I recently updated my TD2 with the TopaT 1.5 Cheetah rom. Since I did that I have a strange problem with activesync. Somehow it does not automatically start when I want to sync using the scheduler.
I setup activesync using a schedule to only sync in the morning 8.30 am.
In order to do that I set the scheduler on peaktimes between 8.30 - 8.35 interval 5 min.
I use g-alarm to turn on wifi between 8.29 and 8.33. (although I think active sync turns on wifi by itself nowadays??)
This used to work fine on my old official WinMo 6.1 rom. But somehow active sync does not start at all! The wifi connection is solid. I use rsshub as well and it syncs in this time interval.
But here is the strange thing. When i start activesync manually (and quit) it does work! Somehow activesync is not working untill I start/exit the activesync program.
I think I solved this to put the activesync shortcut in windows startup, so that after each soft reset it is started automatically. I also use cleanram to clean my mem, which could kill activesync again??
Does anyone have similar issues with activesync? Or does anyone have tips to solve this?
FF666 said:
I recently updated my TD2 with the TopaT 1.5 Cheetah rom. Since I did that I have a strange problem with activesync. Somehow it does not automatically start when I want to sync using the scheduler.
I setup activesync using a schedule to only sync in the morning 8.30 am.
In order to do that I set the scheduler on peaktimes between 8.30 - 8.35 interval 5 min.
I use g-alarm to turn on wifi between 8.29 and 8.33. (although I think active sync turns on wifi by itself nowadays??)
This used to work fine on my old official WinMo 6.1 rom. But somehow active sync does not start at all! The wifi connection is solid. I use rsshub as well and it syncs in this time interval.
But here is the strange thing. When i start activesync manually (and quit) it does work! Somehow activesync is not working untill I start/exit the activesync program.
I think I solved this to put the activesync shortcut in windows startup, so that after each soft reset it is started automatically. I also use cleanram to clean my mem, which could kill activesync again??
Does anyone have similar issues with activesync? Or does anyone have tips to solve this?
Click to expand...
Click to collapse
Clean RAM will close AS.
First of all it would be best to ask your questions and post your comments in the original TopaT & Cheetah thread so others who use the rom can share findings and so the cook can see whats happening
Did you perform a hard-reset after flashing? There have been no reposrts of ActiveSync issues with this rom.
Also why did you flash the 1.5 and didn't go for the 1.7 version?
Hi Patensas, I did perform a hard reset after installing the rom. I installed 1.5 because I heard that the cheetah 3.3R rom was much appreciated and stable. ofc, this will probably also be the case for the later versions of your rom
I circuvented my problem ( I think) by placing activesync in startup folder. I also used the setting in cleanram to start the programs in the startup folder after cleaning. I think this will help my problem. For the rest i'm very pleased with the 1.5 rom so I will wait with updating for a while (I hate reinstalling everything and altering all my settings...)
Thanks for the reply btw, I also posted this in the TopaT thread
Related
Hi
I have upgraded to Activsync 3.7.1 and although the sync works between Outlook and PPC I cannot explore the PPC either using explore on the ActivSync menu or My Computer My Device.
I am trying to install TomTom 2 Maps to my SD card and it is not being regionised.
I have uninstalled and reinstalled and still getting the same. Any anyone else experienced this? I would be very grateful for any ideas on how to sort this.
Many thanks
Matt
An update
I preformed a hard resent on the device and still I cannot explore the PPC. HELP PLEASE.
Matt
So no problems before
So if I understand it right, You didn't had any problems before the upgrade to 3.7.1
That is correct, worked fine.
Make sure you've got all explorer windows closed before syncing.
If you have a previous window open, before syncing none of the windows will display anything - you need to sync and then open explorer
That is strange
I don't have to close any window.
OK. so if you place the machine into the craddle, you won't get the message connecting to.. is that right?
Hi
I do also have a problem with active sync 3.7.1 when I want to sync anything on my PC with my XDA.
I can only explore my device if I don't select contact, mail or something, otherwise my XDA crashes and I do have to do a soft-reset.
Try to have your partnership without any syncronisation... even if it bothers me a lot, I can currently live without syncronisation... hopefully I find the time to investigate this issue.
Does anybody has the same expierence ????
I don't want to do it with try-and-error...
What are your connection settings
Are all the three boxes ticket under connection settings? ( under active sync)
i seem to recall that zonealarm need to let some program get access before i can sync
other software firewall may require the same thing
including windows internal firewall
It worked before with older version so
If it worked fine with the older version, then it must be about settings within the new version (Igues)
When you installed the new version of activ sync, did you also altablish a new full partnership?
activesync hangs @ 91%
been doing wuite a bit of work on both the phone and laptop... no complaints at all.. but this morning AS didnt work.. so i uninstalled and reinstalled it again.. hoping that itd get back to place.. but while installing from CD or HD it stops @ 91%. says wceusbsh.cab file is not being read..! took it to the system administrator.. removed all entries from registry... and modified the evnt viewer as well.. everythng in vain..
the last retort is to take the back up of my comp.. and reinstall OS.. but is there anything i can do to avoid it..?
cherish
Hi All,
Have been using the Dopod D810 in WM5 for a while, syncing using ActiveSync 4.5 worked well, syncs were fast. After upgrading to WM6, syncing became much slower, even if i just chose to sync the calendar appointments.
For example, when i have the D810 connected through USB to the desktop, then I add a simple calendar entry in desktop Outlook, the system starts syncing, that calendar entry is quickly sync'ed ( 0/1 changing to 1/1 then the check mark, this process is fast). However, after this, the system still stays on "synchronizing" for about 1 minute until it finishes.
I have already tried lots of WM6 roms, including the official Dopod D810 WWE rom and many other cooked roms (ax3l, mary, pdaviet, etc...)
Have you guys encountered this problem? and how to solve it?
please... no one has this problem except me?
hardworker said:
please... no one has this problem except me?
Click to expand...
Click to collapse
I have the same problem, but I have no idea how to solve it.
I have the same problem with HTC-P4350 (HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe firmware)
I only have this problem when I choose to sync Outlook Email. When I deselect it, syncing is relatively fast.
Hi everyone, after doing some research online, it seems that its a consensus. Anyone running ActiveSync 4.5 is seeing this issue. I was running 4.2 with wm5 and syncs were lightning fast. I'm not sure if I upgraded to 4.5 or it happened during a windows auto update. 4.5 and wm5 was slow as heck. I tried everything. Reinstalling, hard resets etc, nothing. I upgraded my TyTN to wm6 and same problem.
I've tried posting this problem (others have as well) in the MSFT forums but no replies.
Anyone... HELP!!
it works with me
Hi guys,
I had the same problem with slow synchronization on activesync 4.5, however now my problem is a bit solved. I only chosed to sync calendar, and I installed with activesync 4.5 provided by the HTC (in my case it is T-mobile companion cd). Now it works charmingly. It seems there is some bugs or some optimization made per every microsoft mobile product. I will see if uploading the activesynce of T-mobile will violate the copyright, if not you will see it in the ftpserver shortly.
thanks for the replies. I am now wondering whether installing Outlook 2007 would help for the syncing problem between activesync 4.5 and wm6... ?
And #6, dymlu, I have installed activesync 4.5 and I am now syncing with my d810 in wm5 without problems.
I am using outlook 2007 with active sync 4.5. The speed is still slower compare to WM05 rom. Now i got problem with zonealarm, i need to shutdown it before activesync can sync with my PDA.
same problem here including activesync connection dropping on transfer of large files eg., video file over 1mb
i posted my problem here:
http://forum.xda-developers.com/showthread.php?t=326455
With any hope, MS might make an ActiveSync 4.51 available?
Yes, same here. ActiveSync 4.5 with TMO Wing. Sinking PhatNotes to desktop, the rest of Outlook to my Exchange server. It's just slow, period. RNDIS?
the slow problem does not seem to be related to rndis, even with rndis disabled, the same problem persists. When i just try to sync the calendar events, the "tick" mark next to calendar appears fast, the problem is after that, it keeps on saying "synchronizing" for around 1 minute, apparently doing nothing. At that time, the cpu loading on the trinity seems to be quite high, and it becomes un-responsive.
reading the log files of activesync didn't help much (maybe because i couldn't understand it).
I installed SKTools and in the optimize tab, I made an 'optimize for performance' action, which made several modifications in the registry. (TCPIP packet size ...)
Synchronization is now faster, even if the task has still a priority near critical on the PPC.
SKTools is a shareware and since the modification is needed only once ...
Yes, Activesync is *extremely* slow in my case as well. I am sure that this there is an incompatibility between *Micro$oft* Activesync and *Micro$oft* WM6!!
The reson I say this is because I was using the bundled WM6 and Activesync and the speed was incredibly slow. The speed hasn't changed even now that I flashed a lighter ROM.
It's time for M$ developers to get into work!
Yep, slow for me too. I'm running Office 2007 (under XP), the latest WM6 ANZ firmware and syncing email, calendar and favorites.
Have tried changing various settings, but it's still powerfully slow!
Slow ActiveSync
I upgraded my hx2490 from wm5 to wm6.1 and data transfer is slower than old good 5 1/4 fdd
I have searched the forums and can't find an answer.
I have recently upgraded my M3100 to the official WM6 thanks to the very usefull advice on this forum. I am now running WM 6 on my M3100 using Active Sync 4.5 (Latest) and Outlook 2003 on my desktop.
The problem I am having is that some appointments in my Outlook 2003 Calendar are not being transfered to my M3100. To make matters worse, some appointments appear and disappear at random intervals when I re-sync the device. It has rendered it useless as an appointments diary, which is 50% of the reason why i have a PDA phone.
I have searched extensively on Google and on here. I can find plenty of people experiencing the same problems, but no one seems to have found the answer.
As it is a well reported issue, I wondered if anyone here had a solution?
Regards
Tom
Either downgrade back to what WAS working before, or consider upgrading to a newer version of outlook...
Hello,
I have the same setup you have and have never noticed that behaviour. Well, actually I recently upgraded to Outlook 2007, but I never had problems with the appointments using WM6, AS 4.5 and Outlook 2003. A couple of things you can check:
1. Have you checked the AS calendar settings to synchronize "ALL" appointments?
2. Are you running some rules in Outlook that automatically delete or move appointments?
3. Maybe conflicts between PPC and PC? Is AS setup to automatically overwrite the PC when in conflict or viceversa?
lately i have been having problems with my active sync. i have schaps 4.31 and sc 4.5. when i plug my phone in, the computer says usb device not recognized? what is wierd in the morning everything was fine and now in the evening i am having problems?!?
i would
1 try another usbport
2 uninstall as and make sure to remove all as settings from regedit
and reinstall it
I am new with a touch HD, I had a Himalaya and a prophet before, now a new HD since yesterday. I could sync with VIsa a couple of times, but when I saw that I had synced with 2, I removed both to start clean again, but now I can't sync any more, I always get a message that there is a problem with repllog.exe.
I tried everything. I reset the hard spl I reinstalled my original rom, nothing!! I still can't sync and I don't know any more what to do.
It is very strane that I can flash a new rom, but no sync!
I can sync on windows XP! But I hope to find a solution, coz I want to contue using Vista
eddyve said:
I am new with a touch HD, I had a Himalaya and a prophet before, now a new HD since yesterday. I installed the hard SPL since I wanted to move from an installed Dutch to a WWE version and it worked.
I have a laptop with Vista and WM7, but sync only with WM7 and it worked until tonight. I changed to Vista and it started to sync with Vista, which I stopped because the outlook version was not up to date any more.
Later I discovered that I had 2 pc's to sync, and I removed both to start over clean and then it happened. I can't sync any more, I always get a message that there is a problem with repllog.exe.
I tried everything. I reset the hard spl I reinstalled my original rom, nothing!! I still can't sync and I don't know any more what to do.
PS I used Restore_Stock_SPL_114_2
Click to expand...
Click to collapse
Shameless Bump
Strange, not sure what the problem is. Only thing which comes to mind would be to upgrade vista drivers
Problem solved after flash
I flashed Dutty's V2.3 (after hard spl) and now without changing anything, my HD syncs again!
Same issue --- HELP!
I updated to Windows 7 (clean install on a Dell M1330), and started to get problems with HD freezing randomly when not connected, after I started syncing with Windows 7 - also losing all Contacts data - kept getting message that a change had been made on the server which required me to resync. When I did so, it lost all my Contacts data - this happened several times, so I thought it's time to tackle the issue. Attempted to resolve the problem by reinstalling WWE 1.56 (using USPL). Now I get the same repllog.exe issue, which prevents me from syncing at all. Using Office 2007 suite for Outlook etc. I'm pretty much at the end of my tether with this device now... deleted and reinstalled WMDC, uninstalled, deleted and reinstalled drivers, hard reset and eventually clean reinstalled the HD. No change. I'm sure it's something simple, like both devices trying to overwrite one another - but cannot find the answer yet.
...starting to solve it...
OK. After all this BS, maybe it's not so difficult.
I deleted the relationship (yet again!). Then set up a sync relationship, but with NO items selected. This time, the sync completed successfully and immediately.
(this empties and rebuilds the repllog file)
Next, I repeated the exercise with only contacts selected. Now it syncs Contacts OK.
So I suspect that the problem will be with the email files. Maybe I have to set up the accounts on the 'phone EXACTLY per the previous settings before I try to sync the email to them?
Anyway, I've got contacts data and a working sync relationship, so at least something achieved at last.
...and hey presto. It now syncs perfectly, with everything except Tasks (which I don't use). So I guess it has something to do with conflicting settings between the app on the PC and on the sync setting.
Hope this helps.
Hello,
I searched the forum but no solution...
I upgraded yesterday to the official 1.66 rom (from the first 1.43), all went fine.
However, after the paring and first sync, Leo won't be recognised by AS any longer! (And I had another issue, the original calendar app would not start because of lack of memory it said) Also the Active Sync on Leo would not start.Weired??! I did not put any programs on, just synced with my outlook files (Contacts, calendar and notes).
I did hard reset the device a couple of times, even reflashed the 1.66rom, but leo won't reconnect after first sync.
Any suggestions how I could make the Leo work? I really appreciate as I love the device!
many thanks!!
I had this not syncing issue couple of times after a new ROM upgrade. What I did was, removing all the checkboxes for pairing (contacts, mail etc.) then start to check them one by one starting with contacts. That said, I don't really care about syncing with my computer anymore, as I think Exchange Sync is way better.
What you might want to try as well:
Go to Comm Manager - Menue - USB to PC and deactivate the check-box for ActiveSync's Fast Data Synchronization.
Wording might be different on your HD2 as mine is a German version.
Anyway, this worked for me as my Laptop is having problems with fast USB connections.
steinreich99 said:
What you might want to try as well:
Go to Comm Manager - Menue - USB to PC and deactivate the check-box for ActiveSync's Fast Data Synchronization.
Wording might be different on your HD2 as mine is a German version.
Anyway, this worked for me as my Laptop is having problems with fast USB connections.
Click to expand...
Click to collapse
Thanks! It worked for me!
Fidipaldi said:
Hello,
I searched the forum but no solution...
I upgraded yesterday to the official 1.66 rom (from the first 1.43), all went fine.
However, after the paring and first sync, Leo won't be recognised by AS any longer! (And I had another issue, the original calendar app would not start because of lack of memory it said) Also the Active Sync on Leo would not start.Weired??! I did not put any programs on, just synced with my outlook files (Contacts, calendar and notes).
I did hard reset the device a couple of times, even reflashed the 1.66rom, but leo won't reconnect after first sync.
Any suggestions how I could make the Leo work? I really appreciate as I love the device!
many thanks!!
Click to expand...
Click to collapse
I had this problem a few times, my problems have always been wmdc / active sync rather than leo. Google it and you'll find instructions about un-installation and re-installation.
Solved
Thanks for all the advice!
What I did is I synced the outlook info one by one. All worked well, and I excluded outlook mail and tasks. I suspect that there is a problems with transferring the mail items. For some reason the HD2 does not like it.
In any case the HD2 runs flawlessly now. Thank you!!