OK, I received a T-Mobile hd2 that was and still is stuck on "stick together " screen. I tried the reset button on the back, taking out the battery, checked for bents battery pins, and I downloaded 2 "official" .exe roms and renamed to zip and extracted.the nbh file and renamed to leoimg.nbh and tried to flash them.via a formatted fat32 2gb SD card and only one worked, kind of but gets stuck at like 15% of the way?? For like 10 min..I just pulled the battery. .I tried it twice..Please help me out here..this is what is says on the bootloader screen if that helps??
PB81120. SS-B3
SPL-2.10.0000 8G XE
MICROP(LED) 0X05
MICROP(TOUCH) 0X50
AND NOW IT SAYS THIS (ON THE GREEN PART OF THE BOOTLOADER SCREEN), AND THIS IS AFTER THE FAILED FLASH THAT I TRIED..
"UPGRADE ROM CODE ERROR PLEASE TRY AGAIN" ?
Is that just saying that the flash failed?? Or something else??
Please help me out guys...as you can see I'm kinda desperate and exuasted in trying to get this.hd2 working again!! Preferably ANDROID FROYO..THANKS IN ADVANCE!!!
You need to make sure you are flashing the correct stock ROM. Try downloading and flashing the official T-Mobile US 2.13 ROM, that SHOULD get you back to working. Everything you are doing is correct, Fat32 formatted SD card, under 4GB....nice job searching before posting, that is to be commended. Anyways, try the 2.13 ROM and let me know what happens.
Have you tried a hard reset? Or task 29 while in bootloader mode?
Sent from my T-Mobile G2 using XDA App
Ok i tried the 2.13 rom and it flashed and said success! but then it just stayed at that screen?? so i pressed the reset button on the back and now its back to the stuck "stick together" screen!! ??? should i have waited till it rebooted after it said "succes "?? i waited like 5 min and nothing and i just pressed the reset button..or should i have taken out the battery??
Yeahhh...you may have jumped the gun a little bit...after is says success, it takes like 10 more minutes for the ROM to set everything up. Go into bootloader and try flashing it again with the stock ROM and wait for at least 10 minutes and see what happens.
OK ill try that if I get lucky enough for that successful update..LOL
But I flashed a hspl2 (2.08) and can't I just flash away?? (USB..bootloader mode) ?? Since the phone is always stuck on the bootloader screen..
I just open the exe flash program and connect my hd2 in bootloader mode and I get the USB mode on the bootloader screen and I flash away..but it but it always stops at a certain point...mostly 8%..???
Yeah you can just flash away like usual. HardSPL isn't required to flash an official ROM anyways.
what am i doing wrong!!?? i tried ,many roms but hang at 8% 95% of the time?? i tried kumars tmous v2.9 s23139 se rom, the ruu_leo_1_5_tmous_2.10.531.0_radio_15.34.50.07u, and T-Mobile_HD2_MR_Software_2.13.531.1, all stop at 8%???!! ...i always do task29 after every failed rom to be clean and start over..thats right..right??
i have the hspl 2.08
i have a feeling im flashing an incompatible rom that requires a different radio rom??
please give me a link to download the right rom...thanks
1st post, rom 2.13
http://forum.xda-developers.com/showthread.php?t=655653
i feel for ya man, i keep getting up and running , every thing runs fine, i get it to survive a few reboots, then dead.... stuck at the boot screen.
i cant wait for a solution to android running natively...
I tried but hangs at 8%????
i tried many other roms, kumar, core cell, official tmobile us roms, they all either stop at 0%, 1%, 8%????? im going crazy here!!! whats going on?? i have hspl 2.08 and i do a task29 before every flash, but the wierd thing is that it doesnt auto reboot after task29?? it should, right?? and even after a hspl3 flash it doesnt reboot, the phone use to reboot automatically after one of those??? no i have to take out the battery for 15 seconds and put it back for it to boot again into bootloader?? and wierd thing is that sometimes if a flash fails and when i get it the hd2 to turn back on and if i do the hard ereset (volume up and down and then press up to reformat) it then reboots and hangs at the boot image of the last failed flash?? i thought when i do a task29 everthing should be erased???
guys im about to LOOSE IT!! i have tried to flash this phone already like 100 times int he past 3 days, no joke!!! 2 times it reached 100% but even after it rebooted and i did a hard reset it would hang at the boot logo?????
please guys help me out!!! and im the type of guys thats not gonna stop unless it breaks or someone takes the phone away from me...lol
naiefelyemeni said:
i tried many other roms, kumar, core cell, official tmobile us roms, they all either stop at 0%, 1%, 8%????? im going crazy here!!! whats going on?? i have hspl 2.08 and i do a task29 before every flash, but the wierd thing is that it doesnt auto reboot after task29?? it should, right?? and even after a hspl3 flash it doesnt reboot, the phone use to reboot automatically after one of those??? no i have to take out the battery for 15 seconds and put it back for it to boot again into bootloader?? and wierd thing is that sometimes if a flash fails and when i get it the hd2 to turn back on and if i do the hard ereset (volume up and down and then press up to reformat) it then reboots and hangs at the boot image of the last failed flash?? i thought when i do a task29 everthing should be erased???
guys im about to LOOSE IT!! i have tried to flash this phone already like 100 times int he past 3 days, no joke!!! 2 times it reached 100% but even after it rebooted and i did a hard reset it would hang at the boot logo?????
please guys help me out!!! and im the type of guys thats not gonna stop unless it breaks or someone takes the phone away from me...lol
Click to expand...
Click to collapse
Did you have Android loaded on that same microSD card? Does it hang if your microSD card is out.
After you task 29 it should auto reboot, then you press Volume Down and Power to get into bootloader. Have you tried flashing from your PC via USB? If you are flashing form the card a stock rom, it will overwrite your HSPL to Stock SPL. You probably know this. Also if you flashed 2.13 then you need to install HSPL3 and not the original HSPL program. 2.13 has 2.10 firmware. HSPL only supports 2.8 firmware.
I've always heard when it hangs on boot up that it's usually something on your card.
it never had android, i got it with the stock firmware and it was messed up, stuck on "stick together" screen..and i never have the sd while im flashing via usb in bootloader.. i tried many roms, and task29 followed by hpsl3 and then i would flash custom roms and even stock roms but all fail?? all stop at like 8%, but the wierd thing is that even the task29 sometimes fails at 0% so im suspecting maybe its from windows 7? but i did try xp and the samething, the roms would stop usually at 8% or 0%??? ...weird?
ok i kinda fell like my mind is cluttered and confused..
i want to know, please..what rom is compatible with my current tomobile hd2 with hspl 2.08 colutta
so what rom should work fine?? with no problem?? and DOES IT MATTER WHAT MY RADIO ROM IS?? i have a feeling that if i have a older radio that it will interfere with the rom???
Ok i got it to accept a rom flash from sd card!! But it just stayed at the "update complete, update success" white screen??? I waited over 10min the i did a reset and hard reset...and now stuck at the boot logo??? I heard i might need a higher radio??? 2.10 or higher?? Is this why its not booting up?? Can i flash the radio through sd card??
naiefelyemeni said:
Ok i got it to accept a rom flash from sd card!! But it just stayed at the "update complete, update success" white screen??? I waited over 10min the i did a reset and hard reset...and now stuck at the boot logo??? I heard i might need a higher radio??? 2.10 or higher?? Is this why its not booting up?? Can i flash the radio through sd card??
Click to expand...
Click to collapse
You can flash a radio, just like a rom form the microSD card...
is there such a thing as a wrong radio version for a rom or "required" radio version for a rom?? will that cause the phone not to boot up???
naiefelyemeni said:
is there such a thing as a wrong radio version for a rom or "required" radio version for a rom?? will that cause the phone not to boot up???
Click to expand...
Click to collapse
I've never had issues using any Radio with any ROM really. Some combos work better than others but won't cause your problem. If I were you I would task29, then flash the 2.13 or the new 3.14 shipped ROM via microSD to take the SPL back to stock. Then I would flash HSPL3, then reflash a Custom ROM or the Stock ROM via USB. Then do a couple hard resets after that. If that doesn't work I'm thinking Hardware.
You can use any of these radios. http://www.4shared.com/dir/RFg27UmU/Radios.html Doesn't matter what ROM you are running.
Wtf!! I tried to restore the stock tmous roms (2.13 and the latest 3.14) and all would stop at 8%???? And i reverted back to stock 2.08 spl..still hangs at 8%??? But if i flash that core cell rom...itll say success 100%..??/ why???? Man this freakin hd2 is makin me go crazy...hardware issue maybe??
come on guys?? please help, its been like 10 days no reply...
I really hope I am not going to be flamed to death with my question as I have search everywhere for an answer.
This is the 1st time I have tried updating my phone to an Android ROM but I have run into a bit of a problem. I have updated the SPL on my phone to 2.08 HSPL.1
I am trying to load the Radio 2.15.50.14 but it is constantly getting stuck at 8%, I have tried running it several times now to no evail.
When I try and boot my phone it hangs on the HTC logo page, which I have read is resolved by updating the radio, but the radio will not update.
Can anybody please help me out with this as I am pulling my hair out and have spent days trying to resolve it.
Cheers
scouseman
I have managed to rescue my phone by installing the latest Stock ROM from the HTC site, I have now reinstalled HardSPL and tried to reinstall radio 2.14.50.14 but on flashing this radio the phone hangs and I am back to sqaure-one. Does anybody have any idea why I cannot install the radio even though 2.08 Hspl in installed?
Cheers
scouseman
hi i had a htc hd2 with 3.14 rom and i downgraded to 1.66 (if thats how to say it) and now it wont turn on at all whats the problem can anyon help? what should i do? is it bricked?
any help would be appriciated
take the battery out, wait 5 mintes then put the battery back in and try starting the phone
ellokito11 said:
hi i had a htc hd2 with 3.14 rom and i downgraded to 1.66 (if thats how to say it) and now it wont turn on at all whats the problem can anyon help? what should i do? is it bricked?
any help would be appriciated
Click to expand...
Click to collapse
What phone do you have? TMOUS? What ROM did you flash (Full file name)?
Try this:
Turn off the phone, Hold Volume -, Press & Release power button. If you get the tri-colour screen, it's all good, find a compatible ROM and re-flash from there.
Another reason to read as much as you can about radio, roms and how to flash. Before to start flashing.
Sent from my HTC HD2 using XDA App
mattog yes i have tmous, and thanks for the answer but it wont turn on at all, i have followed every step and nothing.
but i followed a video and it said i needed HSPL3 ~ SPL-2.08.HSPL but then it said in order to have that i needed to downgrade if i had 3.14 rom (which i did) to 1.66. i got the one it gave me there on the video.
also if this helps, when i did this my battery was exactly 50% and charging, and now the back on the phone doesnt get hot when its pluged in, so maybe i killed the battery?
Hi there everyone!
I installed a NAND Android Rom Dl Desire Z or something... everything was working, but suddendly phone just crashes, and nothing but a white screen appear as soon as HD2 powers on.
The only thing i'm able to do is to go to 3 color mode (hardspl) - but all attempts to flash a wm6.5 rom failed because customruu failed in the middle of the process. freezes at 0% and then appears a communication error in the application.
Conclusion: as soon as phone turns on, only a white screen appears, with nothing written in it.
i've searched for 2 hours in xda and google, nothing similar came...
i've reflashed hardspl3 - sucessfull, but nothing changed, white screen still appears.
i've tried to flash other roms but always freezes at 0%, and appears communication error in customruu application.
I don't know what to do :/
Is there anyone who can help me?
Thank you very much!!
If you can still get into bootloader and you do have hspl installed, try flashing the winmo rom via sd card.
Will do!
I'll post feedback
Start flashing official 1.66(its EU, you need analog to 1024 LEO) WM 6.5 rom from HSPL, than HPSL3, radio with 576 RAM(Radio_2.15.50.14 for example), than MAGLDR112, and after these steps flash Android
Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!
Hello
Im thinking maybe your motherboard as many tmous users ?.. just thinking..maybe?? I don't hope it for you
Sent from my HTC HD2 using XDA App
It doesn't make sense :S
I never had any problem with it, and it was running a new Android rom for the second time.. then I take the phone out of the pocket and it is with a white screen...
I can get to the hspl boot but it isn't proving useful...
Any thoughts?
My friends, please help me out
I am using t mobile HD2.
I've tried to rom up so many times, but it always stops immediately when it starts !
I use spl or hspl, when I start rom up, the sync with my laptop is disconnected immediately automatically.
Phone display, it shows nothing, just black screen,
on laptop it stops at 0%
allI can do is.. take battery off...
can you please help me?
is it my computer problem???
what's the reason???
TT TT
Flash hspl. Before you say "I have", go into bootloader, what does spl say? If it says 2.08.0000 then shame on you for making the most documented noob mistake there is.
Hi thanks !
my spl is 2.10.0000 ...
so.. wat should I do now?? I am dying... hehe
ok, so you havent used hspl yet at all.
get hspl3, run it, choose 2.08.hspl (NOT 2.08.0000) and when its done, you have hspl.
Typical, hasnt even bothered to read a bloody thing.
Hi !!hehe
I just followed yoru comment then..!
it works perfectly !!! very thank you !
I am already on wp7 hehe
have a nice day /!