So I bought a Typhoon a while ago and everything worked great. I upgraded to a new phone and put this one down for a while. I jumped the battery and charged it. Great.
At first when I turned the phone on, it was white. No button lights either. So I thought the unit was done. I had 2 other dead(507ed) Blackberries(revived one ) and left the win mo charge for a while on AC. Came back, turned it on, now it was white at first and then started displaying vertical bars of various colors, and static like an old tv, but with colors, almost mimicing the startup sequence. Still no buttons. After messing with it for a while, I plugged it into the USB for a final time and lo and behold, I got activesync to pick it up, explorer and everything. Alarm started freaking out and everything... with no buttons.
Next day, After messing with it some more, I got the buttons to work with no light, got the light after unlocking it(service and app) for some reason. The backlight timer for the display and buttons also now worked... but still either a white screen or garbled whatnot.
When I try to upgrade, I get version 1.1.0.0. I can get into the bootloader (camera, plug in USB). When the comp begins the upgrade, It shuts down the connection and the phone, restarts the phone and connection, and ends it with a 264 error (no connection).
Sorry for the long story, but I made so much progress, I wanna get it working again. Any ideas??
Related
Hello dear XDA-dev members;
I had a problem this morning with my Wizard. I have a G3 device which i had downgraded to Button ROM for unlocking etc. It was working really fine until this morning. Last night i have turned off the phone radio (wireless and bluetooth was not enabled)and the battery was charged almost at %60.
This morning i woke up, i saw that he was entered in USB recovery mode itself. (the screen with red, green, blue, with my IPL 1.0 / SPL 1.0) , i was terrified because nobody touched my phone. Then i have pushed over power button, it shut-down. I've just waited a few minutes then i've just pushed again over power button, it started with my windows mobile 5 splash screen and showing my ipl/spl. the screen is really bright at this moment but fades out, when he started to fade out, he just shut-down itself.
I've read and searched over the forum, and though that it was my battery which was dead. I've plugged it with wall charger and waited almost one hour, and the charger led was red. I've tried to turn on, he just came on and go over my Today screen! and the charger led turned to green. Almost 45 seconds later the phone turned off itself. I've tried to re-start but it's same. I'm getting windows splash screen, and the screen brightness starts to fade out and the phones shuts down.
I've tested my battery with a volt-meter, i'm getting 4.86 volts. i have also checked power pins inside the phone, i'm also getting power there (4.6 volts) when it's connected with wall-charger, so i think that it's fine.
I have tried to hard reset, pushing communication + voice command button + soft reset button, i had the black screen, he said that it was ok, but same here. I was running with Button rom as i said before. (1.05)
Please help.
if you still can get into bootloader, it should be fine
It was entered into bootloader mode itself. When i'm trying to start it, the splash screen comes on, it shows WM5 and my IPL/SPL and 20 seconds after, it shut down. I really need help because it's my only phone that i own.
etron45 said:
It was entered into bootloader mode itself. When i'm trying to start it, the splash screen comes on, it shows WM5 and my IPL/SPL and 20 seconds after, it shut down. I really need help because it's my only phone that i own.
Click to expand...
Click to collapse
Have you had your phone more than a year? It may be the battery.
Replacement batteries cost only $5 on ebay or Amazon. Just get a battery so you can be sure that isn't the problem. In any event, you will probably need a new battery so you may as well try this.
joihan777 said:
Have you had your phone more than a year? It may be the battery.
Replacement batteries cost only $5 on ebay or Amazon. Just get a battery so you can be sure that isn't the problem. In any event, you will probably need a new battery so you may as well try this.
Click to expand...
Click to collapse
I've gone to buy a new battery, but it's the same thing. It just shuts-down irregullary at splash screen, or today screen.
Some faults in memory result in the device needing to soft reset in an attempt to reclaim memory. Perhaps you could try flashing to another rom. I dont own a g3 so I cant really advise you any further.
Mine not exactly like you but automatic bootloader or stuck at IPL screen. It was out of nowhere but thought a bad flash. When trying the hard reset, it would come as "failed".
Nearly threw phone thinking too old and dead but this came to rescue. http://forum.xda-developers.com/showthread.php?t=276963. If not tried, give it a shot.
WARNING: Use card reader to save your MINISD data's and if successful, first format card before reinserting.
So i got this message yesterday that i installed some bad software, which i find kinda odd (battery was emptied aswell, so not sure what was up - 2 top lights blinked red 3 times when i pressed power), but that's a different story, so it said i had to do a hard reset, which i did, now i need to update to the latest official version, i used the update service before which worked fine, now however i can't get it done, my battery is full (it doesn't show it's charging anymore both on the screen and no lights go on), so it says it has to stay connected to the pc, turn off and remove the battery, put it back in and start it up with the volume and on button, however as soon as i put the battery in it will turn on itself, i've tried it like 10 times now and i'm getting pretty frustrated, especially because i can't use my phone properly at the moment.
Hi,
mi n2e only with 1 week and has got frozen in the middle of a book. It doesn't respond. Soft reset doesn't work. Battery was about 50%.
I have disassembled it and try a lot of things, remove battery, connect to supply without battery... but the screen is in the same page of the book. There is no way to turn off screen.
Now with the nook connected to supply the led indicator is off and my computer doesn't detect it. This morning I got the light turned red (charging perhaps???) In this situation when I pushed button to turn off, the red changed to green for 2-3 seconds and then turned red again. And my computer detected it.
But now the light indicator is off again.
This is a gift from a friend in Usa. I live in Spain, so there is no warranty and for this reason I've tried to repair myself.
Any help, please? I'm desperate with it. I can't understand it fails in only 1 week.
Thanks.
> Soft reset doesn't work.
What do you mean by "doesn't work". It happened to me that my touch screen stucked but when I pressed "power off" button for a long time (e.g. 15 s) my nook rebooted and then if was OK.
But in you case whole system is stucked (no menu after pressing "n"), right?
Right. Whole system is out. Anything works... Now when I plug to power, there is no light on (led is off).
Hi Esfinge
Did you find a solution?
Same thing happened to me, I'm in South Africa, so can't take it back to B&N.
Got it brand new, charged it, connected to wi-fi, registered, loaded a book via Caliber (on Mac), switched off wi-fi.
The next time I picked it up it had the message that the unit is switched off and that
you have to power it up by pressing the power button on the back.
Tried removing the battery, did not help at all, also holding power button for 20 sec.
If I plug it into power the light goes green and then orange after a couple of seconds, if I connect it to a computer I can access the files on the nook.
esfinge said:
I have disassembled it and try a lot of things, remove battery, connect to supply without battery... but the screen is in the same page of the book. There is no way to turn off screen.
Click to expand...
Click to collapse
Dude, it's a e-ink screen..
When powered down it still retains its last image, it wont go blank unless told to do so.
JDRZA said:
Hi Esfinge
If I plug it into power the light goes green and then orange after a couple of seconds, if I connect it to a computer I can access the files on the nook.
Click to expand...
Click to collapse
That doesn't make sense, a powered down N2 will not mount the sdcard on your pc when connected via usb.
So if you're able to access the Nook partition while the N2 is still showing its "powered down" screen, you're in some serious trouble, as that would indicate the N2 is powered on and running, but not communicating with the e-Ink screen
So if you're able to access the Nook partition while the N2 is still showing its "powered down" screen, you're in some serious trouble, as that would indicate the N2 is powered on and running, but not communicating with the e-Ink screen [/QUOTE]
This seems to be the case, worked perfectly and then suddenly not, I might be sitting with a 'Friday' model.... anyone know where I can get a new screen?
JDRZA said:
So if you're able to access the Nook partition while the N2 is still showing its "powered down" screen, you're in some serious trouble, as that would indicate the N2 is powered on and running, but not communicating with the e-Ink screen
Click to expand...
Click to collapse
This seems to be the case, worked perfectly and then suddenly not, I might be sitting with a 'Friday' model.... anyone know where I can get a new screen?[/QUOTE]
Screen is black blank, hasnt came back since it first shut off after the first or second reboot on the first try restoring it to 1.4.3. The Screen was working fine before I used it everyday then i wanted to switch roms from phirmod 7.1 to NookieJoyOS it worked but the wifey didnt like it. She wanted her original nook color back. So I went back to original stock rom and then i started having problems. At first i though i had formatted something wrong in cw3.0.2.8. Above I was stating scenarios in threads i was reading on what possibly happened.
dbole said:
This seems to be the case, worked perfectly and then suddenly not, I might be sitting with a 'Friday' model.... anyone know where I can get a new screen?
Click to expand...
Click to collapse
I recently got an NST screen/digitizer for ~$40US on eBay, it took 5minutes to replace it.
Hi everyone,
a friend of mine's Nexus 4 has this strange behavior.
It went into water for about 1 second: unfortunately, she was working far from home and needed to keep the phone on for working reasons, I know and told her that the best would have been to switch it off and put in a bag of rice.
In any case, after few minutes where she was not able to listen to the people speaking, and the same on the other side (she was not listened), she kept the phone in a pocket and under the sun, and suddenly everything went fine: probably some water in the audio jack made the phone think the earplugs were plugged, and then this was fixed.
In the rest of the day everything was working, and we thought that, thanks to the hot day and the phone under the sun, the humidity has dried up.
At night when she came back home, she switched the phone off and put in the rice for the night.
The day after, she tried to switch the phone on, and nothing happend.
Screen black, no signals.
After reading something on the internet, she plugged the charger, and kept power+volume down buttons pushed: after some time, the red light appears, just one fast blink and then dark again.
So, we ordered a replacement battery (I have already substituted a Nexus 4 battery of another friend of mine), which arrived yesterday. I proceeded with the substitution, everything went fine (and I noticed that the internal water detectors are still perfect white, only the one in the sim tray is pink), but when I plugged the usb charger, again nothing happened. This time, holding power+volume down made the red light appear and stay solid, no blinking, no disappearing, until I unplug the phone, at that moment it disappears.
I let her charge the phone for the whole night, but still the same issue this morning.
What can the problem be?
It sounds strange to me that at first the phone worked and then it stopped at the first switch off (and I think that she powered off and on the phone right after the incident, and was still working) :-\
And I'm not able to understand the red light behavior...can someone help please?
Many many thanks :-[
Tonight, my turbo 2 started acting up. I pulled it out to make a call, and the top 1/2 inch of my screen was flickering purple. That went away after about an hour, but then the whole screen went black and unresponsive. After trying to shut it off and reboot for a bit, it just randomly started working again. Full battery. Everything works, except the top 1/2 inch of display is completely black, every now and then, it will be green. If the phone sleeps, even for a second, it won't come back on, for about an hour, then it will randomly start working again. Never got wet, or dropped. Any body had an issue like this?
There's a known issue with a green line on the screen, I believe the speculation is a bad batch of screens got out, you're gonna have to exchange it for a new phone.
I am currently having this same issue. Going to VZ today to see about resolving it, as really hard to do anything when its doing that. Top 1/2 or more of the screen is flickering purple, then the screen will not let you turn up the brightness, all programing in the back works, just a LED issue. Restarted and same thing, let it charge Off all night, and back to normal after a few minutes using it. Very odd, not sure what is going on.
I have a similar issue, and I am trying to recover some data from mine. It seems booting into bootloader mode and using ADB yields nothing
I also cannot use MTP, as when I plug my phone in it's not in MTP mode for some reason, and i Can't see how to turn it on (screen is black). Digitizer still works. Does anyone have any suggestions? Can someone here maybe take a video of themselves plugging the phone in via USB and then selecting MTP on the phone? perhaps I can do it blindly...
Really don't want to give this phone back to vz until I get my data off of it.
About eight hours of pissing and moaning and I finally figured out:
Using the replacement phone, I just mimicked every movement on the one with the dead screen. I hit the "cast" button on the notifications panel and casted the screen to my chromecast, which in turn allowed me to set up MTP mode and/or anything else I wanted.
Cheers, hope this helps someone