I tried to install a Garmin Mobile XT from PC several weeks ago, but it was failed, so I deleted all files and didn't install it at all.
But when I connect my HD2 to PC, it pops up a dialog to ask installing this "Garmin Mobile XT" again (even I click yes last time) , how can I remove it?
Thanks in advance.
i have garmin mobile xt running on my hd2. works great. for some reason it runs on intermidiate gps and not from com4. i dont know why but i do know it works great. you should retry.
Related
Cant see any other person having this problem from my searches and topics here.
I am trying to load tomtom5 from a disc. it is the same one i used in my xda2 but it will not load on my XDA exec.
I have tried to copy to the card and run but that will not work it says not a correct application.
I have 5 and 5.1 update on disc which worked on the xda2.
Neither will load to the Exec
I load the disc to pc select uk then select install but it immediadtely brings up the error message with the send to microsoft option.
Dont understand this as it worked on the xda11.
Any ideas?
Thanks
Clive
(apologies for putting this on news forum originally)
Hi
get the 5.2 update from tomtom, install it, copy the voice files from you
v5 cd to tomtom dir in root "/", copy the maps to your mmc.
it worked for me
was the 5+5.1 known to not work then?
I had the same problems
Could not install from cd either whereas had no problems with my xda2-managed to use updat 5.2 but could not activate software via the gprs connection. ihad to get anew activation code from tom tom. this worked. i don't think version 5 is as good as version 3 and i wish i hadn't upgraded as not only are there more errors on the maps but it takes my new xda a lot longer to connect to the gps receiver.we found loads of mistakes when using the new version 5 on the xda2 in the summer when touring tom tom kept taking us to roads whichwere still under construction and couln't be used. we did tell support about this but i don't find them particularly helpful
creynish said:
was the 5+5.1 known to not work then?
Click to expand...
Click to collapse
my v5 cd crashed the computer when useing active sync 4.x same with 5.1. update....
5.2 installed ok.
I am traying to find out if anyone has the Garmin Mobile XT software/card and if anyone knows if the entire program can be copied to an existing card from the card its on? I just don't want to have to keep switching cards. Thanks
Sure, here's the long thread discussing how...
http://forum.xda-developers.com/showthread.php?t=348003
Is there a place to get it as a download? I was told by garmin I could not copy it to another card from the card that you buy. Also does anyone know about full release? Thanks
No, and the thread contains a description on how to crack you own copy so that you can use it on a different, larger card. I say screw any company that pulls this crap, I use iGuidance v4 and TomTom and any others that don't lock to a memory card. PDA's need these storage cards for many things, and swapping cards in the field, just to navigate is plain goofy.
please someone give a step by step how to install garmin mobile xt on Kaiser/att 8925, i am totally stucked and confused, searched some threads and they are very uncleared. please help.
Im install Garmin Mobile XT to my HTC TyTn II and work very good map coverage is a lot of better than tom tom maps...
_Dejan_ said:
Im install Garmin Mobile XT to my HTC TyTn II and work very good map coverage is a lot of better than tom tom maps...
Click to expand...
Click to collapse
Hi.. how did U manage to get the Garmin Mobile XT to "find" the inbuilt GPS?
I've tried couple of times, it still can't find the GPS...
any other settings that I need to do? thx
1.) Im download Garmin Mobile XT 4.10.40 for PPC
2.) Im download Que(En Unlock All).exe & SW.UNL
3.) all data from Garmin Mobile XT 4.10.40.Rar Im extract to storage card(By card reader) an Im put it into HTC Tytn II
4.) When ask me If I want install Garmin Mobile XT press Yes and when ask you If you want start aplication YOU MUST CLICK NO.
5.) Remove card from phone and put it into card reader then start Mapsource and select which maps do you want export then send it to device and select card reader
6.) When complete than you copy SW.UNL into Garmin folder in card and delete "2577" folder
7.) put card into phone and connet it by Active sync and rename Que(En Unlock All).exe to Que.exe and replace file Que.exe on phone folder Garmin with this new file.
8.) Start mobile xt and setup all setings when search for receiver wait and when ask you if you want stop searching click no. Then must find your GPS receiver on COM4 otherwise try it setup manualy.
9.)if you look map you will see no map and you must first create new route to any adress and then you will see map(Detailed map or any other name)
This work for me and two my friends(one have Fujitsu Siemens Pocket LOOX T830 with internal gps other have Charmer with BT GPS receiver)
i dont kno if its allowed to post this, but if i am violating any rules feel free to remove this link thank you.
That is a Blog that has video along with required files and etc. to use Garmin Navigation. ;D
http://jinxinlove.blogspot.com/2007/12/garmin-mobile-xt-with-non-garmin.html
ok guys..
I managed to get garmin xt to find the built in gps..
but now when I go to info, it's only showing Unlock ESN: XXXXXXXXXX
no more IMEI or device ID..
any idea what is Unlock ESN?
You don't need this Unlock ESN code or any IMEI to work this mobile XT with Que (EN All Unlocked).exe because this que don't look serial of maps and you don't need unlock map to your SD card number...
_Dejan_ said:
You don't need this Unlock ESN code or any IMEI to work this mobile XT with Que (EN All Unlocked).exe because this que don't look serial of maps and you don't need unlock map to your SD card number...
Click to expand...
Click to collapse
when i use mapsource to get my device ID, it shows my device ID is the same as the ESN code.
thanks anyway...
not sure if this is asked before..
when I'm using Garmin XT, my active sync will launch and Quick GPS will launch and prompt me to update even thought it's just updated.
any1 also encountered this same issue?
thx
oriki said:
not sure if this is asked before..
when I'm using Garmin XT, my active sync will launch and Quick GPS will launch and prompt me to update even thought it's just updated.
any1 also encountered this same issue?
thx
Click to expand...
Click to collapse
You must in QuickGPS settings check "Autodownload when connected to PC via ActiveSync"
Thx dude...
that solves the problem...
ActiveSync did not launch also...
mobile xt isnt picking up the internal gps chip whats the deal?
_Dejan_ said:
1.) Im download Garmin Mobile XT 4.10.40 for PPC
2.) Im download Que(En Unlock All).exe & SW.UNL
3.) all data from Garmin Mobile XT 4.10.40.Rar Im extract to storage card(By card reader) an Im put it into HTC Tytn II
4.) When ask me If I want install Garmin Mobile XT press Yes and when ask you If you want start aplication YOU MUST CLICK NO.
5.) Remove card from phone and put it into card reader then start Mapsource and select which maps do you want export then send it to device and select card reader
6.) When complete than you copy SW.UNL into Garmin folder in card and delete "2577" folder
7.) put card into phone and connet it by Active sync and rename Que(En Unlock All).exe to Que.exe and replace file Que.exe on phone folder Garmin with this new file.
8.) Start mobile xt and setup all setings when search for receiver wait and when ask you if you want stop searching click no. Then must find your GPS receiver on COM4 otherwise try it setup manualy.
9.)if you look map you will see no map and you must first create new route to any adress and then you will see map(Detailed map or any other name)
This work for me and two my friends(one have Fujitsu Siemens Pocket LOOX T830 with internal gps other have Charmer with BT GPS receiver)
Click to expand...
Click to collapse
Hey!
Thank you.
How do you straart GM XT? Whick program/file do you start?
Best regards.
ride100 said:
Hey!
Thank you.
How do you straart GM XT? Whick program/file do you start?
Best regards.
Click to expand...
Click to collapse
I guess the Garmin Mobile XT icon in Start -> Programs. If all fails, search your device for all garmin files, that is if it is actually installed.
Autoroute
Garmin mobile XT could't autoroute
please help me
Garmin Mobile XT may not autoroute if 1) you are on an off-road location or unrecognized road or 2)you are trying to route to locations across maps and you don't have the base map installed (i.e., if you are trying to map from Georgia to South florida but you don't have the north florida map or the base map installed).
If neither of these apply to you then I'm not sure the answer, never had that problem. Hope that helps.
I’m using an htc tytn ii and trying to install tomtom navigation software version 7 there on but getting the error “Installation was unsuccessful. The program or setting cannot be installed because it has not been digitally signed by a trusted certificate” where after the instalation shuts down. I’ve tried the tomtom software on my tytn with the same result. Any help?
I’ve already tried the file default-signed-disablesecurity.zip as well as turning off the appropriate messages with kaiser tweak with out any success. the tytn ii uses windows mobile 6 and the tytn windows mobile 5 just for some extre information in case it’s necessary
Thanks in advance
first, this is is NOT tytn/kaiser forum.
2nd, i had no problem installing TT7 on my Universal w/ WM6. Yes, it *****ed about Unsigned code but I selected OK and it installed just fined. Perhaps u downloaded a bad copy of TT7. Use the 7.450 version.
Hi there
Thanks for the advice. I've been searching high and low for that version of tomtom ... Do you know where I can download it? Are you able to post a link to't?
Thanks again
Hi!
Had someone tried to run Symantec pcAnywhere mobile on Touch HD?
I've got the following Problem:
Installed by .cab-File
Started, works great on this huge Display!
...but: After rebooting my PPC the following happens:
If I try to start now, it dosen't work anymore.
It seems, some components are missing.
What can I do?
Thanks,
Nomel
Hi Nomel, i have the save issue's. after several soft and hardreset and different installation of applications, i also find the error in symantec pc anywhere mobile.
i don't know how. but after a hardreset and a clean system i install only pca mobile. works first fine. but if you softreset your hd you cannot anymore run or reinstall it !!!!
yesterday i tested with making a backup before , softreset and the same !!!!!!!!!!!!!!!!!!!
at moment i have no solution.
Symantec pcAnywhere mobile install on HTC Touch HD
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
I have been using PCAnywhere for months with no problems after many soft resets.
mpconti said:
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
Click to expand...
Click to collapse
I'm having the same problem. I'm using NFSFAN's custom ROM on my HTC Touch. Only on his later 2 versions does this problem occur. I believe he got the ROM build from the Omnia....
So, the problem could be some kind of conflict between the program and these newest builds of WM 6.1.
Damn....
I have the same problem with rom 1.56 ITA . with the previous version everything was ok even after softreset. with the new one I find the described error during install
htc touchpro2 pcanywhere solution
i have installed pcanywhere 12.5 on my htc touchpro 2 and it worked great until i soft reset it (powered down and up again) and i get the same problem. wont run and wont reinstall. so i threw pcanywhere 11.5 in the ol' cd rom and just installed the moble onto my phone and it works just fine. i still have 12.5 installed on both my machines and the mobile 11.5 connects to my xp box great. not sure about vista or win7. try that guys. hope it works!
This worked for my Touch Pro 2
I found this fix somewhere (don't remember where).
But if you rename
MFC80***.DLL to MFC80***.dll
there are a few of these files in the Windows directory.
I used resco explorer and hit rename and it automatically made the .DLL to lowerecase .dll and voila, pcAnywhere mobile worked.
You may have to do a fresh, new install and then do the rename before a reboot.
I hope this works for you.
(windows directory of the phone)
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
kbriaz said:
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
Click to expand...
Click to collapse
This is actually the HD forums. You'd be better asking this in HD2 forums
Hi all,
Im having problems trying to install garmin on my X1
I install the program (GarminMobileXTforSymbianS60_41020.exe) from my PC and then select the remote disk (X1) and it installs all the correct files in a folder garmin which is in the SD cards directory.
But when i go to select the garmin app in 'my programs' it is not there?
There is no icon available anywhere.
What am i doing wrong?
You need to install the one for windows mobile; not Symbian.
Rob84 said:
Hi all,
Im having problems trying to install garmin on my X1
I install the program (GarminMobileXTforSymbianS60_41020.exe) from my PC and then select the remote disk (X1) and it installs all the correct files in a folder garmin which is in the SD cards directory.
But when i go to select the garmin app in 'my programs' it is not there?
There is no icon available anywhere.
What am i doing wrong?
Click to expand...
Click to collapse
you need ppc version
Ive tried another version - (2008) Garmin Mobile XT v.5.00.20
Is that right?
Can you give me an example of what i should be using
I install Garmin Que that is for ppc...it works good