Database Users

tom tom maps for windos mobile 2005

I finally succeeded in installing tom tom 5.1 on the jasjar (htc universal) but when I try to install the cab file with Italy map the installation (made thru cab installer directly in the pda) goes wrongly (unsuccesful installation). has anyone some ideas ... ?

DID YOU GET ANY MAP ONTO ?
i'm trying too ...

caprotti said:
I finally succeeded in installing tom tom 5.1 on the jasjar (htc universal) but when I try to install the cab file with Italy map the installation (made thru cab installer directly in the pda) goes wrongly (unsuccesful installation). has anyone some ideas ... ?
Click to expand...
Click to collapse
Hallo,
It's not possible to install maps trough .cab files.
TT has to install map related lines in the .exe file, .doc file and in the reg.
So you have to install trough setup.
Succes, Hannes 8)

Use a card reader.
Or you could install the maps to a local folder on the PC and then copy the directory over via activesync.

caprotti said:
I finally succeeded in installing tom tom 5.1 on the jasjar (htc universal) but when I try to install the cab file with Italy map the installation (made thru cab installer directly in the pda) goes wrongly (unsuccesful installation). has anyone some ideas ... ?
Click to expand...
Click to collapse
Can you please tell me how you managed to get TomTOm installed? I get the error message every time: Tomtom was unsuccessfully installed.

carphead said:
Use a card reader.
Or you could install the maps to a local folder on the PC and then copy the directory over via activesync.
Click to expand...
Click to collapse
Ok I installed Italy maps but now the program asks for an activation process. Even giving the code embedded in the map, the activation on the tom tom site doesn't work...

caprotti said:
carphead said:
Use a card reader.
Or you could install the maps to a local folder on the PC and then copy the directory over via activesync.
Click to expand...
Click to collapse
Ok I installed Italy maps but now the program asks for an activation process. Even giving the code embedded in the map, the activation on the tom tom site doesn't work...
Click to expand...
Click to collapse
can you give us a step by step process. and what versions of TT have you used ?

I installed tom tom 5.1 copying .cab files in the jasjar, then I copied the italy_plus folder in the jasjar and the program acknowledges the map ... but it asks for the activation code, saying that i must insert the disposal code (shown by the program) in a tom tom site mask. I tried but the site says that the disposal code is wrong.

I Got my TT5 working on the K-Jam! (Partially) This is what I did:
1 - TT5 did not istall properly over active sync - So I installed all of the CAB filed to my Storage Card and installed directly on the divice (I belive there are 4 files + get 1 voice file by searching the CD) I belive some the files are named ttn, GPS, etc)
2 - I emailed TomTom support and sent them a copy of my card so they can allow me to Re-activate my account (Belive they needed a copy of the card/cd, invoice of purchase and device invoice -- u can scan them , attached them, to a word file and email it to them). My code originally activated for my JAM (diff device code).
3 - I used the TomTom Map software to install the map to my PC. Then I copied the folder to my devices card via active sync
4 - when I started the TT5 -- it asked me for the activation code (which I got through ttcode.com)
5 - I activate the GPS control panel on Windows 5.0 (instructions I found on this site)
That is as far as I have gotten -- I am trying to figure out how to LINK the GPS to the K-Jam -- TomTom only lists a few coms open, but not one that the Blue Tooth lists.
Once I Figure it out -- I will post again!
Email me if you have any questions.
Hoped this helped!

In total you have to copy 4 files
mobile device\tomtom\CurrentMap.dat
\TomTom\TomTom\data05.bmp
\TomTom\TomTom\data05.chk
\Program Files\navigator\data.chk
\Program Files\navigator\tomtom navigator.exe
\Program Files\navigator\navigator.cfg
that's all.
data05.bmp and .chk is for example, you can choose one of your own voices.
Look this up on your device other wise i send you my files so you can try them.
Good Luck
GuidO

check www.htcclub.net for the soultion for installing TT5 and make it work ! :roll:

Tomtom Navigator 5.21 WM5 - No Maps Detected - FIX

Hello,
I have installed TTN5 to my device rom.
Now I have put the "Florida-Map" in the root directory of my mini-sd card.
When I start TomTom it says there's no maps detected.
I have read some other forum about it but no one has found a solution.
Any ideas please ?
-----------------------------------------------------------
I found the solution for the NO Maps Detected:
Your problem like many others is not your version of TomTom its your versions of the map.
I realise the maps you currently have used to work on your older tomtom version.
Look for complete map sets of the USA. USA Eastern-Map, USA Western-Map...and so on.
DO not ask me or PM me for where to find those files.
Look on file sharing networks or buy them from TomTom
Hope this helps
--------------------------------------------------------------
TomTom Bluetooth GPS Ports WM5 Working Setup 100% Easy Step By Step !
First of all I would like to say thank you to "thereaperman" from Modaco Frums for this great help ! I took this from him and making it accessible to this forum easily for others to use !
Here are his steps:
STEP 1 : INSTALL TOMTOM5
You do this by copying the CAB files from the CDROM (eg F:\PocketPC) to the K-JAM and launch one by one from there with the explorer of the K-JAM
.
You can install voices the same manner by copying the CAB files to the K-JAM (eg from F:\Voice on the CDROM)
STEP 2 : UPGRADE TO V5.1
EDIT: Please use the tomtom official site to obtain the update here
STEP 3 : ACTIVATE THE GPS CONTROL PANEL
Fire up a registry editor (eg http://www.freewareppc.com/utilities/phmregistryeditor.shtml )
Go to: HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
Add a DWORD called "Group" and give it the value of "2" (dec)
The GPS panel will now show up in your connection settings.
STEP 4 : INSTALL TOMTOM5
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In BT, select the OUTGOING port to 6.
3. In the GPS control panel, select the GPS program to 0 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 0 free. Select COM 0 and close TT5.
5. At the GPS control panel again, now select COM 6 (before we set it up at 0).
6. At BT: select OUTGOING port to 0.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
FOR THE Wizard or IF NOT WORKING ON YOUR DEVICE TRY:
6. At BT: select OUTGOING port to WHATEVER NUMBER IS AVAILABLE EXCEPT 6.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and
CHANGE GPS BT PORT SETTINGS TO WHATEVER NUMBER YOU CHOSE IN STEP 6
it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
Hope this helps all of you !!!

1. Create a txt file on your pc called Currentmap.txt
2. In txt file write "\xxxx-xxx\yyyyyyy"
xxxx-xx = name of your sd card as shown in file explore
yyyyyy = name of you current map file as shown in file explorer
3. Save the txt file
4. rename the txt file to Currentmap.dat
5. On you Wizard create a folder in your My Documents folder called TomTom
6. Copy the Currentmap.dat file into this directory
7. Start TTN and hopefully it will see the map

THank you,
But didn't work for my situation. I even tried to take the CureentMap.dat file from my instalation from my JAM but that didn't do it either !
Any other suggestions please ?
This seems to be a problem on multiple forums that no-one has figured out yet.

Same problem, here. I got an older map which I used on my Treo 650 which doesn't seem to work with WM5 version. I presume these maps are interchangeable since it's strictly data. Put California-map in the root directory and has the same issue as the OP's.
I've read from another forum that old maps (5.0?) do not work with 5.21. Is that the case? Appreciated if someone can confirm so I don't have to waste my time playing w/ this.

here is how I did it:
On your desktop, launch Notepad.
Type & \Storage Card\New-England_and_Mid-Atlantic-Map\ or whatever the name of your main map folder is on your mini-SD card. Do not forget to add the final backslash and a have a space between the ampersand and the first backslash.
Save the file as CurrentMap.dat. Make sure it doesn't end up as CurrentMap.dat.txt!
Put the file in My Documents/TomTOm on your device.
Worked for me with my Benelux Map.

canada and USA maps doesn't work with tomtom 5. You can make it work using bakonl version 5.1 but not higher

As far as I know 5.21 only works with the plus maps.

I had a WM2003 PDA and had TT V5 on it.
I now have a new device with WM2005 OS and I installed TT V5. TT Worked (including finding maps) but could not see the BT GPS.
I upgraded to TT V5.21 and it worked. It sees all the European Maps.
However to install TT V5 I had to do it manually because the install did not like connecting to the device using Activesync. I did it by creating the required directories on the Phone manually, extracting TTN.cab on the PC, renaming the extracted files and manually copying them to the Phone. The TT V5.21 installed the upgrade OK over Activesync.
If anyone wants the full instructions on how I did it I will post them.

Please provide instructions!

OK - Heres what I did - please note that this is the exact process I followed (twice) and it worked for me. If it doesn't work for you I'm not sure what you can do. But I used TT V5 and the UK/France/Italy/European Maps that came with it.
--------------------------------------------------
step 1 : INSTALL TOMTOM5 Manually
On the PC, Extract the files from within the cab ttn, (its in the PocketPC directory of the install CD.)
Rename 000file0.001 to dat.chk
Rename 000file1.002 to TomTom Navigator.exe
Rename 000file2.003 to CurrentMap.dat
Create a folder in on the device in 'my device-> Program files->' and call it Navigator - place data.chk and TomTom Navigator.exe in here.
Create another folder in 'my docs' called tomtom and place remaining file CurrentMap.dat in here.
For voices I only installed a 'celebrity voice' so I put the files for it in a directory I created called 'voices' in 'my device'.
If you have them OK, if not you will have to get them from a previous install - or create your own.
Now copy the Map Directory of your choice from your TT CD to your Storage Card.
step 2 : SETUP GPS DEVICE
1. Pair your device with your GPS BT unit and select the checkbox for serial access.
2. In the COM PORTS setting for the BT, select 'New Outgoing Port' and for the BT GPS unit set it to 7
Now launch TT and hopefully it will start and go through the install process. When you get to the point where it asks you to select the GPS device - select 'Another bluetooth GPS', and you will be asked to select the Port. If you see COM 7 free - select it. (If not - mine didn't -, select another port to get through the startup, but when TT starts it will report no GPS device found.)
If you did not see COM 7 when you ran TT5, then the chances are you need to upgrade to V5.21 and once upgraded start TT and go to 'Change preferences' - 'GPS Status' and configure the GPS unit again when COM 7 should appear (mine did).
The upgrade also added a standard voice which was not there before.
------------------------------------------
Good Luck

optical said:
I've read from another forum that old maps (5.0?) do not work with 5.21. Is that the case? Appreciated if someone can confirm so I don't have to waste my time playing w/ this.
Click to expand...
Click to collapse
On my iPAQ i origionally loaded TTN v3 with all the associated maps. When TomTom announced the upgrade to TTN v5 i took the oppertunity (All the maps of western europe for £60 seemed to be a bargain). After updating to version 5.0 I have been using it ever since. A few months ago i updated it to v5.21, (essentially its a pair of cab files that do all the upgrading to 5.21) this only updates the software, and does not alter the maps in any way.
TomTom nav v5 maps are all similar, the plus maps just contain newer information (like newly built roads). What TTN5 will not do is read the maps from earlier versions of TTN, like v3 or v2 maps.

any more ideas? Played around with this for long time and can't still get it to load the NA map. Keep getting that "Maps not found' error when I start the program.

NA map?
I assume thats North America.
Have you tried any others?

No. I figure it should not make any difference and I only have the USA map. I am very frustrated at this as GPS is a big function I need on my MDA.
Would manual install help in my situation?
My install was very straight forward. This is what I did on my install, perhaps someone can point out on what I did wrong
1. Just ran the TTN 5.21 and installed the TomTom and Navigator both on minSD.
2. copied my California-map folder into Storage Card\California-map\ directory
3. Modified the currentmap.dat file to say "& \Storage Card\Californai-Map\
4. Ran the damn TTN and got that maps not found error.
What am I doing wrong? Please help.

It sounds like you have done all the right things, but the only other thing I can suggest is that your TTN software has not been activated to accept all maps. There is a patch you can use which "opens" your software to use all maps.
PM me for more info

Re: Tomtom Navigator 5.21 WM5 - No Maps Detected
magnusbaron said:
Hello,
I have installed TTN5 to my device rom.
Now I have put the "Florida-Map" in the root directory of my mini-sd card.
When I start TomTom it says there's no maps detected.
I have read some other forum about it but no one has found a solution.
Any ideas please ?
Click to expand...
Click to collapse
I have noticed this too (with 5.21 only) . What worked for me was to put another map (besides the not-detected one) on the device. THEN both will be detected. I believe this is an activation issue somewhere in the s/w.

Koksie said:
here is how I did it:
On your desktop, launch Notepad.
Type & \Storage Card\New-England_and_Mid-Atlantic-Map\ or whatever the name of your main map folder is on your mini-SD card. Do not forget to add the final backslash and a have a space between the ampersand and the first backslash.
Save the file as CurrentMap.dat. Make sure it doesn't end up as CurrentMap.dat.txt!
Put the file in My Documents/TomTOm on your device.
Worked for me with my Benelux Map.
Click to expand...
Click to collapse
I have just installed TomTom and was getting the map not found error, performed the procedure above, but it didnt work first of all, this is what i had to do to get TomTom working and find the maps.
1. Create the folder TomTom under My documents on the phone (note TomTom folder created with capital T's)
2. Create the file Currentmap.dat with the following entry
& \Storage Card\TomTom\Great_Britain-Map
and copied it to the My documents\TomTom folder i created above
3. Copy the Great_Britain-Map directory that is on the storage card\TomTom directory to the ROOT of the storage card...!! THIS is the what made it work.
You may now remove the Great_Britain-Map folder in the TomTom directory on the storage card to save space.
A combination of creating the Currentmap.dat file (even though it points to a folder i have removed!!!!) and copying the map folder to the root of the storage card worked.
Without the currentmap.dat, tomtom would just hang on me and have to perform a soft reset.
I hope this helps, thanks to this thread i managed to get TT working on my wizard, cheers baz

Funny how you can go on about a subject when the answer is alreeady given in the tread. So maybe I wasn't clear enough. I'll explain better now:
Tomtom 5.21 can read all maps provided by tomtom, as long as they are for the version 5
Patched version of tomtom can read v5 maps too, but only if you put two of them at the root of your SD card. It means two maps that are normaly reconised by tomtom 5 (europe and australia mainly). People complaining about not finding a single map are using an illegal version.
The US maps floating around on p2p are v4 maps. They are not valid for tomtom v5. Maybe the latest "whole US in one map" is compatible, but the splitted one, with one folder for each state, is a v4 map.
The legal version of tomtom v5 cannot read v4 maps. If you put one v5 and one v4 map in your SD card, the patched version will not work because it will only find one map at the root.
The only patched version able to see the v4 maps are (to my knowledge) the bakonl version for v5 and v5.10. This version will hang if you use POI in the "plus" version maps available for most european contry. You will have to choose you executable depending on your maps.
All other problems, described in the previous posts, are for the first time setup. They just help getting the program running for the first time.
SO to answer clearly to the first poster: get a patched version 5.10 by backonl, and don't use it with "plus" version maps. If you want to use them, switch to patched 5.21

and apologies for those that contacted me for the file that makes the maps recognised. I checked to see if I still had it, and I have lost it since i reloaded my PC.

Hey I still have the problem.
I have put the Benelux map on my storage card and the Florida map too.
Only the Benelux one gets detected.
this is my CurrentMap.dat that is the My Documents\TomTom folder
& \Storage Card\Benelux-Map\
& \Storage Card\Florida-Map\
I have the Bakonl 5.21 release.
Hope someone can find a solution !
Thanks you

Help to install Garmin S/W on X1

Could someone tell me where do I download the Garmin S/W to install on my x1. I have checked the thread on this forum and I have located the following file "GarminMobileXTforWidnow Mobille_500100w". However when I try to install it, I get this file is not a valid PC application.
What am I doing wrong? Did I miss any steps or need more files?
Thanks.

You need MobileXT version and not Windows Mobile! try to find the following file "GarminMobileXTFullImage_4xxxx.exe"

Download latest Garmin Mobile XT for PPC (5.00.20w)
http://www8.garmin.com/support/agree.jsp?id=3389
Install it on your X1. Then download language and voice file and install it.
http://www8.garmin.com/support/download_details.jsp?id=3493
Base map:
http://www8.garmin.com/support/download_details.jsp?id=3645
Regards,
Damijan

i did that but it never connects to the Built-in GPS in my Xperia ?

You must have correct unlock code in order to use Garmin XT on PPC. Buy navigation software from Garmin or use Google to find workaround.

Thank You. It worked for me. I now have to get the detailed US map installed.

Garmin Detailed US Map
I need help getting detailed US map?

Thanx its work like a charm

Yeah is the same for me the status of GPS never reponse, but anyway is connected just check in view map... wait 1 min, and then rock it

Garmin installation problems..

Hi all,
Im having problems trying to install garmin on my X1
I install the program (GarminMobileXTforSymbianS60_41020.exe) from my PC and then select the remote disk (X1) and it installs all the correct files in a folder garmin which is in the SD cards directory.
But when i go to select the garmin app in 'my programs' it is not there?
There is no icon available anywhere.
What am i doing wrong?

You need to install the one for windows mobile; not Symbian.

Rob84 said:
Hi all,
Im having problems trying to install garmin on my X1
I install the program (GarminMobileXTforSymbianS60_41020.exe) from my PC and then select the remote disk (X1) and it installs all the correct files in a folder garmin which is in the SD cards directory.
But when i go to select the garmin app in 'my programs' it is not there?
There is no icon available anywhere.
What am i doing wrong?
Click to expand...
Click to collapse
you need ppc version

Ive tried another version - (2008) Garmin Mobile XT v.5.00.20
Is that right?
Can you give me an example of what i should be using

I install Garmin Que that is for ppc...it works good

TomTom or IGo for windows phone 7 ?

Hi,
Since I bought HTC Trophy I am trying to find how to use TomTom or IGo,
Is there anyway to do that ?
Thanks

Nope. But you can try this one.
http://forum.xda-developers.com/showthread.php?t=919612

Thanks
I have tried many times to unlock the phone, but no luck
Will wait for a reliable unlock solution
DominikZ said:
Nope. But you can try this one.
http://forum.xda-developers.com/showthread.php?t=919612
Click to expand...
Click to collapse

Unlock works just fine. You only have to reunlock it every time you connect it to your computer (which I barely do as I use Wireless Sync).

I would love a TomTom version for WP7...I've been using TomTom for years on my 2002,2003,5.0,6.0, 6.1 and 6.5 WM/PPC devices (yes, I have had PPC devices from 1.0).
I hope Tomtom comes on board for WP7...

:/
As far as I know TomTom oficially said that they are not interested in Windows P 7 for now :/

When I tried and used both TomTom and Navigon for quiet a while, I prefered Navigon. So I'm glad it is Navigon who jumped on WP7 train

navi
I got Sygic Aura on my iPhone and in my opinion this is the best navi.

shoekstra said:
When I tried and used both TomTom and Navigon for quiet a while, I prefered Navigon. So I'm glad it is Navigon who jumped on WP7 train
Click to expand...
Click to collapse
With a WP7 interface, it might have to do... I will admit I tried both before and I liked TomTom better but, that's just me.
RobertPOL said:
I got Sygic Aura on my iPhone and in my opinion this is the best navi.
Click to expand...
Click to collapse
No offence but, how does that help someone with a Windows Phone 7 model ?

Not quite
DominikZ said:
Unlock works just fine. You only have to reunlock it every time you connect it to your computer (which I barely do as I use Wireless Sync).
Click to expand...
Click to collapse
Hi, you do not have to reunlock your phone. Check on xda forums, there is a simple method to prevent relocking of phone, I have just updated to NoDo and my phone, HTC Trophy, is still unlocked and all side loaded apps are still working.
A few simple steps to unlock and keep it that way:
Phase1:
-----------------------------
1. Do not update to NoDo yet.
2. Install windows phone SDK to a windows 7 pc or windows xp sp3 pc and Zune
3. install the reg file on the PC!
4. disable your PIN verification on the phone
5. Disable your screen timout on the phone, put it always on.
6. Send an email to yourself with the chevron's certificate file and open the email on the phone. Tap the attachment with the certificate file, tap again and chose install your phone should say developer certificate installed.
7. connect the phone to your pc, make sure the Relationship in Zune is not Guest (change it by clicking there on Guest and following screen instructions)
7.1 Close any other software on the pc: skype,yahoo, all, let only Zune running.
8.Minimize Zune and open Chevron's Unlocker, click Unlock it should take no more than 2 seconds. To check if everything is ok after unlocking close Chevron's software,and open it again, now the button should say Relock, if it says Relock your phone has been succesfully unlocked and you can proceed to phase 2.
Phase2:
------------------------
1.Get Tom's Xap installer (google it)
2.Install TouchExplorer and HTC Connection Setup
3.Install the unlockit.xap from this forum to make the phone stay unlocked, and after, run it from the applications menu (it should appear at the bottom of the list as XBMOD.Files.Deployer).
4. Using touch explorer copy \My Documents\My Ringtones\CustClear.provxml to \Windows\
5. Run HTC Connection Setup, pres the check button (that "v" mark) and let it finish.
6. You are done
This has worked for me. After applying all these steps you can now update your phone via Zune. If, somehow your phone gets relocked again use this to unlock it:
http://forum.xda-developers.com/showpost.php?p=10793775&postcount=52
Now, we all know that there is no true GPS turn by turn software available yet. But, Navigon has release a version of their navigation software only for T-Mobile users, that's a pain in the a** for others right? Do a search on the google for a patched xap of the navigon software that workes for any SIM provider you have: NAVIGON_MobileNavigator_patched.xap.
Steps to get it work:
1. Download and install the app with Tom's XAP installer.
2. Enable Data Connections on your phone (don't worry, it's smart enough not to use your 3G connection to download any huge data )
3. Open Navigon Select, it will ask you for activation press ok, it will now simply activate using your 3G/EDGE/whatever you have connection, again don't worry it uses almost 2 or 3KB of data for this.
4. Now it will ask you to connect to a WiFi hotspot for it to download it's main data files,it will not work on your 3G connection.
5. Connect to a WiFi hot spot and let it download all the data needed.
6. After it's done you have a fully working GPS software, but only with Germany, Austria, Liechtenstein and Switzerland.
7. To get any maps you want do a google search for navigon maps, mainly for 1.7 version.
Installing maps:::
You either get the maps the normal way or you search for navigon 1.7 iphone maps wich come in an .ipa extension. This you can extract with Uniextract and find the required .map files inside.
OK so I presume you have all the .map files you need. Now to be able to put them on the phone you first need to apply the registry trick on the pc so your phone will appear as a device in My Computer (search google for this registry tweak: windows phone 7 as mass storage).
Now copy on the phone in My computer all the .map files you need.
Afterwards open TouchExplorer on your phone, navigate to \my documents\zune\content\0400 and there you will see the files but with a strange extension and name. You have to rename each file with the right map name and the extension .map (austria.map, france.map etc). After you have renamed all the files (please be patient, renaming large map files such as france will take some time so don't freak if your app will appear as frozen, it is not) copy them to the following folder:
\Applications\Data\6F9CB464-BDA......\Data\IsolatedStore\map
There you will see the already existing maps, copy your .map files here, also please be patient!! it will take some time depending on how may maps you have.
I strongly advise you to disable the screen timeout also untill you have finished copying the files!!!
When it's done you can open the Navigon Select and chose a country you have copied, it should appear if you have don all the steps wright.
Mention that if you change your simcard and HTC Connection Setup runs to auto setup your data connection you will need to open Navigon and activate it again, your maps will still be there do not worry.
Good luck!

I couldn't make Australian map working, it is only for people from Europe.
If you open the map it shows Europe and countries around Mediterarenian Sea