Flipz newest radio - Hero CDMA General

i have tried to update to this radio twice now. both times after updating my computer will not recognize the phone after updating to the newest radio... any help would be appreciated

i dont think that has anything to do with the radio so try this....
1.take off any programs for your phone (exda-net, easytether)
2.reinstall htc sync(most current)
3. turn usb debugging on on your phone
that worked for me so maybe it will work for you
edit: i used the search function and came up with this!!http://forum.xda-developers.com/showthread.php?t=654940

Bad--Dog said:
i have tried to update to this radio twice now. both times after updating my computer will not recognize the phone after updating to the newest radio... any help would be appreciated
Click to expand...
Click to collapse
and welcome to the forums bro!

lv2bll said:
and welcome to the forums bro!
Click to expand...
Click to collapse
thank u very much

After updated to this radio, I've experience buggy USB connectivity (where if I start to charge it, the device will [sometimes] think it's connected to a usb device, after unplugging it will not detect it's removal).
I've also had the touch screen flip out, where it will not detect my actions at all. The way I fixed this was to connect to a machine where it then started to respond again...
Anybody else experience this weirdness???

AboveUnrefined said:
After updated to this radio, I've experience buggy USB connectivity (where if I start to charge it, the device will [sometimes] think it's connected to a usb device, after unplugging it will not detect it's removal).
I've also had the touch screen flip out, where it will not detect my actions at all. The way I fixed this was to connect to a machine where it then started to respond again...
Anybody else experience this weirdness???
Click to expand...
Click to collapse
Haven't head that one before. Have you tried another cable? That sounds suspiciously like a cable or USB port problem to me. The radio shouldn't have any effect on your USB connectivity.

sorry for the delayed response -
I used various usb cables and experienced this. The way i worked around this was to use ferrite insulated usb cables only and cut the green and white cables on both ends for the cable in my car. It seemed like the phone didn't like to detect and undetect devices often - all is well again.
Sent from my MatrixROM using the XDA mobile application powered by Tapatalk

Related

blackstone usb problems

hi, need help. posting from hd soi'll keepit short. phone won't connect via usb to laptop. keep getting usb device has malfinctioned.... any ideas? im away for the night and can't tether phone to laptop so no internet
jaxouk said:
hi, need help. posting from hd soi'll keepit short. phone won't connect via usb to laptop. keep getting usb device has malfinctioned.... any ideas? im away for the night and can't tether phone to laptop so no internet
Click to expand...
Click to collapse
chnge the port or try a different cable..
MOD EDIT
Moved to general discussion as not related to rom development
cvchetan said:
chnge the port or try a different cable..
Click to expand...
Click to collapse
Tried all that mate, ........ At least I learned to flash from the memory card last night LOL,......... seriously though think its broke, its doing the same on 3 different computers with different leads and a flashed a new rom too
Out of curiosity is it charging through usb? I understand you get a connection error but does the status light turn red to indicate it's charging?
Hey
Not sure if this is relevant.
Im using Windows 7 and found that when I plugged my device in, the driver would fail.
If you went START => Printers and Devices, you should see a "storage device" with an exclamation mark. If you right click properties and uninstall the driver, then unplug and plug the HD back in, it picks it up and works till you next remove the device.
This happened with me constantly till I flashed my phone with another ROM, now it seems to work fine???
Hope that helps??
I have exactly your same problem; I've tried with three different computeres running or XP or Vista without any luck; hard resetting my HD several times, changed ROM but with no luck at all; USB now seems to be able only to charge my device. Searching with google I saw some others had this problem but still was unable to solve that issue.
Hope someone will provide us the INSPIRATION to make it work again!
well sounds very much like it's a hardware problem
as in the type one can only hope to fix by replacing the usb connector from the pcb
This likely won't fix your problem, but it's still worth a shot. In the PC to USB menu (different places depending on ROM), I believe the default (especially in the new roms) is set to activesync. This might not play nice with certain PCs that don't have the drivers and maybe aren't allowed to dl new ones. So try to set that to the Hard Drive/mass storage option and see if it helps (no drivers necessary then).
Good luck
thanks but already tied BUT with no luck....dead....only charge available....I even tried deactivating the charge device when connected option, the option work but not the connection......
Ive never had this problem with my HD but have had the problem with many other USB devices, usually its caused by a corrupted USB Driver Stack, and the usual way to fix it is to uninstall the driver and reinstall it, if that dosnt work i would suggest this:
1) Plug in the HD
2) Find the malfunctioning driver and unisntall it
3) Uninstall ActiveSync
4) Install Active Sync
5) Try the HD again
However, because this is happening to multiple computers have you considered the fact that your port on the HD may be dirty, use a cotton swap with an alcohol based cleaner (you can use acetone, but be careful not to touch the plastic parts of your HD it will probably eat it).

Need to update ROM but usb not recognized!!!

I have a TMO HD2 US version. I am running 32-bit Win7 Ultimate with WMDC 6.1 I can sync the phone with the bluetooth on. I could have the factory TMO usb attached it will charge but not recognize the device. I attempted to update the latest OEM ROM and it just got to the multi color bar screen.I have tried the device on several other pc's with no luck...Windows 7 32bit,XP SP3,no luck. What gives is there a way I can update without the usb cable? Any input would help. Thanks in advance.
Here is a link to my tutorial on how to flash via the SD Card.
Have you tried a different cable? If there is a problem with the phones USB connection, take it back and have it replaced.
whenever you plug in the phone it comes up with 2 options to either connect via active sync or use as mass storage. could this be the problem? hope this helps
Thanks guys!
I am going to try another cable first...i traded my... need I say... iPhone for the HD2 that I have now. I must say its different.I am definitely not happy about the sync issue.MS,TMO both are claiming they have not had that issue. I doubt that TMo will repair or replace a second hand phone purchase. :-(
try restarting your computer and phone, I occasionally have this problem as well, that seems to fix it
It was the cable!!! The T-Mobile
The T-Mobile micro usb cable is JUST FOR Charging. I picked up a data/charge cable at Target for around $15.Problem solved. Many thanks for the replies.
K9Healer said:
The T-Mobile micro usb cable is JUST FOR Charging. I picked up a data/charge cable at Target for around $15.Problem solved. May thanks for the replies.
Click to expand...
Click to collapse
I use it just fine for data all the time on mine I think you just happened to get a bum cable with a bad data pin connection somewhere....it's not unheard of with HTC devices.
K9Healer said:
The T-Mobile micro usb cable is JUST FOR Charging. I picked up a data/charge cable at Target for around $15.Problem solved. Many thanks for the replies.
Click to expand...
Click to collapse
My cable works just fine for data and charging both. I didn't know that different types even existed
I'm heading to Target now to see if I can find an extra cable though, everywhere else is charging $19.99 and up (the Shack wanted $34.99!).
Nippon Labs Black 6 ft. Micro USB Cable A/Male to Micro USB Cable B/Male Model USB-6-Micro $7.69 with free shipping.
sirphunkee said:
I use it just fine for data all the time on mine I think you just happened to get a bum cable with a bad data pin connection somewhere....it's not unheard of with HTC devices.
Click to expand...
Click to collapse
I have the same problem, it used to give me the options to sync and view files, now out of now where nothing, just charges but computer wont see the phone.
rysky007 said:
I have the same problem, it used to give me the options to sync and view files, now out of now where nothing, just charges but computer wont see the phone.
Click to expand...
Click to collapse
Well I would say this is the best place to start then...
-Different USB port
-Different computer
-Different cable
If you had already done the first two, then it's obviously worth trying the last
sirphunkee said:
Well I would say this is the best place to start then...
-Different USB port
-Different computer
-Different cable
If you had already done the first two, then it's obviously worth trying the last
Click to expand...
Click to collapse
Found the fix, not sure how it will work on Vista or 7, but on xp, if you have set on your phone to default always auto connect, you then have to manually activate the phone in driver details under properties of "mycomputer" then device manager

usb connection f***ed

Hi guys!
My device doesn't connect to my PC anymore, can only charge. The PC gives me a USB error and that's that. No more flashing! aaaargh....
As it still charges I suspect a software error, indeed hope for it. Any ideas?
Cheers
mick1475 said:
Hi guys!
My device doesn't connect to my PC anymore, can only charge. The PC gives me a USB error and that's that. No more flashing! aaaargh....
As it still charges I suspect a software error, indeed hope for it. Any ideas?
Cheers
Click to expand...
Click to collapse
I have the same issue m8. Have done for several weeks now. No idea whats wrong. I was hoping to flash magdlr via sdcard and hope that would sort it out, but can't. I am also having other issues now too, e.g: excessive battery drain within winmo. When you turn screen off in winmo, it comes straight back on. Poor reception now (with any radio) was working fine before.
Android is now suffering too, poor battery drain(more than normal) poor signal.
Seg
Too bad. None of the other issues with me, though. Tried reflashing from sd, successfully, but no effect on USB, same for bootloader.
you need to give us more info on problem, what error do you get?, does xp try to install usb drivers when you plug in your phone?
Have you tried uninstalling and reinstalling your USB drivers / use another PC, cable etc?
Hi
Tried 2 PCs, a Win7 and Ubuntu. Ubuntu just doesn't see anything at all, W7 says a broken device is connected and refuses to proceed. Will do one more experiment and report back later. Thx for your interest
doesn't sound good to be honest. You could try flashing your ROM using your SD card though in the hope it is a ROM problem.
Sounds like a hardware problem to me. Have you tried a different usb cord? If that isn't the problem I'd make sure there aren't any damages prints in the phone's usb port.
Those are the most likely, it's rare that an internal hardware problem would only break part of the usb port
Sent from my HTC HD2 using XDA App
Hello at last some one I can help.......Maybe
I had the same problem, Mine also kept on trying to put me in car kit mode and turning loude speaker on. I think the problem started when I sat on my phone while it was charging. It some how shorted the USB in side the phone and I had to get it repaired under warranty. But.... if you havent got the same car kit problem try really blowing inside the USB normally one of those air cans ive heard has done the trick.
Cheers
Baker0
Hi guys
As stated earlier I reflashed off sd, still charge only. Will try one more thing with the W7 PC. Oh, well, no NAND for me...
If you've updated your antivirus or flashed a new ROM, you may need to uninstall your antivirus, connect via usb, and see if your phone is detected by your PC and WMDC. Then, reinstall your antivirus.
Yes the antivirus thing kind of worked.. and btw go for ur stock rom...
Sent from my HTC HD2 using XDA App
have you considered the usb cable. it could be malfunctioning ! try another usb cable. blackberry's usb cable should work just fine.
Hi
Yeah, will have to try cable first, then stock ROM, possibly.
So it was the cable! Whew!

USB Problems Since Upgrade to 2.2.1

Since upgrading the Galaxy S to 2.2.1 which I absolutely love - must faster than anything previous, sleek, really well done, I've just noticed for the first time that my USB doesn't seem to work.
The computer sometimes sees it but just says the device is malfunctioning, the phone sometimes sees the PC and gives a menu for "ask on connection", but Windows just does not know what this device is at all.
Suspect I may have to reinstall the drivers fully in Windows, remove it completely and try again, if it actually showed up as an unknown device in Device Manager.
I do need to try another PC and cable just in case, but this is what Im having at the moment in Windows:
USB Device Not Recognized
One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.
Click to expand...
Click to collapse
And the Phone is currently not detecting any connection.
Any thoughts?
Cheers
Simon
I would go with a windows problem and remove the usb drivers/Kies .
Followed by fresh install .
jje
You can find a link to the usb drivers in my signature.
I think its a little more problematic.
I've tried another computer, another OS and another cable no joy.
I've installed aLogCat and Im getting:
Intent Action android.intent.action.ACTION_POWER_CONNECTED
Battery charging.plugType = 1
AC Charge
In MtpReceiverandroid.intent.action.ACTION_POWER_CONNECTED
Battery charging.plugType = 1
Not of USB charging. Dont lauch MTP APP
Click to expand...
Click to collapse
I've done a quick search on this. Hopefully this is as simple as doing a factory reset and format the internal sd.
If not, then Im off to a samsung service centre I think.
Any further thoughts?
:-(
Factory reset the phone, but the USB port still is not working. Charges fine, but don't connect over USB to the PC.
Can it be in debugging mode. Try to switch between mass storage and kies.
Probably you have checked that already..
Sent from my GT-I9000 using XDA App
the same problem from me i tried all but the usb is not working at all. I flashed kernel , i flashed rom but nothing .
Now i am looking to install untouched rom in order to give it to service but when i am trying to flash from recovery i get an error . Any suggestions?
This may sound dumb, but it could be the USB port acting up (loose connection). Try wriggling the cable around or use a different port.
alumine said:
This may sound dumb, but it could be the USB port acting up (loose connection). Try wriggling the cable around or use a different port.
Click to expand...
Click to collapse
I test the usb in all the modes (recovery and download also). I used different computers but the same thing
alumine said:
This may sound dumb, but it could be the USB port acting up (loose connection). Try wriggling the cable around or use a different port.
Click to expand...
Click to collapse
Right, I've tried all available USB ports, two different computers, two different OS's. The phone just does not register a USB data connection. It only recognises AC charging according to the logs.
I think I have a broken USB port on the phone as if I jam the connector in at an angle on the phone, it sometimes registers the data connection but its far too unreliable.
Development mode don't work, Kies, Mass Storage etc... anything. Nothing works.
Factory reset doesn't make it work.
I can't even flash a new ROM as the phone is not detected in download mode.
I've got the phone booked in at a Samsung Service Centre now. I've seen a few webpages referencing corrosion. I tell you what though, this phone has been protected way way more than my old N97. I've had so many phones and not one has suffered from "corrosion". So let them just try and say it's my fault. Im ready for em.
sjdean said:
Right, I've tried all available USB ports, two different computers, two different OS's. The phone just does not register a USB data connection. It only recognises AC charging according to the logs.
I think I have a broken USB port on the phone as if I jam the connector in at an angle on the phone, it sometimes registers the data connection but its far too unreliable.
Development mode don't work, Kies, Mass Storage etc... anything. Nothing works.
Factory reset doesn't make it work.
I can't even flash a new ROM as the phone is not detected in download mode.
I've got the phone booked in at a Samsung Service Centre now. I've seen a few webpages referencing corrosion. I tell you what though, this phone has been protected way way more than my old N97. I've had so many phones and not one has suffered from "corrosion". So let them just try and say it's my fault. Im ready for em.
Click to expand...
Click to collapse
Try cleaning your phone usb port. A guy named omersak had the same problem, and he had solved it. Search for the thread started by him, and how he has solved it.
I hope you can solve it without going to the service centre. And good luck.
Sent from my GT-I9000 using XDA App
Definitely trying that first - thank you to all the people that have been doing the investigation.
It sounds to me like Samsung have got a bad batch of USB connectors that should be replaced under a factory recall.
I don't use mine in a shower, or sauna, or anything like that, I don't even use it in the rain.
The closest it gets to any humidity is being in my shirt pocket from time to time.
Im going to get some meths or something like that and some thin paper and see what I can do with that. Im just off to Homebase!
there are similar problems on the galaxy 3 series where usb suddenly stops working. the following solutions seem to work there:
1. dial *#7284# to open "PhoneUtil"
2. in USB section, switch to modem, and then switch back to PDA
if that doesn't work: reboot into recovery and select "wipe cache partition"
*hth*
I've tried both of those before I start splashing the methylated spirit around. Still no joy.
Wipe Cache don't work, as well as wipe data/format sd/restore factory defaults etc.
I think I've got a 100% hardware fault.
@OP,
I am terribly sorry about your case. Looks like you need to make that trip to the service centre.
At least you have tried out every possible means known.
Sent from my GT-I9000 using XDA App
Also tried the meths. No good. :-(
The USB just started working yesterday. Still a bit intermittent, but when it gets a connection, it maintains a connection.
I've just ordered some isopropyl and a gold plated USB connector to be on the safe side
Hi everyone,
To sdjean: maybe you could read the post I sent a few minutes ago:
forum.xda-developers.com/showthread.php?p=12593413#post12593413
It might explain why your usb data connection does not always work ...
Regards.
I have a Samsung GT-I9000B and I cant use it using USB.
I have 2 usb cables, I am able to find my friends phones.
Now I cant change rom cause odin cant find it too.
Alog cat shows:
E/MTPRx ( 4020 ) Battery charging. plugType = 1
E/MTPRx ( 4020 ) Not of USB charging. DOnt launch MTP APP
Any suggestion?
I'm not an Expert but 2 hints from me:
1. If you have'nt tried yet: Install usb-drivers on pc new and then connect your phone and wait until drivers are installed to your phone.
One times this way worked on my i9000.
2. Look for a zipped rom on xda which you can directly download and install from sd-card.
Sorry, I know my English is bad.
Sent from my GT-I9001 using xda premium

Touchscreen not responding

So whenever I plug my phone into the computer via usb the touch screen stops responding completely or will "register" a touch in a random spot in which I have not touched. I'm running windows 7 and I heard that I need the latest drivers to fix this but I checked and my drivers are up to date. Anyone have insight on how to correct this problem?
Commonly caused by 'noisy' electricity. Try a different cable, port, PC, etc. to figure out which is the problem.
Will do thanks for the tip. Will reply after testing.
Edit: So the usb port was 90% of the problem it works almost all the time now. Unfortunately I only have one cable right now to try. Thanks for the tip
it is also recommended that you use a direct usb port on the pc and not a hub.
Yea. I only have a laptop which is getting old so I don't know but the USB ports rarley work now anyway.
Sent from my DROIDX using XDA App

Categories

Resources