Password reset option missing from HD2 lock screen? - HD2 General

I use Exchange Enterprise Activesync for email, and corporate policy forces the use of a pin.
There is a function to display a 20 digit recovery password in Outlook Web Access that can be used if the device PIN is forgotten.
On my TyTN II (Windows Mobile 6.1) on the lock screen there is a Menu with Reset Password as an option, after selecting this I can specify a new password, then enter the 20 digit recovery password.
However, I can't find a password reset option on the HD2 lock screen. I suspect, from searching on the Internet, that this might be the case with other Windows Mobile 6.5 devices, but can't get at one to check.
Does anybody know how the password reset option can be accessed?

Hey, we are having the same problem with the HD2. There is not a "menu" option on the lock screen.
Anyone figure out how to use this yet?

Same problem :/
Does nobody have an idea?

Related

How to turn off password

Hello all,
How do I disable the password lock from my 8125? I initially set it up when I was synching with my laptop for Exchange email, but now I am using xpress mail and don't want the password lock.
I hope you know the password, if yes then follow:
Start -> Settings -> Password -> (it would ask you the password if it is already set) tab the password -> untick the "prompt if device unused".
Let me know, GoodLuck
Sidd
Sidd,
Thank you. The "Prompt if deviced unused" is greyed out. I'm unable to untick this setting.
But is it Greyed-out with the tickmark ON or OFF??
WIth the tickmark "ON". The long short of this story is that I initially synched up my Exchange email using ActiveSynch. Our corporate policy required this password to be setup. We do not have Exchange SP2, so I couldn't get push email, however I ended up using xpress mail instead to get the push functionality. Now I want to get rid of having to input a password on my device.
Also note that "Password" has been renamed to "Lock" in AKU2 as is also pointed out in the article on all name changes at http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1276&more=1&c=1&tb=1&pb=1
Its seems like either you have to connect/sync with the same email software on which the password had been setup and find the way to remove the password whilst sync,,, OR ,,, the 2nd option is to just Hard Reset the device,,, BUT ,,, Please dont forget to take your backup before Reseting the device. (I can also help you if you want to backup your TXT messages if u want to!)
I am personally using Alpine(XDA-IIi) and I am Hard-Reseting my device every 4-5 months.
Let me know.
Sidd

6.5 lockscreen?

I have 6.5 on my HD and was curious if I could use the lockscreen but without a password so I could keep the slider and notifications, I just dont want to enter a password each time thanks!
the only time you have enter the password, is if you setup the pin function on it, otherwise the slide fuction in wm6.5 works as normal
iky10 said:
the only time you have enter the password, is if you setup the pin function on it, otherwise the slide fuction in wm6.5 works as normal
Click to expand...
Click to collapse
if i do not enter "setting">>"lock" and click the "prompt if phone unused for", the unlock slide to application screen will not appear.
but if choose not to enter the pin, i cannot select the "prompt if phone unused for"
is there a way to activate the unlock slide to application screen but no need to input password everytime??
million thanks.
Forced lock by MS exchange
Yes this is a huge problem. I have the pin lock force on by MS exchange security settings. In WM6.1 this only affecxted when the phone was turned on not everytime it is locked.
This cab (from another thread) removes the lock enforced by Exchange.
Works on my 6.1 and I believe on 6.5 too.
Run it, then go to you Lock settings and the tick box to remove lock is no longer greyed out ...
Alternatively here's the reg setting to edit:
Enable/Disable Exchange Security Policy
Registry Key: HKLM\Security\Policies\00001023
To enable it: Set value to 0
To disable it: Set value to 1
I used similar registry tweak in WM6.1 to get away with the exchange security policy but not working now for the new WM6.5. eg. I can change the inactivity minutes AEFrequencyValue to long enough but still the phone asks for unlock password frequently.
mobiler2 said:
I used similar registry tweak in WM6.1 to get away with the exchange security policy but not working now for the new WM6.5. eg. I can change the inactivity minutes AEFrequencyValue to long enough but still the phone asks for unlock password frequently.
Click to expand...
Click to collapse
I have the Same Problem.
I'm force to have a Password from the exchange security Policy.
I have set the "Promt if phone unused for " to 30 Minutes, but each time the the phone goes to sleep, the Password is asked again.
Did someone have a solution without disabling Exchange Policy or installing S2U2??
Thanks
chemical349 said:
if i do not enter "setting">>"lock" and click the "prompt if phone unused for", the unlock slide to application screen will not appear.
but if choose not to enter the pin, i cannot select the "prompt if phone unused for"
is there a way to activate the unlock slide to application screen but no need to input password everytime??
million thanks.
Click to expand...
Click to collapse
If you disable lock in setting > lock, i.e. untick 'Prompt if phone unused for' and just use slider functionality in wm6.5 you don't need to enter PIN any more.
Install attached cab (Smart Lock) and once installed go to settings > system > smart lock and ensure that both 'wm6.5 new lock' and 'suspend lock' are ticked, then soft reset. Now each time you turn screen off device will lock and to unlock it you use the slider
I installed the Stay Unlock cab and I still have to enter my password when my phone reboots. Until now, for day, it did not ask me for a password after 15 mins of inactivity, but today, it is again asking me for passwd every 15 mins if I don't use the phone. I am not even able to ever uncheck the setting for Lock which turns on requiring passwd - that setting is grayed out for me even after installing the cab. Could someone please throw some light on this? Thanks.
ziggyred said:
This cab (from another thread) removes the lock enforced by Exchange.
Works on my 6.1 and I believe on 6.5 too.
Run it, then go to you Lock settings and the tick box to remove lock is no longer greyed out ...
Alternatively here's the reg setting to edit:
Enable/Disable Exchange Security Policy
Registry Key: HKLM\Security\Policies\00001023
To enable it: Set value to 0
To disable it: Set value to 1
Click to expand...
Click to collapse
==========================
in 6.5 the key is a bit different (policies twice):
Enable/Disable Exchange Security Policy
Registry Key: HKLM\Security\Policies\Policies\00001023
To enable it: Set value to 0
To disable it: Set value to 1
WM 6.5 Company Policy Activated Device Encryption
I recently set up Exchange e-mail on my WM 6.5 AT&T Tilt 2 (Touch Pro 2), which resulted in activating device encryption. Although I check the email box to remember my password, the device constantly asks me for a password.
I've since removed the Exchange e-mail account (I'll go back to synching rather than direct connect as this is too much of a hassle). However, I can't seem to turn off device encryption.
After reading this forum, I've tried the "Stay Unlocked.cab" and the registry settings (e.g., HKLM\Security\Policies\Policies\00001023 setting) to no avail. The "Prompt if Phone unused for remains grey/unselectable.
One thought: When I checked the 1023 key setting it was 0 so I set it to 1. That had no effect. But reading the post 0 = enable so I tried setting the value to 0 and got a message popup: "Exchange server has just enforced security policy required for Active Sync." So something of Exchange is still running or enabled...how can I turn this off?
WM 6.5 Company Policy Activated Device Encryption
Deleting the Exchange connection in Active Sync did the trick. That was so easy I do feel a bit foolish...

How to prevent screen unlock with password?

After installing a new exchange mail account, my HD2 had started to prompt for a screen lock password (maybe a policy issue?).
I did apply one and then tried to remove it (did not enter anything in the password fields and then saved). My HD2 repeated bugging me for a password.
I did set it to 'every 24 hours' .
Now, each time I connect to activesync via USB or after each soft reset, the HD2 prompts fro the password.
Is there a way to provent that? or at least to prevent when connecting via USB to activesync?
Thanks
zolom said:
After installing a new exchange mail account, my HD2 had started to prompt for a screen lock password (maybe a policy issue?).
I did apply one and then tried to remove it (did not enter anything in the password fields and then saved). My HD2 repeated bugging me for a password.
I did set it to 'every 24 hours' .
Now, each time I connect to activesync via USB or after each soft reset, the HD2 prompts fro the password.
Is there a way to provent that? or at least to prevent when connecting via USB to activesync?
Thanks
Click to expand...
Click to collapse
I don't think this is the HD2, it's the exchange server policy, I used to have the same thing and it was hugely anoying, so I got our infrastructure engineer to remove the policy on our exchange. Now I don't need to login each time
Yes, but isn't there a method to inhibit that passcode request?
zolom said:
After installing a new exchange mail account, my HD2 had started to prompt for a screen lock password (maybe a policy issue?).
I did apply one and then tried to remove it (did not enter anything in the password fields and then saved). My HD2 repeated bugging me for a password.
I did set it to 'every 24 hours' .
Now, each time I connect to activesync via USB or after each soft reset, the HD2 prompts fro the password.
Is there a way to provent that? or at least to prevent when connecting via USB to activesync?
Thanks
Click to expand...
Click to collapse
You need to edit the registry on the handset and make the following change:
Enable/Disable Exchange Security Policy
Registry Key: HKLM\Security\Policies\00001023
To enable it: Set value to 0
To disable it: Set value to 1
After setting this value the option to disable the security is no longer greyed out. Once setting this it does get reset again when connecting to Exchange. There is a utility that can periodically check for the setting and remove it found here:
http://blogs.microsoft.co.il/blogs/...curity-policy-for-windows-mobile-devices.aspx

[Q] Read this please, Regarding warning @ Login/google restore

My request is quite weird I agree, but i have no solution . I have enabled exchange sync for my company email id and hence phone is pattern locked. 3 wrong attempts and thats it, it will ask for recovery password(god only knows whats that..!!! itried everything) and then complete data wipe..it happened with me twice..once because of my little nephew and once becaise of my friend..following are my questions, if anyone could help
1. Is there any app/way to display warning/custom message to anyone using my phone during pattern entry/pin entry etc?
2.What on earth is recovery password for Galaxy note..i tried samsung account password, gmail pwd, company email pwd, network pin, 0000, 000000, 1234 etc..nothing worked..hence data wiped out..
3. once google restore worked perfectly and everything was restored. now it simply doesnt download my apps from backup . can anyone tell me exact PROCEDURE for DATA/APP restrore from google backup after a reset.
appreciate your help./
look this on market
Screen lock bypass for screen lock
N for google restore, check setting - privacy -restore backup automatically.
Sent from my GT-N7000 using xda premium
thanks, btw auto restore stuff is checked..but it didnt work
You can always try to unlock it via :
http://www.samsungdive.com/DiveMain.do
It should let you unlock your phone remotly without reset, as you have setup a samsung account.
Do try and post feedback if working or not with unlock pattern.
Good luck
thanks..nope..it doesnt buddy..i tried samsungdive..it asks for recovery password and thats it!!!
mmmmm....
So to setup your exchange account (to be compliant with your company) you had to setup your phone with unlock patern or PIN pattern. It should also had a "device administrator" (try to see in the settings menu, If it is right) to let your company network admin to remotely wipe everythings. So this password recovery might been set by him from the server side. Ask him if he had setup any password for remote wipe or anything else.
Good luck
jayGGjay said:
mmmmm....
So to setup your exchange account (to be compliant with your company) you had to setup your phone with unlock patern or PIN pattern. It should also had a "device administrator" (try to see in the settings menu, If it is right) to let your company network admin to remotely wipe everythings. So this password recovery might been set by him from the server side. Ask him if he had setup any password for remote wipe or anything else.
Good luck
Click to expand...
Click to collapse
yeah..you are right..and i tried callin my IT hep desk..and she just says use your email password, which obviously dint work..by the way app suggested by dr.ketan is good..but im a bit late..
Ok,
I know for sur that your IT has the option for PIN unlock pattern enforcement.
You could always ask to setup again a PIN from their side and use it as your unlock "way". And the device administrator password is alsmost for "sur" not your personnal password from your company ( except If your network admin know all your password and set the same for the device administrator wich sound/is quiet strange).
But almost for sur this recovery password is set from your company side from exchange (ask them to go to the server AD and right click your user, and in the exchange/email tab their should be a "remote device" option or such tab in wich all the options, enforcement and password specific for your account and his phone/remote device access)
Goold luck
jayGGjay said:
Ok,
I know for sur that your IT has the option for PIN unlock pattern enforcement.
You could always ask to setup again a PIN from their side and use it as your unlock "way". And the device administrator password is alsmost for "sur" not your personnal password from your company ( except If your network admin know all your password and set the same for the device administrator wich sound/is quiet strange).
But almost for sur this recovery password is set from your company side from exchange (ask them to go to the server AD and right click your user, and in the exchange/email tab their should be a "remote device" option or such tab in wich all the options, enforcement and password specific for your account and his phone/remote device access)
Goold luck
Click to expand...
Click to collapse
thanks..sure an option for the future!!!
Ok have a look at and forward this to your IT :
http://www.sysadminlab.net/activesy...tivesync-policies-a-complete-guide-what-works
and also try:
http://technet.microsoft.com/en-us/library/aa996351.aspx
and from it for password recovery:
Use Outlook Web App to recover a device password
In Outlook Web App, click Options.
Select Phones from the Navigation Pane.
Select the mobile phone from the list.
All mobile phones the user has configured for Exchange ActiveSync are displayed in this list. To determine the correct mobile phone, use the device name and the last synchronization time displayed in the list of devices.
Good luck
cool..leme try that. thanks a million
jayGGjay said:
Ok have a look at and forward this to your IT :
http://www.sysadminlab.net/activesy...tivesync-policies-a-complete-guide-what-works
and also try:
http://technet.microsoft.com/en-us/library/aa996351.aspx
and from it for password recovery:
Use Outlook Web App to recover a device password
In Outlook Web App, click Options.
Select Phones from the Navigation Pane.
Select the mobile phone from the list.
All mobile phones the user has configured for Exchange ActiveSync are displayed in this list. To determine the correct mobile phone, use the device name and the last synchronization time displayed in the list of devices.
Good luck
Click to expand...
Click to collapse
I tried outlook weboption..here is wat i have.
no option to view password .
Manage your mobile devices here.
You can remove devices that you are no longer using. If you forget your device password, you can access it here. If you lose your phone or mobile device, you can initiate a remote device wipe to protect your information.
To add a new device, begin a partnership with Microsoft Exchange from the device and it will appear in the list below.
Remove Device from List... | Wipe All Data from Device...
hmm..thts because..
Display Recovery Password (Windows Mobile 6 only): This option allows you to access your device if you've lost or forgotten the password. To unlock your device:
Press Menu, and then select Reset password.
The device will alert you that you must select a new password and supply a recovery password, which you can find in OWA. Once you have accepted, create a new password, and then press OK.
The screen will tell you where to find the recovery password and provide a space to enter it. Enter the recovery password, and then press OK.
khan.dharvesh said:
My request is quite weird I agree, but i have no solution . I have enabled exchange sync for my company email id and hence phone is pattern locked. 3 wrong attempts and thats it, it will ask for recovery password(god only knows whats that..!!! itried everything) and then complete data wipe..it happened with me twice..once because of my little nephew and once becaise of my friend..following are my questions, if anyone could help
1. Is there any app/way to display warning/custom message to anyone using my phone during pattern entry/pin entry etc?
2.What on earth is recovery password for Galaxy note..i tried samsung account password, gmail pwd, company email pwd, network pin, 0000, 000000, 1234 etc..nothing worked..hence data wiped out..
3. once google restore worked perfectly and everything was restored. now it simply doesnt download my apps from backup . can anyone tell me exact PROCEDURE for DATA/APP restrore from google backup after a reset.
appreciate your help./
Click to expand...
Click to collapse
Let me tell you this. I also have my corporate email account set in my Note, but instead of using stock email app I am using Touchdown.
That way the corporate does not have any access to you're full mobile, it is restricted to Touchdown.
The regular screen lock is the typical Android function.
Sent from my GT-N7000 using XDA

How to access the security settings on the Domino dm368 smart watch?

This is my first ever post to xda so if I didn't post this correctly please let me know. So where I work they have an app that you can use to check your schedule/hours worked etc. For some reason the app asks for the password for the credential storage before I can use it. I had to look that up online because I didnt know there was a password for it and I'm not 100 percent sure what credential storage is used for. I'm assuming stored usernames/passwords for certain websites? Anyways I found out the password is the same as the 4 digit screen lock password. not a big deal on my phone but on the watch it took me to the security settings menu where I set a screen lock pattern. But now I've changed my mind and don't want the screen lock. I have to unlock the screen to see the watch face I have set. My question is how can I access the security settings menu? I can't do it with my work app. It only took me there because I didn't have a screen lock.

Categories

Resources