Database Users

How to generate Swedish characters with keyboard

I’ve been using an Ipaq hx2750 for over a year now, but feel a huge need of having a keyboard. Strongly considering the Wizard (the Qtek or K-Jam), I’m interested in finding out more about the ability to customize the keyboard layout to support Swedish characters (å, ä and ö).
Surfing to www.myqtek.com and choosing Swedish, brought me to the insight, that there is a Swedish version of the device. This means both Swedish keyboard and ditto OS. Since I’d prefer my OS in English, I wonder whether it is possible to change the normal WWE version’s keyboard mapping to match the picture found on this web site (which is the Swedish version of the device).
I’ve read about this keyboard mapper, but need to get confirmed that it can be done.
If it is possible to generate the mentioned Swedish characters on a “native” WWE Wizard's keyboard (without any patches or remapping), it would also be of interest and enough info for me to buy the English version.
On www.myqtek.com, I also found the following file, which was supposed the remap the keyboard to Swedish in case a hard reset was done on a device (however, this might only relate to units with the Swedish OS). The file is located here http://www.myqtek.com/downloadFile....dic_keyboard_1102.sa.cab&node=5040&media=5037.
If someone has a “clean unit” and don’t mind doing a Hard Reset to retrieve the English keyboard setting, I’m very interested in finding out whether the patch generates a Swedish keyboard map on an English unit as well.
I’ve spent quite a few hours scanning this forum on the mentioned issue, but without being able to narrow it down just to the keyboard remapping (most posters are interested in altering the whole ROM into another language as well).
Thanks in advance for any suggestions or comments!
Best regards,
Bateman

I cant answer directly to your question, but in finland there is few shops, which are selling qtek 9100 wwe with swedish keyboard. Its little bit more expensive than wweOS/wwe keyb (something like 10-15euros).
Other product which you should look is Skandinavisk tastatur
http://www.epocket.no/tastatur/

anco said:
Other product which you should look is Skandinavisk tastatur
http://www.epocket.no/tastatur/
Click to expand...
Click to collapse
Thanks for the reply! The suggsted link changes the soft keyboard into Swedish. Additionally to change the slide-out keyboard's layout into Swedish, simply run the small program found on www.myqtek.se. The small application can be removed like any other program through "Remove programs" in Start->Settings.
I now have a WWE Qtek9100 with Swedish layout on the hardware keyboard.

Wizard Keyboard map incorrect after changing rom

I recently reflashed my o2 xda mini s with the far superior imate rom. it's much better however the mapping on my slide out keyboard is now slightly wrong.
all of the unshifted keys are fine (letters, arrows, backspace etc) but when i hit shift, many of the symbols are bounced one key over. For example Shift A should be ! and is now ~. Shift S is now ! and should be @ etc etc.
Where can i change/update/hack this ?
thanks,
malty

Yeah had the same problem too. aAfter upgrading to the latest Qtek rom on my O2 xda mini s. Will appreciate a solution to rhis problem

You probably just need to change the keyboard locale in the registry. Just search the forum or look at the Wiki and you will find it.

cant find how/where to do that, anyone help ? thanks

fixed it using the tool in this thread,
http://forum.xda-developers.com/viewtopic.php?t=39725
set keyb to uk english ticked the box and rebooted
perfect now
thanks

SPANISH keyb working as ENGLISH

Hi there to every gadget fan around!.
I'm a proud owner of a HERM200, Vodafone V1605 really.
The problem is that I flashed an english WM6 ROM and I forgot my keyboard has the "ñ", so I flashed the Schap's Spanish WM6 ROM (which, by the way, works like silk) but the keyboard keeps reacting as if it was an ENGLiSH keyboard. I read all the wiki and I tried the solutions explained there
- [HKEY_CURRENT_USER\ControlPanel\Keybd]
"Locale"="040a" (for Spanish)
This didn't work at all
- [HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] this reg key does not exist in my PDA so I cannot change it.
WHAT CAN I DO ABOUT THIS?
Also, in HTC Home I cannot retrieve the weather status. I'm actually using a PUSH connection which let's me navigate with IExplorer and receive e-mail too, Why is it impossible to retrieve the weather too???
Thanks to all of you which already helped me out without even knowing it.
And thanks in advance to anyone who can light up my way on this issues!.

I can't believe no one can help me out!!
But thanks for trying!

So, this help may be minimal, but I don't know the direct answer to your question, but I am sure it has been addressed in the forums. I just wanted to suggest you use the Google forum search tool (linked in my Signature). It tends to be very effective at finding applicable results.

Thanks!, I'll give it a try!

Kaiser keyboard language problem

Hi,
I have a Kaiser (T-Mobile MDA III) with a German keyboard (QWERTZ) layout.
The Kaiser
Since I'm Dutch I changed to ROM to English and changed the keyboard to German layout via Start - Programs - Utilities- Device Config - Advenced Config - Keyboard.
But still when I press the "z" key the "y" is displayed.
What can be done about this?
I'm running L26_WM6 (HTC Kaiser WWE version_3) Kaiser has SPL running.
Is it also possible to switch hardware german keyboard against english one? And if yes where can they be bought?
Thanx

hi, i think that is what you looking for.
i've found it after hard searching days...
the XDA_JCE... cab makes the hardware keyboard 100% german, (FN)+SPACE is also working!
try it.
a lot of people have this problem, too. help me share this file in other threads, if it works on your kaiser.

klick
double post

well i have the same problem , my device is qwerty and i would like to have the keyboard in azerty

Any solutions für the Screenkeyboard?

shell said:
Any solutions für the Screenkeyboard?
Click to expand...
Click to collapse
TRy Resco Keyboard or PCM Keyboard.

all those available cabs or reg strings doesnt work anymore. I think this issue has been somehow introduced with a newer OS bulit. I do have the same problem with my wizard hardware keyboard....
regards

This is the solution for my German Kaiser running WM6.1 WWE

For this problem on Wizard. http://forum.xda-developers.com/showthread.php?t=290967
Works on my G3 and G4 with WM6 an WM6.1 WWE

MiZi666 said:
hi, i think that is what you looking for.
i've found it after hard searching days...
the XDA_JCE... cab makes the hardware keyboard 100% german, (FN)+SPACE is also working!
try it.
a lot of people have this problem, too. help me share this file in other threads, if it works on your kaiser.
Click to expand...
Click to collapse
Hey everyone.
I know, that the last post was 2 years ago, but I've got huge problem with my HTC TyTN II. I reseted the device to manufacturer settings and after this action, I can't bring my hardware keyboard to be german again. My Kaiser is running on shifu_4.0 WWE ROM-Version (don't know, what it means, i've bought it like this) and this ROM is english. Before hard reset, i've installed this XDA_JCE... package and it worked just fine. Now I get the "Z" on the right place and "ß" is also available, but [FN] and SPACE are not working. I really type a lot on device and need hardware-keyboard with working Symbols. Do anyone know, how i deal with this problem.
Thanks a lot
Arti

Artishock said:
Hey everyone.
I know, that the last post was 2 years ago, but I've got huge problem with my HTC TyTN II. I reseted the device to manufacturer settings and after this action, I can't bring my hardware keyboard to be german again. My Kaiser is running on shifu_4.0 WWE ROM-Version (don't know, what it means, i've bought it like this) and this ROM is english. Before hard reset, i've installed this XDA_JCE... package and it worked just fine. Now I get the "Z" on the right place and "ß" is also available, but [FN] and SPACE are not working. I really type a lot on device and need hardware-keyboard with working Symbols. Do anyone know, how i deal with this problem.
Thanks a lot
Arti
Click to expand...
Click to collapse
you'll find a way out at http://forum.xda-developers.com/showthread.php?t=394857
(read the posts by khals)

Nothing works. I've tried every possible method with changing Registry, installing other cab's etc. The problem is, I always had Symbian before and don't really know, what I've got to do. Should I perhaps reinstall the ROM? Perhaps on the base of native german one? Do someone know a god one?
Thanks
Arti

Artishock said:
Nothing works. I've tried every possible method with changing Registry, installing other cab's etc. The problem is, I always had Symbian before and don't really know, what I've got to do. Should I perhaps reinstall the ROM? Perhaps on the base of native german one? Do someone know a god one?
Thanks
Arti
Click to expand...
Click to collapse
if so try to install the cab file below...
hopefully this can help you

enable nordic / norwegian letters on external keyboard

Hi , I could really need some help with a problem i have. I bought an external keyboard (Keysonic ACK-595BT nordic) to use with my diamond2, as i use it alot to write on. Problem is that the nordic letters ø æ å is not working. I tried the keyboard on my laptop and the letters are working fine there, so i guess it must be something to do with my Diamond2, probarbly some configuration.
I have searched and read a lot of posts here, but cause i''m a total noob on these things, i dont know where to start, and could really need some help. I checked in the registry on my phone and it shows the right language code. What should i do then?
Thanks

no one knows?