Hi,
anyone had such problem? Service visit required? It's unlikely I've pressed it too hard also never got wet.
Thanks for any advise.
Bartuzi
bartuzi said:
Hi,
anyone had such problem? Service visit required? It's unlikely I've pressed it too hard also never got wet.
Thanks for any advise.
Bartuzi
Click to expand...
Click to collapse
Someone has had this in the past, its a "send it back for repair" situation I think.
you can try using those sucker to suck the part out.... also try to pess the corners of the screen and this should be able to solve the problem.. the problem is the glass of the screen sticking onto the capacitator that detects our finger touch
detion
pressing helps but only for a sec, after letting go it comes bach, what about sucking out, any details how to do it?
You can try putting it in an airing cupboard for a few days, see if that'll dry it out, probrably better to go for the return option, least you know it'll get fixed properly.
thanks Guys, I'll try drying, if not service visit...
A friend of mine has the same problem, as some other guys too. There is also a thread - in German language - at 'PocketPC.ch' about this problem.
The dot sometimes even disappears! A few hours later it is back, really strange. He already send it to repair but it came back unrepaired. Maybe at that point of time it was not visible. After contacting the service once again asking if this could be a general hardware problem he was told "Yes it could be a general hardware problem of the HD2." And what is more HTC has some problems to get enough spare parts (display ?) for repair. Some users at 'PocketPC.ch' reported that their device has been for weeks (5 or 6 weeks) at the repair center because HTC could not deliver the spare parts.
Let's see how it goes on.
Best regards
These are very helping information, I'll try drying option than rather going to service which 20 km away via terrible jams
HTC HD2 screen problem
Hi,
I have had the same problem. Did you solved your problem, or have you learned anything about it?
Cheers,
Mehmet
bartuzi said:
Hi,
anyone had such problem? Service visit required? It's unlikely I've pressed it too hard also never got wet.
Thanks for any advise.
Bartuzi
Click to expand...
Click to collapse
Have a look at this thread....
http://forum.xda-developers.com/showthread.php?t=613631&highlight=screen+spot
It's been a problem for some people before and been fixed without sending their phone away. I think you need good suction
to johncmolyneux
suction you say I'd appriciate any details on that...
I've read the thread, coclusion is simple if it doesn't dissapear after max few days BY ITSELF, repair it! there are few lucky people who got it dissapear after suction, heating and so on... mine stays on the screen for few months now. Indeed after leaving it on a sunny day, the dot got signifficantly smaller.
hair dryer
hair dryer helps onlu for 30 minutes, maybe it should run for 12 or 24 hours?
Related
Hello to you all!
My problem began when I accidently dropped my Magician from a height of about 4 feet. Now it is having somekind of alignment problem. I cannot figure out the actual problem. No Matter where I click on the screen, it takes action on the extreme left side of the screen, for example if i click on the sound icon, it opens the start menu.
By any chance if anyone of you have experienced similar problem and got a solution, please be kind to share it with me. Experts I really need your help, in my country this thing cannot be repaired or replaced as no I-mate service is available. I'm on this forum with great hopes.
God Bless you all.
Please say something.!!
castiwo said:
Please say something.!!
Click to expand...
Click to collapse
Never heard of this before, but did you try a hard-reset ? seems to me that might be your only chance....
yess! hard resetted a couple of times now I cannot even pass through the screen alignment window that asks to tap on 5 different locations.
it definitely needs repair..you can try contacting www.expansys.com but you'll have to ship the item off to them for repair
Thank You O2Mini_Noob for your kind reply.
This Jam wasn't even bought from Expansys. But I'll still try asking them. In the mean time, can you people tell me if I can try repairing it myself? I'm quite familiar with the electronic devices.
I have had this same problem with an old ipaq 3760. Sometimes it would align after calibration but always went back to way off. After hard reset the only way to proceed was pressing the navigation button because the screen was so far off. I had acciedntally thrown it about 4 metres when it slid out of its case. It did not stop working then, but six months later I dropped it about 20cm on its edge and it went.
I took it in for repairs (I had paid an extra $200 for more waranty) and nobody could find the fault. In the end they told me it was repaired but the one I got back was new with a different serial number.
I do not think there is a solution to your problem. Once the screen goes its not worth fixing. I have a friend with a similar problem on a toshiba. It now registers a random screen tap every 2 -3 seconds making it uselless.
Sorry, I know its a really nice phone.
Expansys use PocketPCTechs as their PDA upgrade/repair centre which is the best repair centre for any PDAs. I guess to repair the O2 mini yourself, you must at least have a service manual. Try this link
http://www.ppcsg.com/index.php?showtopic=52417&hl=open+o2+mini
I got a serious problem with my mda vario here.
sometimes, 7 out of 10 times, when i get a call the screen gets totally corrupted and jumbled like on the picture in the attachment. i can only see black vertical lines on a white screen. in order to make the screen work properly i have to turn the phone off/on (stand-by mode) then.
does anybody know where the problem is?
i have to confess, that the phone slipped out of my hands and fell on the ground 3 times so far.
thanks
well, you say youve dropped it 3 times already? is it possible that something may be loose inside? is there cosmetic damages from dropping?
yes, there are some scratches on it. i don't really think that something is loose or broken, because the screen gets only on icoming calls corrupted.
so i don't think that it is due to a loose contact or something like that...
I have exactly the same problem. I personally think it is unlikely that dropping the phone has caused it as it corrects when you cycle the power button. Any help on this from other forum member would be much appreciated.
roads said:
I have exactly the same problem. I personally think it is unlikely that dropping the phone has caused it as it corrects when you cycle the power button. Any help on this from other forum member would be much appreciated.
Click to expand...
Click to collapse
Any resoluation this? I have the exact same problem!!
Oh dear ... somethings in the air...
mine's got it also. first time i saw it was a couple of days ago. only happens with the alarm clock in the morning :?
My phone is crap like hell... gotta hard reset and reconfig the damn thing. acting up lately...
(ps... AFAIK i barely dropped the phone... maybe 1 or 2 times. nothing more)
I have the same problem
I have read the service manual of wizard and said:
Unusual Vertical / Horizontal lines or partial display
(1) Check the connection of LCM FPC whether is properly connected. (Is a conector between motherboard and LCD)
(2) Try with another LCM. (LCM=LCD Screen)
(3) Try with another Main Board.
(4) Replace LCM if necessary
(5) Replace Main Board if necessary.
(6) Once the defective part has been identified, verify it again with the defective part whether the
symptom could be duplicated
Any sugestion?
Okay..
so far, i have installed Molski 2.26 rom (30meg free version) and upgrade the radio rom form 2.25 to 2.47.
I have not had another occurance of this so far.
Maybe a fluke.
Screen fixes when pressure applied to bottom of the screen
Guys,
I now have to keep my finger pressed hard against the bottom of the lcd unit to get the screen to display to work properly. it is under warranty with Imate but they want me to send it to Abu Dhabi for repair. I'm in Canada and concerned that I may not get it back.
So has anybody else identified this as being a loose connection rather that a real hard fault. Also has anybody fixed their unit by dismantling and reseating the connections.
Finally has anybody used the Imate repair service and was it timely & reliable?
Any advice would be appreciated.
Mick
This is a real hard fault.. had it with my mini s, took it into the shop, it was away 2 weeks... and in the end they gave me a replacement!!
I agree - took it completely apart and cleaned everything ....
And still have the issue.
Serves me right for buying something in Middlesbrough I suppose
It must be a hard fault with the LCD assembly. Will have to see how Dixons handles an overseas repair.
Take care & thx,
Mick
I had the same problem, in the end i took it into my local t-mob shop to have it repaired, they ended up sending me a new one.
Well, I've exactly the same problem since the past two-three weeks, it also occurs only in the morning. I'm living in the Netherlands and this is happening since it's rather cold over here, especially in the morning (3-4 degree Celcius). Since my bedroom window is open during the night, it gets rather cold in my room.
During the rest of the day it is +8 degree Celcius, and the phone works flawless. Maybe this problem has something to do with the Temperature?
Temperature
Bebob - don't thin so as I have had this problem for a number of months and the temp here in the summer is high (30+ degrees C)
It looks to be a bad connection type issue and may be a bad screen cable. It makes sense though that the issue is at the bottom of the screen cos this is where we press the select buttons all of the time.
Pls keep me posted on how you do. mine is going to a local repair shop (on my dime) tomorrow to see if they can fix it.
If not can any of you guys recomend a new unit that could be considered an upgrade to the KJAM ?
Many thanks
Mick
suggestions needed
friends, i have o2 mini s and got the same problem with screen for the last 3 weeks....
can anyone tell me that will the problem aggravate or else will i be able to use my cell properly for few months...
and also what will be the approx cost of repair..
all suggestions will be warmly appreciated...
It's happened to me as well. I have lived with that for one month now. It is happening, when I touch the cursor keys or when touch the lower part of the display. I tried "shaking/hitting" the xda and it looks better, so I assume it is a faulty connection cable.
I have active Cleartype and no more vertical lines for the past 2 days.
I seems to be a problem when background is white and leters are black.
Regards
similar problem
i dropped the phone (T-Mobile MDA Vario) and now when i turn it on the screen is fine for 5-30 seconds but then it scrambles, but works again if i smack the bottom of the phone on my hand!
t-mobile staff told me there are sensors to identify if it has been dropped. I'm suspicious that it could even be programmed to go "faulty" once it is dropped as the screen is fine for a limited time so it obviously works somewhat. do you know if this is the case? or what's happened? also is it a simple thing i could do myself? i didn't take out insurance so that's why i haven't just claimed off that as i'm really broke
Any help is appreciated
Regards,
Steve
whiteish screen / over temperature
hi,
I have a problem smilar at qtek 9100. I had upgade to my ppc wm5 to wm6 around 3 week ago and overclocked to 221 mhz with batery status today plug-in . 2 days ago Screen became whiteish (almost no contrast or over gamma) and working temperature is around 30c. I tried to re-flash with many kind roms but noting chaged.
Is there anybody has these kind of experice. If I can not solve. I am planing to buy new LCD ( I am not sure new LCD will solve the problem)
Thanks
Same problem here. Dropped it ONE time and the screen went crazy. Sent it to my t-mob shop and they got it repaired. They said in the report that they changed the "flex". Dunno if this helps.
Hi, going through the emails on this list was indeed very useful. I bought an iMate JASJAM in January 2007 and it started giving me a weird problem with the screen.
The phone was working perfectly OK till Mid Feb when I started noticing that any application I opened (including phone or contacts) got closed automatically within a second. I observed carefully and saw that the 'X' on the top left corner of the screen was probably getting clicked on its own. I suspected it is most probably a screen problem and took it to the iMate service center. They promptly replaced the screen in 2 days.
It worked fine for 15 days before I am seeing the problem again. Could someone help me please. I am seriously dependent on email through my phone for my work. Would appreciate any sort of guidance, even if it seems obvious.
My JASJAM is 647XX s/n based
Thanks a ton,
Aditya Deshoande
If indeed the X is getting phantom taps, this is not a screen problem as such. In other words, you could replace the screen time and again and it would recur. The issue is that the screen gets pressre/pressed by the bezel around the screen. The screen is rather stupidly sensitive to touches even below the bezel. Pressure can arise from a slight twist in bezel, from heat expansion and from dust trapped between bezel and screen. You might try the "business card solution" - though it is not guaranteed.
I would also take a backup and do a hard reset. Try the problem apps without restoring the backup. This will identify whether it's software or the SA related problem.
f the problem is still there, I would demand a replacement not a fix, because if something is out of line it's not going to be fixed by swapping screens.
Mike
Thank you
Mike,
Thank you for posting a reply so quickly. I suspected it is not just a screen alignment issue the moment it appeared again. None of the fixes mentioned for the SA issue work. I just wanted to check if anyone has any suggestions to try something. There are no applications installed by me and I have tried hard reset. In fact the crosshair in the align screen application keeps moving without me touching the screen.
The problem is that this problem makes the phone useless because I cannot open the dialer. We need to be extremely careful of what iMate and HTC seem to be shipping out. This is a damn expensive phone to have such problems.
I will request for a replacement but would not be surprised if I am refused and told that it will be repaired since it is warranty.
Let us see if I need to drag them to consumer forum. I will, if the need arises.
Regards
Adi
Good luck Adi - I hope it works out. Yes that jumping around of the cross hairs does prove there is pressure being put on somewhere. Indeed HTC did appear to have largely resolved the SA and SA related problems - but I'm still seeing quite a few.
Cheers
Mike
Heats up during charging
Hi Mike,
Perhaps the problem is compounded by the fact that it really heats up if you charge the phone while it is still in the cover. The one with a belt clip that comes in the box
My screen does not respond to any taps anymore. Which in a way is good because I am at least able to call as well as send/receive emails.
Regards
Adi
Same problem here!
So my Hermes, which just got replaced by Cingular after the "red light..not charging problem" (Thanks for the pointers on that Mike!). But my new unit is also having phantom clicks on the x or in landscape the Start menu kept getting clicks. And I too got the moving crosshairs during screen alignment setup. Now the whole screen is whacked, not repsonding to any clicks.
Cingular are sending out another unit. I love my hermes, but seriously getting worried about the reliability of these units. I really can;t be without my unti working for too long, I'm stcuk having to go back to my SE P900 (with a flaky battery) or my SE S700 which sux.
It is a worry and very frustrating. However, when you get a good one it is well worth it. A hassle I know, but some folks here say they've been through 3/4 before being happy. This is the secret I think, put up with no physical defect and get an immediate replacement. Use a cheap mobile while you wait for the replacement. Most of the 'pain' comes from trying this and that and the other to get the device working and perhaps 6 out of ten times you fail. Use the warranty without hesitation. There ARE good ones out there!
My thought for today!!
Mike
Hey Guys, Can anyone help ?
I plugged my phone in to charge overnight like normal and when i unplugged it next morning the screen will not respond to taps. There are no cracks or damage to the screen and it hasnt had a bump.
A hard reset gets me as far as the calibration screen but again, cant do it.
Does anyone either have any ideas or can anyone recommend a good repair place in the uk ??
thanks.
Andy
AndyG said:
Hey Guys, Can anyone help ?
I plugged my phone in to charge overnight like normal and when i unplugged it next morning the screen will not respond to taps. There are no cracks or damage to the screen and it hasnt had a bump.
A hard reset gets me as far as the calibration screen but again, cant do it.
Does anyone either have any ideas or can anyone recommend a good repair place in the uk ??
thanks.
Andy
Click to expand...
Click to collapse
Hi Andy,
If you are familiar with rom flashing you could try it before sending to repair in case it's software related.
Good luck
Arrrrrrggghhh-bloody backlight/touch bricked!
I have the same issue and it's driving me nuts!!
pressing the screen bottom left quite hard puts the backlight back on but it goes off as soon as I take my finger off.
Having done a web search, it appears that this may be a firmware issue, but if so, why, after 9 months of trouble free use, has it only just happened?
I'd be very interested if anyone else has solved this issue. Is there patch or is it a hardware issue?
My otherwise excellent touch is effectively bricked-any help or suggestions at all would be appreciated!
A fix (sort of)
I bit the bullet and ordered a replacement LCD module online and fitted it. It worked, proving that there was indeed an issue with the original. Problem is, the quality of the new one is really bad so DON'T buy a replacement online is my advice. I've now sent my beloved Touch back to HTC to get it fixed...
Hopefully I'll have it back and working soon.
FIXED !
i know this is gonna sound weird but i bought a BENQ_E72 while my touch wasnt working and i kinda forgot about the touch in the meantime. Yesterday i came back to the touch and lo and behold its working perfectly. Screen align is working, taps are going through and i cant see a problem.
Now i have read a thread about the Digitizer filling up with dust and yes my front case does have 2 hairline cracks in it so i am thinking a strip apart, new case and clean and go from there if it does it again. Odd how leaving it to discharge compleely for a couple of months has 'cured' the problem
Just thought i would share this with you
AndyG
After 4 months of flawless work, the lower part of the screen (a strip several millimeters from the edge) suddenly stopped responding properly!
E.g., all buttons in this area (including launcher/phone/+ on home screen) either don't work at all, or sometimes activate after a while when strongly pressed with the thumb (orientation doesn't matter).
Just two hours before they responded fine to the index finger.
Also, I've noticed that when I "multi-touch" the lower line in a file browser with two fingers, it works nice! Buttons are too small for that, however
I first tried to restore backup, but it didn't help, of course.
Has anybody had the same problem?? I guess it's a warranty case ...
I would agree, it's probably a hardware problem that you'll have to bring your phone in for service to get fixed.
I'm having that same problem my self, but just now and then. What helped with me is that I press the upper left corner of the phone with my other hand and then the lower part works fine, so i think i should get a new digitizer or its just loose connector.
im having the same problem , i have put up with it for the past few weeks and its driving me nuts now. today i did a factory reset which made no difference , i called htc who didnt sound a bit suprised by my phone call it gets picked up tomorrow morning to go for repair so the question is ... is this a common fault? and how the hell am i gonna cope without my hero in my pocket ?
Yeah happened to mine last week, a few have had the same issue where it's just the launcher bit not responding. Although the good news is that I'm getting it back tomorrow though so it's good times!
I had the same problem with my touchscreen (after a month or so!)
Mine got picked up thursday by HTC and I just checked the tracking site and they just recieved it.
I wonder how long it's going to take
Visited their service center last week.
They've immediately replaced my screen with a new one without any ado. Now everything works as before!
BUT a friend of mine who bought his Hero in January is having similar problems now...
It is a common problem according to HTC.
Mine was repaired in just 10 days.
Same problem here, did htc said anything about this problem? is it a common fault?
thank you
I said it in the post above yours.
ah yes, right, thank you
mach2005 said:
It is a common problem according to HTC.
Click to expand...
Click to collapse
If they acknowledge it officially, couldn't you provide a link please?
i gave mine last week to repair, they returned to me unfixed. on the paper stated that they only updated the software, what a dumb this htc guys. need to go back and tell them again the same story. im wasting my time only for this. wtf
I recently had this problem. The 3 buttons at the bottom of the screen wouldn't respond, took it into T-Mobile who said I'd have it back within about 7 to 10 days... 3 weeks later I got a text saying I could collect my phone...
On the paper sheet it says they've replaced the lens.. Which I can see they have as before I had a miniscule hairline scratch near the top.
They also mention a software update (1.0.0.A6288)
Either way it works nicely now.
I've recently experienced the same issue - the lower part of the screen, the one where the LauncherPro icons usually are stopped responding to touch. If I press really hard it works sometimes, but it's pretty annoying. I didn't sit on the phone or drop it recently, it just stopped working all of a sudden.
Is there anything I can do, as the phone is out of warranty ?
HTC South Africa gave me a new hero after I took mine in for the 3rd time. Hardware problem. Very happy with their service.
i have this exact same problem, is the only solution to send to htc? >_> Cuz my warranty's out already unfortunately... i flashed my hero to CyanogenMod 7 and it seems to have helped, but still not completely responsive... I also have a problem where at times i completely lose control of my touch screen where the spots i touch seem to respond to opposite sides of the screen... anyone else?
Remove battery, Remove sim card. put a dryer on the htc logo for about 40 mins. put the phone under a heavy object. Let it dry for about 15 mins and your fixed.
^ wtf do u mean?... are u just being a gimp...
VillainRocks said:
Remove battery, Remove sim card. put a dryer on the htc logo for about 40 mins. put the phone under a heavy object. Let it dry for about 15 mins and your fixed.
Click to expand...
Click to collapse
i am having the same problem and i badly need to solve it please could u tell me that what do you exactly mean by put a dryer on the htc logo
thanks