Related
For a while now, my Wizard's touch screen would only work when the slider was closed. It would be completely unresponsive when it was opened. Now the touch screen has stopped working all together.
Is there any way to fix this? Does anyone know what would cause this?
touch screen unresponsive
works just fine in vertical
works for a couple of seconds in horizontal to.
fix?
(had original 2.26 TMOB NL ROM and now using 1.05 Button- dosnt seem to be that)
issues seems solved
ok... been doing a lot of reading in the last 2 days
and found a solution that said:
clean the border between the screen and the plastic housing with a business card or such, get the dirt out.
didnt think it was the problem i had, but i found no other solutions- tried it- and it works... screen seems oki-dok again....
so, good luck to who ever else runs into this....
and keep u posted if it comes back.
You are life saver (actually my Wizard should say that). I have done many things in the last week or so... massaged the screen, reflashed few times, checked for loose connections and nothing seems to be working. Until this idea to clean the dirt. I was skeptical at first, but now:
THANK YOU, THANK YOU, THANK YOU!!!!
Works perfect.
hi there. i have the same problem with the touch screen. i tried to clean the dust with the plastic card but it's not working. what should i do?? i need help
p.s. i also had a problem when my wizard was opened, my touch screen didnt work. Now the touch screen has stopped working all together.
I have also ran into the same problem, except that my touch screen works only about 10% of the time. I have tried to clean the border without any luck.
Lol, this needs stickied in every topic here. I have the excuse of having no internet access till today, but my wing touchscreen died on me. I called t-mobile multiple times, including their direct buisness support line. Assurion wanted $110 for a replacement phone. My account is only 40 days old. So I got transfered to retentions and have a replacement wing in the mail already. Gave the retentions rep a kudos for resolving my issue without me having to take the 110 bucks to sprint to get a mogul and faster interwebs. Thanks guys!
well, my htc touch a while developed this look in certain lighting conditions with the screen backlight off that can only be described as looking like a opilspill, and i thought it might of been the touchscreen layers seperating, but untill just now it still worked fine so i wasnt too bothered, was working great one miniute and the next miniute i went to send a text and the touchscreen wasent responding. i tried a hard and soft reset , nothing and right now im extremly pi**ed off as i loved that phone and havent really got the cash for another one .
my question is what is the lightlyhood that the only thing gone is the digitiser, and has anyone used any of them dodgey chinese sellers on ebay as thats the only place i can fine them i dont wanna be leaving XDA developers so early
any advice will be aprieciated, feel like a famy pet jus died or summan
EDIT: dont think its relevent but im using the blue elves rom v6 i think
well you can try mymobiler and use your pc to try and correct any issues
i think the issue might be hardware as i have done a hard reset, did try using mymobiler just to use the phone after i had hard reset, but its either a bug or the way that the touchpads calibrated that i cant now after a hard reset.
what happens is the inital tap the screen to setup, that works, but mymobiler wont allow me to to the screen taps to calibrate.
Back to the box than till i can find a faulty one on ebay in the uk
Find another faulty one of eBay? Why not send it in to HTC and make use of their manufacturer warranty, hopefully its still covered. But worth a shot.
am going to do just that. it was definatly the digitiser have managed to get tho old digitiser working in a strange way, just pressure over time, am posting on it now, but its gonna need replacing but at least I got my phone back thanks everybody
what you are describing is newton rings
Beware of HTC's large screen phones.
Any force applied to them, even taking off a screen protector, is enough to produce "newton rings" and the screen stops responding to touch.
Not much use for a touch screen phone.
HTC refuse to cover this by warranty and refuse to negotiate. expect to shell out up to $500 to repair it. With no guarantee that the next screen won't do the same thing.
Design or Materials fault but they won't cover it by warranty.
well at least i know what caused it, sorted it a while back by replacing the digitsier myself. ended up getting it from the chinese ebay seller. before that i took out the digitiser, applied weight to the top and froze it lol, it worked but i replaced the digitiser anyway.
thanks for all your replys
Hey Guys, Can anyone help ?
I plugged my phone in to charge overnight like normal and when i unplugged it next morning the screen will not respond to taps. There are no cracks or damage to the screen and it hasnt had a bump.
A hard reset gets me as far as the calibration screen but again, cant do it.
Does anyone either have any ideas or can anyone recommend a good repair place in the uk ??
thanks.
Andy
AndyG said:
Hey Guys, Can anyone help ?
I plugged my phone in to charge overnight like normal and when i unplugged it next morning the screen will not respond to taps. There are no cracks or damage to the screen and it hasnt had a bump.
A hard reset gets me as far as the calibration screen but again, cant do it.
Does anyone either have any ideas or can anyone recommend a good repair place in the uk ??
thanks.
Andy
Click to expand...
Click to collapse
Hi Andy,
If you are familiar with rom flashing you could try it before sending to repair in case it's software related.
Good luck
Arrrrrrggghhh-bloody backlight/touch bricked!
I have the same issue and it's driving me nuts!!
pressing the screen bottom left quite hard puts the backlight back on but it goes off as soon as I take my finger off.
Having done a web search, it appears that this may be a firmware issue, but if so, why, after 9 months of trouble free use, has it only just happened?
I'd be very interested if anyone else has solved this issue. Is there patch or is it a hardware issue?
My otherwise excellent touch is effectively bricked-any help or suggestions at all would be appreciated!
A fix (sort of)
I bit the bullet and ordered a replacement LCD module online and fitted it. It worked, proving that there was indeed an issue with the original. Problem is, the quality of the new one is really bad so DON'T buy a replacement online is my advice. I've now sent my beloved Touch back to HTC to get it fixed...
Hopefully I'll have it back and working soon.
FIXED !
i know this is gonna sound weird but i bought a BENQ_E72 while my touch wasnt working and i kinda forgot about the touch in the meantime. Yesterday i came back to the touch and lo and behold its working perfectly. Screen align is working, taps are going through and i cant see a problem.
Now i have read a thread about the Digitizer filling up with dust and yes my front case does have 2 hairline cracks in it so i am thinking a strip apart, new case and clean and go from there if it does it again. Odd how leaving it to discharge compleely for a couple of months has 'cured' the problem
Just thought i would share this with you
AndyG
touchscreen was working today morning, took battery out for 2 hours, turned it back on and it was working abit weird, and now i cant press any touchscreen buttons atall!
So no softkeys (pick call, home etc.) and nothining on the big screen! I can turn on the phone, press the power button and volume buttons, see my home screen get calls etc.. hard reset twice, took battery out, nothing does it .. gonna try flash it but dont think itll do it ... and ideas?
Im in uk aswell if that makes a diff
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
I had the same thing, a oily spot, but it was there for months, then i noticed another new spot (looked like a tiny tiny burn) and thats when it stopped working completely... ive ordered a new screen which should be comming in a few days, im hoping thats the issue
will let you know if it works ....
keep me updated if you find anything
thanks!
NECROSTONE said:
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
Click to expand...
Click to collapse
download and install this _HTC Touch HD_TouchHD system.exe
BOLDESH said:
download and install this _HTC Touch HD_TouchHD system.exe
Click to expand...
Click to collapse
whats it do? and where from??
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
ok basically i received a new digitizer today (the actual touchscreen) ...
i dismantled the whole phone using the service manual and some video some guy made (VERY HELPFUL, if anyone wants it for any reason i can post a link), ok so i got rid of all the top bits, the circuit boards (or watever theyre called)
I got down to just the bezel, lcd and digitizer (dont know what a bezel is, the lcd is where the display actually is and digitizer is directly stuck ontop of that)
Apparently when replacing the screen, htc have made it so that you have to replace all three of those parts instead of individual ones, but you can buy them seperately so i thought i'd hero it.
i poked out the screen from the frame (some chewingum like stuff holding it in) then i started peeling off the digitizer (if you get one and want to try it you'll know where to peel) ... this was a mistake tho cause the lcd is unbelievebly sensitive so while peeling off it left scratches on the lcd, and me not knowing the lcd is sticky tried to wipe them and use a dust free cloth, which left alot of crap on the actual lcd!
i managed to get the digitizer off and ripped the cable that goes from digitizer to whatever reads our fingers on the screen, took it all off, placed the new one directly ontop and fed the wire exactly how it was for the first screen.
Put it all together again
Now I did mess up my screen badly, but in a good way! .. i now have full touchscreen working (smoother than ever) but my LCD display is near enough gone, so it looks like the screens really really dark, and i have to tilt it at certain angles to see the screen..
After all of this i now have a touch hd i can controll from my pc (using mymobiler) so i can recieve calls, send texts all from my pc when connected thru active sync, can even play teeter ... but not really the same!
I wouldnt recomend anyone to try what i did, although i think its worth the risk as I would have to replace the lcd anyways if i wanted a new screen in the first place... and who knows you might be able to peel the digitizer off clean (NEVER EVER EVER TOUCH LCD WITH ANYTHING!!!).
It all cost me around 10-15£ for the digitizer and screwdrivers and alot of hours dismantling phone compared to 50-100£ for a new lcd.
I am either going to get a new lcd now so i can actually see the screen, or get a new phone.
Sorry for the essay but hopefully this helps someone in any similar situation
if i do get a new lcd will post how it goes and if it sorts out everything
if anyone knows of any other reasons why my lcd would be so dim (brightness is 100%) accept for me getting carried away with it ... help would be appreciated
the_cool said:
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
Click to expand...
Click to collapse
Yeah swirly oil marks is how myne started ... i think i finished off the screen by trying to press hard on the mark to try and clear it .. . so be careful with it.. but think that overall the screen had seen better days (course only a few weeks after warrenty finishes) ... all conections inside were ok aswell
doczyus said:
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
Click to expand...
Click to collapse
Same here. Touch screen not working. Phone never flashed, droped,...
Any solution?
unfortunately, a friend of mine changed the touchscreen without success. Phone was in perfect state, no drop, no flash. Just the touch not responding. I'm not sure that changing whole part lcd+digitizer solve the problem.
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
igothtc2 said:
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
Click to expand...
Click to collapse
use ScreenCal to fix it, hopefully it can help you
Hakim Rahman said:
use ScreenCal to fix it, hopefully it can help you
Click to expand...
Click to collapse
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
igothtc2 said:
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
Click to expand...
Click to collapse
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Hakim Rahman said:
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Click to expand...
Click to collapse
Just did the hard reset. When it asked me to align the screen, I just couldn't align the top left corner. I had to press it like 50 times before cross went to the lower corner. Otherwise, after the align it's good for about couple of seconds and then it's just pressing all over.
I thought I had just some software issues because the screen wasn't dead, it responded to my touch. So, I'll probably have to buy a new screen and digitizer, right? Or do you have any other ideas?
Thank you again for your help!
Regards
firstly screencal installs calibration settings not for blackstone so do not install it, no point. (btw it also increases device touch sensitivity)
secondly you guys should try and install the calibration settings for blackstone, basicly what the align screen does, not sure where to find them for download but i could post the registrys if someone wants to make a .cab from them. (atm i cba making the .cab but i am able to do it )
if the calibration settings do not work i think it is best to buy a new lcd package (or buy new device and give me old one for spares oj)
Rn
hi buddy ! What you mean GSensorCalibrator ??
i didnt mention anything about gsensor calibration dude.
tried and tested screencal the other week and it screwed my blackstone.
install these instead:
*screen calibration, sets the blackstone touch points: (aligning the screen)
if you install a cab with these registrys it should fix the alignment problem.
(if it doesnt then its hardware issue = lcd etc)
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:8
"CalibrationData"="511,542 183,881 183,198 834,197 833,880"
*this one will maximise the touch sensitivity for those that want it:
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:0
Rn
Does anyone have a recommendation where you can buy a digitizer and lcd from?
The top part of my phone does not respond to touch anymore... it is impossible to bring down the notification bar... and once in a while the whole screen goes unresponsive.. tried factory reset but still the same problem..
am having the same problem since 2 days back
after reading some of the posts i found that the Digitizer For HTC G6 Legend A6363 should be replaced with new one i ordered mine from ebay
ebay.com/sch/i.html?_from=R40&_trksid=p5039.m570.l1313&_nkw=Digitizer+For+HTC+G6+Legend+A6363&_sacat=See-All-Categories
waiting for the item to be delivered
I've also got a touchscreen issue: the area of the notification power widgets is unresponsive... the rest of the screen works fine, but I don't know for how long :/
nnssxx said:
I've also got a touchscreen issue: the area of the notification power widgets is unresponsive... the rest of the screen works fine, but I don't know for how long :/
Click to expand...
Click to collapse
Do you have widgetlocker, by any chance ?
Or a lockscreen replacement which disable the notification bar during the "slide to unlock" state ?
I didn't know there was such thing as widgetlocker. I use CM7 latest nightly, never seen that thing.
I also facing this problem from last 2 weeks and i also think this is digitizer problem. If anyone else found the solution else changing the digitizer, then please post.
This is beautiful phone but htc added a poor quality things in it, due to which many users facing such problems.
Nah.. I dont think its because of widget locker.. its the digitizer..
well that's a shame, gotta buy a new digitizer on ebay after just over 1 year of use...
I know.. this sucks... Im planning to upgrade though.. Any of u guys have any suggestion?
Depends on your carrier if you want suggestions for an upgrade.
...but that would drive the post off-topic.
Sent from my HTC Legend using XDA App
I have the same problem. my screen doesnt work anymore because some water got in from the grill above the screen :S
should I try to take apart and dry off or shall I buy a new digitizer directly?
I think it may be a good idea to try disconnecting your digitizer and reconnect it as it just might be helping. I did it on my girlfriends legend and it has been working perfectly ever since. Maybe a good idea to at least try that before buying a new one. So i guess it could be in the connector to? At least this worked for me.
My touch screen dosent work at times. but after rebooting the phone the problem becomes solved. But the problem comes again after a week or so. Any suggestions guys??
Earayil said:
My touch screen dosent work at times. but after rebooting the phone the problem becomes solved. But the problem comes again after a week or so. Any suggestions guys??
Click to expand...
Click to collapse
I also have this problem, but if I wait a couple of minutes the touchscreen
becomes responsive again. Half of the screen works when it's unresponsive (right half of the notification bar and down). It's quite annoying but I cannot afford a new phone at the moment.
I'm also wondering if this might be temperature related, this problem reoccurred very often during the summer but stopped during the winter. But now (spring) it's back again.
My problem got worse and the phone became totally unresponsive, changed it, got a new phone.
Tanayar said:
I also have this problem, but if I wait a couple of minutes the touchscreen
becomes responsive again. Half of the screen works when it's unresponsive (right half of the notification bar and down). It's quite annoying but I cannot afford a new phone at the moment.
I'm also wondering if this might be temperature related, this problem reoccurred very often during the summer but stopped during the winter. But now (spring) it's back again.
Click to expand...
Click to collapse
exact same problem here, mine works when it feels like working, totally random, I simply can't understand why, I doubt it's the temperature... I think its in the device theres something wrong, I smack it numerous time and it works right after a big smack on the screen, or rub your whole hands on the screen, also, the angle you are holding the phone affects this problem, if none of these work, a phone restart always makes it work at the beginning. Oh boy did my phone took and taking much beating... oh well, I wish I could permanatly fixed the problem here, as I was thinking of handing the phone to my brother when I upgrade, I'm using CM 6.1.
I still recommend the same thing that i posted earlier here, her screen still works perfect.
I had the same problem few months ago. The problem is with the touch digitizer. I bought a digitizer on ebay and replaced it myself. After that my phone has been working fine. Its not that hard to replace it if you have a small knowledge about hardware.
I use to get that unresponsive screen issue only in the summertime, plus it gets worse if I add humidity (read: sweat). I just need to give it some time then to dry off/ cool down outside my pocket, and it's all fine again.