I have a huge problem: My Omnia Pro B7610 dont works anymore, when i boot it tells me i should get a new winmo version.
It seems to be expired.
I used Daskalos Lightweight rom, and now read that the version i had realy expired.
But seems i cant simply reflash it, because when i connect my phone to the pc now, nothing happens :'-(
Does the B7610 have any kind of download mode like the jet?
So i can boot up into this mode to reflash it?
If yes, what do i have to do? Or do you have any other ideas?
Help please :'-(
Phew, i was lucky.
Didnt know that it automaticaly switch to download mode when its turned off and octans detect it.
Reflashed it know, everything should work fine again ^^
Sorry for the false alarm, i was in panic...
Related
lastnight when i downgrade from WM5 to WM2003SE without having sd image, i used typhoontools to flash the bootloader from the french orange rom then reinstalled the lastest Qtek 8020 rom under bootloader mode. everything seem going well.......BUT when it get to 100%, the phone restart itself, and on windows saying something like "Successfully............you may now retart your smartphone....."
after the phone restarted it go straight to the bootloader mode (3 colors screen) and i try to hard reset........it dosen't work.....
then i try to flash the rom again........same thing happen
Could anyone have any idea??? plz help me..........otherwise.........my phone will never be able to use..
many thanks in advance
It happended when during copying rom from Pc to PDA and error at 3% everytime. What should I do
spl was unlocked (spl 1.11.0000)
Get the device into bootloader and flash the stock rom.
I had alomoust the same problem but i don`t know how i can get the device to bootloader mode to flash it. please help me
still can not correct the problems, any one can help me?
i try to flash original rom but it has the same error.
vladilol said:
I had alomoust the same problem but i don`t know how i can get the device to bootloader mode to flash it. please help me
Click to expand...
Click to collapse
First turn your PDA off.
Then keep the memo/voicerecorder button pressed while you turn on your PDA. It will automaticly go into bootloader mode. You can release the button then.
Please be advised that when you are using Windows Vista you will need different drivers then Microsoft offers you. You can find it further in this forum, aswell on this site:
http://http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
Don't forget to run USPL before flashing your rom.
btw, please disable hibernate and screensaver. When enabled it can fail your update.
Hope this will work. It did for me.
hi folks,
I am in real trouble. while trying to unlock i hard-resetted it, but now the phone is got stuck in tri-colour mode, I don't know what to do. Basically now it went like funny. it would not turn on, while u put it on to charge it will show the tri-colour and also if i leave it on charge it is getting hot. Do u guys recon any chip to be hitted?
if u need to know anything else pls let me know.
Regards
have you loaded a rom on to it?
hi there,
Not actually, basically one of my friend tried to unlock it in first place. I don't really know what he did with that. but the phone is totally dead now. If anyone can help me that will be highly appreciated because this phone is not mine, this is customer's.
If he tried to put rom on it what consequence would happen and is there any way to get out of there?
Regards
windows software gone
Hello there,
It's me again. I think on this the software is missing. Because if i connect it to the computer it brings on the tri-colour and shows usb connection. So, the software i think missing. If anyone can give me a link how to put the software in there i will appreciate that. But still i am not pretty sure why it is getting hot while charge and why it is not turning on even it charged.
thanx
NetrunnerAT said:
If you are stuck in the bootloader, download MTTY, connect via USB (Activ Sync must disabled via USB!!!) and type the Command "boot"
Click to expand...
Click to collapse
Try it ... search for Tri-Color or Bootloader Mode.
still no solution
No success mate. I have downloaded the mtty. and it says usb port cannot open. but if i go to com3 it allows me to write something over there. i write boot on it but nothing happening , and actually i don't know what would happen?
regards
Try it again ... again ... again ... you need to connect VIA USB!!!!!!!!
If he cant Open ... shut down your Activ Sync!
If you cant ... use a other PC. Vista have some bugs and Windows XP 64 too.
My phone was working well. Then i installed the new rom from mdj, CM7.
At first it was working good, but then i plugged my phone to pc but it wasnt recognized anymore. So i wanted to change back to another rom. No matter what i did my pc and my netbook didnt recognize my phone anymore. then i tried to update the rom with CW and a fixed rom from CM7. Since then my phone tells me theres nothing to boot in nand. And pc still not recognizing my phone. Pls help me guys. im trying to fix this since 3 hours but nothing works...pls help me.
power off your phone (pull battery and put it back in)
hold volume down and power button until you get to the tri colored screen
plug the usb into the computer
flash over any RUU
i tried that allready but as i said pc dont recognize as usb...so at the screen it says serial and not usb...but still i tried to install it and it didnt work
When i boot the phone it says...nand kernel open failed...is there a way to install a nand rom completely over CW?
Then is sounds like your pc has the prob not the phone.
Reboot PC and also try re-instaling Mobile Device Center or ActiveSync depending on what version of windows you have.
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
H-KaN said:
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
Click to expand...
Click to collapse
have you tried reflashing winmo using sd card? then start all over again.
H-KaN said:
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
Click to expand...
Click to collapse
Trying flashing your official WM Rom through SDcard. Once you are back in WM, you can flash your desire NAND Rom.
i took the ruu_signed.nbh from an official rom named it to leoimg.nbh and put it on my sd...started the phone with volume down and power...it is updating
radio-ok
rcust-ok
bootloader-ok
splash-ok
os-
configdata-
the first time the update didnt work and now its updating again and i hope it will finish and make it work again and not cancel again...
thank u for the advice...maybe it will work
H-KaN said:
i took the ruu_signed.nbh from an official rom named it to leoimg.nbh and put it on my sd...started the phone with volume down and power...it is updating
radio-ok
rcust-ok
bootloader-ok
splash-ok
os-
configdata-
the first time the update didnt work and now its updating again and i hope it will finish and make it work again and not cancel again...
thank u for the advice...maybe it will work
Click to expand...
Click to collapse
Hope everything goes well for you......Good Luck
yesssssssssssss phone starts again...winmo is installed! the only problem which left is that the pc dont recognize my phone...i reinstalled mobile device center...but it cant install the phone driver...what can be the problem? does anyone know a page where i can download just the driver and install it?
H-KaN said:
yesssssssssssss phone starts again...winmo is installed! the only problem which left is that the pc dont recognize my phone...i reinstalled mobile device center...but it cant install the phone driver...what can be the problem? does anyone know a page where i can download just the driver and install it?
Click to expand...
Click to collapse
better fully uninstall mobile device center using softs like your uninstaller and alike to totally clean the installation then plug in usb. Then let Windows 7 do its job in installing the driver.
i cant believe it :S for real i cant believe it...i just changed the usb cable and tried with it :S and it worked :S the driver got installed and now its working :S now thats curious...not working with original cable anymore but with a cable from the nokia n97 :S
Hey friend need help from you guys i have a Samsung focus which i got from my friend and this phone does boot its hangs at the Samsung boot screen. What i know about this phone its a refurb piece from at&t apart from that i don't know anything what OS version it was running.
So this is what i have tried so far.
I tried to hard reset the phone but when i tru to put it to the reset mode the second it goes to the mode it restarts and and comes back to the boot screen, but some how i managed to format it but to ass no luck with the formatting.
Tried the Download mode also and tried to flash the stock ROM from http://forum.xda-developers.com/showthread.php?t=1131022 but i got an error >
THIS NOT AN RETAILS DEVICE, How come it cannot be a retail device if it is not an retail device then do we have any other rom for this specific phone which is not an retail phone ?
I searched for this (NOT A RETAIL DEVICE) and was not able to find anything.
Any help from you guys will be really appreciated.
Thanks.
More info about the phone.
Samsung Focus
OS Version- No idea what it was running.
Build- 1012
REV 1.3
Try the Flasher from this post (4th link, WP7 Downloader 7.41).
Extract the UCJK2 rom and instead of WP7 Downloader 7.05 try that one.
If that fails you may have to flash a custom rom (see the post in my sig). Or wait for someone with a better solution.
Thanks for replying mate, Tried the stock rom with the downloader u have suggested but i get following errors.
Partition image is not equal do u erase and download all ?
If i press YES on that window i get this> SPH-I350 Downloader has stooped working and ask me to close the program ?
And if i press the NO the windows close and phone boots to Samsung boot screen from download mode.
To add to the above can i flash custom rom over this as the phone only goes to Download mode ?
rkkaranrk said:
To add to the above can i flash custom rom over this as the phone only goes to Download mode ?
Click to expand...
Click to collapse
You can try. However first things first.
Can you try using both flashers from the UCJK2 rom?
WP7 Downloader Ver 7.21 for All Device (Publish version).exe
WP7_Downloader_Ver_7.05_for_Retail_Device_(Product_Force_Select_MD5_X).exe
Normally you should be able to flash UCJK2.
EnderPsp said:
You can try. However first things first.
Can you try using both flashers from the UCJK2 rom?
WP7 Downloader Ver 7.21 for All Device (Publish version).exe
WP7_Downloader_Ver_7.05_for_Retail_Device_(Product_Force_Select_MD5_X).exe
Normally you should be able to flash UCJK2.
Click to expand...
Click to collapse
Tried the WP7 Downloader 7.21 and got this error
The device does not match with the selected binary, Downloader will not do anything.
With WP7 Downloader 7.05 i get this.
This device is not retails device, Downloader will not do anything.
If you can get into download mode then try installing MAGLDR, then once in MAGLDR install a custom ROM. It won't do any checks for RETAIL or otherwise and will just flash what you tell it to.
tried to install MAGLDR but but after the installation completed it said it will reboot to the mag mode but it dint and booted to the Samsung logo.
you have to press and hold vol-down + camera then power on the device. It should propmt you to format or press '<-' just press '<-' and then you will be in MAGLDR.
Yeah I was able to boot into MAG and the I tried to flash the clean rom 2.0 but it gave me an error- wring size block inside ......I have heard about bad blocks but what is this wrong size ?
To add to above phone goes to download mode easily but to get it to the format screen I have to try 100 time.
Sent from my GT-I9000 using Tapatalk 2
rkkaranrk said:
Yeah I was able to boot into MAG and the I tried to flash the clean rom 2.0 but it gave me an error- wring size block inside ......I have heard about bad blocks but what is this wrong size ?
To add to above phone goes to download mode easily but to get it to the format screen I have to try 100 time.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
It sounds like someone at some time tried to flash a Focus v1.4 ROM to your v1.3 phone. This is what happens when someone does that. There is no fix currently. Sorry.
Hmmmm........will there be any chance for the fix in future ? Or should I sell it as parts....
Sent from my GT-I9000 using Tapatalk 2
rkkaranrk said:
Hmmmm........will there be any chance for the fix in future ? Or should I sell it as parts....
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
It's an old device so there probably wont be too much in the way of new development/fixes, but no one can say for sure.
same here
I have the same problem too, my samsung focus stuck on samsung screen. Can you please provide some steps on how to flash it, and also can you please provide the links on where to download the tools needed to flash my phone.
Thank you so much.
I´m stuck in the same.
I buy this phone on ebay por pars.
on the back says REV 1.3 but when i try to restore in WP7 7.41 says WP7_PRODUCT_4K_DETECTED CC
if i try to restore with 1.3 says that is not correct.
Sometimes goes t recovery, something not.
magldr is installed, and when i try to install a rom for 1.3 says something that block number is incorrect.
any possible solution or is dead?
thanks!