Related
http://reviewstash.com/viewtopic.php?pid=3239#p3239
i'm trying to do this to my g1 but it's a little vauge for someone who has never attempted this. i.e: me ... couple of quick questions 1st:
-do i need to get a new sdcard to replace the stock 1?
-does the phone need to be in rc29 first?
step#5 at the bottom listed to wipe and flash the phone, so i looked up how to flash the g1 on this forum and it seemed to require going back to rc29, which i did.
only problem is, step#2 listed to extract step#1 in to the "ext2" partition, which no longer exists after i put my phone back to rc29.
i just installed jesusfreke's rc33 thinking maybe "ext2" was only on rc33 or something, and "ext2" still is not there. ANY help would be greatly appreciated. i used "SDSPLIT" to create a dual partitioned sdcard, & sdsplit says everything is partitioned and ready, only now when i mount it to my computer nothing shows up.
oh and i'm new, sorry if this has been posted...went through a ton of pages on this forum and didn't see any posts about it, might have overlooked it while scrolling through wall after wall after wall of posts
EDIT: i used to own an htc fuze and wizard, but this phone is a whole new ballgame for me!
Same here... do we need a replacement mircro sd card than the one given to us in the box?
Oh my goodness gracious, 1. Y would u follow a guide not in the forums [email protected] ur posting on? Have u even tried searching first? Why would you need to replace ur sd? It would be better to(not sure what class it is, but im sure its a 2), the phone needs to have root to install Hero, and the partitions on the SD card r not rom related
you can use any micro sd card.
use the search....
First you didn't read the very firs post on this forum.It should be deleted. Second flashing the hero rom in not for the average Joe. Third a little search goes a long way....i.e. there is a post on how to do it.
Delete this thread!
if you don't know what ext2 is you should forget about it since you didn't even bother reading the guides that are posted here...
Hmm sounds like a problem, what I recommend is that you go and call up TMobile and go ahead and pay another 400 dollars for another G1 and see what firmware it is, repeat as needed until you get one that has RC29 on it.
Alright, seriously, use the search button, and follow guides on THIS site if you plan on asking questions. You do not need a new SD card, however the stock card that comes with the G1 is a class 2 card, which is not sufficient for Apps2SD. Just type into the command prompt
adb push (location of app_s.zip) /system/sd/
adb shell
cd /system/sd/
unzip App_s.zip
You should be good now.
Also, do not mount the SD card. Just plug it in and do the ADB commands.
drmosh said:
if you don't know what ext2 is you should forget about it since you didn't even bother reading the guides that are posted here...
Click to expand...
Click to collapse
Probably the smartest new member ever, but yea OP jus 4get about trying to get the Hero Rom since u wanna rush into it w.o doin the research
Woooooooooooooooooooooooow. I thought i was a noob. An i figured out how to install Haykuro's HERO ROM. Delete or be deleted
Please Search first.
Please post in the right thread/forum.
Thank you.
LOL should've known even an all-nerd forum would have jackasses on it. Good thing you guys are so helpful, i might never have gotten my hero rom to work on my g1!
ps, works like a charm, thanks for the warm wishes broskis. go out and get a couple drinks once in a while and socialize. weirdos
I don't get when this forum became so hostile.
If more than 3 individual people took time out of their lives and told him that he's a noob, that is ridiculous. This forum used to help people out so much.
The g1 community is just some flamers.
Ok. So I fixed my phone thanks to you guys. But now, after I downloaded a few apps, nothing is Installing onto my phone. Does anybody have any idea what's wrong with my phone? And I have Cyanogen, if I updated it, will it fix it?
You are just full of questions, aren't you. Well of course they are not installing to your phone if you are using a ext partion and apps2sd, then they install on, say it with me.....your sd card.
Sorry I am a little sarcistic when I just wake up
gridlock32404 said:
You are just full of questions, aren't you. Well of course they are not installing to your phone if you are using a ext partion and apps2sd, then they install on, say it with me.....your sd card.
Sorry I am a little sarcistic when I just wake up
Click to expand...
Click to collapse
Hahaha... lol... I don't get it.
Can you explain? They were installing at first but now they won't.
I was being a smartass since you said........oh nevermind..... so when you say they don't install, give more info, is it.a problem parsing the package, are they downloading? If they are not d/l than log out of gtalk and sign back in, that seems to be the common answer for that or just reboot your phone
gridlock32404 said:
I was being a smartass since you said........oh nevermind..... so when you say they don't install, give more info, is it.a problem parsing the package, are they downloading? If they are not d/l than log out of gtalk and sign back in, that seems to be the common answer for that or just reboot your phone
Click to expand...
Click to collapse
Well, they Download, but they don't Install.
Hmmm...... what's it say after they download, does your phone say uninstall failed, or you just can't find them in your system? What exactly is it doing
gridlock32404 said:
Hmmm...... what's it say after they download, does your phone say uninstall failed, or you just can't find them in your system? What exactly is it doing
Click to expand...
Click to collapse
Your making me feel bad!! =( Lol. It just says Installation Unsuccessful.
Is it possible than your ext partion corrupted somehow, you could always try a wipe and a reflash of your rom or repartion your sd, honestly I never had this issue and hence not sure of a possible card and have not seen any posts of anyone else to give me any plausible ideas
LOL this thread is funny but anyway have you tried using cyanogen post about Market download freeze? I think that's what you are talking about
http://forum.xda-developers.com/showthread.php?t=539780
hope it helps!
I thought that was what he was talking about at first but after reading cyanogen thread, the problem in the thread is when the download is not downloading it just hangs when it goes to download unlike the op's problem where they are not installing
Sounds like a faulty sd card. Could need to be repartitioned or simply wipe your ext2/3, someone here give this kind man the commands to do so in recovery.
crpercodani said:
Sounds like a faulty sd card. Could need to be repartitioned or simply wipe your ext2/3, someone here give this kind man the commands to do so in recovery.
Click to expand...
Click to collapse
mke2fs -j /dev/block/mmcblk0p2
in the recovery console. quickest, easiest, most efficient way.
david1171 said:
mke2fs -j /dev/block/mmcblk0p2
in the recovery console. quickest, easiest, most efficient way.
Click to expand...
Click to collapse
Won't work.
What do you mean won't work? What happened when you typed it in? If you got a error then A) You mistyped or B) Your card wasn't properly partitioned before.
Honestly bud you seem to not totally grasp alot of this which is fine because it is alot to learn but you may need to just wipe your rom and format your card then repartition it double checking everything, and type print after you do the 2 partitions it will show you how many partitions you have.
Aren't these threads the greatest. Hey it won't work or what's wrong with my phone? People need to give the most details they can and what they have tried to do to resolve the issue.
supremeteam256 said:
Aren't these threads the greatest. Hey it won't work or what's wrong with my phone? People need to give the most details they can and what they have tried to do to resolve the issue.
Click to expand...
Click to collapse
"bad" "dead" common complaints I see on tags from customers YAY THEY ARE SOOOOO HELPFUL /wrist
crpercodani said:
Sounds like a faulty sd card. Could need to be repartitioned or simply wipe your ext2/3, someone here give this kind man the commands to do so in recovery.
Click to expand...
Click to collapse
I'm not a "man"... I'm a kid!
i downloaded it. installed it with astro. hit reboot. and now the phone wont go past
TMOBILE G1
please help me!!!
oh and im using the newest cyan
trexxcrap2 said:
i downloaded it. installed it with astro. hit reboot. and now the phone wont go past
TMOBILE G1
please help me!!!
oh and im using the newest cyan
Click to expand...
Click to collapse
You're not supposed to use any other apps2sd with cyanogenmod, it says that plainly in the instructions.
I think the easiest thing is to wipe and reflash.
AdamPI said:
You're not supposed to use any other apps2sd with cyanogenmod, it says that plainly in the instructions.
I think the easiest thing is to wipe and reflash.
Click to expand...
Click to collapse
i went to the menu that says restore to factory / wipe and its still not booting. what exactly do i need to do / download. thanks. (sorry for bein dumb)
You need to wipe your ext partition now. Search this forum for the instructions. Then you need to go back to the CyanogenMod thread and memorize all the warnings he has posted.
You better start reading carefully before you brick your phone. There are multiple warnings saying DO NOT USE ANY OTHER APPS2SD METHOD. Just about all roms now are auto when it comes to apps2sd.
i wiped the phone and took out the sd and it still doesnt boot. do i need to root agian? ughhhh
trexxcrap2 said:
i wiped the phone and took out the sd and it still doesnt boot. do i need to root agian? ughhhh
Click to expand...
Click to collapse
Just reflash your rom.
supremeteam256 said:
Just reflash your rom.
Click to expand...
Click to collapse
i searched for "wipe ext partition" and cant find anything. can you point me in the right direction?
and thank you guys so much
go into parted from the recovery console.
use "print" to show your partitions, write down the start and stop locations
use "rm 2" replacing my 2 with your ext partition number but most likely it's 2 anyways
then remake the partition using the start and stop locations from the "print" results.
type "quit" or "exit" (i forget which one.
now type "upgrade_fs"
now type reboot recovery and reflash the rom
mmmmmmmmm yummy, a big ol' bowel of booty loops, the prize in the box is an android
thanks guys! with your help she is up and running
but one more question. since i have the new cyan build and you guys say apps2sd is built in how do i activate it? i have an icon at the top saying memory is low.
last question i promise thank you!!!!
trexxcrap2 said:
thanks guys! with your help she is up and running
but one more question. since i have the new cyan build and you guys say apps2sd is built in how do i activate it? i have an icon at the top saying memory is low.
last question i promise thank you!!!!
Click to expand...
Click to collapse
All you need in order to get the apps to automatically be moved to the SD card, is to have an existing ext3 partition.
As someone said earlier, use Cyan's recovery (which hopefully you flashed to, right?) and use the Parted application to create an ext2 partition. You will then go back to the normal recovery console and run the script "upgrade_fs", which will upgrade the filesystem from ext2 to ext3.
First off,sorry if I'm posting this in the wrong spot.Now,I've just sucessfully rooted my Hero and flashed using the Fresh 1.1 ROM.Basically the main reason is to be able to install to the sdcard.I've tried just about everything I can think of to get this to work using what I've read on here among other resources online but am still coming up with the 'Ooops! Looks like you...' error,so I went to the thread shown on the error and attempted to do that.I've tried it having my sd partitioned in RA and without.I believe I'm doing the right steps but obviously not in the right order.I have the init.rc and a2sd.sh on the sd's root and have tried the commands using the terminal,everything looks good but when I go back into the app2sd I get the same error .I know I'm probably doing something stupid being this is the first time I've done this but its been bugging the hell out of me.so I just pretty much just need to know the order of things from after I flash the Rom to getting to the app to enter the partition size.also,the app itself,am I supposed to be installing it manually?, like I've been doing or is there something else because I've read on the Fresh 1.1 thread it comes with it and is supported.Any info that might help is greatly appreciated,thanks for your time.
casperlt1 said:
First off,sorry if I'm posting this in the wrong spot.Now,I've just sucessfully rooted my Hero and flashed using the Fresh 1.1 ROM.Basically the main reason is to be able to install to the sdcard.I've tried just about everything I can think of to get this to work using what I've read on here among other resources online but am still coming up with the 'Ooops! Looks like you...' error,so I went to the thread shown on the error and attempted to do that.I've tried it having my sd partitioned in RA and without.I believe I'm doing the right steps but obviously not in the right order.I have the init.rc and a2sd.sh on the sd's root and have tried the commands using the terminal,everything looks good but when I go back into the app2sd I get the same error .I know I'm probably doing something stupid being this is the first time I've done this but its been bugging the hell out of me.so I just pretty much just need to know the order of things from after I flash the Rom to getting to the app to enter the partition size.also,the app itself,am I supposed to be installing it manually?, like I've been doing or is there something else because I've read on the Fresh 1.1 thread it comes with it and is supported.Any info that might help is greatly appreciated,thanks for your time.
Click to expand...
Click to collapse
First - Someone is going to ding you on this post with a "Search First"
Second Fresh 1.1 does apps2sd auto-magically all you have to do is format the SD card with an ext partition in Recovery. No extra work required with the scripts. Yes your internal phone memory will still fluctuate.
i really confuse right now, i read all thread bout app2sd for 3 day, and i still can't get app2sd work on my xperia x8.
i rooted with superoneclick, installed xrecovery, done partitioning. can any dev or someone help me please.
im using eclair 2.1 on x8.
i tried app2sd with xrecovery many times.
where might i've gone wrong?
if possible, please post me a more noobish tutorial because, i having a really hard time installing these.
this is HOW-TO http://forum.xda-developers.com/showthread.php?p=8579902#post8579902
Tehouster said:
this is HOW-TO http://forum.xda-developers.com/showthread.php?p=8579902#post8579902
Click to expand...
Click to collapse
thanks!
worked for me!
when i enter cmd
type cd /adb
it says
the system cannot find the path specified
whats wrong then??
you must enter superoneclick folder to acces adb.exe.
ex : "c:\superoneclick\adb shell" will work.
i'm done installinng it, but when i search and install an app from the market, my internal memory decrease.
did i done anything wrong here?
i have attach a pic from dos.
ok, i'm waiting to see what happenes here....as we can't have the 2.2 update i need apps to sd.
Alot of this isn't making much sense to me, so can anyone help me decifer this lot
amirulsufrie said:
i really confuse right now, i read all thread bout app2sd for 3 day, and i still can't get app2sd work on my xperia x8.
i rooted with superoneclick, installed xrecovery, done partitioning. can any dev or someone help me please.
im using eclair 2.1 on x8.
i tried app2sd with xrecovery many times.
where might i've gone wrong?
if possible, please post me a more noobish tutorial because, i having a really hard time installing these.
Click to expand...
Click to collapse
try Link2sd works on x8 > click here
Its very easy to install and better than app2sd !
WORKS!!!! thanks guys~
you guys the BEST!!
but one more thing, when i install an app, it save 80% of memory to sd,
and 20% of it in internal memory...
^^^^^^^^^^^^^^^^^^^^
this is normal right?
Did you install the one that moves dalvik cache to card? I think it's pretty normal then. Mine is also like that.
i install it from this thread
http://forum.xda-developers.com/showthread.php?p=8579902#post8579902
but my internal memory decrease now...
i got 56Mb free space for internal storage..
So, you need to use that method with these files: http://forum.xda-developers.com/showthread.php?t=880387
Otherwise cache is created into phone.
this means i have to uninstall current app2sd using the 'cmd' then
install back with 'app2sd mod (dalvik cache to sd) zip' into the root of my sd card right?
I guess so. It's your call. Check also in Android Development threads. use search There were some similar problems.
Redpik said:
I guess so. It's your call. Check also in Android Development threads. use search There were some similar problems.
Click to expand...
Click to collapse
after i successfully instaled app2sd, which my internal memory is 156 mb after i reinstall all my apps, my x8 cannot connect wifi....
why this is happening???!