Hello friends.
I try to connect my htc wizard with usb to my win7 netbook.
ok, nothing happends, and i downloading the crappy windows mobile drive center manually. ok, connect and he found it. BUT, now i try to install "Button's 1.05 ROM" for rom upgrading and he disconnected the ppc everytime. the ppc goes to the "three colors bootmenue" and nothing happens no mather what buttons i push. hope you can help me to unlock this crazy phone under win7
Thx
Related
hi to everyone,
about a year ago, i patched thr spl...now is 2.13.0000. Yesterday i tried to install to my imate jamin (s200) the new qtek s200 italian rom. The process start successfully and cheked the version. When the phone reboot itself and shows the bootscreen, he program said that there was error 260 and cannot continue; on the phone screen reamin the boot section. When i try to rebbot, it works, but in this way i cannot update my phone. How i can solve this??
i use windows vista and windows mobile device center 1.0 version; also, i used on innotek virtual machine, windows xp with activesync 4.5I would like to inform you, if you can help, theat about a month ago i sent my phone to the assistence because the audio didn't work (is it possible that the assistence did something that block the update??
thanks and please help!!
on the bootscreen, compares RUU on the right-up side,ipl 2.13,spl 2.13 and (all writes are in the red section) and usb on the left-bottom side (on white background)! that's all, i think i've said everything...please HELP!!!
THE PROBLEM IS THAT PROPHET CANNOT CONNECT AT USB IN BOOTLOADER
i've tried, also, to use camera + softreset and when reboot the writes RUU disappear, but still not recognize on usb when in bootloader.
Someone can solve this problem? please....
your problem is vista!
use native windows xp and not VMWare or some Virtual Computer!
have the same strange errors if i flash with vista.
how you have flash your ipl to 2.13??
i used the pdamobiz...i think my ipl was 2.15.0000, and after downgrade, it becomes 2.13.0000. Sound strange? So, do you think the problem is vista and the VM? but i read in this forum that lots of people flash hos phone using xp on virtual machine....but you mean that in vista if you plug the phone (botloader) in to computer, windows doesn't recognize it?
i havent test "win xp vm" on a "vista host". my work laptop has vista and i cant update any rom/firmware. vmware use the host system and his driver to route the usb device. possible the usb-subsystem in vista is changed to much ;-)
test it ... if work ... ok ... we can debug it!
SOLVED
SOLVED! I flashed the prophet on "real" xp. Now my spl changed to 2.20.000 and ipl remain at 2.13.0000. I have another question: if i flashthe phone with one rom of wm6 (which is better?or which is the rom with less bugs?), can i reflash with a wm5 rom without problem?
thanks in advance and thanks for your advice!!
I've just installed WM6 onto my XDA IIs
And when I start-up there were some problems
A Warning appear that : The file "PhoneService" cannot be opened.Either its is not signed with a trusrted certificate, or one of its component cannot be found, If the problem persists, try reinstalling or restoring this file.
The sesond one is "sms_alert_fix"
Can you guys hep me so solve these problems....thanx alot
Best Regards
Have you installed the updated .cab files from Xplode?
Edit: Will be called ".cabs2"
phoneservice was part of eten phone tools and it is not compatible with our phones, and wm6 i think, about sms_alert_fix i have not tryed it and don't know what it does in wm6
The problem with me now is i cannot connect my divice with my PC
Active Sync does not work. A message appear that : active Sync cannot connect to the Windows Mobile powered device. To troobleshoot the problem, click OK. I've followed those troobleshooting step but cannot solve anything...
I'm a newbie...plz help me... (
try to reinstall activesync, and hardreset your BA (the problem should be in one of them, PC or BA)
I know it's quite silly for me but i cannot hard reset my BA
I have pressed and hold the power button then press the reset button but there's nothing better, the BA just reset but there's no change.
I've downgraded it to Windows Mobile 2003 then upgraded it again to WM6 but all the settings at the first time I installed WM6 and configed are still there.
I also try to uninstall Active Sync and install it a gain too.
My PC use Windows XP, and when i try to connect the BA to another PC that use Windows Vista, it worked. So i think the problem was from my PC.
But now i wanna hard-reset it but i can...oh...i'm getting crazy with this...
Please note that with the "old" notebock, with vista too, i have use the Hermes without problem.
Just connect via usb and all works fine.
Now with the new notebock (same os (wm6.0 in ppc, and vista home in the notebock)) i have problems.
Vista dont recognize hermes.
so i cant connect ppc to notebock.
Some ona have idea how can i do a connection and a sync with vista.
Ps
i have install the wmdc but dosent works.
Please help.
pps
i have try to unceck enable advanced network funcionality, but when i do this i receive this error:
Fallied to disable RNDIS to use serial.
nobody can help me?
Damn
im going be crazy.
if i use internet sharing and conect the pda with notebook all works fine.
Pc find the rnids device and i can go to internet.
But if i try to sync the pc dont reconize the ppc...
welcom to the VISTA world
I've had nothing but issues with Vista and WM6 on my Hermes.
The few things I can suggest.
1) As you say Disable the Advanced networking....
2) Connect directly to a USB port, not through a hub.
3) Try soft-resetting your phone between connection attempts.
4) Remove associations between Vista and your phone.
I find that the first time I connect it everything's good, but on subsequent attempts it's hit and miss.
If you are using vista, there's an update for Windows Mobile software on the microsoft website.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
you need to install 6.1 for it in order for WM6 to work with vista.
Cheers
nitrocell said:
If you are using vista, there's an update for Windows Mobile software on the microsoft website.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
you need to install 6.1 for it in order for WM6 to work with vista.
Cheers
Click to expand...
Click to collapse
If he is using the same version of WM Device center on both computers and i am assuming he is, then i doubt it will fix the problem by downloading the latest version as i have that version installed on both my pc's.
I had the same problem, where windows just detected the device as an unknown device and therefore wouldnt let me sync.
right click on my computer and click manage, then plug in your device and see if you have any unknown devices appearing if you do right click on it and click uninstall then unplug the device and wait 10 seconds then plug it back in, this solved it for me. Although i still have to do this every so often. But at least it allows me to sync with both my pc's
Hello
I've got a problem. I want to flash my ROM to WM6.5.
I connectet my Phone with Vista over USB-Port.
The ROMUpdateUtility.exe start the GUI.The phone disconnect from Vista and the Install GUI shows me after few seconds the ERROR 260, that my Phone ist not connectet.
On my Phone I see the three coulored Monitor. On the left lower site is written "USB".
I tried to hold the connection with Vista ( i startet the Camera or other Applikation ) but the same problem.
Whenever i start the ROMUpdateUtility.exe the same. Disconnect and never connect again.
What can i do, that my phone stay connectet with Vista, so the Install GUI can make his work?
thx AcidC ( and sorry for my bad english)
run artemis uspl first
remove any sd card if u have
and then try it
Hi,
we tried with and without microSD card and or sim card.
The real problem is the connection which is interrupted and doesn't rebuild.
Independent of trying to flash the WM6.5 or USPL.
Silly question, but you never know..Do you have Windows Mobile Device Center installed in your PC and is your device connected to it? It is the "Activesync for Vista". The three coloured screen is normal, it is called Boatloader. After that you should have a progress bar of what you are updating (rom,radio..uspl..etc) on both PC and Artemis. In my case, when i got error [260] it's always because I forget to remove the SD card. I know you already tried this but keep it away from device when you flash.Your problem is maybe about Vista Drivers for Artemis, there are threads concerning it. Before you investigate further,try to install/reinstall Windows Mobile Device Center, change USB port and flash with a freshly booted PC. Hope you'll get the magic.
P.S. USPL flash is ABSOLUTELY THE FIRST THING TO DO!
Workaround: try to flash with a PC running XP
You need RUU for vista
Ok. I tried it again, but like u said, i need USPL and WM6.5 RUUs for Vista. But can u help me? I don't find somthing :-(
I consider myself beeing quite lucky for not having needed this even if I'm on Vista,hope helps for you: http://forum.xda-developers.com/showthread.php?t=337097
Use these drivers for Vista:
http://forum.xda-developers.com/attachment.php?attachmentid=33662&d=1169888879
Yeahhh ... Now it works. Thank U all. And now i understand. I had to update my MobileSyncDriver in Vista. Thank U very much
hello i just get my htc hd2 and i want to install apps and games and do all those stuff that are in this website.. (put android....etc....)
but i cant because i cannot open Windows mobile device center... i have windows 7 ultimate 64-bit OS.... i have tried thousands of methods to make it work and i still cant!!... the WMDC icon appears in the all programs list but i click it and nothing happens... also there is a folder named windows mobile and the C:\Windows... but nothing works!!... i connect my HTC HD2 and run it in Sync mode and in Storage Mode and nothing happens again !
IM SO DESESPERATE!!!
if someone could help me i would be so happy thanks...
if need more info just tell me!
Try a few things-
1-Check to see if you have the latest version of WMDC, which is version 6.1
2-Reinstall WMDC if you do indeed have the latest version
3-Goto device manager and delete your Windows phone from your PC
4-It may be your device, try a hard-reset if that up there fails
5-and finally, if ALL ELSE fails, it may be your USB connector on your phone is bad. We have seen this quite a few times, seems to be a fairly common problem.
One other possibility.... the ugly truth is that I have to uninstall my antivirus program everytime I flash my rom and create a new partnership with WMDC. UGH!! this was microsoft's only answer to the problem. Please try it before you do a hard reset.
for me it never syncs (after a new flash) until i
settings menu all settings connection usb to pc
untick"enable faster data"
if you have connected the phone before doing this, reboot both the phone and the pc and try again.
I was having what I think is the same problem. Try going to setting (the tab in Sense) and select other. There is an icon that says something like usb-computer open that and de-select speed up ActiveSync conectivity or something along thoes lines.
I was able to sync after that.
samsamuel said:
for me it never syncs (after a new flash) until i
settings menu all settings connection usb to pc
untick"enable faster data"
if you have connected the phone before doing this, reboot both the phone and the pc and try again.
Click to expand...
Click to collapse
My would charge when i pugged into the USB, but wouldnt sync. I tried this and and it worked =) THANKS!