Is it safe to install SetCPU on the MyTouch4G now that we have permaroot? If so, what are the settings we should use with it? Just not sure if the current kernel has been tested with SetCPU or not, and if it works what version of SetCPU... 2.0.3 or 2.0.4?
Thanks.
I am running 2.0 4 with autodetect. Set at 1024mhz performance. No issues and been running 3 days now.
Sent from my HTC Glacier using XDA App
Mr Bill Florida said:
I am running 2.0 4 with autodetect. Set at 1024mhz performance. No issues and been running 3 days now.
Click to expand...
Click to collapse
So you're not overclocking it then, correct? What is your setting for the minimum frequency?
I have it at 245mhz.
Sent from a rooted myTouch4g Glacier.
set up a profile under screen off and set max down to 3000 and minimum at 2000...saves me ton of battery power now
also download auto killer memory in market and set to optimum for even better battery life
I thought that over clocking required a custom kernel?
Sent from my anti titanic
thelamacmdr said:
I thought that over clocking required a custom kernel?
Sent from my anti titanic
Click to expand...
Click to collapse
You do.
Sent from my HTC Glacier using Tapatalk
Were not overclocking... simply managing the CPU more efficiently at its existing speed set
Sent from my HTC Glacier using XDA App
awdlexusis said:
set up a profile under screen off and set max down to 3000 and minimum at 2000...saves me ton of battery power now
Click to expand...
Click to collapse
The closest options for this are the following:
368640 max
245760 min
What did you use for the scaling and priority settings?
EDIT - Added a screenshot to this post. I've tried both 2.0.3 and 2.0.4, and no matter what I set for the minimum setting it stays at 245 (not what I defined). Does it not work then on this stock kernel?
I was going to say the same thing, from what I have seen on my phone setcpu is not doing anything. It won't change any of the clock speeds whether boosting the low end or limiting the high end.
I have tried a few things like setting profiles for less than 75% battery to lower the max clock speed and that doesn't work either. Am I crazy or are others experiencing a placebo effect on profiles lowering clock speed when screen is off?
Sent from my HTC Glacier using XDA App
slowestcivic said:
I was going to say the same thing, from what I have seen on my phone setcpu is not doing anything. It won't change any of the clock speeds whether boosting the low end or limiting the high end.
I have tried a few things like setting profiles for less than 75% battery to lower the max clock speed and that doesn't work either. Am I crazy or are others experiencing a placebo effect on profiles lowering clock speed when screen is off?
Click to expand...
Click to collapse
For HTC phones need to be rooted and also disable perflock. In setcpu: menu->perflock disabler. I set my perflock to disable on boot.
vels13 said:
For HTC phones need to be rooted and also disable perflock. In setcpu: menu->perflock disabler. I set my perflock to disable on boot.
Click to expand...
Click to collapse
Hot damn, that fixed it! Now to test it out further to see how well it works here. I'm not looking to overclock, just underclock when I'm not using the phone. Thanks for the tip!
dustrho said:
The closest options for this are the following:
368640 max
245760 min
What did you use for the scaling and priority settings?
EDIT - Added a screenshot to this post. I've tried both 2.0.3 and 2.0.4, and no matter what I set for the minimum setting it stays at 245 (not what I defined). Does it not work then on this stock kernel?
Click to expand...
Click to collapse
yes thats the correct setting i didnt know off hand the exact.will stay at minimum untill needed,im on on demand
Best settings for battery life?
Here are my settings and have worked very well. Almost adding 24 hours of battery life.
CBConsultation said:
Here are my settings and have worked very well. Almost adding 24 hours of battery life.
Click to expand...
Click to collapse
wow... what kind of use are you putting on it? Also are you having any issues with lag or slow response?
Daguse said:
wow... what kind of use are you putting on it? Also are you having any issues with lag or slow response?
Click to expand...
Click to collapse
Just an average power-user. I email and text a lot as I own a consulting business. I am constantly on the go and need my battery to stretch as long as possible.
That is why I kept the stock kernel and didn't over-clock. I simply removed all the bloatware and non-essential apk's that I didn't need and set up a few profiles in SetCPU and now I can get an easy 2 days of power use out of it.
As I still employ the stock kernel and stock ROM I have no lag what-so-ever. Response is perfect IMHO.
CBConsultation said:
Just an average power-user. I email and text a lot as I own a consulting business. I am constantly on the go and need my battery to stretch as long as possible.
That is why I kept the stock kernel and didn't over-clock. I simply removed all the bloatware and non-essential apk's that I didn't need and set up a few profiles in SetCPU and now I can get an easy 2 days of power use out of it.
As I still employ the stock kernel and stock ROM I have no lag what-so-ever. Response is perfect IMHO.
Click to expand...
Click to collapse
SO I am new to this... I used your same settings and my bat shows 56%. On the my screen it still shows that its jumping from 1024-245. Am I missing something?
EDIT: N/M I am just dumb and forgot to preflock!
So I set my profile to have
Screen Off Pri 75 Max 3K Min 2K
Bat 75% Pri 50 Max 7K Min 2K
Bat 50% Pri 50 Max 3K Mn 2K
I will let you know how it goes but I am hoping for some good bust in bat life.
Had some issues when waking the phone, so I changed the settings on the screen off to Max 768. Going to test.
I also moved the 50 Bat to 30 and still getting good life out of it.
Well I have been experimenting with some profiles in setcpu and I have noticed a great increase in battery life especially when in standby a lot.
So i have done this according to what works for everyone else. But... my battery still drops from 100 down to 40 in about 5hours and it has been this way since the 2.2.1 smh. I dont kno what to do. I do text alot and get on facebook mobile semi frequently but mainly text and omg the phone gets up to 104 degreez wen using or charging. Any suggestions ? Or anythjng i may be doing wrong
Sent from my HTC Glacier using XDA App
Guys, I've read a lot of threads, but didn't come to a conclusion.
I'm looking for a kernel which allows to use FauxDisplay control app as I'm not satisfied with colors and the one which allows to reduce the temperature of device because mine is getting really hot. I'm not interested in battery life - i'm going to manage this through disabling applications which run in background.
Thank you.
Colors: PA Rom
Temp: Franco (it has color settings too)
calanizzle said:
Colors: PA Rom
Temp: Franco (it has color settings too)
Click to expand...
Click to collapse
I just came from Franco, it has good CPU control but doesn't off the Faux123 interface that FauxDisaplay needs for the full colour and detailed gamma control.
I'm using Matr!x 7.5 which seems to be the best of both worlds, so far..
You know with the last firmware we got a limitation on the maximum brightnes due to "solving the overheating problem"... Is there any way to revert it back to a very bright screen? It's very bad right now to see this awesome display rouined....
For good battery life what amount dpi should I set? I know the default dpi for note 3 is 480! And if I want to increase my battery life should I reduce the dpi?
Need to know about mobile screen dpi
ornobohornish said:
For good battery life what amount dpi should I set? I know the default dpi for note 3 is 480! And if I want to increase my battery life should I reduce the dpi?
Need to know about mobile screen dpi
Click to expand...
Click to collapse
I can only say, DPI has nothing to do with your battery life.
It is your phone usage, installed apps, running in bacground apps which will affect the most.
If I set lower DPI (Dot Per Inchi) so my device regulation goes low, whenever regulation is low, isn't battery consume lower energy?
ornobohornish said:
If I set lower DPI (Dot Per Inchi) so my device regulation goes low, whenever regulation is low, isn't battery consume lower energy?
Click to expand...
Click to collapse
No, your phone display uses still same amount of energy to display. The only change appears in objects size on your display.
Will flashing a custom rom provide a better display brightness accuracy? On Stock the slider has to be at least at ≥60-70% for proper viewing.
Try EX kernel/manager and set minimum brightness to 42
uglavnom_bezopasni said:
Try EX kernel/manager and set minimum brightness to 42
Click to expand...
Click to collapse
Will this work with the stock kernel? If not what kernel are you running?
I dirty flashed from 9.17 and now the brightness is so much higher for me. If before I was using 50% not the equivalent is like 15%.
suvam69 said:
Will flashing a custom rom provide a better display brightness accuracy? On Stock the slider has to be at least at ≥60-70% for proper viewing.
Click to expand...
Click to collapse
This seems to be fixed in A10 stable.