Is there a way to flash hard-spl via micro-sd? I've tried but it do not progress from Loading...
It doesn't make sense that you could flash hardspl via SD because the way I understand it, its what lets you flash from SD to begin with.
But then again, the answer you just got is not from a cellphone guru so...
I can't flash HardSPL via USB because smth is broken and PC do not recognize the device.
I've tried to flash it via RAPHIMG.nbh on micro-SD. But after restart it do not progress from "Loading..." screen
Moved as not ROM Development.
Hard-SPL needs to be done via USB use a different computer.
That's bad. My Touch Pro needs motherboard replacement to have USB-sync functions again. It's not a PC problem or cable.
stylez said:
Moved as not ROM Development.
Hard-SPL needs to be done via USB use a different computer.
Click to expand...
Click to collapse
Yep this is 100% true. I had asked this question about a year ago, and got the same answer. Even then I used a FUZE that a friend gave me that worked at AT&T (because I didn't want to brick mine) and I could not get it to hardSPL from SD. Sorry bro.
Related
Hello all,
I'm not sure but i think my blackstone is on its last legs.
It all started after i flashed to Dutty's last rom the r15 one. Did the usual uspl and eveything went to plan. Then about a week ago the phone frooze, i could'nt get it to reset so had to take the battery out (no biggy). Then tried turning it back on, and it just frooze again right at the windows start-up screen. So did a hard reset and the phone seemed very slow and jumpy.
Then i thought maybe the download of dutty's rom wasn't the best. So today i had planned to install a different rom and see if it was just a bad download or sumthing. And heres the big problem, i can't get the bootloader to connect to my pc.
And what seems strange is that when i enter the bootloader it flashes up with the re/green/blue/white screen andt ehn it shows a grey screen with "loading......." for about 10 seconds then comes back the normal bootloading screen. As usual serial pops up at the bottom, but when connected to my pc it won't show USB!!
I have win7 64, but i have set it up so i can flash using USPL as thats how i got dutty's R15 rom on there.
Any help would be great and hopfully i can get this sorted swn as i love my hd.
p.s
i've spent the past 2 hours searching here and havent found anyone with the same problem.
Thanks
Antony
if you could update from the sd card that would solve some of your problems.but i realy do not know if it is working if you do not have HSPL.
maybe you can find some info on the forums about updating via sd card without HSPL.
or you could try to connect to a computer with other operating system than windows 7.
i am now installing the stock rom.
hopefully then i wil be able to install a cooked rom again.
berbecverde said:
if you could update from the sd card that would solve some of your problems.but i realy do not know if it is working if you do not have HSPL.
maybe you can find some info on the forums about updating via sd card without HSPL.
or you could try to connect to a computer with other operating system than windows 7.
Click to expand...
Click to collapse
Thanks for the help,
I will see what the outcome is from the stock rom. And if i can't get it working again with win7 then i'll have to set up my mini pc (made a pc inside an old nintendo SNES) as thats got xp running
thanks once again
just for my curiosity what method are you using to flash a stock rom if you cannot connect to computer through usb?
berbecverde said:
just for my curiosity what method are you using to flash a stock rom if you cannot connect to computer through usb?
Click to expand...
Click to collapse
Well after more hours spent reading thro web page after web page, i stumbled over someone saying that it could be down to the usb cable and i have a few mini usb one, so tried them all, finally got the bootloader to show the usb.
I was then going to install a cooked rom, but thought i'd be the best to go for stock first.
All is working ok now. I'm not sure if it was down to the usb cable totally tho as it was a bit strange the whole grey loading screen on the bootloader which has gone now with the stock rom.
ah well looks like its fixed for now.
Hello fellow HD2 users,
I've got an HD2 T-Mobile UK. I've just tried my luck with HSPL, I've succeessfully installed HSPL using the steps in this thread: http://forum.xda-developers.com/showthread.php?t=609477
However, when I copied the LEOIMG.nbh (1.48 offiicial rom) file to the micro SD 8GB card; and rebooted, things seemed ok untill it suddenly stopped the progress of flashing the ROM and gave me a Grey screen with the Error 00028002 "not Allow" sort of thing.
So I tried yanking battery out, rebooting normally, it displays a grey triangle with " ! " in the middle and then displays the 00028002 error then back to Tri colour bootloader, I noticed that the HSPL is gone and its back now to 1.42.0000
I even tried a Factory reset, it does the reset I reboot, but it still shows me grey triangle and same routine. I've tried everything now. This bloody T-mobile phone is just useless to me at the moment !
Can you please HELP !!! Thank you so much !
Regards !!
Ok found solution, I just had to install the official T-mobile 1.43.110.0 ROM from this link:
http://rapidshare.com/users/258XUJ
After just switching on the phone with microsd inside, I just plugged the usb and started the RUU and followed the steps and things are back to square one now.
not thrilled that it has been a nightmare so far to get a new rom on.
but at least I can use my phone with its basic functionalities. not gona push my luck again...
You cannot flash official ROMS from the sd because it replaces the SPL with a stock one. Presume it got half way through then decided the ROM was not for your device since it hasd replaced the SPL. Cooked ROMS are ok to flash from SD but for Stock use the RUU.
tell me it's working please.my HD2 from UK T-Mob is same "bricked" and in Slovakia is very very difficult to find somebody who can fix this....i think maybe only the HTC repair center
^
If your phone can load up into the boot loader (tri-color screen) your phone is not bricked.
Deeper Trouble:Same error,but cannot use USB!!!
Guys,
im in even much deeper **** now.I accidentally tried flashing a stock ROM via SD card and now ive gt the same ROM code error.What makes this worse is that my Vista computer is not recognizing any USB connection when i connect my HD2 to the computer.If i need to flash a stock rom via RUU wrapper to get through this stupid ROM code error, i need a USB connection at the first place...which IS NOT WORKING NOW!!!...im sitting duck here guys...i really really need your help on this one.im extremely frustrated and helpless.thanks alot...
When u say USB not working, how do you know?
Put phone in bootloader, connect USB cable,,, on phone does "serial" become "USB"? If yes then just run the flash.
samsamuel said:
When u say USB not working, how do you know?
Put phone in bootloader, connect USB cable,,, on phone does "serial" become "USB"? If yes then just run the flash.
Click to expand...
Click to collapse
Go to this thread Sam as kawshigan started a new thread
semo2010 said:
Ok found solution, I just had to install the official T-mobile 1.43.110.0 ROM from this link:
http://rapidshare.com/users/258XUJ
After just switching on the phone with microsd inside, I just plugged the usb and started the RUU and followed the steps and things are back to square one now.
not thrilled that it has been a nightmare so far to get a new rom on.
but at least I can use my phone with its basic functionalities. not gona push my luck again...
Click to expand...
Click to collapse
broken link
i have a tmobile wing and i have vista so i wanted to update my phone with a knew rom version....so i installed windows mobile device center 6.1 ...but it would not sync ,i uninsalled it then reinstalled it no go....so im wondering how can i hard spl my phone without my pc ....and install a rom ...now i tried my wifes touch pro 2 on the windows mobile device center and it works but my wing wont ....anyone ran into this problem or has a solution ...i read a few threads saying hard reset but that did not work
Do you intend to flash with the flash center using the USB cable or have you considered using an SD card to flash your ROM?
If you are using USB to flash have you tried putting your phone into bootloader mode? While pressing the camera button, press the soft reset button below the volume control with the stylus and continue to hold the camera button until the tri colored screen pops up. When it does, look in the bottom left ( if I recall correctly ) to see if it recognizes the USB connection. It will say USB in that bottom left spot if it is connected and you are ready to flash. Ideally you want to be connected via Active sync but it is possible to flash from the bootloader screen.
Consider flashing via SD card. There are many different threads on this and it really is a very simple process. I hear it is also better for flashing because if you unplug the USB cable during a flash you can brick your phone. Just an idea.
Good luck.
yes i would like to flash from wmdc if possible....ill try the bootloader mode first
i just tried it the bars come up and it says usb in the corner ...but wmdc would not recognise it ...is there some settings on the wing i need to do to get it to sync
1milenia said:
i just tried it the bars come up and it says usb in the corner ...but wmdc would not recognise it ...is there some settings on the wing i need to do to get it to sync
Click to expand...
Click to collapse
To flash from the boot loader screen you just need to go through the steps in the flash center. I never looked to see if my computer recognized the phone while plugged in; I just assumed it did not because active sync was not running. You should be able to initiate the flash through flash center and as you go through the steps it should recognize which rom you have loaded and it should read the rom you plan to install (which should be placed in the RUU folder within the flash center). I personally had to do this process about two flashes ago and can verify that it worked for me without having to "be connected" as far as Window's was concerned.
My advice, just go through the steps in flash center and you should see some progress. Good luck.
i went through the process it tells me nothing is connected then i have to exit
1milenia said:
i went through the process it tells me nothing is connected then i have to exit
Click to expand...
Click to collapse
I would then go through the steps to format a 2gb or less MicroSD card and place the ROM file in the root directory and renaming it HERAIMG. From what I hear, this is a safer way to flash anyway so this should be your method whenever possible. There are many threads describing this process. The hardest part for me was to find a way to properly format my card in my computer. My best advice if you have a Dell or another laptop with an SD slot built it, would be to use another port to plug into. I tried for days to find a way or a program to format my MicroSD card in the built in SD slot but no matter what I did, it would not work. Finally, after much frustration, I tried a usb card reader and managed to successfully format the MicroSD on the first try and have been flashing with this method ever since. Hopefully this is all it takes to get you back up and running again. Good luck once again; I'll have my fingers crossed.
HELLO
Please my phone htc p4350 just going to boot loader and not read an activ sync please iwant soulation
Guys,
im in extremely deep **** now.I accidentally tried flashing a stock ROM via SD card and now ive gt a ROM code error and 00028002 'Not Allow" error.What makes this worse is that my Vista computer is not recognizing any USB connection when i connect my HD2 to the computer.If i need to flash a stock rom via RUU wrapper to get through this stupid ROM code error, i need a USB connection on the first place...which IS NOT WORKING NOW!!!...im using a 512MBLeo,which is now stuck at SPL-1.42(previously HSPL)...im sitting duck here guys...i really really need your help on this one.i cant boot normally into 6.5,i cant flash a new ROM,i cant use bootloader and flash a LEOIMG using SD card cus it returns the above errors and i cant use my PHONE!!!...im extremely frustrated and helpless.please help guys...thanks alot...
If I understand you can still get to bootloader correct?
Exactly what official ROM did you try to flash?
Where did you get the ROM from?
Just so you know you can still flash HSPL with the 1.42.0000 SPL you have.
ROM code error usually means that official ROM is not for that HD2.
I flashed '1.48.405.2' which i downloaded from the net(http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/)...I tried flashing LEOIMG(SD card method) from Elegancia GTX v5.0 ROM,but thats returning the same error plus...it gets stuck on the white 'loading screen'.I know i can flash HSPL or any other stock rom with my current SPL,but my USB connection is not working...thats exactly the problem now...any idea where to get the actual stock ROM for my HD2?...Maybe that might prevail...Thanks.
kawshigan said:
I flashed '1.48.405.2' which i downloaded from the net...I tried flashing LEOIMG(SD card method) from Elegancia GTX v5.0 ROM,but thats returning the same error.I know i can flash HSPL or any other stock rom with my current SPL,but my USB connection is not working...thats exactly the problem now...any idea where to get the actual stock ROM for my HD2?...Maybe that might prevail...Thanks.
Click to expand...
Click to collapse
Yes go to htc.com amd enter the serial number of your HD2 (can be found under the battery) and it will only let you download the ROMs that are for your HD2. Also make sure the HTC site you go to is for your part of the world, It has links on the site to go to HTC sites for other countries.
As for your no USB go to your device manager in control panel and find your HD2 ther while it is connected via USB it will be listed as unknown, mobile device, or something like that but it will be there. Just click on it once to get it to drop down to the actual device and then right click it and select update drivers and then select from internet. If this does not work download the latest version of Windows Mobile Device Center (WMDC) and install it to your computer and this should give you the drivers you need.
Alright ill try all that and get back to you.Thanks alot for your advice!
Error Resolved
First,i would like to say thanks to you, T-Macgnolia.The ROM downloaded from the HTC website, which i flashed via sd card worked like a dream...However, the same cant be said for my USB connection though(I tried everything you said).My computer still keeps dropping USB connections intermittently...i miraculously managed to flash HSPL 3 on my HD2 just before the USB connection dropped.I was running WM 6.5 and android previously and i want to dual boot wp7 and android...which needs a USB connection(for MAGLDR and WP7)...Charging works fine via AC charger and via USB port(its just USB connection itself...any ideas where the fault lies?).i personally think the problem lies with my USB cable(as other devices work fine with the USB ports in my laptop). Guess i just have to buy a new micro usb cable(...thanks for your advice again.
kawshigan said:
First,i would like to say thanks to you, T-Macgnolia.The ROM downloaded from the HTC website, which i flashed via sd card worked like a dream...However, the same cant be said for my USB connection though(I tried everything you said).My computer still keeps dropping USB connections intermittently...i miraculously managed to flash HSPL 3 on my HD2 just before the USB connection dropped.I was running WM 6.5 and android previously and i want to dual boot wp7 and android...which needs a USB connection(for MAGLDR and WP7)...Charging works fine via AC charger and via USB port(its just USB connection itself...any ideas where the fault lies?).i personally think the problem lies with my USB cable(as other devices work fine with the USB ports in my laptop). Guess i just have to buy a new micro usb cable(...thanks for your advice again.
Click to expand...
Click to collapse
Yeah buy a new cable and see if that helps. If the problem pursists then you probably have a problem with the pins in your micro USB port of your HD2 that are randomly loosing connection to the main board because the solder points for the USB port is become cracked, loose, or just seperating for some reason. You might can find a cell phone repair shop that can resolder the connections for you are just Chang the intierior main board out for you ifcthis is the problem.
My phone got a little liquid on it and after that it frozen so I did a soft reset and now my phone is freezing on android boot screen every time. The problem is what my MAGLDR is not working properly now too and my ClockworkMod Recovery is not working at all, so I don't know how to reinstall soft now. The MAGLDR is kind of flashing always and its hard to control as sometime its not reacting to my button push. And then I try to go into ClockworkMod Recovery its just starts loading, does that 1234 go and it freezes on it, every time. But besides all this stuff my phone looks like working fine, just looks like it just has some software damage. I think it should work with a new soft if not at least I can send it to my insurance as I will change a soft back to normal, because now my insurance will not fix my phone as it freezes on android boot screen so whey will see that I have android and not windows. Waiting for any good advice. Thank you
Btw. My original boot loader is not working too, I can't get in to it. I think its because of the android.
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
A.J said:
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
Click to expand...
Click to collapse
That's what I waned to do, but last time when I tried to connect it my computer couldn't find my phone. That's why I'm asked for a help here. I will try to connect it later today, after I come back from my work and I will post it here, if its connects or not
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Sw1pe said:
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Click to expand...
Click to collapse
'USB mass storage is working fine'
You may be able to flash a stock ROM from the SD card but I think it involves the bootloader. Have a look at This thread and see if it helps (I CBA to read it properly, sorry )
Thanks, but yes it involves the bootloader
Does Bootloader normally work if MAGLDR & ClockworkMod Recovery is installed on device?
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
A.J said:
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
Click to expand...
Click to collapse
Yeah that's a good point. If you can, trying PCs with different versions of Windows could help (i.e. XP, Vista, Windows 7 etc.)
Ok so I managed to connect my phone via USB Flasher on my work computer and I installed "[30.DEC.10][DFT]LEO "Stock Desire" NAND Android ROM" without any problems but my phone still stucks on DFT Boot screen. I also tried to reinstall MAGLDR and ClockworkMod Recovery to get Clockwork Recovery work but it didn't work, it didn't change anything. Does any one have any ideas what can I do next? Is it possible to install wm 6.5 via USB Flasher? As I know it needs bootloader Does any one have more ideas how to fix it?
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
A.J said:
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
Click to expand...
Click to collapse
I can't! Because wm 6.5 requires connection between bootloader or active sinc, there is not other way when instaling wm 6.5, and none of them work now on my device
take a look here, we have the same issue too... http://forum.xda-developers.com/showthread.php?t=899628&page=7