Related
This post is obsolete
Thank you very much for this!
EDIT:
Only these two folders? No more or do I have to replce the folders inside of my Kitchen?
I took the liberty to changing the Title to Internet Explorer and Giving you Bump in informing you.
Hope people get the intention of this thread, so hopefully there won't be hundred's of different IE versions around.
Have you Seen PIE8 yet?
HI!!!
I am looking forward the PIE6 such a long time!!!
Thank you very much!!
But I want to know " Can it be uninstall to roll back to PIE4???"
Thanks!!!
Noonski said:
I took the liberty to changing the Title to Internet Explorer and Giving you Bump in informing you.
Hope people get the intention of this thread, so hopefully there won't be hundred's of different IE versions around.
Have you Seen PIE8 yet?
Click to expand...
Click to collapse
Hi Noonski, yes I already have Internet Explorer version 8 for a few days. Not tested yet. I uploaded it to mediafire so you can download the cab here. I didn't make an OEM package yet.
animelover said:
Only these two folders? No more or do I have to replce the folders inside of my Kitchen?
Click to expand...
Click to collapse
I would like to know as well what SYS packages (if any?) should be removed before putting this in the kitchen?
Andy
i installed mi ie8 cab on my hp ipaq 214. but i dont know how to start it. where is exe?
so I tried instaling the cab file and I do not see any differences. It seems like an addon for the already existing PIE... ?
I looke at the OEM, and I am not sure what the differences are other than the new DLLs.
Can someone explain what the new features are?
I still can't see the myspace page normal. WTF?!
Ok guy more details...
The oem package must go in Sys folder togehter other Browsing folders, you must not delete anything!
Cook your room and enjoy, rember tu put flashlite also in your rom!
For IE8 probably need some other file, I'll try to cook in a rom to try it!
robertus3d said:
Ok guy more details...
The oem package must go in Sys folder togehter other Browsing folders, you must not delete anything!
Cook your room and enjoy, rember tu put flashlite also in your rom!
For IE8 probably need some other file, I'll try to cook in a rom to try it!
Click to expand...
Click to collapse
That explains it. I was going to report back as not working but i might try that and check back later.
I tried the Package both in OEM and Sys, iT did not change anything here to.
More Play tomorrow.
**** Just Noticed this was Post Number 3000 for me.
Noonski said:
I tried the Package both in OEM and Sys, iT did not change anything here to.
More Play tomorrow.
**** Just Noticed this was Post Number 3000 for me.
Click to expand...
Click to collapse
Congrats on that.
Did you try the first root folder and put the two inner folders in the sys?
Repack posted in post #1, this should work.
I have cooked this into my ROM and it all works OK apart from the IE home page. In the folder 'browsingie_LANG_0409' the .RGU file sets the home page to
Code:
"home_0409"="file://\\Windows\\iemo6_default_0409.htm"
and this file is included in the folder. When I launch IE though I get the 'Action canceled' page. I have verified the file is there and if I use File Exlporer to find the file and then open it, it all opens OK. If I open the file this way and then set it to the home page and then close and open IE the problem is still there so I am stuck as to what the issue is?
I have noticed similar behaviour with other .htm files as well; for example the JBlend0409.htm file when trying to access it via Help - you get 'Cannot open Help. The file cannot be found' however the file is there and the shortcuts are correct?
It is pretty weird?
Andy
Hi Guys
I am using a HTC hermes. I just upgraded my device with wm6. I used offficial upgarde from AT&T. After upgrading the internet explorer is not working. Need help to solve the problem. With thanks
Pump Man
Hi,
i downloaded the Pack linked here:
http://forum.xda-developers.com/showthread.php?p=2870848
But this one is not installable on my Polaris. It says "Installation not successful".
I also downloaded M-Amines Opal Phone, but this one is also not installable correctly and it does not have this slider, that protects the buttons, that i can not click "end call" with my face
Does anyone have a Cab with the slider as shown on the pics in the link above?
I have M-Amine's 2.0 (GER) installed
Thanks...
Baxter. said:
Hi,
i downloaded the Pack linked here:
http://forum.xda-developers.com/showthread.php?p=2870848
But this one is not installable on my Polaris. It says "Installation not successful".
I also downloaded M-Amines Opal Phone, but this one is also not installable correctly and it does not have this slider, that protects the buttons, that i can not click "end call" with my face
Does anyone have a Cab with the slider as shown on the pics in the link above?
I have M-Amine's 2.0 (GER) installed
Thanks...
Click to expand...
Click to collapse
I don't remember where I got this cab from and I'm not sure whether it has the slider to answer etc. You might want to check the name/size just to make sure it isn't one you already tried. Hope it helps.
Thanks, it is the right one.
BUT: It looks weird
The Slider is not transparent and the Red Button which ends the call is only red and does not show any font.
Do you know why and how to fix it? Maybe I'm doing something wrong
Baxter. said:
Thanks, it is the right one.
BUT: It looks weird
The Slider is not transparent and the Red Button which ends the call is only red and does not show any font.
Do you know why and how to fix it? Maybe I'm doing something wrong
Click to expand...
Click to collapse
Maybe just make sure you have any other dialer uninstalled before you install this one?
Baxter. said:
The Slider is not transparent
Click to expand...
Click to collapse
This is what the Opal phone canvas looks like.
There is no transparent slider.
Sascha
Read this in another thread but can't remember where it was: Maybe try this and then attempt to reinstall the cab file. Hope this helps.
Delete reg keys under HKEY_LOCAL_MACHINE\Software\HTC\PhoneCanvas & set HKEY_LOCAL_MACHINE\Security\Phone\Skin\Enabled=0, it should then return to the default windows mobile dialer.
SaBo said:
This is what the Opal phone canvas looks like.
There is no transparent slider.
Sascha
Click to expand...
Click to collapse
Look at the Pics in this Thread:
http://forum.xda-developers.com/showthread.php?t=470510
The Phone is black-skinned and has a transparent slider. I need this, cause it looks really great
But the author only posted the raw files. Does anybody has this as a cab? I'm not a pro, i don't know how to make a cab out of the files
Baxter. said:
Look at the Pics in this Thread:
http://forum.xda-developers.com/showthread.php?t=470510
The Phone is black-skinned and has a transparent slider. I need this, cause it looks really great
But the author only posted the raw files. Does anybody has this as a cab? I'm not a pro, i don't know how to make a cab out of the files
Click to expand...
Click to collapse
OK, i got it.
It's the cab posted here and the skin posted in this thread
http://forum.xda-developers.com/showthread.php?t=470510
you just have to copy the new skin-Files to windows-directory with total commander
Thanks all
Look's good, i'm going to try it myself.
Thanks a lot!
I got it via mbarvian's upload. Just great to have it on TyTn II. Hope someone comes with a black colour.
Baxter. said:
the Red Button which ends the call is only red and does not show any font.
Click to expand...
Click to collapse
How did you solve this problem? I have it too (with M-Anime 2.0 [ITA])
mang1 said:
How did you solve this problem? I have it too (with M-Anime 2.0 [ITA])
Click to expand...
Click to collapse
You need the right language files for your ROM.
I installed mbarvian's CAB from here, and it has 3 language file:
phcanrc.dll.0409.mui
ContactAssistDll.dll.0409.mui
PhoneSettingExt.dll.0409.mui
Since I use your same ROM (M-Amine 2.0 [ITA]) I needed .410.mui files and managed to extract these
phcanrc.dll.0410.mui
PhoneSettingExt.dll.0410.mui
from AZTOR Diamond's ROM, and just copied ContactAssistDll.dll.0409.mui to ContactAssistDll.dll.0410.mui.
I am attaching these files, just unzip in \windows and reboot.
Met
P.S.
I also had to install jadeStatusIcons.cab to fix the "battery shows as always full" problem.
met67 said:
You need the right language files for your ROM.
I am attaching these files, just unzip in \windows and reboot.
Met
Click to expand...
Click to collapse
Thank you so much, my friend!
met67 said:
You need the right language files for your ROM.
I installed mbarvian's CAB from here, and it has 3 language file:
phcanrc.dll.0409.mui
ContactAssistDll.dll.0409.mui
PhoneSettingExt.dll.0409.mui
Since I use your same ROM (M-Amine 2.0 [ITA]) I needed .410.mui files and managed to extract these
phcanrc.dll.0410.mui
PhoneSettingExt.dll.0410.mui
from AZTOR Diamond's ROM, and just copied ContactAssistDll.dll.0409.mui to ContactAssistDll.dll.0410.mui.
I am attaching these files, just unzip in \windows and reboot.
Met
P.S.
I also had to install jadeStatusIcons.cab to fix the "battery shows as always full" problem.
Click to expand...
Click to collapse
Is it possible for you to upload the german files also? Would be great. Thanks
Baxter. said:
Is it possible for you to upload the german files also? Would be great. Thanks
Click to expand...
Click to collapse
Here you go...
I haven't tested these files, but they should work.
In order to extract more languages, just download the ROM in your language from AZTOR thread, extract DIAMIMG.nbh from the archive and issue these commands (you can find the executable here in XDA, just download a recent kitchen...):
NBHextract.exe DIAMIMG.nbh
ren *_OS.nb OS.nb
NBSplit.exe -kaiser OS.nb
ImgfsFromNb.exe OS.nb.payload imgfs.bin
ImgfsToDump.exe imgfs.bin
If everything is fine, you will find a "dump" folder which contains every file in the ROM, just open it and search for the MUIs in your language.
met67 said:
Here you go...
I haven't tested these files, but they should work.
In order to extract more languages, just download the ROM in your language from AZTOR thread, extract DIAMIMG.nbh from the archive and issue these commands (you can find the executable here in XDA, just download a recent kitchen...):
NBHextract.exe DIAMIMG.nbh
ren *_OS.nb OS.nb
NBSplit.exe -kaiser OS.nb
ImgfsFromNb.exe OS.nb.payload imgfs.bin
ImgfsToDump.exe imgfs.bin
If everything is fine, you will find a "dump" folder which contains every file in the ROM, just open it and search for the MUIs in your language.
Click to expand...
Click to collapse
thanks man
cr1960 said:
I don't remember where I got this cab from and I'm not sure whether it has the slider to answer etc. You might want to check the name/size just to make sure it isn't one you already tried. Hope it helps.
Click to expand...
Click to collapse
Thanks to all,
I was looking to change my dailer, and the opal one is exactly what I was looking for.
I then install the cab with the one correcting the battery status (works fine)
BUT SINCE MY PHONE IS NO LONGER RINGING NOR VIBRATING WHEN INCOMING CALL !!
I checked the register HKCU/ControlPanel/Sounds/RingTone0 Script String=av0pw3r on the default Windows Mobile ring tone
Any idea?
Many many BIG Thanks in advance !!
Hi all
I reply to myself: I got the solution:
For whatever reason the Category key in HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0 was corrupted: after Ring, some gabrage appear poluting the key.
I just earased it and leaving only Ring and now my phone is ringing and vibrating again.
Good night
Cannot install it on 3LIT3 II ROM Naked... Instalation unsuccesfull
michelD said:
Hi all
I reply to myself: I got the solution:
For whatever reason the Category key in HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0 was corrupted: after Ring, some gabrage appear poluting the key.
I just earased it and leaving only Ring and now my phone is ringing and vibrating again.
Good night
Click to expand...
Click to collapse
Thanks, i got the same problem, but didn't find a fix for it
Nice to know how to fix it
I recently put the stock TMOUS ROM on my Tilt2 and realized that T-mobile had taken "audio booster" out of the ROM. I found the HTC Diamond Audio booster on this forum but it is not compatible with WVGA. Does anybody have a WVGA compatible version of Audio booster? I'd greatly appreciate it.
HTC Audio Booster
Anybody???? Please.
Audio Booster
Any Cooks here that can make Audio booster 2.2 available? This is the version that is compatible with WVGA/Rhodium. Please. Bitte. Por Favor. S'il vous plait.
Still looking for Audio booster compatible with WVGA. I keep searching various sites with no luck.
+1 been looking for thing for at least two days straight...i finally just gave up
AudioBooster WVGA
Would someone be so kind and copy the following files from their windows directory and make them available to us?
AudioBoost.htm
AudioBooster.exe
AudioBooster.exe.0409.mui
ses_bg.bmp
ses_bg_w.bmp
ses_btn_eq_chked.bmp
ses_btn_eq_unchked.bmp
ses_btn_retry_down.bmp
ses_btn_retry_nor.bmp
ses_btn_retry_sel.bmp
ses_eq_preset.xml
ses_eq_title.xml
ses_headset_warning_bg_l.bmp
ses_headset_warning_bg_p.bmp
ses_msgbox.xml
ses_skin.xml
ses_slr_bar_2.bmp
ses_slr_bar_2f.bmp
ses_slr_bar_2l.bmp
ses_slr_bar_2lf.bmp
ses_slr_thumb_2.bmp
ses_slr_thumb_2f.bmp
AudioBooster WVGA
Ok. Here are the files. Extract and put in windows folder on your device.
AudioBooster WVGA
Here is the proper Reg file for Audiobooster. The one in the zip file above will not work.
I always wondered what's the purpose of Audio Booster. From the description i read, it seems to boost audio only when recording. Not during normal phone calls or playing music etc. Am i right or I am misinformed?
mikron15 said:
I always wondered what's the purpose of Audio Booster. From the description i read, it seems to boost audio only when recording. Not during normal phone calls or playing music etc. Am i right or I am misinformed?
Click to expand...
Click to collapse
It is an equalizer to be used when playing Audio.
Is this for 6.1 or 6.5
jmmmmm said:
Is this for 6.1 or 6.5
Click to expand...
Click to collapse
Works fine on both
It would not run on my Tmo Win 6.1. The executable did nothing when I tried to run it.
jmmmmm said:
It would not run on my Tmo Win 6.1. The executable did nothing when I tried to run it.
Click to expand...
Click to collapse
Install this cab first, then copy the files I posted to /Windows overwriting the existing files. Also import the reg file I posted. If the cab file does not install, then you need to manually delete all the Audio booster files (all 22 of them) in /windows first.
CAB?
is there any chance you have winCE Cab Manager and you can edit the diamond cab? I dont have my laptop with me so I cant build a cab out of your post..
The main issue is that in case someone makes a mistake, they cant uninstall or revert what they have done without a hard reset. (makes testing impossible for me)
thanks for the work youve done on this... If you havent compiled a cab in a week Ill do it once I get home.
S.V.I said:
is there any chance you have winCE Cab Manager and you can edit the diamond cab? I dont have my laptop with me so I cant build a cab out of your post..
The main issue is that in case someone makes a mistake, they cant uninstall or revert what they have done without a hard reset. (makes testing impossible for me)
thanks for the work youve done on this... If you havent compiled a cab in a week Ill do it once I get home.
Click to expand...
Click to collapse
Ok. I am running into some problems creating the cab with WinCeCab manager. I added the regular files to be installed into windows. How do I add the xml files? There are 2 option to add either a pre or post-provisional xml file, but when I try to add them I get an error message.
GermanGuy said:
Here is the proper Reg file for Audiobooster. The one in the zip file above will not work.
Click to expand...
Click to collapse
How and where do I move this Reg file into the registry? Thanks
Cab
Ok. I made a proper cab file.
GermanGuy said:
Ok. I am running into some problems creating the cab with WinCeCab manager. I added the regular files to be installed into windows. How do I add the xml files? There are 2 option to add either a pre or post-provisional xml file, but when I try to add them I get an error message.
Click to expand...
Click to collapse
with WINCE cab manager you dont need xml files. you just add the files and shortcuts and then the reg entries. same as cooking an extended package. the trick to modifying a cab though, is that you add the new files overwriting the old.
Thanks for the cab I will try it right now.
EDIT: is there a way to add a shorcut for the context menu in the audio manager tab? or should I have installed it with manila disabled?
S.V.I said:
EDIT: is there a way to add a shorcut for the context menu in the audio manager tab? or should I have installed it with manila disabled?
Click to expand...
Click to collapse
Not sure about this.
how do i install files in a folder and out of the folder is registry file?
when i down load a file. some of them come not as a cab file but it comes it contains a folder and a registry file out of the folder. i believe folder contains program file. where do i put which and where? can u help.
tazwik said:
how do i install files in a folder and out of the folder is registry file?
when i down load a file. some of them come not as a cab file but it comes it contains a folder and a registry file out of the folder. i believe folder contains program file. where do i put which and where? can u help.
Click to expand...
Click to collapse
What are you trying to install?...and where? I am sorry if I am miss understanding you but it sounds like you have a file with a reg file and another folder named files? is this right?
something like that. when i down load a file its not a cab file.it is a zip file. when i unzip. it has a folder with program with some files in the folder, but out of the folder or root directory there is 2to 3 files look like reg file. i do not know where to place these file.
tazwik said:
something like that. when i down load a file its not a cab file.it is a zip file. when i unzip. it has a folder with program with some files in the folder, but out of the folder or root directory there is 2to 3 files look like reg file. i do not know where to place these file.
Click to expand...
Click to collapse
Could you link me to the file so I can see it?
im tryin to install it in to my htc hd2 phone. its a program i downloaded. from xda. like camara hack. ther is a folder and files on the root directory. in the folder though there is a camara icon or program.
tazwik said:
im tryin to install it in to my htc hd2 phone. its a program i downloaded. from xda. like camara hack. ther is a folder and files on the root directory. in the folder though there is a camara icon or program.
Click to expand...
Click to collapse
Post the file or link me to where you got it please. I want to make sure I give you good info so it works.
sounds like a cracked app, where you get the prog folder and a reg file to crack it.
samsamuel said:
sounds like a cracked app, where you get the prog folder and a reg file to crack it.
Click to expand...
Click to collapse
I thought so as well till he\she said they got it on xda, that made me think maybe a kitchen ext package
The cab files can be opened with winzip on your PC. The contents of a cab file is usually an xml file, icon file and other files for installation. Are you sure you are not opening a cab file in winzip?
zelendel said:
I thought so as well till he\she said they got it on xda, that made me think maybe a kitchen ext package
Click to expand...
Click to collapse
ahh yea.that makes sense.
ok for example. forum.xda-developers.com/showthread.php?t=611007
CUSTOM-djet-CameraSettingsPatch , it is a rar file costum patch. when i down load it has a folder and a files where do i place the folder and where do i place the files on my THC HD2
Thats an OEM package for use in kitchens when cooking ROMS. You cant install it to a running system. (Well, not in that form anyway)
tazwik said:
ok for example. forum.xda-developers.com/showthread.php?t=611007
CUSTOM-djet-CameraSettingsPatch , it is a rar file costum patch. when i down load it has a folder and a files where do i place the folder and where do i place the files on my THC HD2
Click to expand...
Click to collapse
I made the files into a cab for you.
zelendel said:
I made the files into a cab for you.
Click to expand...
Click to collapse
What does that one do exactly?
sirphunkee said:
What does that one do exactly?
Click to expand...
Click to collapse
From the look of the reg it enables one of the hidden functions in the camera. I thought most cooks enabled all the functions when they cooked up the rom but could be wrong. I know I do
zelendel said:
From the look of the reg it enables one of the hidden functions in the camera. I thought most cooks enabled all the functions when they cooked up the rom but could be wrong. I know I do
Click to expand...
Click to collapse
Gotcha, thanks man! Just wanted to be sure I wasn't missing anything I don't already have
icons
can u help me with one more thing. i downloaded some icons. it does not have any other files but icons and album file. when i place the file into the windows directory. gives me an message that it can not be overitten due to not enough space and file is being used. how do i change go around it.
thks jelendel. for making file in to cab.
similar problems/questions
most cab files/apps i download and install are very straight forward and I save to storage card and there are right there on my "start" screen. others I download and I cant find them? I look through the file explorer but either cant find them or dont know what to do if I do find the file.
example, egg timer 1.0 -I can find it listed on "remove programs" page page so I know I got it. but how do I get it to a more 'usable' location.
another example. I want to get the Bluetooth toggle (BTtoggle) from pocketnow site. I downloaded the app, then it says I need to edit my registry (I understand the dangers of this) at
"HKLM\software\HTC\Manilla" and change the value of HomeLSKPath to the path to your BTtoggle.exe .....etc.....
First time editing registry, so sounds like I need to get a registry editor. I looked for a free one. CeRegEdit version 5.2.exe file. looks like it downloaded ok but I cant find on device??
LASTLY, I use CoOkies home editor and I really like it, but does that mean I cant do other changes/app installs to any HTC sense items/lock screen/home screen/etc? thanks for reading this far....steve
Or if you know of easier to get bluetooth toggle or any kind of timer applications so I dont burn food at the fire station, feel free to reccomend...Thanks
808Granato said:
Or if you know of easier to get bluetooth toggle or any kind of timer applications so I dont burn food at the fire station, feel free to reccomend...Thanks
Click to expand...
Click to collapse
Aloha, and just because you're in civil service like that, I'll give you a hand with this one here...but it's usually best to open a new thread with a bunch of questions like that. You can just edit your post above to just say "moved to new thread", and then copy all that you wrote into a new thread you start...you'll probably get more views/responses that way too
These cabs will give you a toggle for bluetooth, wifi, and a reset button. Once you run the cab, you can find them in your start menu, but they're most useful when you assign them to one of the quicklink spots (on your home tab), just like you would any other program.
P.S. you'll find a lot more useful stuff for your new phone right here in these forums, and 99% of it is free, and known to work on the HD2 (unless stated otherwise). Start HERE and HERE
Ok heres my dilema:
I wan't to cook in loads of manila files, but theres a few different versions of each one, and they aren't going into windows.
its better I explain it, heres an example:
Root Folder
\Folder 1
¬FileX
\Folder 2
¬FileX
\Folder 3
¬FileX
How can I do this? is I cant put the same file (FileX) in the files folder of a package as it has the same file name... The only way I can think of is to have a seperate package for each invidual file, and considering theres over 40 files, its going to take a long time!
Are there anymore efficient ways to do this? Thanks
SOLVED: AIRXTREME HAS MADE A UTILITY FOR CHEFS TO FIX THIS VERY PROBLEM:
[GET IT HERE]
THANKS AIRXTREME!!!
[★] said:
Ok heres my dilema:
I wan't to cook in loads of manila files, but theres a few different versions of each one, and they aren't going into windows.
its better I explain it, heres an example:
Root Folder
\Folder 1
¬FileX
\Folder 2
¬FileX
\Folder 3
¬FileX
How can I do this? is I cant put the same file (FileX) in the files folder of a package as it has the same file name... The only way I can think of is to have a seperate package for each invidual file, and considering theres over 40 files, its going to take a long time!
Are there anymore efficient ways to do this? Thanks
Click to expand...
Click to collapse
If all these files go into "\Windows", there will be only one in the end ... not 40. Meaning the last "FileX" your kitchen finds will have overwritten all the others ...
You can't end up with all these files, without doing a little bit of legwork.
When you cook a ROM, all the files end up in \Windows, and are then moved around as required.
So, you could either cook all the files in with different names (so they don't overwrite) and then move them using a provxml or initflashfiles.dat, or you could cab up all the files, and run the cab after first boot.
The easiest way is to use a cab or to put everything in a zip file and use an 'inzipall' mortscript to unzip the folders wherever you want during customization.
Diegis0n said:
If all these files go into "\Windows", there will be only one in the end ... not 40. Meaning the last "FileX" your kitchen finds will have overwritten all the others ...
Click to expand...
Click to collapse
Yeah thats what I thought , althought I didnt know they went into windows first, thanks.
l3v5y said:
You can't end up with all these files, without doing a little bit of legwork.
When you cook a ROM, all the files end up in \Windows, and are then moved around as required.
So, you could either cook all the files in with different names (so they don't overwrite) and then move them using a provxml or initflashfiles.dat, or you could cab up all the files, and run the cab after first boot.
Click to expand...
Click to collapse
Hmm the cab sounds like a good aproach, although still I wouldn't be able to have more than one manila file with the same name in the cab.
Farmer Ted said:
The easiest way is to use a cab or to put everything in a zip file and use an 'inzipall' mortscript to unzip the folders wherever you want during customization.
Click to expand...
Click to collapse
hmm thats a good idea, could you point me to that script please
[★] said:
Yeah thats what I thought , althought I didnt know they went into windows first, thanks.
Hmm the cab sounds like a good aproach, although still I wouldn't be able to have more than one manila file with the same name in the cab.
Click to expand...
Click to collapse
Cab files do allow you to specify the paths, so they do allow you to have files with the same name. WinCE CAB Manager is a good choice to create cabs. You can then use RunCC / Autorun/ XDA_UC to install it during the first boot.
[★] said:
hmm thats a good idea, could you point me to that script please
Click to expand...
Click to collapse
Just take a look at this package; it has a zip file, a mortscript, and the add2config that you need. Here's a mortscript package that you can use.
You could also rename the files for example "1_FileX", "2_FileX" and have initflashfiles.dat rename it to the filename you want it to be, like so:
Directory("\Folder_1"):-File("FileX","\Windows\1_FileX")
Directory("\Folder_2"):-File("FileX","\Windows\2_FileX")
Click to expand...
Click to collapse
But that would really clog up your ROM, so the mortscript way is better.
ock said:
Cab files do allow you to specify the paths, so they do allow you to have files with the same name. WinCE CAB Manager is a good choice to create cabs. You can then use RunCC / Autorun/ XDA_UC to install it during the first boot.
Click to expand...
Click to collapse
Yes but putting the files in will overwrite eachother, as they have to have the same file name
Farmer Ted said:
Just take a look at this package; it has a zip file, a mortscript, and the add2config that you need. Here's a mortscript package that you can use.
Click to expand...
Click to collapse
Thanks I dont understand what the mortscript for is (the one from 4shared) but Im using the add2config package, I think I get it I will let you know when its finished cooking. Although I am having a problem where none of my add2config packages are working so it might be useless
seeM_ZA said:
You could also rename the files for example "1_FileX", "2_FileX" and have initflashfiles.dat rename it to the filename you want it to be, like so:
But that would really clog up your ROM, so the mortscript way is better.
Click to expand...
Click to collapse
Yeah but the files have to keep the same name
You need mortscript support cooked into your rom one way or another if you're going to use zip files; that's what the 4shared package is for.
l3v5y said:
So, you could either cook all the files in with different names (so they don't overwrite) and then move them using a provxml or initflashfiles.dat
Click to expand...
Click to collapse
+1 for this...
ai6908 said:
+1 for this...
Click to expand...
Click to collapse
That's ok if you're talking a couple of files, but if you're talking a few dozen (or more), then putting together all the initflashes scripts will get tedious.
Farmer Ted said:
That's ok if you're talking a couple of files, but if you're talking a few dozen (or more), then putting together all the initflashes scripts will get tedious.
Click to expand...
Click to collapse
Did you get my message?
and yeah, it seems your mortscript may be easier If I can get add2config to work lol
SOLVED: AIRXTREME HAS MADE A UTILITY FOR CHEFS TO FIX THIS VERY PROBLEM:
[GET IT HERE]
THANKS AIRXTREME!!!