Where is virtual protective shade? - HD2 General

Hi guys,
During the call I’m setting off bunch of application by accident. The manual says it suppose to be a virtual protective shade over the buttons and only “keypad” and “End Call” should be accessible. But in fact anything I touch is working. What to use to disable all buttons during the call?
Thanks
P.S. installed apps:
Duttys task manager 2.1.1
Montecristoff HD2Tweaks
TC
Cookies home tab 1.7
chainfire 3d driver patch

supplier_new said:
Hi guys,
During the call I’m setting off bunch of application by accident. The manual says it suppose to be a virtual protective shade over the buttons and only “keypad” and “End Call” should be accessible. But in fact anything I touch is working. What to use to disable all buttons during the call?
Thanks
P.S. installed apps:
Duttys task manager 2.1.1
Montecristoff HD2Tweaks
TC
Cookies home tab 1.7
chainfire 3d driver patch
Click to expand...
Click to collapse
maybe ur sensor is broke. sensor top left of phone??

beyondthought said:
maybe ur sensor is broke. sensor top left of phone??
Click to expand...
Click to collapse
I see the small holes/sensors left to the LED. What do they do? How do they block the keys?
on other hand maybe i disabled something in HD2Tweaks and it can be restored back?
Thanks

the proximity sensor will know when the phone is to your face during a call and turn the screen off. make a call and put ur finger over the sensor see if the screen turns off

sensors
One is light sensor to brighthen or dim screen, the other is proximity sensor to turn off screen during call, so you don't touch any with cheek,or ear.

supplier_new said:
Hi guys,
During the call I’m setting off bunch of application by accident. The manual says it suppose to be a virtual protective shade over the buttons and only “keypad” and “End Call” should be accessible. But in fact anything I touch is working. What to use to disable all buttons during the call?
Thanks
P.S. installed apps:
Duttys task manager 2.1.1
Montecristoff HD2Tweaks
TC
Cookies home tab 1.7
chainfire 3d driver patch
Click to expand...
Click to collapse
There's a sensor thats suppose to turn your phone screen off when you put it close to your face. Do you have anything blocking the sensor next to the ear speaker? or maybe a cheap screen protector going over the sensor. I've also heard long hair can mess up the sensor if you don't push it behind your ear before putting the phone up to the ear.(Don't understand how that would effect it, though) Or did you change any settings that effect the proximity sensor?
I've never heard of a "virtual protection shade"... where did you read about that?

zarathustrax said:
There's a sensor thats suppose to turn your phone screen off when you put it close to your face. Do you have anything blocking the sensor next to the ear speaker? or maybe a cheap screen protector going over the sensor. I've also heard long hair can mess up the sensor if you don't push it behind your ear before putting the phone up to the ear.(Don't understand how that would effect it, though) Or did you change any settings that effect the proximity sensor?
I've never heard of a "virtual protection shade"... where did you read about that?
Click to expand...
Click to collapse
Guys,
i called my wife and asked her to test on her identical hd2. the same problem.
i did hard reset -- porblem gone. i will install cabs one-by-one and retest
zarathustrax said:
I've never heard of a "virtual protection shade"... where did you read about that?
Click to expand...
Click to collapse
user manual page 58:
During a call
When a call is in progress, a shade covers the Phone dialer’s onscreen buttons to prevent accidental taps. Only the Keypad and End Call buttons are active.
To access the onscreen buttons, slide your finger down, starting from the top of the shade. Use these onscreen buttons to put a call on hold, dial another contact for a phone conference, enter notes about the conversation, and more.
During the call, you can also browse through
THANKS for the help!

Related

Face Down Mute and Light Sensor

I am having problems with the face down mute and light sensor thing. I would love to be able to get these working.
I have tried Schaps Advanced Config, Diamond Tweak and Registry Edits.
I would like the device to go into mute (do not ring calls) when it is put face down
Also, I would like to disable the automatic screen going off on call and let the light sensor detect when it is close to my ear and turn the screen off...
Appreciate your help
I think there is no light or proximity sensor on the HD.
I do nothing and my HD goes silent if I turn it face down.
How.. How How How? ...
taimoorhusain said:
How.. How How How? ...
Click to expand...
Click to collapse
I dont know, sorry. It´s simply working. As my HD arrives I do a Hardreset install my software and this works.
Atze001 said:
I dont know, sorry. It´s simply working. As my HD arrives I do a Hardreset install my software and this works.
Click to expand...
Click to collapse
Couldnt one then infer that it is obviously a feature of some software you have installed?
Isn't there any setting on:
setting - system - motion sensor or some kind?
Could we have a list of install software on your HD?
Don't sweat it guys!
It just works out of the box!
And fyi the HD has a Light Sensor, G Sensor and Stylus Sensor.
Yes - the light sensor is in the earpiece area (if you have ambient light sensor option checked [default], have it open in a bright room on a mainly white windows screen then cover the earpice area you see the screen dim)
I don't know about it working straight out of the box but you can certainly do it with Gyrator 2.
Black Antitoon said:
I think there is no light or proximity sensor on the HD.
Click to expand...
Click to collapse
There certainly is...
Actually, I wanted to start this thread myself..
Face-down-mute does NOT work on my HD. Neither with Gyrator ON, nor whent it is OFF.
I have checked the registry (HKLM/Software/HTC/Phone/MuteFaceDown or smth like this..), the key setting is "1" so technically it should work....... But it Doesn't!!
Face down mute works if you have it face up and somebody calls you. Just turn it face down and ring is muted.
This is only thing I found on this topic.
Turning the phone down mutes incoming calls for me too. no problems there..
Ciciban said:
Face down mute works if you have it face up and somebody calls you. Just turn it face down and ring is muted.
This is only thing I found on this topic.
Click to expand...
Click to collapse
This is very useful and it absolutely works. Cool! I thought when we place the phone face down, it would jsut be muted period. I was also assuming that there was a way to do this with Gyrator, but didnt know which event to select on orientation face down. I can turn off the screen, but there is no option in gyrator to mute the phone.
Thanks for the help though.
taimoorhusain said:
This is very useful and it absolutely works. Cool! I thought when we place the phone face down, it would jsut be muted period. I was also assuming that there was a way to do this with Gyrator, but didnt know which event to select on orientation face down. I can turn off the screen, but there is no option in gyrator to mute the phone.
Thanks for the help though.
Click to expand...
Click to collapse
This is what I also assumed, when I am in the meeting and get a call I put it face down and it mutes, but then when someone else calls I need to face it up then down again which ideally doesn't work for me.
Isn't there a key like FaceDownMuteAll = 1?
Unfortunately i have the same problem. Flipping the phone is not muting the ring. Maybe its something to do with what we install. Also another strange issue no matter what i do i have the active sync always running in the background.
I have changeScreen installed and if I disable it it works. I think gsenor apps are the cause
Ciciban said:
Face down mute works if you have it face up and somebody calls you. Just turn it face down and ring is muted.
This is only thing I found on this topic.
Click to expand...
Click to collapse
It works straight out of the box, I installed all sort of Gsense apps and it removed and face down mute still works fine.
Even in the case it is faced down and someone ring, I just have to face up, see whos is calling and face down again, it muted.

Proximity sensor in Touch HD

I recently read on gsmarena that the touch hd has a proximity sensor for auto turn off.
is this true?
if yes, could we use this sensor to automatically answer a call for example
maybe we can add to the sensory sdk of koushi a class for the proximity sensor.
just a thought
tommy.touma said:
I recently read on gsmarena that the touch hd has a proximity sensor for auto turn off.
is this true?
if yes, could we use this sensor to automatically answer a call for example
maybe we can add to the sensory sdk of koushi a class for the proximity sensor.
just a thought
Click to expand...
Click to collapse
I'm guessing that the "proximity" sensor that has been discussed is actually the light sensor beside the earpiece. This can be used to turn the backlight off when applied to your ear during a call. using this as a means to asnwer a call would not be reliable, and what would happen if the phone is in your pocket etc etc.
ardsar said:
I'm guessing that the "proximity" sensor that has been discussed is actually the light sensor beside the earpiece. This can be used to turn the backlight off when applied to your ear during a call. using this as a means to asnwer a call would not be reliable, and what would happen if the phone is in your pocket etc etc.
Click to expand...
Click to collapse
i think is just like the iphone when u place it next to ear the it goes off to save battery ?
It doesn't work like the iPhone.
The HD, like all the devices using a Qualcomm chip, is just switching off the screen when a call starts, the phone next to the ear or not. It just doesn't use the light sensor at all during a call.
I asked for a soft that permit the use of the light and G sensor during a call to switch off/on the screen. You'll find more info here : http://forum.xda-developers.com/showthread.php?t=451456
lpaso said:
It doesn't work like the iPhone.
The HD, like all the devices using a Qualcomm chip, is just switching off the screen when a call starts, the phone next to the ear or not. It just doesn't use the light sensor at all during a call.
I asked for a soft that permit the use of the light and G sensor during a call to switch off/on the screen. You'll find more info here : http://forum.xda-developers.com/showthread.php?t=451456
Click to expand...
Click to collapse
I'm looking for this.. If you find a solution send me a PM, I will do the same
Thanks!
Proximty and resume
The proximty sensor will turn off the screen when places the phone next to your ear. I guess this help to prevent accidental touch on buttons. However, I have a problem with my new Touch Pro2:
When the phone is placed away from your ear, the screen will go back to home instead of previous phone dial pad. When I listen to my voice mail or join a conference, a lot of navigation is needed in order to dial the command buttons.(press a 7 for next, or # for ....)
Any chance to make the screen resume at previous location? My first improvement suggestion to HTC.
Concerning this sensor, funny I thought it was some myth as mine never seemed to work or only half assed. Then after flashing many diff roms and settling on the "energy" Rom I see that much to my pleasent surprise it works perfect, just as intended. This is a fantastic feature and my first device it has actually functioned properly on.
mobiler2 said:
The proximty sensor will turn off the screen when places the phone next to your ear. I guess this help to prevent accidental touch on buttons. However, I have a problem with my new Touch Pro2:
When the phone is placed away from your ear, the screen will go back to home instead of previous phone dial pad. When I listen to my voice mail or join a conference, a lot of navigation is needed in order to dial the command buttons.(press a 7 for next, or # for ....)
Any chance to make the screen resume at previous location? My first improvement suggestion to HTC.
Click to expand...
Click to collapse
hi
yeh there is a setting somewhere that lets you go straight to home when you turn the device on instead of loading the screen it was already on.
its set to default but you can change it.
i forgot what the app was called though, i think it was possibly an option in hd tweak or something
THERE IS NO proximity sensor in touch hd
However I've been told that "Touch Incall Screen Tweak" does beautifully on the HD and probably it's what you´re asking.
http://forum.xda-developers.com/showthread.php?t=488991
leobox1 said:
THERE IS NO proximity sensor in touch hd
Click to expand...
Click to collapse
From what I've been reading spec wise I believe your correct, but I cannot explain then why when I make a call with the HD up to my ear the screen goes dark then when I pull it away to input a number from the kp it lights up. Is it the light sensor then? I'll check in the NRG energy ROM forum and search for some info as I'm running his ROM. I love this feature btw and have not noticed it in any other ROM I've tried.
cbreze said:
From what I've been reading spec wise I believe your correct, but I cannot explain then why when I make a call with the HD up to my ear the screen goes dark then when I pull it away to input a number from the kp it lights up. Is it the light sensor then? I'll check in the NRG energy ROM forum and search for some info as I'm running his ROM. I love this feature btw and have not noticed it in any other ROM I've tried.
Click to expand...
Click to collapse
That's "Touch Incall Screen Tweak" in action!
Thanks for the response. Works a treat.

G-off Display

"Description:
With G-off display you can turn off the screen by rotating and holding the phone upside down and holding it like that for a second.
To save battery while listen to your favorite music, simply point your phone downward, light off. All background processes remain.
Require G-sensor found in the latest HTC devices like Diamond / Pro / HD, etc."
Download
Just what I need! but...
Hi
This is a nice app that i've wanted. I know I could use Changescreen as it has a similar feature, but a standalone like this is more preferable for me...
But I just can't download from Rapidshare...
Is it possible to load the .cab here since its only 345kb? or a mirror to somewhere else...
Anyways, Thanks for pointing this App out...
bulletproof_78 said:
Hi
But I just can't download from Rapidshare...
Click to expand...
Click to collapse
I haven't got any problem downloading
thanks a million bro...
Works like a Charm!!!!
Installed on my TP doesnt seem to work and no progam icon to make any type of changes?
great idea. tried on my Omnia, works fine. but screen powers on only with Power button
installed on my touch pro, but doesnt seem to do anything any ideas, would really like to have it working am on WM6.5 if that makes any difference...
cheers!
Installed on my Diamond
it's ok
After a call is not working so
only works after soft reset.
Anyone same problem? solution?
Thejackal_71 said:
After a call is not working so
only works after soft reset.
Anyone same problem? solution?
Click to expand...
Click to collapse
Same problem here. I have to kill it with task manager and run it again It's faster then softreset...
Hello
how about battery drain pls?
not working on HTC Rhodium (TP2) - also I can't see it in programs, etc. Do I need to do anything else after install?
I got a question are there any options? like on conference call (when using loud speakers - device is upside down), will it ignore the g-off? Because I am not sure what would happend if I would press POWER BUTTON in the middle of the call just to get the screen back ..
Not working in my Touch Pro, too
Using latest WinMobile 6.5.21935.
I also did a softreset after installation!
Mashe said:
not working on HTC Rhodium (TP2) - also I can't see it in programs, etc. Do I need to do anything else after install?
Click to expand...
Click to collapse
You don't see it. But it is there. Go to the Program Files and the directory with the same name. Click once on it, and tune the device upside down. It will switch it off.Not ON again.
You can link to it.
I got a question are there any options? l..
Click to expand...
Click to collapse
No options. no nothing! It does work on my TD 1
origin of g-off display
Beware! I am NOT the programmer. I don't know who is either. I just found it.
btw ChangeScreen has a "display off" option too.
worked on the tilt 2
it needs dot net compact framework 3.5 and then it loads on startup... closing the title bar that comes up doesn't seem to stop it from working. however, having said this, i can't say that perhaps the tilt 2 didn't have the behavior before i installed this... it took me a while to realize that upside down doesn't mean face down, which is what i had wanted. but having said that, turning it upside down works great because you can put it in your pocket upside down (which basically you might do anyway).
also, indeed, to get it back on, one has to push the power button. but that's good in case the device moves out of tolerance for downward position it won't be going on and off unintentionally--except that even after the screen is already off it will keep executing--i know this because it vibrates when the screen goes off as well, and if i take it out of upside down position and then put it back without turning screen on again, it will vibrate again. this said, walking with it in a pocket didn't seem to keep triggering it, so overall this is a really cool hack.
now for figuring out why my t2 doesn't turn its speakerphone on when placed face down during a call (i was thinking face down should always turn the screen off by way of proximity sensor--which does work on my device because during a call holding finger over ear speaker turns off the display--just doesn't turn speaker on). wait... just realized... if it did then it would have to assume that just putting it to the ear should turn on speaker. so, i'd say what we have here is a challenge... integrate the proximity sensing with the g-sensor to always turn off the display when face down on a flat, reasonably level surface-- and during a call turn on the speaker too.
if this can be done, then combined with the g-off existing functionality it'd be really sweet--i wouldn't have to turn it upside down _before_ placing it flat on a table while listening to music. and the proximity could help make it less worrysome to just automatically turn the screen back on when picked up.
worked on the tilt 2
it needs dot net compact framework 3.5 and then it loads on startup... closing the title bar that comes up doesn't seem to stop it from working. however, having said this, i can't say that perhaps the tilt 2 didn't have the behavior before i installed this... it took me a while to realize that upside down doesn't mean face down, which is what i had wanted. but having said that, turning it upside down works great because you can put it in your pocket upside down (which basically you might do anyway).
also, indeed, to get it back on, one has to push the power button. but that's good in case the device moves out of tolerance for downward position it won't be going on and off unintentionally--except that even after the screen is already off it will keep executing--i know this because it vibrates when the screen goes off as well, and if i take it out of upside down position and then put it back without turning screen on again, it will vibrate again. this said, walking with it in a pocket didn't seem to keep triggering it, so overall this is a really cool hack.
now for figuring out why my t2 doesn't turn its speakerphone on when placed face down during a call (i was thinking face down should always turn the screen off by way of proximity sensor--which does work on my device because during a call holding finger over ear speaker turns off the display--just doesn't turn speaker on). wait... just realized... if it did then it would have to assume that just putting it to the ear should turn on speaker. so, i'd say what we have here is a challenge... integrate the proximity sensing with the g-sensor to always turn off the display when face down on a flat, reasonably level surface-- and during a call turn on the speaker too.
if this can be done, then combined with the g-off existing functionality it'd be really sweet--i wouldn't have to turn it upside down _before_ placing it flat on a table while listening to music. and the proximity could help make it less worrysome to just automatically turn the screen back on when picked up.
sorry for the duplicate post above--tried to edit, then hit save by accident
edit... i just tried screenchange and it in theory seems to do exactly what i want, but in practice, with 2.78 and any sensitivity level and appropriate no light option checked, it turns off the display even if there is light (and lots of it to be sure). i hold the device upside down above my head and the display goes off. i'm not covering the proximity sensor. my proximity sensor does work when in a phone call. i tried rebooting. i think the proximity sensor may be off somehow on my device...maybe htc only wants it on in a phone call? i will have to see if screenchange will work right with the device in a phone call... further posts will go over with screenchange.
btw, regarding the forum... its annoying that my edit made a whole new post in the first place.
cool!!!thanks

Screen not going off in a call!!!

Hy all
I have a strange problem with my X10! The will not go off in a call! (or at least most of the times it won't) The sensors should turn the screen off while the phone is to to my ear but most of the time it will not!
There is a hidden menu that have tests for almost every hardware component but the test for the proximity sensor only shows that the sensor is OFF and won't do the test!
Ideas?
The sensor is the little black circle (sort of) above and to the left of the "n"
e.g. Sony Ericsso'n'
Have you tried putting your finger over it during the test?
same problem here i tried the finger-trick doesnt work
I tried it and the test shows ON while my finger is there! So the sensor works properly but why the dialer is not using it to control the screen?
As stated before, if you cover the 'hole', the screen would not react to any of your finger touches. The screen would still be on but would turn off according to your settings (like 30 seconds or 1 minute or whichever). Try it. Call someone, cover the hole and try to hit 'end call' or slide up the keypad and then cover the hole and try to hit numbers.
The purpose of the proximity sensor is to turn the screen off in a call while the phone is to your ear! if i cover the sensor it must turn the screen off! but it doesn't! There is some kind of timeout set to this! The screen will turn off but after some time! this makes the proximity sensor almost useless!
No, it is to disable touchscreen buttons. It will turn off when time you've selected is over and turn on again and enable touch buttons when you take the phone out from your face.
Though i think you're right, it should turn the screen off to save battery, it is silly to have the screen on when you are using it.
Sent from my X10i using Tapatalk
Zenghelis said:
No, it is to disable touchscreen buttons. It will turn off when time you've selected is over and turn on again and enable touch buttons when you take the phone out from your face.
Though i think you're right, it should turn the screen off to save battery, it is silly to have the screen on when you are using it.
Sent from my X10i using Tapatalk
Click to expand...
Click to collapse
Quite right!
I guess the expectations are again set by Apple's standards. Their proximity sensor functions as one would expect.
However the sensor on the X10 does what it was designed to do, and that's to deactivate the touchpad whilst the device is held up to your ear.
The screen timeout is a different setting all together (unfortunately).
Baggyb said:
Quite right!
I guess the expectations are again set by Apple's standards. Their proximity sensor functions as one would expect.
However the sensor on the X10 does what it was designed to do, and that's to deactivate the touchpad whilst the device is held up to your ear.
The screen timeout is a different setting all together (unfortunately).
Click to expand...
Click to collapse
Not the expectation set by Apple. It's expectation for any right minded individual.
SE software is just well known as one of the worst top players in the industry.
FFS, they spent all the time on DRM, lock the phone, developing battery hungry useless software on 1.6 rather than push out 2.1 asap, that tells you something.
superprelude said:
Not the expectation set by Apple. It's expectation for any right minded individual.
SE software is just well known as one of the worst top players in the industry.
FFS, they spent all the time on DRM, lock the phone, developing battery hungry useless software on 1.6 rather than push out 2.1 asap, that tells you something.
Click to expand...
Click to collapse
Why not go through the Manual once before abusing Company left - right.....
Let me copy and paste it for you guys........
Sensors
Your phone has two built-in sensors – a light sensor and a proximity sensor. The light sensor is used for automatic LCD backlight control. The proximity sensor turns the touch screen off when your face touches the screen. This prevents you from unintentionally activating phone functions when you are engaged in a call.
TechGuru_x10 said:
Why not go through the Manual once before abusing Company left - right.....
Let me copy and paste it for you guys........
Sensors
Your phone has two built-in sensors – a light sensor and a proximity sensor. The light sensor is used for automatic LCD backlight control. The proximity sensor turns the touch screen off when your face touches the screen. This prevents you from unintentionally activating phone functions when you are engaged in a call.
Click to expand...
Click to collapse
Yes and this is plain stupid use of the sensor! Take the HD2 for instance! Its proximity sensor turns the screen off the second you take the phone to your ear! This is done with every HTC device having the sensor! It is just misused on the X10! I hope that somebody here would correct this with a little program some day!
OrionBG said:
Yes and this is plain stupid use of the sensor! Take the HD2 for instance! Its proximity sensor turns the screen off the second you take the phone to your ear! This is done with every HTC device having the sensor! It is just misused on the X10! I hope that somebody here would correct this with a little program some day!
Click to expand...
Click to collapse
This is the main problem with us ,,, we start to compare and complain rather than think why did SE will give two sensors instead of one.
Answer is not known to me but this much I know they know better than us.
If you think you know better, be my guest and throw some knowledge here. I am new to Android but not to SE.
So im new to the forums, but I was having a problem with the proximity sensor...
As stated in a lot of threads, the proximity sensor does work and will "lock" the screen so that once your face is near the screen it will not allow any clicking of the buttons.
Also the screen is supposed to turn off about 15sec into the call. Mine turned off, but then all of a sudden turned on again...this would happen repeatedly.
I found out the solution...it seems advance task killer was not allowing the screen to turn off.
I had auto kill enabled and set it to when the phone was locked to kill apps.
I turned off auto kill, and everything seems to be working fine with the screen and proximity sensor now..
hope this helps anyone having this issue!
thx, same problem here !!
so its pretty clear none of us know the answer to this, but yet we're still bashing each other. LOL! ppl let's get constructive, we dont have the answers so lets accept the fact and seek help some where else.
o2 Germany told me, that Sony Ericsson will bring us an update within the next 4 weeks to all devices.
It will be an update with alot of bug fixes (e.g. proximity sensor ) and speed improvements.
So, be cool. Sony Ericsson is working on that and with Eclair in autumn, our battery will perform very well.

camera activates in my pocket :( :( :(

this is very annoying. i think the volume button activates my camera when in my jeans pocket.
how do i disable the shortcut to the camera by the volume button?
vistascape said:
this is very annoying. i think the volume button activates my camera when in my jeans pocket.
how do i disable the shortcut to the camera by the volume button?
Click to expand...
Click to collapse
I know you can take photos by pressing the volume key (an option in the camera settings) but I've been unable to find an option to create a shortcut TO the camera by pressing the volume key. Are you sure this is what's causing it?
vistascape said:
this is very annoying. i think the volume button activates my camera when in my jeans pocket.
how do i disable the shortcut to the camera by the volume button?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2477415
Fluke777 said:
I know you can take photos by pressing the volume key (an option in the camera settings) but I've been unable to find an option to create a shortcut TO the camera by pressing the volume key. Are you sure this is what's causing it?
Click to expand...
Click to collapse
if you hold down the volume button 3sec, the camera activates....
DjKr1z said:
http://forum.xda-developers.com/showthread.php?t=2477415
Click to expand...
Click to collapse
is there any solution by now??????? im getting panik attacks...
vistascape said:
if you hold down the volume button 3sec, the camera activates....
is there any solution by now??????? im getting panik attacks...
Click to expand...
Click to collapse
Ah, I had no idea that shortcut existed!
Yeah, I can definitely see how this could be a problem. Doesn't look like there's a fix yet for non-rooted devices.
I'm thinking/guessing that something else is causing the issue.
When the phone is in your pocket, I would think that the proximity sensor would be covered. If the proximity sensor is covered, then pressing volume down does not open the camera app (you can try this yourself by putting your thumb over the proximity sensor and trying to use the volume down key to open the camera app; for me it doesn't open. Take my thumb off, try again, and it does open).
Is your pocket "see through" or does it possibly allow light to pass through? Or does the top half of your phone stick up and outwards from your jeans pocket (where the proximity sensor might be exposed is what I'm eluding to)?
The proximity sensor is supposed to prevent "pocket pictures". Can someone who has the problem try the thumb test? If the camera app still opens with the sensor covered, that would at least explain it (doesn't solve the prob but we'd know why).
Edit: *if* it looks to be a prox sensor issue, here's a free app to test it -- https://play.google.com/store/apps/details?id=com.tigermonster.proxfinder&hl=en
Klotar said:
I'm thinking/guessing that something else is causing the issue.
When the phone is in your pocket, I would think that the proximity sensor would be covered. If the proximity sensor is covered, then pressing volume down does not open the camera app (you can try this yourself by putting your thumb over the proximity sensor and trying to use the volume down key to open the camera app; for me it doesn't open. Take my thumb off, try again, and it does open).
Is your pocket "see through" or does it possibly allow light to pass through? Or does the top half of your phone stick up and outwards from your jeans pocket (where the proximity sensor might be exposed is what I'm eluding to)?
The proximity sensor is supposed to prevent "pocket pictures". Can someone who has the problem try the thumb test? If the camera app still opens with the sensor covered, that would at least explain it (doesn't solve the prob but we'd know why).
Edit: *if* it looks to be a prox sensor issue, here's a free app to test it -- https://play.google.com/store/apps/details?id=com.tigermonster.proxfinder&hl=en
Click to expand...
Click to collapse
wait a minute... is the sensor by the front camera? i still can open my camera when covering the sensor. why isnt my sensor working????
EDIT: the proximity sensor app shows my sensor working. what is happening?
Hmmm... I do not know.
Yes, the proximity sensor is in the cluster of 3 at the left of the earpiece grille (camera, proximity/ambient light sensor, led).
I have read on other boards that sometimes a screen protector can interfere with the proximity sensor. Some screen protectors go over that cluster, others have cutouts for them (the one that came with my phone has cutouts). The manual suggests that we check that the area around it is clean (not sure if they meant fingerprints or what).
So, with the sensor covered up, the volume down key still opens the camera app, correct? Hmmm... oh. Does your phone answer a call by putting it up to your ear (if you have that enabled)? I think that feature uses both the proximity sensor and the motion sensor.
Klotar said:
Hmmm... I do not know.
Yes, the proximity sensor is in the cluster of 3 at the left of the earpiece grille (camera, proximity/ambient light sensor, led).
I have read on other boards that sometimes a screen protector can interfere with the proximity sensor. Some screen protectors go over that cluster, others have cutouts for them (the one that came with my phone has cutouts). The manual suggests that we check that the area around it is clean (not sure if they meant fingerprints or what).
So, with the sensor covered up, the volume down key still opens the camera app, correct? Hmmm... oh. Does your phone answer a call by putting it up to your ear (if you have that enabled)? I think that feature uses both the proximity sensor and the motion sensor.
Click to expand...
Click to collapse
i have that disabled. but when talking and taking the phone of my head the screen lights up and vice versa.
why isnt the sensor blocking the camera shortcut? very strange...
vistascape said:
this is very annoying. i think the volume button activates my camera when in my jeans pocket.
how do i disable the shortcut to the camera by the volume button?
Click to expand...
Click to collapse
I had the exact same problem. but in my case, i don't think it was the volume button, but the lockscreen.
Sometimes the phone woke up and somehow the screen probably swiped to the right enabling the camera lockscreen widget.
I disabled the camera locksreen widget and had no problems since...
emboha said:
I had the exact same problem. but in my case, i don't think it was the volume button, but the lockscreen.
Sometimes the phone woke up and somehow the screen probably swiped to the right enabling the camera lockscreen widget.
I disabled the camera locksreen widget and had no problems since...
Click to expand...
Click to collapse
i will try it. will report results tomorrow!!
but it doesnt explain why i can open camera by pressing volume 3sec while covering the sensor. the other guy in this tread cannot do that. there is something wrong with my phone...
vistascape said:
i will try it. will report results tomorrow!!
but it doesnt explain why i can open camera by pressing volume 3sec while covering the sensor. the other guy in this tread cannot do that. there is something wrong with my phone...
Click to expand...
Click to collapse
Hmmm, my phone normally can open camera in my pocket when pressing camera shortcut.
I always use this shortcut to take a photos when I need it for "urgent" moment.
I pull in my hand to pull out my phone from my pocket, I press the shortcut, so after I pull out my phone, the camera is ready for me.
And that's normal for me.
Can you check the camera button, is it too soft and too easy to accidentally pressed?
I never had issue like you.
With or without case, it's fine with me.
since I have a case I don't have it anymore
Sent from my LG-D802 using xda app-developers app
can you guys open the camera via volume down button while covering the sensor?
emboha said:
I disabled the camera locksreen widget and had no problems since...
Click to expand...
Click to collapse
Holy crap, please tell me how to do this. I have Ti Backup and can freeze it if I can figure out what to freeze.

Categories

Resources