Database Users

trackball stuck

so... this morning i noticed that trackball isn't functioning... i could move it in any direction and press it, but nothing happened... so i tried to reboot and now it keeps going into fastboot (as it's always pressed)
now, since i'm not anywhere near any of "supported" countries, sending it to back to htc is not an option... is there anything i can do to override going into fastboot and to boot it normally (i don't usually use trackball, i don't really care if it's working, i just want to boot)

can you select to boot normally from fastboot? or hboot

nope...i can't move selection while in fastboot... i'm pressing vol+- but nothing happens... probably because it thinks trackball is pressed all the time...

I had the same thing happen with my power button. I had to send the phone back to be repaired and it took almost two weeks.
I don't know if anything has been posted yet but I remember someone saying the N1 has the same trackball as one of the blackberries. Maybe there is a guide on swapping them or even just disassembling it to clean.

well... sending it back (from serbia to usa) is definitely not an option, partly because it would probably take at least month to get it back, partly because i don't want to risk having to pay duty&tax when it comes back.
disassembling, however, is an option, and i will do it if no one has better idea
thanks for replies anyway...

alt+64 said:
so... this morning i noticed that trackball isn't functioning... i could move it in any direction and press it, but nothing happened... so i tried to reboot and now it keeps going into fastboot (as it's always pressed)
now, since i'm not anywhere near any of "supported" countries, sending it to back to htc is not an option... is there anything i can do to override going into fastboot and to boot it normally (i don't usually use trackball, i don't really care if it's working, i just want to boot)
Click to expand...
Click to collapse
When you press it does it make the clicking noise? if it doesn't, replacing the trackball wont fix your issue. The trackball popple that registers the click when a short is made is depressed fully and is always making a short. you either have to rebend this popple or replace it entirely. You need something similar to this

When you press it does it make the clicking noise?
Click to expand...
Click to collapse
yes it does... click, feedback... everything is exactly the same as it was...
btw... i'm at home now, so i connected it to usb and managed to boot with "fastboot reboot"... problem is that it boots into safe mode (i guess it does it if you hold trackball during whole boot process) so i cant open any 3rd party apps which makes it kinda unusable...
btw2... scrolling with trackball is working normally.. clicking does not
i guess ill take it apart and try to disconnect trackball completely..
any last thoughts before disassembling?

some witchcraft happened today, and my trackball is kinda working now, but phone keeps booting to safe mode...
taking battery out for 2 minutes, as some suggested, didn't help, and neither did holding trackball while booting... any other idea?

did you try factory reset?

yes... no luck...

help i9000 after flash, doing loop of at&t logo, can not enter download mode,

help i9000 after flash, doing loop of at&t logo, can not enter download mode,
when plugged in screen goes black.
!! if anyone can help please do not hesitate, mostly appreciated.

Try to hold the Down+Menu+Power combination while INSERTING the battery into the device.

i try that seem to have no response and when unplugged from usb it loop at&t logo
or plugged in usb screen goes black and no response seem from pressing buttons

I had a similar problem as most phones in Canada seem to have Download/Recovery mode disabled, and here is what worked for me.
Grab something like One Click Un Root (all models), and click one click un root (obviously phone has to be on and plugged into the computer).
This should automatically reboot you into Recovery Mode!
All you have to do is "wipe data/factory default" or something like that (should be the third option).
As it states, you will loose all your data, but at least you will have a functionning phone!

did it work?

Hi. I have similar problem. Can anybody give instruction what can I do?

I have this problem too. Please help somebody

Add me to the list. Bell Galaxy S, went to unlock my phone the screen went black. Now it will not boot into the OS, the galaxy S splash screen displays then nothing. The menu and back button light up, thats all. ****[email protected]@
I have not rooted or anything.
Of course my download mode does not work.. Going to try this one click root thing if I can find it.
NOT HAPPY

This is not working. Probably because the phone is not in USB debugging mode as I can't change it... Is there any other way to get the phone into recovery mode?
**** me

i had the same thing happen to me the other day with my bell galaxy s and my phone wont do the 3 button combo trick. i left my phone plugged in to a wall charger for a while until the back of the phone became a little warm. i pulled the battery and then left the power cord plugged in and put the battery back in. i held the volume down and enter button until the battery charging indicator showed up, then i also pressed and held the power button until the boot animation started (this is the blue moving swirl and music, not the galaxy s splash scree) and then i let go of the power button. it took a few attempts at this before it actually worked, but eventually it will go into download mode at which time you can open the odin app, then plug in the usb cable and flash your phone that way. it did seem to make a difference if the back of the phone (around the camera area) was warm. if i let go of the power button while the music was playing and the phone did not enter download mode i would keep all 3 buttons pressed until it shut down again, then i would only let go of the power button while the phone initiated the charging screen, then once the battery logo was displayed i would hold the 3 buttons again and would just keep doing this until it went into download mode. i have flashed it at least 5 times today and i have been able to do this each time.
i also had an issue where odin would not recognize my phone was plugged in and windows would show a message saying the usb device was not recognized. i left the phone plugged in and while in download mode i pressed the volume up, enter button and power button until the phone went blank and when the galaxy s logo showed up i let go of the power button and the phone would go into recovery mode and then the usb drivers would be installed. i would then do the 3 button combo for download mode and odin would work fine. it took several attempts but it does work. i hope this helps you guys

If I hold all three buttons the splash screen does not come on, it just keeps looping the Galaxy S logo until I let go of the power button....

xZeDgEx said:
If I hold all three buttons the splash screen does not come on, it just keeps looping the Galaxy S logo until I let go of the power button....
Click to expand...
Click to collapse
That's what mine did too, several times in a row and then it worked. For some reason it only works after the battery is charging for a bit and the back becomes warm. then it works at will

No luck. I am probably screwed getting it exchanged now too as I am passed the 14 days from Best Buy.

the on click thing doesn't work, if your phone is already bricked.
also it is not the phone's fault for not working, the phone was working properly before you tried the hacks.
whenever you do these kind of things you know you are entering into the "not supported" "not covered by warranty" zone.
in the worse case scenario, if you can no enter download mode to recover your phone, it'll be to take the phone back to bell and claim warranty on it, and prentent you don't know what happened to it.
xZeDgEx said:
Add me to the list. Bell Galaxy S, went to unlock my phone the screen went black. Now it will not boot into the OS, the galaxy S splash screen displays then nothing. The menu and back button light up, thats all. [email protected]@
I have not rooted or anything.
Of course my download mode does not work.. Going to try this one click root thing if I can find it.
NOT HAPPY
Click to expand...
Click to collapse

AllGamer said:
the on click thing doesn't work, if your phone is already bricked.
also it is not the phone's fault for not working, the phone was working properly before you tried the hacks.
whenever you do these kind of things you know you are entering into the "not supported" "not covered by warranty" zone.
in the worse case scenario, if you can no enter download mode to recover your phone, it'll be to take the phone back to bell and claim warranty on it, and prentent you don't know what happened to it.
Click to expand...
Click to collapse
Its my fault??
I did not hack my phone. Its not rooted, I did nothing to it.
By "unlock" I meant exactly that, unlock as in swiping the screen to unlock it.
The more I search the net the more posts I find of Galaxy S phones randomly bricking...

on the original message sounded more like you went to Unlock the phone, as in SIM unlock the phone using any of the tools available out there, and there has been already several people which had the same problem.
if you go back to Bell for an exchange, you better not use the word "unlock" rather use Swipe
as the message on the phone "swipe the screen to unlock"
there are no known issue about this causing the phone to brick.
if that is what happened to you, you should have started a new topic for people to help you, instead of hijacking the topic from the OP, as your issue is different from OP, the OP actually screwed up because he/she flashed the wrong ROM to the i9000
... anyways, Does it work if you reboot the phone?

I have rebooted the phone about 100 times. The phone crashed when I unlocked it to check a text I received. (not hacked). Has not booted up properly since. I have found many others with the same issue who have also not hacked/rooted/unlocked/ their phones.
Waiting on Best Buy to call me back. I am so pissed right now, I have been bragging to my friends and co-workers how awesome this phone is, one has already picked one up, I hope his doesn't brick too. Not recommending it to anyone anymore..

did you load a lot of MP3 to the phone?
can you boot into Recovery Mode?
in the recovery mode you can wipe the Cache and wipe the data
that should make your phone work normal again
it'll be best to open a topic to help you trouble shoot your interesting issue, as it's the first i've hear that you get a black screen after Swiping out of the lock screen

I can't get into recovery mode. I have tried every button combination I have found. I had about 2 GB of music on the phone. I also installed the Android SDK to try ADB, but since the phone is not in USB debugging mode it does not see it.

xZeDgEx said:
I can't get into recovery mode. I have tried every button combination I have found. I had about 2 GB of music on the phone. I also installed the Android SDK to try ADB, but since the phone is not in USB debugging mode it does not see it.
Click to expand...
Click to collapse
on the other topics relating to the 3 button not working.
have you tried the heating up method?
or the plugging the battery in, when all 3 buttons are pressed? (of course for this one you will need help from a friend, unless you are very skilled at keeping the 3 button on hold meanwhile able to slide in the battery in with out a 3rd hand)

HELP! Trying to help a friend out.

So a friend called me today and said he is having problems with his Vibrant and wanted me to come take a look at it. He explained that he flashed a rom and now everytime he boots it up, it gets stuck in a force close loop hell. I got there and verified that's happening and said that I could just flash him back to stock. Well, come to find out he's also hardware locked! I tried to figure out a way to enter safe-mode (have used this on my Mytouch but it had actual buttons to make this work) but it was no-go since it's capacitive. On top of all this, he doesn't have debug mode enabled and I can't get to the settings due to the force close loop and no working launcher/home. I couldn't get any adb commands sent to the phone due to no debug mode, so that means I can't even adb reboot into recovery. I spent almost 2 hours on it before I had to give up. Does anyone have any suggestions that I may have overlooked or not thought of?
Greatly appreciated! XDA has some of the smartest damn people around!

Have you checked this out?
http://forum.xda-developers.com/showthread.php?t=804305

Duce HD2 said:
Have you checked this out?
http://forum.xda-developers.com/showthread.php?t=804305
Click to expand...
Click to collapse
Yes, in fact I had that very thread open on my netbook as I was working on his phone. There's one (of many) problem with this:
"turn on USB debugging in Settings-->Applications-->Development"
As I stated in my OP, he doesn't have debugging turned on already, and I'm unable to get to it in settings because at startup it's in a FC loop and I can't get to settings either by holding MENU or using the launcher.
Is there another way to get to phone settings besides those two methods? How about going into safe mode? I've done that before with my MT3G, but it has hard buttons that facilitate this with ease. With capacitive, not so much. Is it possible to enter safe mode on the SGS phones with capactivie screen?

I seriously doubt this has stumped the brains of XDA!

Email me lets see if I could help
[email protected]

What do you think caused the force close loops? Was your friend tinkering with his phone? Did he install a lagfix?Are you doubly sure he's hardware-locked?Did you try Download mode?
Lots of questions...I had this problem once. It was due to the fact that installed Ryanza's early lagfix and tried to remove it. My phone had a force close loop, BUT I had enough patience to wade through the loops and in the very short gaps at which they appeared, I managed to navigate the phone into settings (~an hour). The moral is: Try very hard to get into settings and don't lose your patience.

You can try booting into safemode, maybe that will help. Just turn it off and when it powers on the second you see the animation start press and hold the home button.

cthach11 said:
What do you think caused the force close loops? Was your friend tinkering with his phone? Did he install a lagfix?Are you doubly sure he's hardware-locked?Did you try Download mode?
Lots of questions...I had this problem once. It was due to the fact that installed Ryanza's early lagfix and tried to remove it. My phone had a force close loop, BUT I had enough patience to wade through the loops and in the very short gaps at which they appeared, I managed to navigate the phone into settings (~an hour). The moral is: Try very hard to get into settings and don't lose your patience.
Click to expand...
Click to collapse
From what I gathered, he tried installing the FrankenTwiz rom and something went wrong. He couldn't fully explain exactly WHAT went wrong, and so I'm coming into this whole thing without a lot of answers to help troubleshoot it. I know he's HW locked because that was the first thing I tried (recovery mode) and it's not able to get into it. When I fist got my Vibrant it was HW locked and the behavior is the same. I exchanged mine the next day for a non-HW locked. I tried every method to get into recovery/download mode but unable to. I remembered "safe mode" from my MyTouch 3G, but it needed the hard button (menu) pressed on bootup. Being capacitive screen, it doesn't respond the same way so I couldn't even use safe mode. He doesn't have USB debugging enabled and I can't get to settings to enable it due to the FC loop. I sat there pressing CLOSE a million times to find that "break" in the process to try and get to settings with no luck. Hope that answered everything.

icandy75 said:
You can try booting into safemode, maybe that will help. Just turn it off and when it powers on the second you see the animation start press and hold the home button.
Click to expand...
Click to collapse
That didn't work. I thought safe mode was MENU, not home? (btw- which animation? The tmo pink or the Galaxy S? Tried both an no result.)

Ok, figured out SAFE MODE!
Power up the phone and start pressing the capacitive buttons. As soon as they light up during boot up process, press and hold MENU & HOME all the way through until you see SAFE MODE appear in the bottom left of the screen. At that point you can release the buttons and you will now be in safe mode.
Now I just need to get in touch with my friend and meet up with him to try this. Hopefully it will break the FC loop from Hell and I can get into his settings to enable debugging mode.
**MODS - I didn't find how to get into safe mode anywhere in the Vibrant forums. Maybe it can be added to the Bible to help others? Thanks!**

That's new for me, mine goes holding the home key. Timing is of the essence though. I have to press and hold the second the S forms on boot.

icandy75 said:
That's new for me, mine goes holding the home key. Timing is of the essence though. I have to press and hold the second the S forms on boot.
Click to expand...
Click to collapse
I tried multiple times using your method and no dice. I get consistent results with my method (MENU + HOME), so not sure what to say...
Anyhow, it looks like he's screwed. Met up with him after work and even though I can get into safe mode, the TW Launcher is still going nuts, FC hell! Unable to get it to stop long enough to get to settings to enable debugging. He's going to put it on Ebay for parts. Dude had it for a week and is out $400. Feel so bad for him, but I guess it teaches him a lesson. If you don't know what you're getting into with flashing ROMs, better step back and either ask for help from someone with experience or just not attempt it at all. This was his first flash attempt and he crashed hard.

[Q] Most Complicated Brick thus far. A cry for help..

I know I have Few or no posts at all... but I am quite experienced with Android OS... I wish i could have contributed more to this forum before asking for help on such an INTRICATE problem.. Anyways
The rundown is this, in the sequence in which the things occured... Today i set my phone down, (Droid X, Rooted, Running Apex 1.4.1) and it was working perfectly fine. I then pick it up, absolutely nothing had been done to it between me setting it down and picking it up, and the hard buttons (Menu, Home, Back, Search, Volume Rockers, Camera Button) all not working, only the lock button on top. So, I think like I always do, Battery pull time. I preform a pull, and turn the phone back on, then it's stuck on "M", just stays there. I pull again, stuck again, nothing, one more time and it goes to stock recovery mode just the Android and Exclamation triangle, (I have clockworkmod installed) but of course, no hardbuttons are working so it's false hope. I press buttons over and over out of frustration and I bring up the menu, but that's all i can do, and i have to hold the Volume rocker down, and search to even do that, but besides that i can do nothing more. So I'm stuck at what I see as a dead end, can't move through recovery because buttons aren't working for whatever reason, so i can't flash SBF, or stock reset... So I'm asking for help, please.

wunsung said:
I know I have Few or no posts at all... but I am quite experienced with Android OS... I wish i could have contributed more to this forum before asking for help on such an INTRICATE problem.. Anyways
The rundown is this, in the sequence in which the things occured... Today i set my phone down, (Droid X, Rooted, Running Apex 1.4.1) and it was working perfectly fine. I then pick it up, absolutely nothing had been done to it between me setting it down and picking it up, and the hard buttons (Menu, Home, Back, Search, Volume Rockers, Camera Button) all not working, only the lock button on top. So, I think like I always do, Battery pull time. I preform a pull, and turn the phone back on, then it's stuck on "M", just stays there. I pull again, stuck again, nothing, one more time and it goes to stock recovery mode just the Android and Exclamation triangle, (I have clockworkmod installed) but of course, no hardbuttons are working so it's false hope. I press buttons over and over out of frustration and I bring up the menu, but that's all i can do, and i have to hold the Volume rocker down, and search to even do that, but besides that i can do nothing more. So I'm stuck at what I see as a dead end, can't move through recovery because buttons aren't working for whatever reason, so i can't flash SBF, or stock reset... So I'm asking for help, please.
Click to expand...
Click to collapse
have you tried getting it into bootloader mode?
hold vol - + camera + search while powering the device on
if you can get into bootloader mode than you can flash an sbf file

If you tried everything you can think of and still can't get it to do anything take it back to verizon. If you can't get it to work I doubt most of the employees at verizon would be able to get it to work either
Did you try a long battery pull. 30 seconds or more?
Sent from my Droid

Pull the battery and then.plug the phone into.the wall charger. Then put the battery back in, and when the phone boots up it should boot to clockwork
Sent from my DROIDX using XDA App

Did this work?

[Q] Safe Mode? What is it? How to get out of it?

I am having all sort of trouble with my newly flashed G1, the main issue being the keyboard only has 4 keys that work after a HBOOT flash back to stock..
It boots up to the google log in screen ok but in the bottom left corner it says 'safe mode'. I can find nothing in the G1 forums about it but one of the other forums (myTouch) mention it is where it loads a minimum amount of apps or something if booted while holding the menu button down.
Anyways, is there anyone who knows how to get out of safe mode? And why it might be in there in the first place?

figured it out. ( I searched xda using google )
hold the red and green buttons down together.
Some people say the menu button sticking causes this 'safe mode' to occur.
unfortunately my keyboard still only has 4 keys that work even without the safe mode issue.
edit: And upon rebooting its back in 'safe mode'. I would assume that means my menu button is stuck down? I wonder if that is why my keyboard is having issues too. I will have to tear it apart now.

hmmm yes good idea.. clean it all out than tell me what happens i will help you out from there

I think this safe mode isnt save at all...

One of the rep's told me to turn off the phone. Take out the battery for 20 sec. then reinstall and turn on. Should be out of safe mode.