to change the HTC splashscreen. - Touch Viva, MDA Basic ROM Development

hi friends..
i would change a HTC splashscreen.
Mean, I just turn on the main picture pda (in the first 15 seconds), which are written in upper left corner features as the ROM Radio version and Hard SPL
i find this thread, but it isn't for opal
http://forum.xda-developers.com/showthread.php?t=344891
i can you help me!
thank...

do hard reset
claudio8 said:
hi friends..
i would change a HTC splashscreen.
Mean, I just turn on the main picture pda (in the first 15 seconds), which are written in upper left corner features as the ROM Radio version and Hard SPL
i find this thread, but it isn't for opal
http://forum.xda-developers.com/showthread.php?t=344891
i can you help me!
thank...
Click to expand...
Click to collapse
first do hard reset for detail http://forum.xda-developers.com/showthread.php?t=446446

find...
http://forum.xda-developers.com/showthread.php?t=494423&highlight=splash+screen

nice..........

Related

Unable to USPL ?

Hello folks,
I'm new here. I don't know much about the technical stuff.
I have HTC3300 (Artemis).
I installed "Gullum's WM6.1 Beta version" in it but It became slow
than I searched here in this xda forum for WM6 and found a WM6 rom for Artemis.
I installed it.
That rom's name is "HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_ R".
Now I'm not able to USPL. I have tried 3-4 times. (without SIM and SD Card)
After using USPL utility, on booting it shows:
IPL 3.13.0001
SPL 3.13.0000
GSM 02.94.90
OS 3.13.0.0
SPL is not changing to 1.11.0000. Please HELP me.
How can I unlock it?
I mean how can I succeed to USPL my Artemis?.
I shall be GRATEFUL to YOU
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Zecanilis said:
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Click to expand...
Click to collapse
First of SORRY for the double post. I thought the same previous post will hide in between the posts in that thread. I won't repeat this in future..
Problem is that I want to upgrade the Radio Rom, so when I use the USPL tool to CID unlock my phone,
after reaching 10%....20%....30%.....40%....50%....60%....70%.....100%, the screen become white and phone gets disconnected from the Active Syn.
Either I have to remove the battery or I have to soft reset to start the phone after "white" screen.
On booting, it still shows SPL 3.13.0000 not showing 1.10.0000.
SPL didn't change to 1.10.0000, is it means that device is still CID locked?
please tell me where I'm mistaking here..
I'm using Vista Ultimate SP1 in my Notebook.
Nobody is there in this forum,
who can help ME ??
Anyway ... thanx to everybody..
I myself found the solution...
New Radio Rom - INSTALLED > 03.34.90 ..
I'll post my feedback about this new RADIO ROM 03.34.90 in the main post by Zecanilis
Thanks "Zecanilis"
could you please let me know the solution?
I got the EXACT same problem
thanks.
Dont worry, the solution was on this post by pvdhelm:
http://forum.xda-developers.com/showthread.php?p=1312109#post1312109
Bhups said:
could you please let me know the solution?
I got the EXACT same problem
thanks.
Click to expand...
Click to collapse
nothing to worrying.. just keep going..
when white screen appeared, i just continued to flash my phone by starting RUU application usually present in the rom folder along with the rom to be flashed..
it showed progress bar in the Computer screen {from 1% .... till 100%}while the PPC screen appeared white during this procedure..
and the flashing process reached to 100%, displaying CONGRATULATIONS on the Computer screen and PPC got restarted by itself with new ROM.
I have done flashing up to 20-25 times by this method.
Phone is WORKING like a CHARM.. NO PROBLEM AT ALL ..

screen problems

I have 2 weird problems with my HD (i've brought it at second hand, so no warranty).
1.when i power on my device, it's everything ok, appear that smart mobility (or wharever) and suddenly when appear the radio v. ipl, etc the word are blurred into blue and remains in this way even if is loaded into Windows; the only way to dissapear is to press power off/on (for standby screen). Does someone knows why?
2.it's a question: Does someone knows if the 4 buttons from bottom (call, end call, home, back) should be lighted?
just because you have bought it second hand doesn't mean that there is no warranty. I would get in tough with HTC and check it out first. They come with 2 years i think so you might be ok.
1. this is a weird issue, are you using the stock HTC ROM? have you tried a hard reset? ave you tried a ROM upgrade?
2. no
ok, so with the 2. i'm clarified (even if it was so nice to be lighted). with 1.i've allready tried 3 rom's, radio's, etc. the same thing. i don't know why, it's so strange for me.
Now im stumped. I would get in touch with HTC and check that warranty
ady_uaic said:
ok, so with the 2. i'm clarified (even if it was so nice to be lighted). with 1.i've allready tried 3 rom's, radio's, etc. the same thing. i don't know why, it's so strange for me.
Click to expand...
Click to collapse
Is your SPL correct for the ROM your on?
Can you post what is shown for radio, Rom Version, Spl
R. 1.14.25.24
RG. 52.64.25.34U
D Energy ROM
ady_uaic said:
R. 1.14.25.24
RG. 52.64.25.34U
D Energy ROM
Click to expand...
Click to collapse
Not sure it could be a bad flash sometimes happens, post your question in the ROM thread your using they will have a better answer for you the link is here
You do have HSPL by olinex installed first right it should say 156 olinex when you go to bootloader
yes, is olinex hspl. and i don't think is a rom problem, 'cause i tried 3 of them.

return phone to standard settings o2

hello all
i have touch hd
tryed to up grade to 6.5
all ok but now when i re start i get funny colour screen
when it clears nothing works properly and the unit won't conect to o2
the phone side won't swich on :-(
please can someone help me put it back to standard uk o2 as i now have no phone
what software do i need and spl thingy
sorry don't know much about phones
is it dead??
help
dugsoft said:
hello all
i have touch hd
tryed to up grade to 6.5
all ok but now when i re start i get funny colour screen
when it clears nothing works properly and the unit won't conect to o2
the phone side won't swich on :-(
please can someone help me put it back to standard uk o2 as i now have no phone
what software do i need and spl thingy
sorry don't know much about phones
is it dead??
help
Click to expand...
Click to collapse
Common problem when your SPL doesn't match rom. Did you follow this guide? What does your SPL say in bootloader?
Post further queries regarding flashing in dummies guide thread

red line at left side after installing HSPL1.42

dears,
I need your help to fix or to analyze the following problem:
my mobile is : HTC HD2
SPL: 1.42
after that I changed SPL to HSPL1.42 a vertical red line is appearing on my screen at left side!
please advise
Picture please, or a more detailed description.
Thank you
kindly find the attached picture.
and note that the problem is still after original SPL is restored .
best regards
This is a bootloader issue. Have seen it on the HTC Kaiser.
You won't happen to own a prototype do you??
Try flashing HSPL 1.66
ach75 said:
kindly find the attached picture.
and note that the problem is still after original SPL is restored .
best regards
Click to expand...
Click to collapse
Could be a hardware malfunction. Never seen this before.
dear xmoo,
I did what you suggest (HSPL 1.66) then flash to the original room, but still same problem I have!
dear forelli ,
if this is the case why it was not shown before?
many thanks guys and best regards
ach75 said:
dear xmoo,
I did what you suggest (HSPL 1.66) then flash to the original room, but still same problem I have!
dear forelli ,
if this is the case why it was not shown before?
many thanks guys and best regards
Click to expand...
Click to collapse
Is it a prototype?
cant answer, why it shows after flashing hspl...
but restore your stock spl with hspl2 installer and bring it to your shop
think you got no other way
maybe tell him that it was shown after doing a soft reset or something else.
i think this is just a hardware defect which "showed" surprisingly after flashing hspl. i think theres no connection between hspl and your disfunction.
DN41

White Screen

Hello,
I have a major problem with my HTC HD2.
I checked the forum but i coulnd find a good answer.
The problem with my HD2 is that when i start it the screen stays white.
I can do a hard reset and even do a factory reset.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
but i dont know how i can fix this.
Worst case its bricked???
Any help is appreciated
Greets.
bdiepeveen
Hi,
have you flashed a new ROM before ?
In this case its a Radio Problem -try to update to (min) version 2.10. 50.08_2
http://forum.xda-developers.com/showthread.php?t=611787
good luck
I have installed the new Flash from the offical HTC HD2 site but that was with the installler.
Do these work the same way??
Greets
Ben
you have to do a HardSPL before -than you can flash Radios via the SDcard-method and via CostumRUU (like the Installer from HTC)
read this TUT for futher questions:
http://forum.xda-developers.com/showthread.php?t=609477
Rupesh
bdiepeveen said:
Hello,
I have a major problem with my HTC HD2.
I checked the forum but i coulnd find a good answer.
The problem with my HD2 is that when i start it the screen stays white.
I can do a hard reset and even do a factory reset.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
but i dont know how i can fix this.
Worst case its bricked???
Any help is appreciated
Greets.
bdiepeveen
Click to expand...
Click to collapse
===================
Hi Friend,
I also had the same problem, i took it to HTC Service center and found problem in the motherboard, they replaced the motherboard and its working fine from me. (my device is under warranty )
bdiepeveen said:
The problem with my HD2 is that when i start it the screen stays white.
Click to expand...
Click to collapse
usually happens when you flash a cooked rom that needs a different radio.
I can do a hard reset and even do a factory reset.
Click to expand...
Click to collapse
factory and hard reset are the same thing.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
Click to expand...
Click to collapse
red white and blue is 'bootloader'.
So, boot to bootloader, see what it says next to spl.
it says SPL-1.66.0000 XE
What can i do with that??
(Sorry for the obvious noob questions i'm new to the HTC HD2)
*************
Update :
oke i've gotten a bit further now.
I've installed HSPL
So now i must use a ROM suitable for my phone correct??
Agian sorry for the obvious question
**************
Update:
For some reason it booted fully ,
got the screen white screen with HTC then my provider screen that took a while then the screen turns black.
*remove please*
well i've manged to install HSPL,
and installed a ROM.
now the rom starts up but it shuts down after passing the HTC screen.
Rom i installed is Artemis NLD
I tried rebooting then i get the windows screen wich keeps on for a long while nothing happends
I have no idea what to do next
what radio do you have exactly?
and do you mean THIS rom?
thxx all..
samsamuel said:
what radio do you have exactly?
and do you mean THIS rom?
Click to expand...
Click to collapse
Yes thats the rom i installed,
Hate to ask this : where can i find which radio i use??
bdiepeveen said:
Yes thats the rom i installed,
Hate to ask this : where can i find which radio i use??
Click to expand...
Click to collapse
when the phone tries to start, do you get the small writing, bottom left?
there are three lines, one is the radio (i think the 'r' one, but im not sure, lol)
if you arent sure, you can always pick a radio from the ROM thread, he mentions three or four he tests with, get one of them and flash it from bootloader.
Hard reset dude....
Good luck...
oke my Radio rom is:
2.07.51.22.~2
So i need to flash the radio rom to a newer version?
I've got it working agian
I took the following :
Leo_RADIO_15.37.50.07U_2.10. 50.08_2
Atermis Rom
And now its working again
Thanks for all the assistance.
Just a quick question tough,
Wich rom would you advise??
glad its working. i won't recommend a rom,i recommend you try a few and see what works best for you.

Categories

Resources