Hi , I could really need some help with a problem i have. I bought an external keyboard (Keysonic ACK-595BT nordic) to use with my diamond2, as i use it alot to write on. Problem is that the nordic letters ø æ å is not working. I tried the keyboard on my laptop and the letters are working fine there, so i guess it must be something to do with my Diamond2, probarbly some configuration.
I have searched and read a lot of posts here, but cause i''m a total noob on these things, i dont know where to start, and could really need some help. I checked in the registry on my phone and it shows the right language code. What should i do then?
Thanks
no one knows?
Related
I’ve been using an Ipaq hx2750 for over a year now, but feel a huge need of having a keyboard. Strongly considering the Wizard (the Qtek or K-Jam), I’m interested in finding out more about the ability to customize the keyboard layout to support Swedish characters (å, ä and ö).
Surfing to www.myqtek.com and choosing Swedish, brought me to the insight, that there is a Swedish version of the device. This means both Swedish keyboard and ditto OS. Since I’d prefer my OS in English, I wonder whether it is possible to change the normal WWE version’s keyboard mapping to match the picture found on this web site (which is the Swedish version of the device).
I’ve read about this keyboard mapper, but need to get confirmed that it can be done.
If it is possible to generate the mentioned Swedish characters on a “native” WWE Wizard's keyboard (without any patches or remapping), it would also be of interest and enough info for me to buy the English version.
On www.myqtek.com, I also found the following file, which was supposed the remap the keyboard to Swedish in case a hard reset was done on a device (however, this might only relate to units with the Swedish OS). The file is located here http://www.myqtek.com/downloadFile....dic_keyboard_1102.sa.cab&node=5040&media=5037.
If someone has a “clean unit” and don’t mind doing a Hard Reset to retrieve the English keyboard setting, I’m very interested in finding out whether the patch generates a Swedish keyboard map on an English unit as well.
I’ve spent quite a few hours scanning this forum on the mentioned issue, but without being able to narrow it down just to the keyboard remapping (most posters are interested in altering the whole ROM into another language as well).
Thanks in advance for any suggestions or comments!
Best regards,
Bateman
I cant answer directly to your question, but in finland there is few shops, which are selling qtek 9100 wwe with swedish keyboard. Its little bit more expensive than wweOS/wwe keyb (something like 10-15euros).
Other product which you should look is Skandinavisk tastatur
http://www.epocket.no/tastatur/
anco said:
Other product which you should look is Skandinavisk tastatur
http://www.epocket.no/tastatur/
Click to expand...
Click to collapse
Thanks for the reply! The suggsted link changes the soft keyboard into Swedish. Additionally to change the slide-out keyboard's layout into Swedish, simply run the small program found on www.myqtek.se. The small application can be removed like any other program through "Remove programs" in Start->Settings.
I now have a WWE Qtek9100 with Swedish layout on the hardware keyboard.
My phone, Blue Angel has it, but my girlfriends Wizard doesnt. Is this normal?
Doesnt the wizard have letter recongnizer?
When you bring up the softkeyboard there is an up-arrow next to the task bar keybard icon. Tap that and the list of possible entry methods are displayed, including 'Letter Recognizer'
But its not there!
check it out
and thanks for your reply
Ahh thats a woman thing ... shes probs tidied it away somewhere and forgot where she put it
Seriously though, its a bit strange, mine deffo has it plus another couple of options.
I notice its not in english language, perhaps thats why ?
Just a thought... Could it because it's Czech? If she switches localization to English, does it show up then?
Just a thought... Could it because it's Czech? If she switches localization to English, does it show up then?
Well I've got the same problem and I've tried both the Danish version (since I'm from Denmark :lol: ) AND the english localization and neither of them works
I didn't work with the original ROM and it still doesn't work with the latest ROM.
Strangely enough, in the (danish) manual there's a whole section about letter recognition...hmmmmm VERY strange :?
If ANYONE could give an answer to this I'll be greatfull - I really could use that app'!!!
The Letter recognizer NOR the Block recognizer are present in localized (ie non WWE) ROM's.
Use a WWE Rom if you realy want it!
Hey guys!
First I'd like to say, that this forum is awesome - never seen so much know-how on a forum before.
I got a problem with my SPV-M3000, that i bought in Poland with a QWERTY Keyboard layout. I've flashed a German Qtek 9100 Rom on it, but the layout got messed up. It's QWERTZ and not QWERTY and all the symbols (like @ or $) are not in the position they should be.
Well i've read a lot of threads with the keyboard-layout problem. Tried the registry-hack but it didn't work for me. Then I tried AEKMAP, but I don't know how to configure it - do I have to buy it? I've found a WWE *.AEK File on the website, but the layout is still messed up but in another way. Plz somone help me! It sux to write something with a false keyboard layout!
No one got a solution 4 my problem?
try this article you will need to find teh correct country code ms have it on there iste i have a uk model but need to use the US version to work
http://forum.xda-developers.com/showthread.php?t=280042
Hi,
I have a Kaiser (T-Mobile MDA III) with a German keyboard (QWERTZ) layout.
The Kaiser
Since I'm Dutch I changed to ROM to English and changed the keyboard to German layout via Start - Programs - Utilities- Device Config - Advenced Config - Keyboard.
But still when I press the "z" key the "y" is displayed.
What can be done about this?
I'm running L26_WM6 (HTC Kaiser WWE version_3) Kaiser has SPL running.
Is it also possible to switch hardware german keyboard against english one? And if yes where can they be bought?
Thanx
hi, i think that is what you looking for.
i've found it after hard searching days...
the XDA_JCE... cab makes the hardware keyboard 100% german, (FN)+SPACE is also working!
try it.
a lot of people have this problem, too. help me share this file in other threads, if it works on your kaiser.
klick
double post
well i have the same problem , my device is qwerty and i would like to have the keyboard in azerty
Any solutions für the Screenkeyboard?
shell said:
Any solutions für the Screenkeyboard?
Click to expand...
Click to collapse
TRy Resco Keyboard or PCM Keyboard.
all those available cabs or reg strings doesnt work anymore. I think this issue has been somehow introduced with a newer OS bulit. I do have the same problem with my wizard hardware keyboard....
regards
This is the solution for my German Kaiser running WM6.1 WWE
For this problem on Wizard. http://forum.xda-developers.com/showthread.php?t=290967
Works on my G3 and G4 with WM6 an WM6.1 WWE
MiZi666 said:
hi, i think that is what you looking for.
i've found it after hard searching days...
the XDA_JCE... cab makes the hardware keyboard 100% german, (FN)+SPACE is also working!
try it.
a lot of people have this problem, too. help me share this file in other threads, if it works on your kaiser.
Click to expand...
Click to collapse
Hey everyone.
I know, that the last post was 2 years ago, but I've got huge problem with my HTC TyTN II. I reseted the device to manufacturer settings and after this action, I can't bring my hardware keyboard to be german again. My Kaiser is running on shifu_4.0 WWE ROM-Version (don't know, what it means, i've bought it like this) and this ROM is english. Before hard reset, i've installed this XDA_JCE... package and it worked just fine. Now I get the "Z" on the right place and "ß" is also available, but [FN] and SPACE are not working. I really type a lot on device and need hardware-keyboard with working Symbols. Do anyone know, how i deal with this problem.
Thanks a lot
Arti
Artishock said:
Hey everyone.
I know, that the last post was 2 years ago, but I've got huge problem with my HTC TyTN II. I reseted the device to manufacturer settings and after this action, I can't bring my hardware keyboard to be german again. My Kaiser is running on shifu_4.0 WWE ROM-Version (don't know, what it means, i've bought it like this) and this ROM is english. Before hard reset, i've installed this XDA_JCE... package and it worked just fine. Now I get the "Z" on the right place and "ß" is also available, but [FN] and SPACE are not working. I really type a lot on device and need hardware-keyboard with working Symbols. Do anyone know, how i deal with this problem.
Thanks a lot
Arti
Click to expand...
Click to collapse
you'll find a way out at http://forum.xda-developers.com/showthread.php?t=394857
(read the posts by khals)
Nothing works. I've tried every possible method with changing Registry, installing other cab's etc. The problem is, I always had Symbian before and don't really know, what I've got to do. Should I perhaps reinstall the ROM? Perhaps on the base of native german one? Do someone know a god one?
Thanks
Arti
Artishock said:
Nothing works. I've tried every possible method with changing Registry, installing other cab's etc. The problem is, I always had Symbian before and don't really know, what I've got to do. Should I perhaps reinstall the ROM? Perhaps on the base of native german one? Do someone know a god one?
Thanks
Arti
Click to expand...
Click to collapse
if so try to install the cab file below...
hopefully this can help you
Hi,
I am new to the forum but a real cellphone geek
I have searched a lot for a swedish keyboard for my HD2 (that has the letters åäö as original buttons and not sub commands on a and o)
Does anyone know if there are any third party keyboards?
I would also like to know if anyone has tried Opera 10 beta on HD2. I tried it but to me it appeard slower than 9.7...
Appreciate any help to get this excellent phone even better!
Andreas
awallgren said:
Hi,
I am new to the forum but a real cellphone geek
I have searched a lot for a swedish keyboard for my HD2 (that has the letters åäö as original buttons and not sub commands on a and o)
Does anyone know if there are any third party keyboards?
I would also like to know if anyone has tried Opera 10 beta on HD2. I tried it but to me it appeard slower than 9.7...
Appreciate any help to get this excellent phone even better!
Andreas
Click to expand...
Click to collapse
Im searching to, really annoing without the åäö letters. Takes time to write on the device..
bariz143 said:
Im searching to, really annoing without the åäö letters. Takes time to write on the device..
Click to expand...
Click to collapse
tap and hold A for Å and Ä. Tap and hold O for Ö
to install swedish dictinary and T9 install my cab from this thread.
then swedish is working perfect.
been using this since beginning of time for my HD2
PS. reading the manual won't hurt sometimes
smaberg said:
tap and hold A for Å and Ä. Tap and hold O for Ö
to install swedish dictinary and T9 install my cab from this thread.
then swedish is working perfect.
been using this since beginning of time for my HD2
PS. reading the manual won't hurt sometimes
Click to expand...
Click to collapse
tryin it right now, get to 2 in a bit
i have one problem. i dont know where to put those files
btw i dont think that your cab is a keyboard with the swedish letters.
like awallgren asked : I am new to the forum but a real cellphone geek
I have searched a lot for a SWEDISH KEYBOARD for my HD2 (that has the LETTER ÅÄÖ as original buttons and NOT SUB COMMANDS on A and O)
best regards
You can try FingerKeyb-2.1-WVGA.cab
Just google for it.