So far im liking my hd2 but the touch screen seems to sensitive especially in situations were im just holding the phone with the keys unlocked. it calls everybody. the funny thing is when im trying touch a link or something on opera it wont ****ing press. but if i put in my pocket, it does everything it can possibly start. any solutions would be appreciated.
fatalvision2 said:
So far im liking my hd2 but the touch screen seems to sensitive especially in situations were im just holding the phone with the keys unlocked. it calls everybody. the funny thing is when im trying touch a link or something on opera it wont ****ing press. but if i put in my pocket, it does everything it can possibly start. any solutions would be appreciated.
Click to expand...
Click to collapse
lol... I have had the same problem and fixed it by changing the REgistry as indicated in tap #44 of the following link
http://forum.xda-developers.com/showthread.php?t=583638
Hope this helps. Also other tweaks that are helpful.
I think the same thing that registry edit does is also available in cab format, in the 2nd post of THIS thread, 7th item on the list
bsb tweeks can
Yeah i also uses B&B tweaks to but I guess if you want a more precise touch you can use the reg editing.
ive used both the cab and bsbtweaks and I find bsb better. it adjusts the same reg entries, but different values.
Related
On My Sprint Mogul/6800, with out-of-the-box ROM (upgraded to version 3.35.651.2 (the 2/22/2008 HTC update) at the Sprint store), I'd like to increase the touch sensitivity for easier scrolling with FTouchFlo, sliding with SCLPC++, and general finger-tapping. Particularly needed since I'm using a screen protector.
Searching this forum turned up some registry edits on the Elf/Touch (HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold) as described here:
http://forum.xda-developers.com/showthread.php?t=360564
However, when browsing my own registry with Total Commander, I don't see the TouchPanel key (neither in HKLM\Drivers nor HKLM\Software\Drivers).
I've seen this registry setting mentioned as well:
HLKM\HARDWARE\OEM\TOUCH\CALIBRATENOTES
But I couldn't find that one either. I have HKLM\HARDWARE\DEVICEMAP\TOUCH\CalibrationData, but that seems to contain the 5 coordinates (4 corners + center) for screen calibration, no sensitivity data.
So -- any clues on how to increase the pressure sensitivity on the 6800?
I agree I need some settings too
Well i can tell you it wont be under calibration data. that has to do with the accuracy of pinpoints on the screen, like when you recalibrate after reflashing or starting up for the first time. ill check around the registry and see if i find anything of interest.
you may just need to create the key yourself with the correct name indicated.
I've tested this out by creating the following registry keys & values:
HKLM\Drivers\TouchPanel\PressureThreshold
HKLM\Software\Drivers\TouchPanel\PressureThreshold
HKLM\Hardware\DeviceMap\Touch\CalibrateNotes
I've tried values ranging from single digits and 100's, to 50,000, to 100,000. Still no change in sensitivity either way.
Any other ideas?
--> Shamelessly bumping my own thread, because I still haven't found an answer yet
SenseiMP said:
--> Shamelessly bumping my own thread, because I still haven't found an answer yet
Click to expand...
Click to collapse
Sorry about your trouble. I don't have an answer for you either. My guess is there is an inherent difference in the devices. I will try and play around with it over the weekend and see if I can come up with anything.
SenseiMP said:
On My Sprint Mogul/6800, with out-of-the-box ROM (upgraded to version 3.35.651.2 (the 2/22/2008 HTC update) at the Sprint store), I'd like to increase the touch sensitivity for easier scrolling with FTouchFlo, sliding with SCLPC++, and general finger-tapping. Particularly needed since I'm using a screen protector.
Searching this forum turned up some registry edits on the Elf/Touch (HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold) as described here:
http://forum.xda-developers.com/showthread.php?t=360564
However, when browsing my own registry with Total Commander, I don't see the TouchPanel key (neither in HKLM\Drivers nor HKLM\Software\Drivers).
I've seen this registry setting mentioned as well:
HLKM\HARDWARE\OEM\TOUCH\CALIBRATENOTES
But I couldn't find that one either. I have HKLM\HARDWARE\DEVICEMAP\TOUCH\CalibrationData, but that seems to contain the 5 coordinates (4 corners + center) for screen calibration, no sensitivity data.
So -- any clues on how to increase the pressure sensitivity on the 6800?
Click to expand...
Click to collapse
I believe those registries are created when the Touch Flo Cube is installed. It is mainly for cube sensitivity. If you are simply running TouchFlo, you will not find these keys.
mromblad said:
I believe those registries are created when the Touch Flo Cube is installed. It is mainly for cube sensitivity. If you are simply running TouchFlo, you will not find these keys.
Click to expand...
Click to collapse
I'm using Efrost's FTouchFlo, and Slither's SCLPC++ cube. Of course, these are clones/rewrites/whatever of the actual software on the HTC Touch, since I have the 6800/Titan/Mogul.
I got the impression that these registry entries were for general system-wide sensitivity, not just the Cube -- so I was hoping there might be something similar I could do on my device
Searching the web I found this Pdf:
Maybe it can help
I read somewhere that how you do the screen configuration affects the sensitivity. Like if you push the points hard during calibration the screen will be calibrated for hard presses (less sensitive). Light presses during calibration, light presses (more sensitive). I have always treated it this way and as far as I've been able to tell, that's how it works. I could just be nuts though =P
I would like some help.
Part of my Prophet screen doesn't work anymore.
This means aligning is hell.
I would like to squeeze some more life out of the thing ...
Especially with guys like Gullum, Cloudifa, and all the other ones ...
I have already found out the registry key is
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
I have only found values for elf, atom and others on the net.
But they are not yet as close to Prophet (atom is OK except for the far right side of the screen (scroll ...)
Could someone please be able to give me the values on their prophet ?
Want to post it instead of messaging directly to keep this on the forum for others.
If I should have missed an earlies posting woth the settings, sorry, please then redirect me.
dkleuven said:
I would like some help.
Part of my Prophet screen doesn't work anymore.
This means aligning is hell.
I would like to squeeze some more life out of the thing ...
Especially with guys like Gullum, Cloudifa, and all the other ones ...
I have already found out the registry key is
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
I have only found values for elf, atom and others on the net.
But they are not yet as close to Prophet (atom is OK except for the far right side of the screen (scroll ...)
Could someone please be able to give me the values on their prophet ?
Want to post it instead of messaging directly to keep this on the forum for others.
If I should have missed an earlies posting woth the settings, sorry, please then redirect me.
Click to expand...
Click to collapse
These values are unique to each device. If every device was the same, there would be no need for this!
From my ROM setup: 1839,1997 3118,684 3126,3328 577,3291 602,690
Thanks !
I know about the unique settings, but with your prophet settings I can try to come closer thn woth settings fora completely different device, and maybe tweak a bit more myself through remot registry editor.
Thanks again!
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
1942,1963 3228,622 3197,3268 664,3267 675,653
Device G3
Rui
pls help me.... pls
were i found this "HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings'' ?
jhonnyyy said:
were i found this "HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings'' ?
Click to expand...
Click to collapse
You need a registry editor. If you just want to realign the screen, hold the windows hardware button and then press the centre d-pad button.
salll
tnx...but my PDA doesn't allow to finish the align screen process, one of the corners i can't align it...maybe phisical problem???
jhonnyyy said:
tnx...but my PDA doesn't allow to finish the align screen process, one of the corners i can't align it...maybe phisical problem???
Click to expand...
Click to collapse
Maybe a hardware issue...
Try using a registry editor (I'd use this) to edit the settings using those above... May not be perfect but may help....
Has anyone encountered this problem??
On an incoming call, I attempt to press "ANSWER" on the touch screen and nothing happens. Pressing "IGNORE" seems to work.
I have the following installed:
- Gyrator 2
- Diamond Tweak 0.5.3
- TF3D Configuration 0.6.7
- AppToDate
Could any of these be creating some form of conflict? I know I should probably delete one by one, but was wondering if anyone else has heard of this.
Thanks
Lee
Chek in: \windows\startup
What do you have?
Sergio PC said:
Chek in: \windows\startup
What do you have?
Click to expand...
Click to collapse
I have the following in Windows\Startup\....
- GAlarm Reload
- Personalizer
- poutlook
- Services
- Voice Command
Also, it seems to be an intermittent problem, which makes it even more frustrating!!
Nooo all good there I was wondering if you had a keydisabler, but you dont.
When things go sour on you phone you should preform a hard reset that solves all problems.
Greets.
I know this is my first post but my answer key became unresponsive when I changed the pressure sensitivity of my screen...
I used the values people posted on the forum and everything else was fine but the green answer key on the screen wasn't working properly. I changed the values back and it works fine now!
wolf peterson said:
I know this is my first post but my answer key became unresponsive when I changed the pressure sensitivity of my screen...
I used the values people posted on the forum and everything else was fine but the green answer key on the screen wasn't working properly. I changed the values back and it works fine now!
Click to expand...
Click to collapse
Could you please tell me where in the registry you made those changes so I could check the values. Also, let me know what values you have listed so I can compare.
Thanks
1. Can the sense UI be somehow positioned into landscape mode with a .cab?
2. How do you get into the registry? All visible is HKM? no HKLM files found anywhere...
3. How to search for specific threads under one phone on xda.
Knucklessg1 said:
1. Can the sense UI be somehow positioned into landscape mode with a .cab?
2. How do you get into the registry? All visible is HKM? no HKLM files found anywhere...
3. How to search for specific threads under one phone on xda.
Click to expand...
Click to collapse
1. Yes, use attached cab. It will rotate the display when you rotate the phone into portrait. I only know this to be working on the HD2.
2. What registry editor are you using?
3. Navigate to the forums for that model, and any of the subforums there that apply to your question, and then use the "search this forum" button in the top right, immediately above the list of threads.
Thanks ALOT, you dont know how much this helps, also i am using RESCO for registry, but i think i found a youtube video for that. Thanks alot, if i could award you something i would, (if there is, please do tell as well) (like a thumbs up, or +karma, or whatever this site may use if any)
sirphunkee said:
1. Yes, use attached cab. It will rotate the display when you rotate the phone into portrait. I only know this to be working on the HD2.
2. What registry editor are you using?
3. Navigate to the forums for that model, and any of the subforums there that apply to your question, and then use the "search this forum" button in the top right, immediately above the list of threads.
Click to expand...
Click to collapse
ok so for the landscape cab, do i need a soft reset, and would you happen to know if cookies home screen mod works with the hd2 landscape? also, how do i find this app in the start menu, when i soft reset my phone, nothing happened when i switched my phone to landscape, any ideas?
I'm afraid that I have no idea if this works or not alongside of co0kie's mod. A soft reset after running the cab should be all you needed to get the rotation working, there's no app to run (or icon for it) after that, it just runs in the background.
You can try one more soft-reset (I think mine took 2 to kick in), and I would also go into settings and calibrate your g-sensor if you haven't already.
Also...are you rotating it the right way into landscape? so that the hardware buttons end up to the right of the screen? This cab will only do the rotation in that direction, and back.
I'm afraid the only officially-sanctioned expressions of gratitude here are the ones issued by the treasury...but this small bit of assistance isn't even worth the time it would take, so your words do the job just fine Pay it forward (here at xda, if possible!)
FYI:
It does work with co0kie's mod but it replaces some of the menu items while in landscape. I can definitely live with that, thank you for the awesome app.
S_M_E said:
FYI:
It does work with co0kie's mod but it replaces some of the menu items while in landscape. I can definitely live with that, thank you for the awesome app.
Click to expand...
Click to collapse
You're very welcome, glad it's working for you
For anyone that hasn't seen that tweak before, you'll want to check out the thread I found it in, there's a bunch more very useful stuff in there:
http://forum.xda-developers.com/showthread.php?t=584415
Hello,
I have the T-Mobile USA HD2, with the stock T-Mobile ROM 2.13 (the one that came with it, I just have not gotten around to updating it to the newer one yet).
When I first got it the G-sensor seemed to rarely work, to change the screen to landscape, etc..
I did something to make the G-sensor more sensitive, or the phone more responsive to it.
But now I find it way too responsive. The display is often going to landscape, or turning completely upside down, without me intending that, from the slightest movement of the phone.
So now I want to reduce that sensitivity.
Problem is--I cannot recall what I did before, that made it more ssnsitive--whether it was some kind of setting, or with some tweaking app, or directlly in the registry.
I cannot figure out how to lower that sensitivity now. There is a G-sensor applet in Control Panel, but that is only to calibrate it, not to adjust the sensitivity.
Can someone please tell me how to do this?
Thank you in advance.
Did you use someting like BsB Tweeks or Touch Tools to adjust the sinsativity? If it was a registry tweek you can probably find it in the "Leo Hints, Tips and Registry Tweaks"
T-Macgnolia said:
Did you use someting like BsB Tweeks or Touch Tools to adjust the sinsativity? If it was a registry tweek you can probably find it in the "Leo Hints, Tips and Registry Tweaks"
Click to expand...
Click to collapse
I have BSB Tweaks , but do not recall seeing a G-Sensor sensitivity setting in it. Is there? Where?
---------
Now I just checked BSB. It has a setting for screen sensitivity, but I think that has to do with the touch screen, not the G-Sensor.
me said:
I have BSB Tweaks , but do not recall seeing a G-Sensor sensitivity setting in it. Is there? Where?
---------
Now I just checked BSB. It has a setting for screen sensitivity, but I think that has to do with the touch screen, not the G-Sensor.
Click to expand...
Click to collapse
Oh sorry I thought BsB Tweeks had a G-Sensor adjuster in it to, guess that is what I get for talking about a app I only used for like 4 days then changed over to Touch Tools. I know Touch Tools has this feature in it. Did you check the thread I linked for registry tweeks?
T-Macgnolia said:
Oh sorry I thought BsB Tweeks had a G-Sensor adjuster in it to, guess that is what I get for talking about a app I only used for like 4 days then changed over to Touch Tools. I know Touch Tools has this feature in it. Did you check the thread I linked for registry tweeks?
Click to expand...
Click to collapse
Did I check that thread? Well, it currently has 240 pages in it! I looked through much of it--a lot of interesting and useful tweaks there!
But no, I did not see (did not read all 240 pages yet though!) a setting for responsiveness to the G-Sensor.
me said:
Did I check that thread? Well, it currently has 240 pages in it! I looked through much of it--a lot of interesting and useful tweaks there!
But no, I did not see (did not read all 240 pages yet though!) a setting for responsiveness to the G-Sensor.
Click to expand...
Click to collapse
Ha Ha Ha I did not mean read the whole thing just the first post that contains the list of registry tweeks and how to do each one. If you did not see it in there then install Touch Tools and use it as I said I know it has the ability to change G-Sensor sensativity.