Related
Hey Guys, I just recently baught the T-mobile MDA and am looking for the OK/close button freeware mentioned in this review http://www.brighthand.com/default.asp?newsID=12194 Can anyone direct me to where I can find it?
This site is incredible but I'm having a hard time locating this program.
Sounds like they're talking about Smartskey It double duties the soft keys as start and ok/close+more.
Here's a dedicated thread for Smartskey which has download links for the app...
http://forum.xda-developers.com/viewtopic.php?t=41060
InClose Mobile is my Fav
http://insoftwarehouse.com/products/inclose/index.php?l=en
You guys rock! Thanks so much, I look forward to learning all kindsa cool shtuff on this forum.
SMClose is useful, and VJOkButt is my favourite.
V
I love "magic button" it's great and 100% freeware
vijay555 said:
SMClose is useful, and VJOkButt is my favourite.
V
Click to expand...
Click to collapse
I agree with vijay - use that combination small and sweet! No glitches at all
xdaradar said:
I love "magic button" it's great and 100% freeware
Click to expand...
Click to collapse
I installed Magic Buttons but do you have to start it manually? It doen't seem to work.
xdaradar said:
I installed Magic Buttons but do you have to start it manually? It doen't seem to work.
Click to expand...
Click to collapse
You have to install it in the main memory or in the storage memory and it should start on it's own (provided you have enabled the Auto Start option in its settings. If you install it in the storage card, you will probably need to start it manually.
Aveek
I use vbar
rsacipher said:
xdaradar said:
I love "magic button" it's great and 100% freeware
Click to expand...
Click to collapse
I installed Magic Buttons but do you have to start it manually? It doen't seem to work.
Click to expand...
Click to collapse
on my device it all happened automaticly. IF you tap&hold the X or OK in the left top corner of the screen you should see it getting active. tap&hold again ans magic button goes away
I still have not found the perfect task closer/manager. I have used several, but am still searching for the perfect application. The following are my criteria for the idea solution:
1.) Small. This is one of the only applications in main memory for speed/stability, so I want is small
2.) I want the WM5 icons. I like the square X and do not want any extraneous icons for settings (i.e. vbar). Essentially, I do not want to know the application is running.
3.) Task switcher. Ideally, i would tap and hold on the X to get a drop down with all the open apps that I can then switch to.
That is it, nothing extra. All the Wisbar derivatives (vbar, magic button) have extra icons for the settings. The two closest candidates for perfect closer/manager I have come across are wClose by Rui Goncalves and tMan by jasnapaka.com. wClose is only 8k :shock: and uses WM5 icons, but no task switcher. tMan has a great task switcher and is small, but uses a dot instead of WM5 icons. I am currently using wClose. My 2 cents.
I made it as simple as possible to change your prefered Calendar Manager, I use ThumbCal, which seems quite popular here. As downloaded, the script is setup for ThumbCal, but to change it all you have to do is edit the first 2 lines with a text editor.
Run the script and your Softkeys, links, and "Today Plugin" all call up Thumbcal, run again and it switches back to Office (Outlook) Mobile!
Does not support 3rd party software, for SPB Mobile Shell support see this thread.
MortScript is requied, download it here.
I hope you find this useful!
To use:
1. Download and unpack the ZIP file.
2. Edit the first 2 lines in the MSCR file, notepad works fine for this.
set AltCalendarName, "ThumbCal"
set AltCalendarPath, """\Program Files\ThumbApps\ThumbCal\ThumbCal.exe"""
3. Copy to your device, and make a shortcut.
4. Click the shortcut and answer the "Yes or No" question.
5. Repeat step 4 to swap between the two calendar managers!
NOTICE: I have seen this many of times, some softkey mapping software (most likely Spb Mobile Shell, this one does it the worst) hijacks the "calendar" softkey and redirects it to the "exe" instead of the "lnk". In any case this patch will still effect the Calendar Today Plug-in. You can remap your softkey with the mapping utility, how ever Spb Mobile Shell limits what you can select, so an additional one is recommended.
WOW..great thinking..
It has been asked abt Hundred of times to replace the Default Crappy Calender
Any screen shoot???
this is EXACTLY what i was looking for. thank you very much. if it doesn't take too much of your time and you can make one for changing the HTC Home Media Player to S2P instead of MP or HTC Audio Manager.. it would be fantastic.
THANK YOU
Just what I have been waiting for. There was nothing worse than having calendar items on the today screen, then pressing on them and it taking me to the default calendar, which I dont even use anymore. i had taken calendar off my today screen altogether. Now its back!!! thanks a bunch for this one.
Any news to get this feature on SPB mobile shell ?
change it easy guys.
as far as I know,I changed my calendar with the thumbcalc 0.51 simply with SK TOOLS.
There is a button change option.And many other offcours as well.But this is the easy way,without aknoledge of serious programming or programms..
helios
heliosismagic said:
as far as I know,I changed my calendar with the thumbcalc 0.51 simply with SK TOOLS.
There is a button change option.And many other offcours as well.But this is the easy way,without aknoledge of serious programming or programms..
helios
Click to expand...
Click to collapse
Hi!
Can u tell me which menu plz?
black_shadow69 said:
Any screen shoot???
Click to expand...
Click to collapse
No screens to shoot actually, its just a simple click "yes" or "no" dialog.
nir36 said:
this is EXACTLY what i was looking for. thank you very much. if it doesn't take too much of your time and you can make one for changing the HTC Home Media Player to S2P instead of MP or HTC Audio Manager.. it would be fantastic.
Click to expand...
Click to collapse
Dont use that program, but I will take a look just to see if its do-able.
flouk said:
Any news to get this feature on SPB mobile shell ?
Click to expand...
Click to collapse
Will be looking into that this week, looks complicated at the moment, but I think it will be possible.
is this not working for anyone else? :/
EDIT: NiteStalker, I checked my file paths, and everything is correct, when I press the .mscr file to toggle calendars, it tells me my default calendar has changed, but when I actually check my calendar "softkey" it has not changed.
Is there another script I could run to acheive the same effect?
UPDATE: I have also tried changing the File paths, and then changing the file location acoordingly with no result. I'm going to try to run it from the root, and see if it works.
UPDATE II: Launch off the root doesnt work, im going to check and see if the original Calendar is in the place referenced in the script for my device. (XV6900)
damnitryon said:
is this not working for anyone else? :/
EDIT: NiteStalker, I checked my file paths, and everything is correct, when I press the .mscr file to toggle calendars, it tells me my default calendar has changed, but when I actually check my calendar "softkey" it has not changed.
Is there another script I could run to acheive the same effect?
UPDATE: I have also tried changing the File paths, and then changing the file location acoordingly with no result. I'm going to try to run it from the root, and see if it works.
Click to expand...
Click to collapse
I run it from \Application Data\Mortscripts, but where its placed doesn't matter. When I run it my 'Softkey', 'Program Menu Link', and 'Today Screen Calendar Plug-in' all work. I'm using ThumbCal 0.51, but it shouldn't matter what app you run.
If the today plug-in works, but your softkey isn't, it's possible you have remapping software changing the default calendar link. If you have a softkey editor ensure it's pointed to the "calendar.lnk" in your start menu.
Also make sure you have 3 quotations (""") in front of and after the {set AltCalendarPath, """\Program Files\ThumbApps\ThumbCal\ThumbCal.exe"""}. If your missing even one, it will malfunction.
If none of this works, I don't know what to say, except that I run it on WM6.1, and my friend runs WM6.0, and it works on those.
I'm stumped, can anyone point me in the right direction?
EDIT: one sec. i posted at the same time as you. im reading.
damnitryon said:
I'm stumped, can anyone point me in the right direction?
EDIT: one sec. i posted at the same time as you. im reading.
Click to expand...
Click to collapse
Most important thing, did you download and install MortScript?
If need be, paste your edited lines so I can take a look.
NiteStalker said:
Most important thing, did you download and install MortScript?
If need be, paste your edited lines so I can take a look.
Click to expand...
Click to collapse
EDIT: Yes I have MortScript.
Well, I re-installed TouchCal and whent back to the original script, it works on the today plugin, but not the softkey, so, as you said somethiing is being remapped. How would I fix this?
damnitryon said:
EDIT: Yes I have MortScript.
Well, I re-installed TouchCal and whent back to the original script, it works on the today plugin, but not the softkey, so, as you said somethiing is being remapped. How would I fix this?
Click to expand...
Click to collapse
find your remapping software, "EZ Softkey" or "Mobile Shell 2" and remap to the "calendar.lnk" in the start menu.
NiteStalker said:
find your remapping software, "EZ Softkey" or "Mobile Shell 2" and remap to the "calendar.lnk" in the start menu.
Click to expand...
Click to collapse
How about a plot twist, I've never heard of either, and havent used any form of remapping software, should I just remap it to the correct place anyhow?
I may as well give it a shot.
UPDATE! I did it, when I looked at the mapping of the softkey it was going to "calendar.exe" instead of "calendar.lnk" so I just mapped it straight to touchCal for now, but now im curious and want to see if i can find the "calendar.lnk"
damnitryon said:
How about a plot twist, I've never heard of either, and havent used any form of remapping software, should I just remap it to the correct place anyhow?
I may as well give it a shot.
UPDATE! I did it, when I looked at the mapping of the softkey it was going to "calendar.exe" instead of "calendar.lnk" so I just mapped it straight to touchCal for now, but now im curious and want to see if i can find the "calendar.lnk"
Click to expand...
Click to collapse
Calendar.lnk is in [\windows\startmenu\programs] usually, it can move around there. Remapping to that would allow you to successfully swap between the apps if needed.
ANYWAY I am glad we were able to solve your problem.
NiteStalker said:
Calendar.lnk is in [\windows\startmenu\programs] usually, it can move around there. Remapping to that would allow you to successfully swap between the apps if needed.
ANYWAY I am glad we were able to solve your problem.
Click to expand...
Click to collapse
Yes, thank you for taking the time to help me out, I apreciate it. I also apologize for going off topic.
NiteStalker said:
find your remapping software, "EZ Softkey" or "Mobile Shell 2" and remap to the "calendar.lnk" in the start menu.
Click to expand...
Click to collapse
I am using "mobile shell 2" how do I remap it to "calendar.ink" so that thumbcal works please.
ozmale said:
I am using "mobile shell 2" how do I remap it to "calendar.ink" so that thumbcal works please.
Click to expand...
Click to collapse
settings> System> SPB Mobile Shell> Today Tab
Thats the path to your softkey remap in mobile shell
I could easily give some money if someone could make a program for making the bottom menu bar to hide and pressing like the big round bottom on phone would make it visible again. It would give alot more screen space for alot of programs, like writing sms etc.
It would be really great, I bet alot of people would like it to and also pay for it!
thanks
BarateaU said:
I could easily give some money if someone could make a program for making the bottom menu bar to hide and pressing like the big round bottom on phone would make it visible again. It would give alot more screen space for alot of programs, like writing sms etc.
It would be really great, I bet alot of people would like it to and also pay for it!
thanks
Click to expand...
Click to collapse
Here you are This is in polish, but program do exactly what you want - hide bottom bar in wm5, you can translate in google:
http://www.pdaclub.pl/index.php?option=com_files&Itemid=54&cid=38&fid=691&srv=2
And this is a file
TomekJ said:
Here you are This is in polish, but program do exactly what you want - hide bottom bar in wm5, you can translate in google:
http://www.pdaclub.pl/index.php?option=com_files&Itemid=54&cid=38&fid=691&srv=2
And this is a file
Click to expand...
Click to collapse
thanks, but i want it for wm 6.1q diamons default os, andbtouch flo
Is it only me that thinks its a good idea?
no your not alone
i found this topic because i had the same idea
ghostdweller said:
no your not alone
i found this topic because i had the same idea
Click to expand...
Click to collapse
Great
It would be really good removing it, having more screen space like opera when browsing it goes to fullscreen and pressing on the screen will make the bar's and menues apear again. Something like that would be great for the rest of the phone!
Ok ill give 200sek for the one that fixes this mod!
hiding top and bottom menus! And makes them appear when wanted!
Questions? ask!
you can do that with vjtoggletoday (www.vijay555.com) and a tool for setting registry keys (the guy who has written batterystatus has also written such a tool).
create a lnk file with the desired settings and map it to a key. that should do it. but you only have one key available to map (long end key)
I've seen that toggletoday thingy but i think its for wm5. I've tried installing it but nothing happend.
Thanks thou!
hi guys, I wanted to just remove the bottom bar like u guys and found this software from some site. Dont know where actually.. But it works on my Diamond.
It just removes the bottom bar.
Hope this helps.
lordaris said:
hi guys, I wanted to just remove the bottom bar like u guys and found this software from some site. Dont know where actually.. But it works on my Diamond.
It just removes the bottom bar.
Hope this helps.
Click to expand...
Click to collapse
Nothing happend with that cab. I did a soft reset but didnt help!
thanks anyway
same here
doesn't work with my touchflo
also tried a softreset
tried to install it with touchflo disabled
and when i enabled it ..... nothing
(also tried the softreset afterwards)
any sugestions ?
reg references ?
(maybe's there's is a way to just remove the black bar (as was done with the curtain remover) and leave the buttons intact ?
(that would be the next best thing for me)
I'd rather hide the menues completly. It would be really nice having a full screen phone. Now it looks more like a pda
BarateaU said:
I've seen that toggletoday thingy but i think its for wm5. I've tried installing it but nothing happend.
Thanks thou!
Click to expand...
Click to collapse
vjtoggletoday works also on wm6. make sure it is the alpha2 version.
you can use the attached zip file. put the autorun lnk file into your windows startup folder and configure this utility before soft-reset.
advantage of vjtoggletoday is, you can define how much of the bars' height should disappear.
another app is dcinobar which hides the bottom bar only
egoist6 said:
vjtoggletoday works also on wm6. make sure it is the alpha2 version.
you can use the attached zip file. put the autorun lnk file into your windows startup folder and configure this utility before soft-reset.
advantage of vjtoggletoday is, you can define how much of the bars' height should disappear.
another app is dcinobar which hides the buttom bar only
Click to expand...
Click to collapse
I dont know what that apps did to my diamond. Im not setting that on autorun! And the config file how are you suppose to config it? When neither of them starts?
by the way: both apps (i have attached dcinobar to my post above) only hide the bars on the today screen only. the bars do not disappear if you run an app.
if this would help you to some extend, i'll give you a step-by-step instruction for vjtoggle.
dcinobar is easier. just run the tool.
Have you tried them on a diamond? Cause the dcinobar did nothing on my diamond.
And the other program i think i will need a step by step guide
Thanks mate!
BarateaU said:
Have you tried them on a diamond? Cause the dcinobar did nothing on my diamond.
And the other program i think i will need a step by step guide
Thanks mate!
Click to expand...
Click to collapse
dcinobar works definitely on diamond. i am currently using it myself.
as said. both programs only hide the bar on today screen.
dcinobar: just copy the exe file to \windows\startup\. softreset. that's it.
vjtoggle:
copy the vjtoggletodayiialpha.exe to \Program Files\vijay555\
(if you keep the directoryname, you do not need to adjust the lnk files)
copy the vjtoggletodayAutorun.lnk to \Windows\StartUp\
copy the VJ Toggle Config.lnk to \Windows\StartMenu\Programs\
now run the config tool and set the values to 0. the config tool only sets the registry keys which are being used by the file in the startup folder.
alternatively you could do the settings yourself:
Code:
[HKEY_LOCAL_MACHINE\Software\Vijay555\VJTodayToggle]
"Enabled"=dword:00000001
"SoftKeySize"=dword:00000001
"StartSize"=dword:00000001
"TrayVisible"=dword:00000001
in this case the top and the bottom bar will have the size of 1px (just in case you still want to access them )
soft-reset.
if you do a soft-reset i would recommend to switch the phone off (long press on the button on the very top of your diamond).
if this is not working, you are definitely doing s.th. wrong as it works on my diamond.
post here if you need some more help.
vjtoggle:
copy the vjtoggletodayiialpha.exe to \Program Files\vijay555\
(if you keep the directoryname, you do not need to adjust the lnk files)
copy the vjtoggletodayAutorun.lnk to \Windows\StartUp\
copy the VJ Toggle Config.lnk to \Windows\StartMenu\Programs\
now run the config tool and set the values to 0. the config tool only sets the registry keys which are being used by the file in the startup folder.
alternatively you could do the settings yourself:
Click to expand...
Click to collapse
I did that, step by step. When i rebooted the htc, i didnt get a top menu at all and not just in today in all windows. And the bottom menu was still there.
And what happends if this will work. Will i get 2 black bars instead of 2 menues or will the screen auto adjust?
BarateaU said:
I did that, step by step. When i rebooted the htc, i didnt get a top menu at all ...
Click to expand...
Click to collapse
isn't that what you wanted to achieve (see post #7)
BarateaU said:
... And the bottom menu was still there...
Click to expand...
Click to collapse
please check the registry settings, if the key softkeysize = 0
also try to set trayvisible = 0
BarateaU said:
...And what happends if this will work. Will i get 2 black bars instead of 2 menues or will the screen auto adjust?
Click to expand...
Click to collapse
the space available for today screen will increase. the today screen is not stretched by the size you gained, you 'll have more space available.
did you try dcinobar?
I have adapted the HD 18 buttons Action Screen, with Wifi and Bluetooth status indicator, to the Rhodium bluetooth stack.
All credit goes to Wedge666 (thread here), to posters in his thread for customisation and of course to first Action Screen developper (I would quote him if I knew. Anyone knows? Or was it adapted from a HTC application?).
As in the original from Wedge666, you trigger with Manila Home tab right soft key, and you can configure program to make it running in background if you wish (quicker?). You have no confirmation message on shut down or reset.
You get advice about installation and basic customisation explanation in the HD thread.
Thierry
EDIT : on Roms with Action Screen already installed, it may be difficult to completely uninstall this version. And you need to apply the fix here.
Thanks thierry2064,
Will try it.
Greetings from Lille
You are welcome!
I attach here the version I use now, black and white except for the network status indicator, plain black background. Links to Pocket informant, Opera Mobile, Resco Explorer, Tomtom.. but this is easy to change, as explained in the HD thread. I may personalize it later (the favorite people button is a "heart" game card now).
Thierry
not showing up
i followed instructions for this by installing mortscript then .net.
nothing showed up on home tab.
the softkeys phone(L) and menu(R) still remain from rom .
im using HTCSense2.5 Landscape|Rhodium_AF|WM65 23529 by ark on my att tilt 2.
so by using total commander i see that it is intalled and the config icon is in start menu and folder in windows.
but how do i make a softkey for this or shortcut or something?
help?
Did you reset ? By the way if you had the cab in the third post (NC for no color), pease do not install, because I forgot some blutooth files... I will upload corrected version later.
help
i soft reset after every step.
action screen works, but i had to find link via total commander.
only action screen config had link in start up menu.
i copied paste action screen link to start up menu via total commander but link was not pretty and i dont know how to change its icon.
also, neither the left or right soft key changed after installation as mentioned in my previous post.
any help is much appreciated.
could it be the rom i am using?
i used the color actionscreen cab
If you feel like to change the registry (take care, if you do some wrong change you could have to hard reset), you can go to HKLM/Software/HTC/Manila
then change HomeRSKPath to \Windows\ActionScreen\LauchAction.exe and HomeRSKText to Action. Afetr reset you should see "Action" on the right low corner of the Home tab of Manila. If it does not work I do not know, maybe you shopuld ask on your Rom thread...
thanks
thanks for your advice.
doing regedit is alil beyond me bcuz i am new to this.
i still appreciate your effort.
Here is the version I use now. I added text, and warnings for Power Off and Reset. Customized to my needs, you have to see explanations in the HD thread to customize it to yours.
Here is a customization tutorial : http://www.techparaiso.com/customiz...how-to-assign-it-as-power-button-application/
I do not use Photoshop, the freeware Paint.net does the basic work. The icons could be nicer, if you make or find some nice icons, please share the background and the icons so that we can use it!
Can you please work on setting the action screen to the power button of TP2 instead? thank you for your great work...
bhloo said:
Can you please work on setting the action screen to the power button of TP2 instead? thank you for your great work...
Click to expand...
Click to collapse
Actually I configure the Home button to launch Action Screen, with this excellent application : http://forum.xda-developers.com/showthread.php?t=554240
You can do the same wih Power Button long press.
How do i unistall???? I tried and it wont let me?????
Than i get a permissions error?
charlieb620 said:
How do i unistall???? I tried and it wont let me?????
Than i get a permissions error?
Click to expand...
Click to collapse
Sorry about this, but I uninstalled a number of times with no problem, just with Settings / System /Remove Programs... Did you try a reset ?
Close HTCActionScreen.exe manually.
charlieb620 said:
How do i unistall???? I tried and it wont let me?????
Than i get a permissions error?
Click to expand...
Click to collapse
Hi charlieb620
You need to close the Action Screen process manually using a task manager like dotfred's or schap's. You're looking for HTCActionScreen.exe.
Cheers
andrew-in-woking
andrew-in-woking said:
Hi charlieb620
You need to close the Action Screen process manually using a task manager like dotfred's or schap's. You're looking for HTCActionScreen.exe.
Cheers
andrew-in-woking
Click to expand...
Click to collapse
did that it wont let me and when i try to overwrite it tells me i dont have proper permission.
thierry2064 said:
Sorry about this, but I uninstalled a number of times with no problem, just with Settings / System /Remove Programs... Did you try a reset ?
Click to expand...
Click to collapse
tried a reset and it wont let me uninstall
when i try to overwrite or uninstall i get this message. i dont want to hard reset but i think i might. cause now my phone freezes when i go to my action screen. and yes i have mortscript and sdk installed. i cant do anything. i get that message. when i kill process i go back to try to uninstall and will just stay there iin programs list
I am wondering if it is not a problem with another version of action screen installed on the Energy ROM. Can you see another one in "remove program" ? Maybe this 18 button action screen is not compatible with the Energy Rom (I have a stock Rom).
Rename the extension
charlieb620 said:
did that it wont let me and when i try to overwrite it tells me i dont have proper permission.
Click to expand...
Click to collapse
Hi charlieb620
Try using Total Commander to rename the extension of HTCActionScreen.exe to .ext or something like that. If it let's you, restart the device and you should be in business.
Cheers
andrew-in-woking
thierry2064 said:
I am wondering if it is not a problem with another version of action screen installed on the Energy ROM. Can you see another one in "remove program" ? Maybe this 18 button action screen is not compatible with the Energy Rom (I have a stock Rom).
Click to expand...
Click to collapse
Its The Only ActionScreen In The Programs List.
1. Can the sense UI be somehow positioned into landscape mode with a .cab?
2. How do you get into the registry? All visible is HKM? no HKLM files found anywhere...
3. How to search for specific threads under one phone on xda.
Knucklessg1 said:
1. Can the sense UI be somehow positioned into landscape mode with a .cab?
2. How do you get into the registry? All visible is HKM? no HKLM files found anywhere...
3. How to search for specific threads under one phone on xda.
Click to expand...
Click to collapse
1. Yes, use attached cab. It will rotate the display when you rotate the phone into portrait. I only know this to be working on the HD2.
2. What registry editor are you using?
3. Navigate to the forums for that model, and any of the subforums there that apply to your question, and then use the "search this forum" button in the top right, immediately above the list of threads.
Thanks ALOT, you dont know how much this helps, also i am using RESCO for registry, but i think i found a youtube video for that. Thanks alot, if i could award you something i would, (if there is, please do tell as well) (like a thumbs up, or +karma, or whatever this site may use if any)
sirphunkee said:
1. Yes, use attached cab. It will rotate the display when you rotate the phone into portrait. I only know this to be working on the HD2.
2. What registry editor are you using?
3. Navigate to the forums for that model, and any of the subforums there that apply to your question, and then use the "search this forum" button in the top right, immediately above the list of threads.
Click to expand...
Click to collapse
ok so for the landscape cab, do i need a soft reset, and would you happen to know if cookies home screen mod works with the hd2 landscape? also, how do i find this app in the start menu, when i soft reset my phone, nothing happened when i switched my phone to landscape, any ideas?
I'm afraid that I have no idea if this works or not alongside of co0kie's mod. A soft reset after running the cab should be all you needed to get the rotation working, there's no app to run (or icon for it) after that, it just runs in the background.
You can try one more soft-reset (I think mine took 2 to kick in), and I would also go into settings and calibrate your g-sensor if you haven't already.
Also...are you rotating it the right way into landscape? so that the hardware buttons end up to the right of the screen? This cab will only do the rotation in that direction, and back.
I'm afraid the only officially-sanctioned expressions of gratitude here are the ones issued by the treasury...but this small bit of assistance isn't even worth the time it would take, so your words do the job just fine Pay it forward (here at xda, if possible!)
FYI:
It does work with co0kie's mod but it replaces some of the menu items while in landscape. I can definitely live with that, thank you for the awesome app.
S_M_E said:
FYI:
It does work with co0kie's mod but it replaces some of the menu items while in landscape. I can definitely live with that, thank you for the awesome app.
Click to expand...
Click to collapse
You're very welcome, glad it's working for you
For anyone that hasn't seen that tweak before, you'll want to check out the thread I found it in, there's a bunch more very useful stuff in there:
http://forum.xda-developers.com/showthread.php?t=584415