about all of them, and they really all have their pluses and minuses, but I really like the open touch series. Yes, you will see I big difference from the stock rom to the custom roms in here. Plus, you can run this program called batterystatus, and it will allow you to overclock your phone to run even faster. I run mine at 273 Mhz and it's stable.
Yes, there is a tutorial on how to flash. There are a lot of options, but some of the roms require a hard spl. Most of the open touch series do not require this, so that's my recommendation for flashing the first time. Eventually, you will want to hard spl so it's easier to flash, but you have to be careful when you do this, because, you could end up bricking your phone.
Here is the link to reviews of each rom
http://forum.xda-developers.com/showthread.php?t=395793
Here is how to flash Open Touch 3.0
How-To Flash the HERALD-USPL-beta3:
Download and extract both files.
Place the extracted Open Touch v2.5 Biggy.nbh into the Herald-uspl-beta3/RUU folder.
Move the entire Herald-uspl-beta3 folder to the root of the c:\.
Follow the simple readme file.
Break down of how to flash this rom:
Then follow these steps:
II. How do I flash an NBH file?
a. USPL
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
***Yeah, it really doesn't matter if you are using a Herald or Wing really. The only issue you will run into is sometimes the keyboard doesn't get mapped properly, but this is usually the issue for the wing and not the herald.
Oh, and yeah, you can always reflash to the stock rom, so if you have to send it in for warranty work, it will be covered. Welcome to the forum, and if you have any other questions, just private message me.
Thanks again buddy, I owe you something!
You say the hard spl method (as posted below right?) is easier but I could end up with a bricked phone. But what is "the other method" then?
And with a overclocked cpu, how much will that effect my standby time or the time until I need to recharge?
xtc.sanchez said:
Thanks again buddy, I owe you something!
You say the hard spl method (as posted below right?) is easier but I could end up with a bricked phone. But what is "the other method" then?
And with a overclocked cpu, how much will that effect my standby time or the time until I need to recharge?
Click to expand...
Click to collapse
No, the method I posted was the USPL method, which is easier to do. I don't think it's even possible to "brick" your phone using the uspl method. Just a note, before you hard spl, do a LOT of reading first. It's really a simple process, but you want to make sure you understand it first.
Oh, with your phone overclocked, you won't notice a difference at power really at all. Your phone will only overclock when the phone is on. When your phone is asleep, it clocks down to the standard speed.
aah , ok so the "hard spl" method is not the "uspl method", when you say "you might want to hard spl your phone, so it's easier to flash", what do you mean by that?
So is this right:
I need Hard SPL to some kind of "unlock" the phone for being able to flash unsigned ROMs?
USPL temporarily cid-unlocks your phone (allows custom roms to be flashed) while HardSPL is more permanent (you'll never brick your phone due to a bad rom flash, and it can be removed)
Ah ok so obviously it seems better to use HardSPL right?
yep
loads better
xtc.sanchez said:
Ah ok so obviously it seems better to use HardSPL right?
Click to expand...
Click to collapse
Well, yes and no. In the long run, it's better to Hard spl your phone. A lot of the roms in the forum require hard spl first. If you somehow fail during the hard spl, then you end up with a "brick". I used the uspl method first to flash, and it was a little easier to do, but hard spl'ing insn't complicated either. You just have to make sure of your ipl number is higher than 4. You can check this by holdign down the camera button, and press the soft reset button (use the stylus on the side to press) and continue to hold the camera button until you get to what's called the bootloader screen. It's red, blue, and green. Here are the instructions for hard spl, but MAKE SURE your ipl number is hight FIRST. If it isn't, you will brick your phone.
I case of people who don´t read 200 post and still brick their device - here is the guide that worked for ALL people with:
HTC P4350
XDA Terra
WING
with IPL 4.xxx and higher!!! (that is IMPORTANT)
and then follow this:
Default
For me it was working when:
1. install canonyang.cab
2. install aserpolicy.cab
3- install disablesecurity.cab
4. SOFTRESET
5. run RUU from Hard-SPLWM6 folder verison 4.70.yang
6. screen will become white - WAIT until it reboots itselfe.
7. done!
check if SPL now is 4.70.yang
Fore sure: I used this
http://rapidshare.de/files/38148213/...l_WM6.rar.html
mirror: http://www.sendspace.com/file/ot8zsn
It worked for many others, too.
Quick question:
What are the most recent ROM releases? I'm having a hard time finding what is the most up to date release of certain ROMS and just what are the newest ones in general.
So Open Touch and Touch-IT are the favs?
Minker17 said:
Quick question:
What are the most recent ROM releases? I'm having a hard time finding what is the most up to date release of certain ROMS and just what are the newest ones in general.
So Open Touch and Touch-IT are the favs?
Click to expand...
Click to collapse
Well, they are probably the most popular, and the latest Open touch is v 6.0 diamond. But, I have tried every rom on here and they are all good, it's more of a preference really. There will be a new release tomorrow of 6.0 with the windows mobile 7 theme. I think the latest touch it series is the diamond beta I think.... You can check out pureskillzzzz review on each one.
http://forum.xda-developers.com/showthread.php?t=395793
Another question:
I guess all of the ROMs are in english language, is there any possibility to change the language (to german)?
thanks
K bootloader says:
IPL 4.17.0002
SPL 4.17.0000
xtc.sanchez said:
K bootloader says:
IPL 4.17.0002
SPL 4.17.0000
Click to expand...
Click to collapse
You are good to go....as long as the first number is 4, and not 1. Hard splice first, then you can flash to any rom you wish. When does your phone arrive? You should try out ttrans newest rom open touch v 6.0. I really like it.
Yea but I have to get a SDMicro Card first... Doesnt work without right? Or is there any chance?
EDIT: I got my phone about 2 hrs ago.
you don't need an sd card to hardSPL your phone. You need one to sd-flash, though
xtc.sanchez said:
Yea but I have to get a SDMicro Card first... Doesnt work without right? Or is there any chance?
EDIT: I got my phone about 2 hrs ago.
Click to expand...
Click to collapse
No, you don't need one to flash or hard spl, but you will def want to get one soon and install all your programs on it. Good luck flashing!

[REF] Task 29 (format) without drivers, without mtty.

Hi,
(To make it short, follow the red sentence to format your phone to avoid roms problem.)
I hex-edited RomUpdateUtility.exe so it runs task 29 right after flashing ruu_signed.nbh
Task 29 formats your phone memory (=binfs). It prevents weird error appearance when you flash new Roms.
But you stile need something to flash, it may be a radio, a splashscreen nbh or a blank nbh file (shadrack repack provide a tiny blank nbh).
Usually you don't need anything more than the file provided in the packs. so:
Just unzip and run task29.exe .
Eventually, you may replace ruu_signed.nbh with the radio/splashscreen of your choice.
When update status reach 99%, press vol down button, and keep it pressed until the phone reboot to the three color bootloader.
After the phone reset itself, your old rom will be gone, so it can't boot to winmo: binfs has been formated, your phone memory is clean.
if you fail to press vol down key and your phone get stuck on the white screen, just remove your battery, then try again: press power, and keep vol down pressed immediatly next, until the phone get to RVB bootloader.
When your phone is back to RVB bootloader screen, use the leocustomruu.exe provided with your favorite rom package to flash a new rom, or flash it from memory card using standard procedure.
Repack by ShaDrac (Recommended):
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
No radio needed, smaller, faster.
Video tutorial by [★]
http://forum.xda-developers.com/showthread.php?t=621930 (Video 9: How To Perform A Task 29 Without MTTY)
direct link: http://www.youtube.com/watch?v=DtTDuc4V4cU
To do:
remove the "reset" command from task29.exe, to stay into boot loader screen. Then, one should flash the new rom immediatly using their cook's flash utility.
Original files
http://www.megaupload.com/?d=J3OELQ8I
RS mirror, by Sardelisp
http://www.rapidshare.com/files/361617741/Radio_2.08.50.05___task29.zip
Edit, distribute, repack, comment and spread these files as much as you want.
So with this tool you can only flash the Radio? Then we have to use the other RUU_Custom.exe to flash the ROM?
Great
Great work thanks.
great work m8, gonna give it a try.
ammmm interesting
bobsbbq said:
So with this tool you can only flash the Radio? Then we have to use the other RUU_Custom.exe to flash the ROM?
Click to expand...
Click to collapse
exactly.
this is because flash utility needs a nbh file to write to the phone before sending task 29. as task 29 removes roms but not radio, and radio are quicker to flash, i choose this way.
am gonna try it too..
so we can replace the *.nbh radio with one we want every time and then flash it to the device..So a task 29 will format the memory and then we can flash as normaly the rom..
Great...thanks!!
or if you don't want to flash a radio then you could just put a splash nbh
sardelisp said:
am gonna try it too..
so we can replace the *.nbh radio with one we want every time and then flash it to the device..So a task 29 will format the memory and then we can flash as normaly the rom..
Great...thanks!!
Click to expand...
Click to collapse
great tool, but with mtty task 29 it takes a couple of secs to do this on a winxp machine.
i guess it would be more handy for vista/win7 users.
megaupload gives an error!
OrionBG said:
megaupload gives an error!
Click to expand...
Click to collapse
It gave me a error the first time but the second time it was ok.
Works great here Thanks,
bobsbbq said:
It gave me a error the first time but the second time it was ok.
Works great here Thanks,
Click to expand...
Click to collapse
"The file you are trying to access is temporarily unavailable." This what i get every time!
i uploaded to rapidshare..here is the link..
http://rapidshare.com/files/361617741/Radio_2.08.50.05___task29.zip
sardelisp said:
i uploaded to rapidshare..here is the link..
http://rapidshare.com/files/361617741/Radio_2.08.50.05___task29.zip
Click to expand...
Click to collapse
Thank you!
doloop said:
Hi,
I hex edited RomUpdateUtility.exe so it runs task 29 right after flashing ruu_signed.nbh
Click to expand...
Click to collapse
Great job doloop!
I'm downloading now, creating batch file to flash with this and there after with my rom!
Maybe I have to say goobye to my stylus...
And check if my battery cover fits on my HD2.
Thanks!
ShaDrac
if someone could provide me with a blank, but valid nbh, then help me to repack all this stuff into a single exe, it should be a great step ahead.
gianton said:
i guess it would be more handy for vista/win7 users.
Click to expand...
Click to collapse
That is exactly what came to my mind when I saw this. Right now my (And I belive most ppl.s) option is to either start up my net book (which has XP) for regular MTTY or go trough the headache of installing drivers for Win7.
Also another advantage to even MTTY under XP (if I know this right) is that we don't have to enter commands in the consul (so again time and effort saved).
If I get this right, then with this we don't need unsigned driver install on Win 7. Just to re-flash a radio of our choice and task 29 is done too? If this is so, then its great. Radio flash is really fast.
If this does work well then I would definitely recommend a sticky.
Very nice !
Thanks a lot !
doloop said:
if someone could provide me with a blank, but valid nbh, then help me to repack all this stuff into a single exe, it should be a great step ahead.
Click to expand...
Click to collapse
You mean something like this?
Attached Task29 into a single exe.
Enjoy!
ShaDrac
doloop said:
if someone could provide me with a blank, but valid nbh, then help me to repack all this stuff into a single exe, it should be a great step ahead.
Click to expand...
Click to collapse
extract splash nb from official rom and repackage into nbh
i don't think you can make a totally blank nbh that would be accepted by the spl

Categories

Resources