Database Users

Skype (or musik) through bluetooth - it works

go to hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
when activating voicedial from your headset (press connect button at the headset 2 sec.) it diverts all audio to the bluetooth.
works also with musik.
pressing the button again it disconnects the bluetooth and the main speakers are active again.
in this case the original voice dial does not work anymore until you change the value back to 1.
for me a good solution because i don't use voice dial and prefer insted skype and headset.

Very good tip...will try that!
Cheers...!

Works on QTEK S100 with Jabra Bt 250 Headsets?

Do you happen to know if the BT specification of the EXEC allows it to transmit stereo audio? Say from a mediaplayer to a BT car kit?
If so, that would send me over the edge and Id have to buy a BT carkit!

...ohh, on 2nd thoughts, it would also depend on the bandwidth too. Anyone know what sort of frequency range BT stereo may be limited to?

for stereo output is another reg.hack needed i think. because pushing the voicedial button at the handset it activates the bluetooth headset profile for listening to the voice but voicedial doesnt start. so you can use it for normal micro and loudspeaker.
maybe anybody knows how to activate in this case the "high quality audio profile" by editing the registry instead of "headset profile"?

Great job, The sound (in music) is good ? i tested this but the sound wasnt good.... I think my headset isnt good for music.

yes it depends on the bluetooth profile. for good quality "high quality audio" (A2DP) profile is needed.

blueangel
would this work on a blueangel running WM5?

gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice

hdubli said:
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
Click to expand...
Click to collapse
No it does not work in QTEK s100....

Works -but not great
very tinny muffled sound on my moto HT 820, was hoping it would work as well as the bluetooth stack update for the magician.
Sound does come out in both ears on my stereo phones. but I dont desire to listern to the tinny sound.
Still great find and discovery. Just hope someone can progress it to A2DP asap.

sorry, but can anybody tell me how to edit the registry in WM5? I never did it before. What tool do you guys use? Is it something free?
Thanks.

I used PHMREGedit
Here's the link:
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
andyes....it's free.

Tried it with my BT200
I know the registry works....but cannot get it to play on the headset.
It works...becos upon pressing the phone button on the head set for 2 sec, the audio comes from the handset. On redoing it again, the audio goes off from the handset.

Mine is working fine. I really like the way its now.
Thanks a lot.

Ooops....
my Bt200 wasn't working. That's why there was no audio coming from it.
Need to figure out why there is no audio coming from the headset.
Sigh another problem!
So basically, the registry works.

Im using Total Voice COmmander and it works with WMP.. No need to install another software to play music thru BT.
I just press my Jabra headset twice and it goes "Say Command".. then I say "Play a music"..
Sometimes it's stubborn and Calls someone or Says "Today you have no Appointment" but I guess with a lot of practice, my Dopod understood what Im saying and played me a song.. Now, Im having trouble with my Dopod catching the title of the song i want it to play. I've placed voice tags on the songs and 50% of the time, my dopod got it right.. got to work on the other 50% though..

VC 1.6 announcements over BT Headset

I know this has been covered a bit but I have a quick question. MS is saying you need to have AKU 3.2 to get VC to announce caller's over your BT Headset. Has anyone found a simple way to make this work on an earlier ROM. Lately I've been running mostly Molski's ROM, but I dabbled in Faria's 3.2. I swore I had BT working totally with a 2.26 ROM, but am I on crack?
I liked Faria's 3.2 but I was missing too many calls. Is there any way to upgrade just teh BT in an older ROM to make this work. (I'm sure my inexperience shows in this question. If its impossible to do, just say the word and I'll patiently wait for a new 3.2 or 3.5 ROM or just forget about this)

I have two answers to your question.
The first is use the A2DP hack found in this forum and get a stereo bluetooth headset. The iTech Clip R35 or S35 both come with the two headphones; one with only one earbud, so you aren't covering both your ears. When you have a stereo bluetooth headset, all sound, including the calls from MS Voice Command are redirected to your headset.
The second is use the program found here:
http://www.pdaphonehome.com/forums/...luetooth-headset.html?perpage=20&pagenumber=1
It basically redirects all sound to bluetooth (probably a cheaper and easier fix); I haven't tried it yet, but it seems like it might be the solution you are looking for.
I also liked having the feature of calls announced through bluetooth, but it never did seem to work. I have been meaning to download the program from the site, but just haven't gotten chance. If you try it, let me know if it works.
Thanks.

I wonder how hard it would be to get that little program to run automatically when connected to a head set

yeah theres nothign cooler than wearing a stereo headset while driving. Thanks but no thanks.
I've used BT audio with v1.5, and it wasnt for me. i still use it to listen to podcasts via my headset on occasion though.
The nice thing about 1.6 when it was working (mist have been with Faria's ROM) was that I didn't hear my normal phone ringtone through the headset. It rang like normal through my headset, but it would announce the callers name. Its a cool feature.
edit: I must have been wrong. It does divert the ringtone through your headset as well. This gives me hope that I can work somethign out using BTAudio.

Yeah it is a cool feature. You can go to the notification settings in voice command (Settings -> Personal -> Voice Command) and change it so that notifications are done when bluetooth is available (the second radio button). If the notifications cannot sound through your headset, they will come from the phone speaker so you will still be able to hear who is calling without looking at your phone. Doesn't really help if your phone is in your pocket or if you can't hear it, but I guess its the next best alternative.

I have a cooked T-mobile 2.26 ROM and use MS VC 1.6 over my BT205 no problems. I was previously using the original O2 rom and has it working on that too so both an AKU2.0 and an AKU2.3 work fine. To install try this:
remove VC if installed
remove headset pairing
soft reset
create headset pair and leave it switched on
install vc1.6
soft reset
add path string to HKLM\SOFTWARE\OEM\VoiceCommand\
i.e. \Program Files\Voice Command\VoiceCMD.exe
soft reset
then try the button on the headset a few times
Riptos

I'm not having trouble using BT with VC. I want the Incoming call announcements to come over BT.
I installed Farias 3.2 and it worked, but I decided its not a huge deal. I'll try playing around looking at some of teh links here and see if I can't work somethign out. Thanks everyone.

I would also love for voice command 1.6 to announce incoming calls to my bluetooth headset. Interestingly, low battery announcements come through the bluetooth headset, but not incoming calls. Hmmm. Any suggestions/luck getting this to work?
Best,
MJB

VC Caller ID over Bluetooth
I think you all will enjoy this hack

where did u find this hack from? is it reliable?

jacob-mda said:
where did u find this hack from? is it reliable?
Click to expand...
Click to collapse
What? You don't trust someone who's first post is somethign to put on your phone

hell no considering this a brand new mda tmobile just sent me lol..

jacob-mda said:
hell no considering this a brand new mda tmobile just sent me lol..
Click to expand...
Click to collapse
Just wanted to let everyone know I tried it out today and it works as expected. Phone audio gets redirected to BT headset on incoming calls.

but does the ringer get re-directed also? cuz if so thats DAMN ANNOYING!

Well I dont mean to sound condescending to a "senior member" cuz im just a junior but did it cross your mind to select "none" as your ringer? Oh, Btw everyone, your welcome for my fantastic little file

What exactly does the file do???

I had troubles with VC 1.6 at first, but now it seems to work OK. Maybe I accidentally followed Riptos's instructions. Don't know.
Also BTAudio is working to redirect audio when I want that to happen, since VC now closes the audio after it finishes.
The only remaining minor glitch is that after giving a dial command, the little simulated dialing noise comes over the phone speaker not the headphone. So if the phone isn't right by, I don't always know whether it has dialed or not.
Any suggestions?

I tried the CallerID program. It works just as described. The only thing is that is takes up ~443.48 KB at startup. I just installed it so I don't know if it increases after a while.
I have a question. If I understand everything correctly, with a AKU 3.2 ROM this CallerID program isn't necessary if I want to get Incoming Call Announcements over Bluetooth. Right??

Has anyone gotten VC 1.6 to announce incoming calls over a STEREO Bluetooth headset? Seems like the discussions have only been for a hands free device. Anyone?

I don't have a 3.XX ROM and Voice Command notifications work on my stereo bluetooth headset without the program because I think wtih stereo bluetooth, all sound is redirected to the headset. I didn't do anything or change any settings, it just worked. I obviously have the A2DP hack installed, but that's it.

Redirecting TRINITY sound to handsfree

After reading very long threads about this issue, many changes in the registry and some full pda restores, I haven´t found the way to redirect all the sounds to the handsfree in my TRINITY.
Has anyone managed to make BTAudio or any other program work with a Trinity?

I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.

2 Types of Redirect
One is with A2DP where the bt device is compliance to it. I do not have one but I believe it will work fine.
Another way which I am using is via the Handsfree Voice Command channel. When a voice command software(Such as Cyberon Voice Speed Dial) is installed and when the recognition is triggered(usually by a button on headset), all audio is redirected to the the headset.
So the trick is to keep this redirection longer.
This is can achieved by changing two registry settings.
- Change the duration to something longer, like FFFF.
- Invalidate the voice command software execution.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"VoiceCmdDuration"=dword:FFFF
"Path"="\WINDOWS\invalid_sddialer.exe"
With that, I have lost Voice command via my headset but I hardly do VC at all, and if needed, I had associated one of the button on my dopod to launch VC but I need to speak into the phone instead.
Not sure if this is the best way but it's the only way I know of untill I figure out other.
FYI, I'm currently using Dopod D810 with lvsw ROM (http://forum.xda-developers.com/showthread.php?t=299771) and a Motorolla H700.

anonimo said:
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
Click to expand...
Click to collapse
Hello,
I agree with this.
I had not been able to get the Trinity to redirect audio to a sony HBH-IV835 heandfree device.
Since I've change for a Sony DR-BT20NX headset with AD2P profile it's working like a charm. No more registry hack or software needed.
Then registry hack only concern improvement of audio quality (bitpool and so on).
Sadly i'm not able to use real stereo (replace the use of joint stereo) because it's generationg a slight annoying hiss sound.

Is this still the status, also with WM6?
I can't believe it's not possible to redirect some kind of way like I've been reading in the Tornado treads.

Yeah, I'm also can't redirect all sound to my headset (Plantronics Pulsar P590) by one click or by launch some program. Every time I need launch BT Settings, open Devices tab, tap'n hold on "590Plantronics", and select "Set as hands-free" or "Set as Wireless audio".
Can't find other ways to do it - no registry hacks, no other...

Does this help maybe?
http://pocketland.de/product.php?prod_id=36311
I did not test it yet...

No, it doesn;t work too... All discussed programs (BTARouter, BTAudioNav, BTAudioToggle) are just redirect phone calls to the my headset. No audio output at all (headset icon doesn't appear).

Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.

clinton said:
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
Click to expand...
Click to collapse
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...

peon said:
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
Click to expand...
Click to collapse
I saw a lot of different registry hack around here..
The one thath works on p3600 is?
I've tried a lot of but no one works.
I dont't need voice dial so it can be good.
I use my p3600 with a BT Helmet.. so I'd like to listen to tom tom inside..
thanks a lot.

Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.

jaaphooi said:
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
Click to expand...
Click to collapse
But my bike helmet is not A2DP compliant so I canìt use it.. :-(

Still no solution?
Hi you all,
is there still no solution for the Trinity?
I am actually experiencing the skipping problem, but I would be half-glad if I could redirect audio in mono to the headset.
Please advise!
IsiT_de...

Get headset that supports A2DP profile and it works fine. I have Plantronics Voyager 855 stereo, and it works flawlessly in mono or stereo mode with modifying any registry hacks. Music sounds awesome too with this headset, just like my bose earbud phones.

Possible to send all audio over bluetooth?

I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,

i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do

xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.

My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....

Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,

yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!

I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(

it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation

Works fine with Jabra 3030, all audio over it, music, system sounds and calls.

Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?

I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,

its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)

I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.

Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.

I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?

I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....

the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.

Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.

Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.

Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?

Adventures in Bluetooth

Ok, I have the T-Mobile Tab, I have Skype and Google Voice working via 3G and Wifi but here is the issue...
I have tried 4 different wireless bluetooth headsets and they all react the same... They connect and pair with no issues BUT...
When you place a call the other callers voice is routed, as it should be, to the BT headset, however, my voice is not routed through the BT microphone and it uses the Tab's built in mic...
This is pretty unacceptable as you can imagine and pretty much defeats the purpose of a BT headset...
Any ideas, thoughts, or help on how to get the Tab to route voice via the BT headset as opposed to it's built in mic would be MUCH appreciated!!!!
Thanks in advance!

This was kind of discussed in another thread. Current thinking is that they modified the profile to not support a mic on the BT headset.
Until someone creates a patch, update or a custom rom, there probably won't be a solution.
This is the price we pay for getting the new toys right away. Once the dev's start rolling out the mods, I am sure it will be corrected.

dougvan said:
This was kind of discussed in another thread. Current thinking is that they modified the profile to not support a mic on the BT headset.
Click to expand...
Click to collapse
Whilst this may be true for US Tabs, FWIW bluetooth headset profiles do not work with Skype on Euro Tabs either.
I've been trying it out this afternoon, and whilst my headset (well, wristset to be totally accurate) works fine for regular cellular calls, when I try to use Skype I only get audio out.
If I check the options for the connected device in the bluetooth settings, I have both Media and Phone profiles checked. If I uncheck Media, I no longer even get audio out with Skype (though regular phone calls still work ok on the headset), which shows that Skype is not using the Phone profile at all.
So, I suggest you look at the options for your bluetooth device to see if it even has the option for Phone. If it does, it seems that the headset profile is still there and it is actually Skype which is not using it.
Regards,
Dave

If you read some of the comments here, it seems that Skype for Android doesn't support bluetooth anyway.
Regards,
Dave

Thanks for the info man. I'll check it out on my Sprint GT.

Wonder if it's possible to put the Samsung Galaxy S BT on the Tab?

It is because the sound of these apps is being routed via the A2DP profile and not Headset provide is you are hearing the sound via the BT headset but the mic used is the Tab's

clubtech said:
It is because the sound of these apps is being routed via the A2DP profile and not Headset provide is you are hearing the sound via the BT headset but the mic used is the Tab's
Click to expand...
Click to collapse
Should I try a BT without A2DP support??
Thanks in advance!

raqball said:
Should I try a BT without A2DP support??
Thanks in advance!
Click to expand...
Click to collapse
Since my headset didn't work with Skype at all with the Phone profile awhen I switched of the Media (A2DP) profile, I doubt a non-A2DP headset will help.
The problem is Skype doesn't use the phone profile.
Regards,
Dave

I dont think its limited to skype either. I tried two other programs last night, neither one had working mic.
Sent from my SGH-T849 using XDA App

BT works just fine within Skype when using it on my MacBook Pro and my iMac.... The only issues I am having is on the Tab...

I wonder if it would be possible to flash or install the euro BT .apk?

raqball said:
I wonder if it would be possible to flash or install the euro BT .apk?
Click to expand...
Click to collapse
Why? Still won't work because the problem is with Skype on Android - it does not use the phone BT profile.
Regards,
Dave

No BT Headset Profile in any of the US Galaxy Tabs
The reason that none of can use their Bluetooth headsets with a program like Skype (or better yet, Line2, which I am a beta tester for) is that the Amrican carriers ripped out the ability to use BT Headset profile. Now some headset (such as te Jabra Stone) uses Audio profile, so it will work with the GalaxyTab, but we definitely need someone to break that an hack in a great fix so that we can get Line2, install it on the Tab, then us Bluetooth Headsets to do our communcating. This because the best (and cheapest) phone/data device in the world at that point. Is anyone working on that?

samtrego said:
The reason that none of can use their Bluetooth headsets with a program like Skype (or better yet, Line2, which I am a beta tester for) is that the Amrican carriers ripped out the ability to use BT Headset profile. Now some headset (such as te Jabra Stone) uses Audio profile, so it will work with the GalaxyTab, but we definitely need someone to break that an hack in a great fix so that we can get Line2, install it on the Tab, then us Bluetooth Headsets to do our communcating. This because the best (and cheapest) phone/data device in the world at that point. Is anyone working on that?
Click to expand...
Click to collapse
Interesting. I am going to pick up a Jabra Stone and see if it works with Skype on the Tab.
Posted from Samsung Galaxy Tab

raqball said:
Interesting. I am going to pick up a Jabra Stone and see if it works with Skype on the Tab.
Posted from Samsung Galaxy Tab
Click to expand...
Click to collapse
Jabra Stone does not work either. Just returned it for a refund.
Posted from Samsung Galaxy Tab

I have the nokia bt503 for a2dp. you need to long press to see option after its connected

Also works with nokia bh-104 but no a2dp and kenwood DNX6160 no a2dp

Dont know if this helps but...
Im able to use my Motorola BT S9 head set as headphones and make Unlocked Skype 3g calls no problem. US Sprint version.

dykefish said:
Dont know if this helps but...
Im able to use my Motorola BT S9 head set as headphones and make Unlocked Skype 3g calls no problem. US Sprint version.
Click to expand...
Click to collapse
And these headphones have a mic built into them? And that mic worked for your Skype calls?