I have adapted the HD 18 buttons Action Screen, with Wifi and Bluetooth status indicator, to the Rhodium bluetooth stack.
All credit goes to Wedge666 (thread here), to posters in his thread for customisation and of course to first Action Screen developper (I would quote him if I knew. Anyone knows? Or was it adapted from a HTC application?).
As in the original from Wedge666, you trigger with Manila Home tab right soft key, and you can configure program to make it running in background if you wish (quicker?). You have no confirmation message on shut down or reset.
You get advice about installation and basic customisation explanation in the HD thread.
Thierry
EDIT : on Roms with Action Screen already installed, it may be difficult to completely uninstall this version. And you need to apply the fix here.
Thanks thierry2064,
Will try it.
Greetings from Lille
You are welcome!
I attach here the version I use now, black and white except for the network status indicator, plain black background. Links to Pocket informant, Opera Mobile, Resco Explorer, Tomtom.. but this is easy to change, as explained in the HD thread. I may personalize it later (the favorite people button is a "heart" game card now).
Thierry
not showing up
i followed instructions for this by installing mortscript then .net.
nothing showed up on home tab.
the softkeys phone(L) and menu(R) still remain from rom .
im using HTCSense2.5 Landscape|Rhodium_AF|WM65 23529 by ark on my att tilt 2.
so by using total commander i see that it is intalled and the config icon is in start menu and folder in windows.
but how do i make a softkey for this or shortcut or something?
help?
Did you reset ? By the way if you had the cab in the third post (NC for no color), pease do not install, because I forgot some blutooth files... I will upload corrected version later.
help
i soft reset after every step.
action screen works, but i had to find link via total commander.
only action screen config had link in start up menu.
i copied paste action screen link to start up menu via total commander but link was not pretty and i dont know how to change its icon.
also, neither the left or right soft key changed after installation as mentioned in my previous post.
any help is much appreciated.
could it be the rom i am using?
i used the color actionscreen cab
If you feel like to change the registry (take care, if you do some wrong change you could have to hard reset), you can go to HKLM/Software/HTC/Manila
then change HomeRSKPath to \Windows\ActionScreen\LauchAction.exe and HomeRSKText to Action. Afetr reset you should see "Action" on the right low corner of the Home tab of Manila. If it does not work I do not know, maybe you shopuld ask on your Rom thread...
thanks
thanks for your advice.
doing regedit is alil beyond me bcuz i am new to this.
i still appreciate your effort.
Here is the version I use now. I added text, and warnings for Power Off and Reset. Customized to my needs, you have to see explanations in the HD thread to customize it to yours.
Here is a customization tutorial : http://www.techparaiso.com/customiz...how-to-assign-it-as-power-button-application/
I do not use Photoshop, the freeware Paint.net does the basic work. The icons could be nicer, if you make or find some nice icons, please share the background and the icons so that we can use it!
Can you please work on setting the action screen to the power button of TP2 instead? thank you for your great work...
bhloo said:
Can you please work on setting the action screen to the power button of TP2 instead? thank you for your great work...
Click to expand...
Click to collapse
Actually I configure the Home button to launch Action Screen, with this excellent application : http://forum.xda-developers.com/showthread.php?t=554240
You can do the same wih Power Button long press.
How do i unistall???? I tried and it wont let me?????
Than i get a permissions error?
charlieb620 said:
How do i unistall???? I tried and it wont let me?????
Than i get a permissions error?
Click to expand...
Click to collapse
Sorry about this, but I uninstalled a number of times with no problem, just with Settings / System /Remove Programs... Did you try a reset ?
Close HTCActionScreen.exe manually.
charlieb620 said:
How do i unistall???? I tried and it wont let me?????
Than i get a permissions error?
Click to expand...
Click to collapse
Hi charlieb620
You need to close the Action Screen process manually using a task manager like dotfred's or schap's. You're looking for HTCActionScreen.exe.
Cheers
andrew-in-woking
andrew-in-woking said:
Hi charlieb620
You need to close the Action Screen process manually using a task manager like dotfred's or schap's. You're looking for HTCActionScreen.exe.
Cheers
andrew-in-woking
Click to expand...
Click to collapse
did that it wont let me and when i try to overwrite it tells me i dont have proper permission.
thierry2064 said:
Sorry about this, but I uninstalled a number of times with no problem, just with Settings / System /Remove Programs... Did you try a reset ?
Click to expand...
Click to collapse
tried a reset and it wont let me uninstall
when i try to overwrite or uninstall i get this message. i dont want to hard reset but i think i might. cause now my phone freezes when i go to my action screen. and yes i have mortscript and sdk installed. i cant do anything. i get that message. when i kill process i go back to try to uninstall and will just stay there iin programs list
I am wondering if it is not a problem with another version of action screen installed on the Energy ROM. Can you see another one in "remove program" ? Maybe this 18 button action screen is not compatible with the Energy Rom (I have a stock Rom).
Rename the extension
charlieb620 said:
did that it wont let me and when i try to overwrite it tells me i dont have proper permission.
Click to expand...
Click to collapse
Hi charlieb620
Try using Total Commander to rename the extension of HTCActionScreen.exe to .ext or something like that. If it let's you, restart the device and you should be in business.
Cheers
andrew-in-woking
thierry2064 said:
I am wondering if it is not a problem with another version of action screen installed on the Energy ROM. Can you see another one in "remove program" ? Maybe this 18 button action screen is not compatible with the Energy Rom (I have a stock Rom).
Click to expand...
Click to collapse
Its The Only ActionScreen In The Programs List.
Related
I want to remove the battery8 icon and connection manager from the lower taskbar so did a search and came up with this thread
http://forum.xda-developers.com/viewtopic.php?t=46713&highlight=remove+system+tray
which pointed me to this wiki
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
"Remove Icons from the Taskbar
To Remove Battery:
HKLM\services\power\?ShowIcon === change from 1 to 0 (zero).
To Remove Screen Rotation:
HKLM\services\screenrotate\?ShowIcon === change from 1 to 0 (zero)
To Remove the Wireless connection manager
HKEY_LOCAL_MACHINE\Services\?WirelessMgr\keep and change the DWORD Keep to 0, soft-reset
If you remove all three icons, taskbar will be removed and more space on today screen."
So I use my trusty total commander, go to HKLM, go to the services directory but then don't see anything resembling ShowIcon or WirelessMgr. What am I missing here?
BTW, I have a Cing 8125 with Summitters 2.3 test2.
dcdivenut said:
I want to remove the battery8 icon and connection manager from the lower taskbar so did a search and came up with this thread
http://forum.xda-developers.com/viewtopic.php?t=46713&highlight=remove+system+tray
which pointed me to this wiki
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
"Remove Icons from the Taskbar
To Remove Battery:
HKLM\services\power\?ShowIcon === change from 1 to 0 (zero).
To Remove Screen Rotation:
HKLM\services\screenrotate\?ShowIcon === change from 1 to 0 (zero)
To Remove the Wireless connection manager
HKEY_LOCAL_MACHINE\Services\?WirelessMgr\keep and change the DWORD Keep to 0, soft-reset
If you remove all three icons, taskbar will be removed and more space on today screen."
So I use my trusty total commander, go to HKLM, go to the services directory but then don't see anything resembling ShowIcon or WirelessMgr. What am I missing here?
BTW, I have a Cing 8125 with Summitters 2.3 test2.
Click to expand...
Click to collapse
Those tweaks are for the universal not the wizard thats why you can't find the keys you want.
To remove the system tray just delete the init_tray.lnk from the windows\startup folder on your device and soft reset.
Mark, if I delete init_tray.lnk, will that let me use the space for the today screen instead, or is it still "reserved"?
Thanks
fuel925 said:
Mark, if I delete init_tray.lnk, will that let me use the space for the today screen instead, or is it still "reserved"?
Thanks
Click to expand...
Click to collapse
Yep will give you more space - make a copy of init_tray.lnk so you can put it back in the future if you need.
meschle said:
fuel925 said:
Mark, if I delete init_tray.lnk, will that let me use the space for the today screen instead, or is it still "reserved"?
Thanks
Click to expand...
Click to collapse
Yep will give you more space - make a copy of init_tray.lnk so you can put it back in the future if you need.
Click to expand...
Click to collapse
Oops, I didn't think to make a backup.. i'm sure someone will be able to provide it anyway should I need it in future.
I have a similar question along the same lines... pocket plus doesnt take up the whole today screen, is there a setting somewhere that i've missed, or maybe a regedit where you can specify the height of the today plugin?
Here is the backup file.
Sorry can't comment on pocket plus don't run that - me a much more basic kinda guy :wink:
Dudes, dudes! You have to try this:
http://www.htcwizardweb.net/node/703
It kicks some major ass!
Hope this helps!
meschle said:
dcdivenut said:
I want to remove the battery8 icon and connection manager from the lower taskbar so did a search and came up with this thread
http://forum.xda-developers.com/viewtopic.php?t=46713&highlight=remove+system+tray
which pointed me to this wiki
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
"Remove Icons from the Taskbar
To Remove Battery:
HKLM\services\power\?ShowIcon === change from 1 to 0 (zero).
To Remove Screen Rotation:
HKLM\services\screenrotate\?ShowIcon === change from 1 to 0 (zero)
To Remove the Wireless connection manager
HKEY_LOCAL_MACHINE\Services\?WirelessMgr\keep and change the DWORD Keep to 0, soft-reset
If you remove all three icons, taskbar will be removed and more space on today screen."
So I use my trusty total commander, go to HKLM, go to the services directory but then don't see anything resembling ShowIcon or WirelessMgr. What am I missing here?
BTW, I have a Cing 8125 with Summitters 2.3 test2.
Click to expand...
Click to collapse
Those tweaks are for the universal not the wizard thats why you can't find the keys you want.
To remove the system tray just delete the init_tray.lnk from the windows\startup folder on your device and soft reset.
Click to expand...
Click to collapse
Thanks... I knew it was something boneheaded...
Yom - is that my app, VJToggleToday?
V
vijay555 said:
Yom - is that my app, VJToggleToday?
V
Click to expand...
Click to collapse
Yep. I found it at the specified HTC Wizard Web link.
Should I not have posted the link to it?
dcdivenut said:
I want to remove the battery8 icon and connection manager from the lower taskbar
Click to expand...
Click to collapse
Hi
as already told, you can remove Init_tray.lnk from startup. but be aware - this will make slight problems with software, which places icon in tray (CardExport, Pocket GPS Pro etc).
in addition you could gain more place by eliminating lower bar (with contacts and calender). they will be still accesible through soft-buttons, but will not take place on today screen.
i prefer dciNoBar
http://www.google.ru/search?hl=ru&q=dcinobar&lr=
(sorry, some links are in russian, but i think you will have no problems with finding download link).
if you like the result - you may add this program to startup folder so it will restart automatically after softreset.
BR!
Turist said:
dcdivenut said:
I want to remove the battery8 icon and connection manager from the lower taskbar
Click to expand...
Click to collapse
Hi
as already told, you can remove Init_tray.lnk from startup. but be aware - this will make slight problems with software, which places icon in tray (CardExport, Pocket GPS Pro etc).
in addition you could gain more place by eliminating lower bar (with contacts and calender). they will be still accesible through soft-buttons, but will not take place on today screen.
i prefer dciNoBar
http://www.google.ru/search?hl=ru&q=dcinobar&lr=
(sorry, some links are in russian, but i think you will have no problems with finding download link).
if you like the result - you may add this program to startup folder so it will restart automatically after softreset.
BR!
Click to expand...
Click to collapse
Thanks for that - useful small program - For those who find russian daunting - program attached
EDIT cab file now posted for autoinstallation - copy to device, click on cab, install to device and soft reset.
meschle said:
Thanks for that - useful small program - shame the space gained cannot be used and is just visual. I am sure that could be sorted - i will ask around. For those who find russian daunting - program attached
Click to expand...
Click to collapse
Hi. You are somehow wrong. this place is fully usable
If you tell me how can i make screenshot i will show what it looks like.
May be you are using some today plugin which height needs to be manually adjusted? in my case this is Spb +
Turist said:
meschle said:
Thanks for that - useful small program - shame the space gained cannot be used and is just visual. I am sure that could be sorted - i will ask around. For those who find russian daunting - program attached
Click to expand...
Click to collapse
Hi. You are somehow wrong. this place is fully usable
If you tell me how can i make screenshot i will show what it looks like.
May be you are using some today plugin which height needs to be manually adjusted? in my case this is Spb +
Click to expand...
Click to collapse
Thats cool then if its possible - probably because i still have phm traylaunch and it stays where it normally is and i want it right at the bottom.
To take a screen capture use xnview download here http://forum.xda-developers.com/download.php?id=12698
its under tools\capture - i would be interested to see what setup you have and i will fiddle with mine a bit more - thanks
EDIT fiddled with it and yes - it works!!!! phm traylaunch is right at the bottom now. Nice one mate - cheers! Now I need some new themes - normal ones are not long enough.
EDIT2 can't get traylaunch to stay at the bottom - trying to sort out a workaround!
EDIT3 found a fix to keep phm traylaunch at bottom after softreset - open and shut keyboard and it moves to the bottom - GREAT!! v.v. grateful been looking for something like this for a while!
good prog
thx
meschle said:
To take a screen capture use xnview download here http://forum.xda-developers.com/download.php?id=12698
Click to expand...
Click to collapse
thanks, it worked. but if you could give me a tip, where i can get app for screen-capturing only with hot-key support i`d really appreciate it
EDIT3 found a fix to keep phm traylaunch at bottom after softreset - open and shut keyboard and it moves to the bottom - GREAT!! v.v. grateful been looking for something like this for a while!
Click to expand...
Click to collapse
than you may be interested in newer version 0.0.2 (i think you have 0.0.1). it can toggle lower bar if launched again.
BR!
Turist said:
meschle said:
To take a screen capture use xnview download here http://forum.xda-developers.com/download.php?id=12698
Click to expand...
Click to collapse
thanks, it worked. but if you could give me a tip, where i can get app for screen-capturing only with hot-key support i`d really appreciate it
EDIT3 found a fix to keep phm traylaunch at bottom after softreset - open and shut keyboard and it moves to the bottom - GREAT!! v.v. grateful been looking for something like this for a while!
Click to expand...
Click to collapse
than you may be interested in newer version 0.0.2 (i think you have 0.0.1). it can toggle lower bar if launched again.
BR!
Click to expand...
Click to collapse
Thanks for the updated file.
Find enclosed a screen capture program - you can assign to a hard key.
through settings\buttons
Its only drawback is that it saves in bmp format
EDIT version 0.02 does not seem to work so well - on my device - the soft keys often don't seem to work, i only got them to work once - I go back to the other version.
No soft key buttons
I have put dcinobar into a cab for easier installation.
Copy cab onto device, click on cab, install to device and then soft reset.
VJToggleToday
For those using dcinobar - I have tried Vjtoggletoday and would have to say it works better. You can remove soft keys only, soft keys and start bar or startbar only - have it just the way you like it. Does not have the glitch dcinobar has where you need to open and shut the keyboard
see here http://forum.xda-developers.com/viewtopic.php?t=27331
download here http://www.vijay555.com/vj/releases/vjtoggletodayii/vjtoggletodayiialpha.exe
Thanks vijay!
Re: VJToggleToday
meschle said:
For those using dcinobar - I have tried Vjtoggletoday and would have to say it works better. You can remove soft keys only, soft keys and start bar or startbar only - have it just the way you like it. Does not have the glitch dcinobar has where you need to open and shut the keyboard
Thanks vijay!
Click to expand...
Click to collapse
Hi!
i have no glitch with keyb indicator. maybe it depends on keyboard being used? i`ve tried VJs app and i dont like the way how start bar romoval is done. i`ll wait for next release and keep using dcinobar meanwhile
hey guys i just stumbled into a nice new(launched 1-1-08) program called Pointui it's a skin program for wm5 & wm6 phones. i am running it right now on my wing and i love the damn thing. but don't take my word for it check out what JASON CHEN from Gismondo had to say about it :http://gizmodo.com/339835/pointui-sk...?autoplay=true . btw guys i am in now way whatsoever affiliated to whoever made the program, i've learned so many things about my wing from this site that i just wanted to give everyone a heads up. again the program it totally free with absolutley no hoops to jump through.
btw the program has to be installed through activesync ( just so u know) also the link to the website it at the bottom of the review.
please only one thread for one and the same thing....
http://forum.xda-developers.com/showthread.php?t=356177
papamopps said:
please only one thread for one and the same thing....
http://forum.xda-developers.com/showthread.php?t=356177
Click to expand...
Click to collapse
yeah i know sorry i thought i was posting it here but for some reason i posted it under accessories, i just wanna get the word out. i know alot of ppl will like it.
Is it Skinnable?
Can we change the skin?
That Blue is really boring to me...
Great program, i'll test it soom...
So I decided to play around with this for a minute to see how well it works....I'm pretty bored at work. Anyway, i installed pontui home and it works pretty nice. I also installed OTO on touch task and calandar program. Once i did this on my bottom bar where i have my contacts and calandar, the calandar button now says HOME but still activates the calandar. I removed and deleted both programs to see if i could figure it out and it continues to say HOME. I did a soft reset and still nothing. Any ideas?
correction..... The home button actually prompts pontui to start and once activated, if you press the button again it prompts the calander. I want my calander button to prompt the calandar not the program. anyone with experience?
after installing pointui.
hkcu\software\microsoft\today\keys\112
default = calandar
open = \windows\calandar.exe
but then you have to choose point.ui somewhere else on a button or put a link into
\windows\startup
btw - after editing the key -powercycle (3 sec push power and say yes)
mrmikemcguire said:
So I decided to play around with this for a minute to see how well it works....I'm pretty bored at work. Anyway, i installed pontui home and it works pretty nice. I also installed OTO on touch task and calandar program. Once i did this on my bottom bar where i have my contacts and calandar, the calandar button now says HOME but still activates the calandar. I removed and deleted both programs to see if i could figure it out and it continues to say HOME. I did a soft reset and still nothing. Any ideas?
correction..... The home button actually prompts pontui to start and once activated, if you press the button again it prompts the calander. I want my calander button to prompt the calandar not the program. anyone with experience?
Click to expand...
Click to collapse
papamopps said:
after installing pointui.
hkcu\software\microsoft\today\keys\112
default = calandar
open = \windows\calandar.exe
but then you have to choose point.ui somewhere else on a button or put a link into
\windows\startup
btw - after editing the key -powercycle (3 sec push power and say yes)
Click to expand...
Click to collapse
Thank you! much appreciated. I actually figured it out and was comming back to edit my post. But again, thank you for your prompt response!
http://forum.xda-developers.com/showthread.php?t=355961
have a look here
I didn't know this was available yet! How much RAM does it eat?
hidavi said:
I didn't know this was available yet! How much RAM does it eat?
Click to expand...
Click to collapse
don´t know- some told about 13mb - but i cannot belive it. isntall - try and report
hehe
Doesn't surprise me. I mean, look how slick that looks?
it uses about 4mb
hidavi said:
I didn't know this was available yet! How much RAM does it eat?
Click to expand...
Click to collapse
i'm running the stock t-mo ruu without the t-mo customizations
and after 5 reboots (to make sure ram use is consistent) i show 4 megs of use (from 16mb down to 12mb) the program works very well but there is room for improvement, ie you cannot shutdown programs only minimize them. one thing i really like is that the weather feature works fine with the 5.99 proxy, there is no need to set it up, it works right off the bat. i suggest you give it a try.
You CAN shut them down, when app is opened, just press the top bar,
there you can choose Force Close, only counterpart is that .Home
goes back to your normal Today-Screen
In thier forum they have a link to download a modified .exe for the app that closes applications instead of minimizing them. Them forum link is here
Im just curious, but how do you manually install a dialer skin? I have found alot of dialer skins for the mogul that are really cool, but they are not in .Cab format. I'm not exactly sure how to manually install one. Could someone please give me some info. Thanks a ton in advance.
Chem
Chemdawg said:
Im just curious, but how do you manually install a dialer skin? I have found alot of dialer skins for the mogul that are really cool, but they are not in .Cab format. I'm not exactly sure how to manually install one. Could someone please give me some info. Thanks a ton in advance.
Chem
Click to expand...
Click to collapse
what i do is install the big button dialer for the mogul and then the touch dialer skin cab on to the main memory to skin my phone with the default skin.
From there in the root there is a folder that says Phone Skin.
Now from here I can either photoshop the skin available or replace it with others that I find else where.
So once I install this big button dialer, there shoudl be a folder in the root directory that I can install the other skins?
Chemdawg said:
So once I install this big button dialer, there shoudl be a folder in the root directory that I can install the other skins?
Click to expand...
Click to collapse
If you install the big button dialer cab for the mogul. It will replace the dialer skins that are on the phone already but it wont have the Vouge buttons.
If you want to still use the Vogue type of buttons install the Touch skin cab to go with it and once you do this will place a folder in the root : not \Windows, where you can customize, delete and replace for others that you might like. I found out by experimenting and it worked for me.
I will hunt these two skins down, and start experimenting myself.
Chemdawg said:
I will hunt these two skins down, and start experimenting myself.
Click to expand...
Click to collapse
If you want i can send you the Big Button Dialer CAB, and the Touch Skin CAB that way you can start skinning from here.
Just PM and i'll send it to you or I'll upload it later because I dont have it with me at the moment (School)
Her is the Big Button Dialer cab along with the Touch Skin Cab for those that need it.
Install the Big Button Dialer cab first then the Touch. After your done soft reset your phone. This should work on all TITAN phones. It says mogul but it works on my XV6800.
Skin problems...
Okay, I've installed the Big Button thing, and then the touch skin, but when I restarted, all of the buttons are fine, except for the 1 button, which appears as the native Mogul dialer button for 1, which looks distinctly out of place. Functions fine, just looks ugly, any fix for this?
HKCU\ControlPanel\PhoneExtendFunction\CDMA, Set EnableVoicemailIcon = 0 then soft reset.
Camalama said:
HKCU\ControlPanel\PhoneExtendFunction\CDMA, Set EnableVoicemailIcon = 0 then soft reset.
Click to expand...
Click to collapse
Erm, sorry, not quite advanced enough to grasp that. Is that a folder\file thing or a registry thing, if it's a registry thing, where do I edit the phone's registry?
Edit: Nevermind, remembered that HKCU is a registry path, the rest is now obvious, just need to find a registry editor.
Edit 2: Found a registry editor, problem now occurs that "Access is denied" when I try and edit that particular registry entry.
Lilinka said:
Erm, sorry, not quite advanced enough to grasp that. Is that a folder\file thing or a registry thing, if it's a registry thing, where do I edit the phone's registry?
Edit: Nevermind, remembered that HKCU is a registry path, the rest is now obvious, just need to find a registry editor.
Edit 2: Found a registry editor, problem now occurs that "Access is denied" when I try and edit that particular registry entry.
Click to expand...
Click to collapse
Here is another registry editor if the one you have doesnt work.
Thanks! Worked wonders.
[email protected]$ said:
what i do is install the big button dialer for the mogul and then the touch dialer skin cab on to the main memory to skin my phone with the default skin.
From there in the root there is a folder that says Phone Skin.
Now from here I can either photoshop the skin available or replace it with others that I find else where.
Click to expand...
Click to collapse
Hey can you post some of these?
"Now from here I can either photoshop the skin available or replace it with others that I find else where."
or explain a little bit how to photoshop them? I am familiar with photoshop so I dont need a walk thru, but there are 26 graphic files in the PhoneSkin directory. Which to edit?
Also, I followed these instructions and your downloads, but when I push a button, the whole button turns white. really all I am looking to do is have it turn the matching blue when I press a key (the same blue that's in the dialer window by default)
thanks.
goon55 said:
Hey can you post some of these?
"Now from here I can either photoshop the skin available or replace it with others that I find else where."
or explain a little bit how to photoshop them? I am familiar with photoshop so I dont need a walk thru, but there are 26 graphic files in the PhoneSkin directory. Which to edit?
Also, I followed these instructions and your downloads, but when I push a button, the whole button turns white. really all I am looking to do is have it turn the matching blue when I press a key (the same blue that's in the dialer window by default)
thanks.
Click to expand...
Click to collapse
sorry for not being clear on my post. there is a program called tdial designer by tiermann ( search for it) and this will help you creat your own skinable dialer.
this will even fix the issue when you press a button and have receive a white button display. just chose your dialer carefully. i recommend the bluefrog aka new vouge dialer.
the regurlar vouge dialer will impair some functions on your phone. once you create the skin, it will generate the picture files and a cab for you to install.
the reason why i mentioned photoshop is that i add more details onto my dialer skins and modify them more ' to look unique ' or to stand out.
hope this is what you needed.
Oh no need to apologize, your posts are great.
I do have the Tdial Designer v1.1.0
I have the BlueFrog Big Button Dialer installed
I open the Tdial Designer (TDD) and from the Options > Dialer I choose "BlueFrog (or new Touch)". Everything looks great until I click on w=one of the buttons, then the same issue arises, it just whites out the whole key. The options below the "Down:" options are no longer available. If I switch back to Options > Dialer I choose "HTC Vouge (or old Touch)", then the "Down:" options are available. I hope this makes sense.
I did try to save a few that I was testing. Looks like it outputs the files and a cab file. Am I better off just copying the files into the PhoneSkin directory or running the actual cab?
Thanks again for the help
best regeditor in my op!
http://ceregeditor.mdsoft.pl/
but its editing through the PC and not the PPC so you cannot do on the fly editing... but I love the full 22" screen editing of my Mogul's registry
goon55 said:
Oh no need to apologize, your posts are great.
I do have the Tdial Designer v1.1.0
I have the BlueFrog Big Button Dialer installed
I open the Tdial Designer (TDD) and from the Options > Dialer I choose "BlueFrog (or new Touch)". Everything looks great until I click on w=one of the buttons, then the same issue arises, it just whites out the whole key. The options below the "Down:" options are no longer available. If I switch back to Options > Dialer I choose "HTC Vouge (or old Touch)", then the "Down:" options are available. I hope this makes sense.
I did try to save a few that I was testing. Looks like it outputs the files and a cab file. Am I better off just copying the files into the PhoneSkin directory or running the actual cab?
Thanks again for the help
Click to expand...
Click to collapse
I recommend using the CAB. Because the image files only displays the dialer in standalone more ( not in use ) but the CAB once designed properly will show a customized dialer that includes the smart dialer color customization, and even the buttons when they are pressed.
I will load up a picture of how one of my alien-reanimation themed dialer looks, along with the cab if you want to install it.
thanks for sending that it is very cool. The issue I am having now is that when I install the cab it is not over riding the default one. do I need to uninstall the blue frog dialer? when I install your cab, the default dialer comes up and not yours. I look in the remove applications and what I believe is yours is listed as MyPhoneSkin. I just cant seem to get the new themes, yours or mine to apply to the phone.
goon55 said:
thanks for sending that it is very cool. The issue I am having now is that when I install the cab it is not over riding the default one. do I need to uninstall the blue frog dialer? when I install your cab, the default dialer comes up and not yours. I look in the remove applications and what I believe is yours is listed as MyPhoneSkin. I just cant seem to get the new themes, yours or mine to apply to the phone.
Click to expand...
Click to collapse
No worries. I just need some information from you first.
Do you have a stock ROM on your phone or a Custom one (for example a DCD ROM)
(uninstall all previous custom dialers you have installed; Then )
If you have a DCD ROM then all you would have to do is install my cab or yours and soft reset ( reboot ) and the new dialer should show up now.
If you have a stock ROM you would first have to install the Mogul Big Button Dialer CAB ( dont worry it a universal CAB for all 6800's ) that I will provide -- Soft reset and see if you notice a new dialer ( you might get a dialer with no dial pad, this is normal) from here install your own custom CAB that you have made or mine and soft reset to notice the change.
hey cool deal, OK I got it working. I have dcd 2.3.2 rom. I reinstalled the mogul dialer, then yours and it worked. However, when I push the buttons, the blue highlight comes on, but it is the whole key, I cannot see the number below it. Which I guess isn't an issue cause you cant see it when my finger is pushing it anyway! but I wanna make sure that this is acting properly. thanks again
I made it as simple as possible to change your prefered Calendar Manager, I use ThumbCal, which seems quite popular here. As downloaded, the script is setup for ThumbCal, but to change it all you have to do is edit the first 2 lines with a text editor.
Run the script and your Softkeys, links, and "Today Plugin" all call up Thumbcal, run again and it switches back to Office (Outlook) Mobile!
Does not support 3rd party software, for SPB Mobile Shell support see this thread.
MortScript is requied, download it here.
I hope you find this useful!
To use:
1. Download and unpack the ZIP file.
2. Edit the first 2 lines in the MSCR file, notepad works fine for this.
set AltCalendarName, "ThumbCal"
set AltCalendarPath, """\Program Files\ThumbApps\ThumbCal\ThumbCal.exe"""
3. Copy to your device, and make a shortcut.
4. Click the shortcut and answer the "Yes or No" question.
5. Repeat step 4 to swap between the two calendar managers!
NOTICE: I have seen this many of times, some softkey mapping software (most likely Spb Mobile Shell, this one does it the worst) hijacks the "calendar" softkey and redirects it to the "exe" instead of the "lnk". In any case this patch will still effect the Calendar Today Plug-in. You can remap your softkey with the mapping utility, how ever Spb Mobile Shell limits what you can select, so an additional one is recommended.
WOW..great thinking..
It has been asked abt Hundred of times to replace the Default Crappy Calender
Any screen shoot???
this is EXACTLY what i was looking for. thank you very much. if it doesn't take too much of your time and you can make one for changing the HTC Home Media Player to S2P instead of MP or HTC Audio Manager.. it would be fantastic.
THANK YOU
Just what I have been waiting for. There was nothing worse than having calendar items on the today screen, then pressing on them and it taking me to the default calendar, which I dont even use anymore. i had taken calendar off my today screen altogether. Now its back!!! thanks a bunch for this one.
Any news to get this feature on SPB mobile shell ?
change it easy guys.
as far as I know,I changed my calendar with the thumbcalc 0.51 simply with SK TOOLS.
There is a button change option.And many other offcours as well.But this is the easy way,without aknoledge of serious programming or programms..
helios
heliosismagic said:
as far as I know,I changed my calendar with the thumbcalc 0.51 simply with SK TOOLS.
There is a button change option.And many other offcours as well.But this is the easy way,without aknoledge of serious programming or programms..
helios
Click to expand...
Click to collapse
Hi!
Can u tell me which menu plz?
black_shadow69 said:
Any screen shoot???
Click to expand...
Click to collapse
No screens to shoot actually, its just a simple click "yes" or "no" dialog.
nir36 said:
this is EXACTLY what i was looking for. thank you very much. if it doesn't take too much of your time and you can make one for changing the HTC Home Media Player to S2P instead of MP or HTC Audio Manager.. it would be fantastic.
Click to expand...
Click to collapse
Dont use that program, but I will take a look just to see if its do-able.
flouk said:
Any news to get this feature on SPB mobile shell ?
Click to expand...
Click to collapse
Will be looking into that this week, looks complicated at the moment, but I think it will be possible.
is this not working for anyone else? :/
EDIT: NiteStalker, I checked my file paths, and everything is correct, when I press the .mscr file to toggle calendars, it tells me my default calendar has changed, but when I actually check my calendar "softkey" it has not changed.
Is there another script I could run to acheive the same effect?
UPDATE: I have also tried changing the File paths, and then changing the file location acoordingly with no result. I'm going to try to run it from the root, and see if it works.
UPDATE II: Launch off the root doesnt work, im going to check and see if the original Calendar is in the place referenced in the script for my device. (XV6900)
damnitryon said:
is this not working for anyone else? :/
EDIT: NiteStalker, I checked my file paths, and everything is correct, when I press the .mscr file to toggle calendars, it tells me my default calendar has changed, but when I actually check my calendar "softkey" it has not changed.
Is there another script I could run to acheive the same effect?
UPDATE: I have also tried changing the File paths, and then changing the file location acoordingly with no result. I'm going to try to run it from the root, and see if it works.
Click to expand...
Click to collapse
I run it from \Application Data\Mortscripts, but where its placed doesn't matter. When I run it my 'Softkey', 'Program Menu Link', and 'Today Screen Calendar Plug-in' all work. I'm using ThumbCal 0.51, but it shouldn't matter what app you run.
If the today plug-in works, but your softkey isn't, it's possible you have remapping software changing the default calendar link. If you have a softkey editor ensure it's pointed to the "calendar.lnk" in your start menu.
Also make sure you have 3 quotations (""") in front of and after the {set AltCalendarPath, """\Program Files\ThumbApps\ThumbCal\ThumbCal.exe"""}. If your missing even one, it will malfunction.
If none of this works, I don't know what to say, except that I run it on WM6.1, and my friend runs WM6.0, and it works on those.
I'm stumped, can anyone point me in the right direction?
EDIT: one sec. i posted at the same time as you. im reading.
damnitryon said:
I'm stumped, can anyone point me in the right direction?
EDIT: one sec. i posted at the same time as you. im reading.
Click to expand...
Click to collapse
Most important thing, did you download and install MortScript?
If need be, paste your edited lines so I can take a look.
NiteStalker said:
Most important thing, did you download and install MortScript?
If need be, paste your edited lines so I can take a look.
Click to expand...
Click to collapse
EDIT: Yes I have MortScript.
Well, I re-installed TouchCal and whent back to the original script, it works on the today plugin, but not the softkey, so, as you said somethiing is being remapped. How would I fix this?
damnitryon said:
EDIT: Yes I have MortScript.
Well, I re-installed TouchCal and whent back to the original script, it works on the today plugin, but not the softkey, so, as you said somethiing is being remapped. How would I fix this?
Click to expand...
Click to collapse
find your remapping software, "EZ Softkey" or "Mobile Shell 2" and remap to the "calendar.lnk" in the start menu.
NiteStalker said:
find your remapping software, "EZ Softkey" or "Mobile Shell 2" and remap to the "calendar.lnk" in the start menu.
Click to expand...
Click to collapse
How about a plot twist, I've never heard of either, and havent used any form of remapping software, should I just remap it to the correct place anyhow?
I may as well give it a shot.
UPDATE! I did it, when I looked at the mapping of the softkey it was going to "calendar.exe" instead of "calendar.lnk" so I just mapped it straight to touchCal for now, but now im curious and want to see if i can find the "calendar.lnk"
damnitryon said:
How about a plot twist, I've never heard of either, and havent used any form of remapping software, should I just remap it to the correct place anyhow?
I may as well give it a shot.
UPDATE! I did it, when I looked at the mapping of the softkey it was going to "calendar.exe" instead of "calendar.lnk" so I just mapped it straight to touchCal for now, but now im curious and want to see if i can find the "calendar.lnk"
Click to expand...
Click to collapse
Calendar.lnk is in [\windows\startmenu\programs] usually, it can move around there. Remapping to that would allow you to successfully swap between the apps if needed.
ANYWAY I am glad we were able to solve your problem.
NiteStalker said:
Calendar.lnk is in [\windows\startmenu\programs] usually, it can move around there. Remapping to that would allow you to successfully swap between the apps if needed.
ANYWAY I am glad we were able to solve your problem.
Click to expand...
Click to collapse
Yes, thank you for taking the time to help me out, I apreciate it. I also apologize for going off topic.
NiteStalker said:
find your remapping software, "EZ Softkey" or "Mobile Shell 2" and remap to the "calendar.lnk" in the start menu.
Click to expand...
Click to collapse
I am using "mobile shell 2" how do I remap it to "calendar.ink" so that thumbcal works please.
ozmale said:
I am using "mobile shell 2" how do I remap it to "calendar.ink" so that thumbcal works please.
Click to expand...
Click to collapse
settings> System> SPB Mobile Shell> Today Tab
Thats the path to your softkey remap in mobile shell
I could easily give some money if someone could make a program for making the bottom menu bar to hide and pressing like the big round bottom on phone would make it visible again. It would give alot more screen space for alot of programs, like writing sms etc.
It would be really great, I bet alot of people would like it to and also pay for it!
thanks
BarateaU said:
I could easily give some money if someone could make a program for making the bottom menu bar to hide and pressing like the big round bottom on phone would make it visible again. It would give alot more screen space for alot of programs, like writing sms etc.
It would be really great, I bet alot of people would like it to and also pay for it!
thanks
Click to expand...
Click to collapse
Here you are This is in polish, but program do exactly what you want - hide bottom bar in wm5, you can translate in google:
http://www.pdaclub.pl/index.php?option=com_files&Itemid=54&cid=38&fid=691&srv=2
And this is a file
TomekJ said:
Here you are This is in polish, but program do exactly what you want - hide bottom bar in wm5, you can translate in google:
http://www.pdaclub.pl/index.php?option=com_files&Itemid=54&cid=38&fid=691&srv=2
And this is a file
Click to expand...
Click to collapse
thanks, but i want it for wm 6.1q diamons default os, andbtouch flo
Is it only me that thinks its a good idea?
no your not alone
i found this topic because i had the same idea
ghostdweller said:
no your not alone
i found this topic because i had the same idea
Click to expand...
Click to collapse
Great
It would be really good removing it, having more screen space like opera when browsing it goes to fullscreen and pressing on the screen will make the bar's and menues apear again. Something like that would be great for the rest of the phone!
Ok ill give 200sek for the one that fixes this mod!
hiding top and bottom menus! And makes them appear when wanted!
Questions? ask!
you can do that with vjtoggletoday (www.vijay555.com) and a tool for setting registry keys (the guy who has written batterystatus has also written such a tool).
create a lnk file with the desired settings and map it to a key. that should do it. but you only have one key available to map (long end key)
I've seen that toggletoday thingy but i think its for wm5. I've tried installing it but nothing happend.
Thanks thou!
hi guys, I wanted to just remove the bottom bar like u guys and found this software from some site. Dont know where actually.. But it works on my Diamond.
It just removes the bottom bar.
Hope this helps.
lordaris said:
hi guys, I wanted to just remove the bottom bar like u guys and found this software from some site. Dont know where actually.. But it works on my Diamond.
It just removes the bottom bar.
Hope this helps.
Click to expand...
Click to collapse
Nothing happend with that cab. I did a soft reset but didnt help!
thanks anyway
same here
doesn't work with my touchflo
also tried a softreset
tried to install it with touchflo disabled
and when i enabled it ..... nothing
(also tried the softreset afterwards)
any sugestions ?
reg references ?
(maybe's there's is a way to just remove the black bar (as was done with the curtain remover) and leave the buttons intact ?
(that would be the next best thing for me)
I'd rather hide the menues completly. It would be really nice having a full screen phone. Now it looks more like a pda
BarateaU said:
I've seen that toggletoday thingy but i think its for wm5. I've tried installing it but nothing happend.
Thanks thou!
Click to expand...
Click to collapse
vjtoggletoday works also on wm6. make sure it is the alpha2 version.
you can use the attached zip file. put the autorun lnk file into your windows startup folder and configure this utility before soft-reset.
advantage of vjtoggletoday is, you can define how much of the bars' height should disappear.
another app is dcinobar which hides the bottom bar only
egoist6 said:
vjtoggletoday works also on wm6. make sure it is the alpha2 version.
you can use the attached zip file. put the autorun lnk file into your windows startup folder and configure this utility before soft-reset.
advantage of vjtoggletoday is, you can define how much of the bars' height should disappear.
another app is dcinobar which hides the buttom bar only
Click to expand...
Click to collapse
I dont know what that apps did to my diamond. Im not setting that on autorun! And the config file how are you suppose to config it? When neither of them starts?
by the way: both apps (i have attached dcinobar to my post above) only hide the bars on the today screen only. the bars do not disappear if you run an app.
if this would help you to some extend, i'll give you a step-by-step instruction for vjtoggle.
dcinobar is easier. just run the tool.
Have you tried them on a diamond? Cause the dcinobar did nothing on my diamond.
And the other program i think i will need a step by step guide
Thanks mate!
BarateaU said:
Have you tried them on a diamond? Cause the dcinobar did nothing on my diamond.
And the other program i think i will need a step by step guide
Thanks mate!
Click to expand...
Click to collapse
dcinobar works definitely on diamond. i am currently using it myself.
as said. both programs only hide the bar on today screen.
dcinobar: just copy the exe file to \windows\startup\. softreset. that's it.
vjtoggle:
copy the vjtoggletodayiialpha.exe to \Program Files\vijay555\
(if you keep the directoryname, you do not need to adjust the lnk files)
copy the vjtoggletodayAutorun.lnk to \Windows\StartUp\
copy the VJ Toggle Config.lnk to \Windows\StartMenu\Programs\
now run the config tool and set the values to 0. the config tool only sets the registry keys which are being used by the file in the startup folder.
alternatively you could do the settings yourself:
Code:
[HKEY_LOCAL_MACHINE\Software\Vijay555\VJTodayToggle]
"Enabled"=dword:00000001
"SoftKeySize"=dword:00000001
"StartSize"=dword:00000001
"TrayVisible"=dword:00000001
in this case the top and the bottom bar will have the size of 1px (just in case you still want to access them )
soft-reset.
if you do a soft-reset i would recommend to switch the phone off (long press on the button on the very top of your diamond).
if this is not working, you are definitely doing s.th. wrong as it works on my diamond.
post here if you need some more help.
vjtoggle:
copy the vjtoggletodayiialpha.exe to \Program Files\vijay555\
(if you keep the directoryname, you do not need to adjust the lnk files)
copy the vjtoggletodayAutorun.lnk to \Windows\StartUp\
copy the VJ Toggle Config.lnk to \Windows\StartMenu\Programs\
now run the config tool and set the values to 0. the config tool only sets the registry keys which are being used by the file in the startup folder.
alternatively you could do the settings yourself:
Click to expand...
Click to collapse
I did that, step by step. When i rebooted the htc, i didnt get a top menu at all and not just in today in all windows. And the bottom menu was still there.
And what happends if this will work. Will i get 2 black bars instead of 2 menues or will the screen auto adjust?
BarateaU said:
I did that, step by step. When i rebooted the htc, i didnt get a top menu at all ...
Click to expand...
Click to collapse
isn't that what you wanted to achieve (see post #7)
BarateaU said:
... And the bottom menu was still there...
Click to expand...
Click to collapse
please check the registry settings, if the key softkeysize = 0
also try to set trayvisible = 0
BarateaU said:
...And what happends if this will work. Will i get 2 black bars instead of 2 menues or will the screen auto adjust?
Click to expand...
Click to collapse
the space available for today screen will increase. the today screen is not stretched by the size you gained, you 'll have more space available.
did you try dcinobar?