hi guys
Within the bluetooth profiles in my pro 2 is:
1- phone book access
2- SIM Acsess
3- Hands Free
...so on
using my skoda octavia radio carkit .. the car radio make access to the my phone book and the hands-free is working fine, with my dialled and miss calls showing on the car screan.
but although other mobiles can show also sms in my car radio screan, my pro 2 dose not do that !!!!
is this cause the sms's r not in the SIM so the SIM acsess profile (SAP) is not helping ?? but i thought if so, it would say no messeges ..but there is no any sms section shown on my car screan what so ever
for me i want to know if my pro 2 bluetooth can be modified in a way to make the sms go to the car screan or not
and if not ..
at least i want when i got sms while driving and the hands free activated , any notification or sound occure to know that i recived sms
but instead the sms comes with no sound at all
Related
I'm aware of the various BT issues with the XDA II, and therefore installed BT Tools thinking it may allow me to use my handfree kit. Unfortunately I'm experiencing problems and not sure if this is me doing something wrong or there is a problem with the software. Basically the XDA II does not route either incoming or outgoing calls via the handfrees unit. I have do the following:-
1. Installed the latest BT Tools.
2. Created a bond with the Nokia Handfree kit, when prompted for the BT profile (the BT Tools icon screen) I select headset only.
3. Enable BT on the XDA II
When I make or receive a call is there any button or menu I should be selecting to enable the handsfree unit?
From the Today screen, make sure bluetooth headset mode is enabled.
And if Bluetooth Headset Mode does not appear on the today screen:
Start -> Settings -> Today -> Items and make sure Profile is checked. That will put the headset mode switch on the Today screen.
Thanks for the suggestions, I must admit I had missed the headset profile on the Today screen.
Even with the device paired, BT enabled & the Headset enable neither incoming or outgoing calls are routed through the handsfree unit.
Any other suugestions welcomed...
With the new bluetooth tools you need to transfer the call to the headset...
I find the best way when dialing is to have the phone ready to dial, then i hit the answer button on the headset causing the phone to dial & transfer sound to the headset @ the same time.
When answering the call the headset should ring and you press the answer button on the headset to recieve the call.
Ta
Christian
When you say press the headset button are you referring to the headset icon on the XDA or the Nokia handsfree button?
If its the Nokia button , I'll try this tomorrow, if not, then the icon does not ring and when receiving a call it is covered by the incoming call window.
Many thanks...
the nokia headset button
ta
Christian
Yep thats what I thought, I think I can confidently say there is a compatability issue with using the current version of BT Tools with the new Nokia CK-7W handsfree kit.
I've read the user manual for the handfree kit and that refers to switching/transferring the call between the BT devices using the button. The unit clicks as if there's something happening, but no call is heard, the unit works perfectly with a BT phone connected both Nokia & Motorola.
I would try uninstalling pocket BT tools - for using a headset it is of no additional value anyway. I do not have it installed and have never had any problems making or receiving calls with my SE HBH-30 headset.
Try using the earlier version of bluetooth tools, make sure you uninstall the version you have and also unbond/remove bluetooth pairings, rebond after successful install.
Pocket Bluetooth Tools is perfect! This is what I'm looking for, except I can't figure out how to listen to music thru my bluetooth headset.
Thanks for the great tool though, now I can make calls with my headset.
BRosenow said:
I would try uninstalling pocket BT tools - for using a headset it is of no additional value anyway. I do not have it installed and have never had any problems making or receiving calls with my SE HBH-30 headset.
Click to expand...
Click to collapse
The BIG advantage is battery life and not having to re-enable the headset profile each time you switch on the phone! With both PBT and/or Profile not displayed, I also get more Today real estate to play with.
With BT on all the time, I'm lucky to get four hours usage out of my Xda II, with PBT turning it off after five minutes the time can go up to almost seven. Sure, there is a short lag between call coming in and the headset (HBH-65) ringing but I can live with that and it even works well with Pocket Zen Phone. I also like the last number redial facility it adds to my headset. PBT rocks!
I found one problem with this program. My device won't automatically turn off after installing this tool. The backlight turns off, but not the device after certain minutes set. Who do I report the problem too.
i have got this problem to carnt get the xda i to connect to my car blue tooth hands free kit it finds the kit but nothing gome on guy get ya thinking heads on n help :idea: to revolve this problem
i have got this problem to carnt get the xda i to connect to my car blue tooth hands free kit it finds the kit but nothing gome on guy get ya thinking heads on n help :idea: to revolve this problem
Hi everyone,
well, I got the same problem :x with my XDA2, also called Qtek 2020, and Nokia carkit 112. It just does'nt work, even with BT tools. But I wonder how you get the icon screen while connecting to your Nokia carkit...cause mine is going straight back to the "Bluetooth connected devices" screen. I only got the icon screen, enabling the profile selection, while connecting to my Nokia 6310i phone.
Let's hope that HTC is gonna come up with Handsfree profile soon...
Regards to all, special ones to our OZ friends!! Mates, I really enjoyed living in Sydney, even if Italy is quite convenient as well.
Chris
Hi all
does anyone know if there is a app that while in bluetooth sync mode with a bluetooth handsfree device could launch a switch when a incomming call comes in to give the option to select the call by bluetooth or phone or phones speakerphone? i saw this option on a iphone. if this app is not available could some maybe create one? this would be a great function for windows mobile device. i do know that there is a option after you answer the call to turn off the bluetooth but its in the menu option and not as accessable...
thanks for you help..
J
It should work simply like this on WM phones (at least on all the WM phones I have). When a call comes in:
1. If you press talk button on your Bluetooth handsfree, the call should get picked up through the handsfree.
2. If you answer the call on the phone by pressing either software or hardware button, the call is picked up on the phone.
Thank you for your reply i just have another question
will that be the same for if the phone was synced to a car bluetooth kit as well? i just want to know if so as maybe the rom i have has problems doing this...
I tried to do what is posted and it did not work for the car i answered from the hardware keys as well as the software keys and still picked up in the car. i jave to click menu then turn off hands free. is there some other option i need to select in some settings to change the way the hands free works? I will try with a blue tooth ear piece to see if there is a difference..
In looking more into this there are 2 profiles 1 is headset and the other is handsfree i believe ear pieces use the headset profile and car kits use handsfree profile i did check the earpiece and it worked as described above does anyone know how to change the handset profile? is this a reg setting or can someone tell me how these profiles are stored in winmo 6.5?
I'm having much fun with my new Legend, and I love android 2.1!
Everythings goes smooth except the connection with my car.
I have a pretty new Audi TT from 2008, and with my old phone (t-mobile G1), I used it without a problem for over a year.
One month ago I bought the Legend, and bluetooth connection to the car seems to hang!, Even when I disable bluetooth, the phone becomes slow, and the bluetooth icoon keeps displaying in my notification erea.
One thing works, when I reset the phone, I can use the carkit for about 10 minutes, then it starts to disconnect. The adress book never syncs.
Can people please reply if they got their legend work properly with their bluetooth car kit.
Also when other people have problems, please reply here!
Thnx
I have a mini cooper S with BT car kit.
The connection is good and all the contats are correctly transferred but sometimes the connection has been lost.
It seems it happens during the net switch (between UMTS/GSM).
Same problem here. Kenwood DDX7029 with BT. 5 out of 10 times the phone won't connect when starting the car. Dis- and enabling BT does the trick.
David67 said:
I have a mini cooper S with BT car kit.
The connection is good and all the contats are correctly transferred but sometimes the connection has been lost.
It seems it happens during the net switch (between UMTS/GSM).
Click to expand...
Click to collapse
This implies that if you disable data-roaming, it would work all the time?, I'm gonna try that out! Thanks for your reply!
Hi there. My first post in XDA
So cool that I found this thread because I have the exact same problem. I have an Audi A3 and the bluetooth connection is 9 out of 10 times lost during conversations and then the bluetooth icon just hangs until I boot the phone.
I'm gonna try to disable the data-roaming and see whether it works.
Still problem carkit/bluetooth Legend!!
Hi all,
I still/also experience problems with my Audi A4 carkit.
Also my colleague with a Opel Insignia experiencing the same problems.
I have to reset the bluetooth or reboot the phone te fix it
It is very annoying when you loose the bluetooth connection within a call.
I have already sent a message to HTC...and still waiting!
Switching off the data roaming or fix the UMTS/GSM settings doesn't help
Somebody a sollution?
Br Dide
Audi UHV 6654 problems
I have a BIG problem with this car kit connection...BIG means the device is useless till now.
I've paired the Legend with my A4 factory car kit and there are several problems:
1. No sounds come from the speakers (car speakers), still the michrophone is working fine. I had to put the phone on loudspeaker to hear something but of course this is not the normal way of using a car kit
2. There is no sound till the call is actually ongoing (the other party respond)...that means no ringing, busy tone, or whatsoever sound... I don't even know if the call is made if I'm not looking to the phone (and if it's entering power saving mode, I stare at a blank screen).
I don't have any problems of this kind using a Nokia phone and also they (especially point 2) are happening with all smartphones I've tried (WinMo or Android ones).
Is there any software (even a paid one) to outcome this?
Please don't tell me to "try" this and that, I don't want to spend money "trying" things...I would appreciate if someone had a similar problem and managed to solve it somehow.
P.S The phone is brand new (got it for 2 days by now) and it is not rooted.
P.S.2 The car kit is a "basic" one, don't have navigation, contacts downloading and all that stuff...It's a plain BT car kit, I would just like to be able to make and receive phone calls with it.
Seems like many have bad experience in making the legend and car kit work together.
As of yet I could only pair my legend with my blaupunkt audio system, but they have not yet connected each other successfully to make use of the bluetooth feature. I've had no problem at all using my audio set with my samsung galaxy spica's bluetooth. So it probably is not an android issue.
Is there anyone who didn't experience any such trouble with their legend and car audio system's bluetooth ?
To add some more details...
I search for BT devices, phone finds the Audi UHV car kit. Then I'm asked for the pairing password and I enter it, than I get that "connection sound" from the car speakers but the phone is still "connecting..." endlessly. The BT icon on the phone appears but is the standard one, no headset or car kit icon appears (does it have such an icon after all?)
From here...nothing special happens. When I make or receive a call only the phone is ringing, no sounds came from the car speakers. Only when the call is connected, then I have the bord computer showing "Call..." and the radio/CD is muted...and that's all. The conversation can be heard only into the phone not from car speakers as it was the case with the ringing tone before. When call ends, music resumes.
Hi Folk
Ive had a quick search and not found anyone with the same issue.... might be cos the phone is new out.
I have a parrot bluetooth hands-free kit in the car and since changing from the iphone to the DHD i cannot use the call pickup button to call out like i would nomally do in the iphone.
Is there something i need to do or is this function not availble on this phone? Im new to the android software so ive probably missed the obvious.
Thanks in advance
Muzzy
A also have a parrot BT kit ( Mki-9000) but I don't have such issue. I can play music via a2dp, and also I can make calls and everything works fine.
The only issue I have is when i want to answer an incoming call - if I answer through the phone ( by pressing the green button) the sound is not forwarded to the BT kit. I don't have such issues with my Nokia.
I can't test right now what will happen if I answer through the BT kit because my Steering Wheel remote control is out of power.
To resolve your problem try to search the parrot website's forum also check for the latest firmware updates for your device. In the past I have similar issue with HTC3300 but after firmware update it was fixed.
The issue I have (mki9200) is that A2DP seems to be on permantly, so when listening to my ipod through the parrot, if I have satnav on, then the directions come through the parrot kit. If a new email or txt comes in, the notification comes through the parrot. With my old Omnia, I could deactivate the Headset profile (A2DP) and keep the Hands Free profile when I was connected to my parrot.
Can this be done on the DHD.
(ignore my footer - can't seem to change this at the moment)
jazzymc said:
... The only issue I have is when i want to answer an incoming call - if I answer through the phone ( by pressing the green button) the sound is not forwarded to the BT kit. I don't have such issues with my Nokia.
I can't test right now what will happen if I answer through the BT kit because my Steering Wheel remote control is out of power. ...
Click to expand...
Click to collapse
Check out ... http://forum.xda-developers.com/showthread.php?t=834983&page=3 .... my post #22. Should answer your *problem*. I had the same thing when switching from Nokia to HTC .... But if you check a couple of posts later I've also found that I can use the phone to initiate a call and the sound *does* go to the Bt device ....
Dave
Hi i have 3 bugs with the DHD
1. When i let Facebook for HTC Sence sync contackt it adds the phonenumber they have added on theyr facebook. The problem is that many of my fb friends have the number i the wrong format (the have not added the + in fron of the country code) When i go to people or the dailer to ring them i can only choose the fb number with it will not call becouse of the error in format. Is there a workaround for this witch lets me use Facebook for HTC Sense?
2. I have set the notification sound to guitar2 but when i recive a email it is a different sound. In sms i have set the modern sound and that works fine. What am i doing wrong.
3. My car stereo has built in handsfree and music bluetooth. I play music from my DHD on the car stereo, but often when i try to take a call or call somebody the volume on the call i very low, i can not adjust it on the phone or on the stereo. I have had several other phones connected to the stereo and never had this problem befor. Anybody got a clue?
My firmware is: 1.32.405.6
Hope somebody can help me.