Dear all:
I am using HTC Snap GSM version (S521), Generic unlocked version.
there is one annoyance which I don't find in the pocketPC version which I would love to get it fixed. I am not sure where is the problem lies.
The issue is that when I send SMS/MMS, i can't just start typing the name of the person and expect the application automatically filter/complete the name of the recipient. Instead, I have to press "enter" to get into the address book and select the name there.
Is there a way I can just auto complete it by some sort of registry fix?
thanks in advance
Harv
Related
Very often I have to write an SMS with one hand, but it is impossible with Qtek 2020.
I would like to find a software where you can write an SMS with the standard mode (like on normal GSM) with standard numbers 1-9 with letters on them.
I use D9 to find the contact and I think it is very usefull.
When you find a contact and you tap the SMS button near the number it should be very appriciated to have a standard GSM input letter mode (like T9) instead of default SMS client of WM.
Do someone know if a software like this exists?
Thanks for the answer,
Urosh
GO to www.yorch.net and look under "software".
I' don't find any software I described before.
Please let me know which one do you think do what I said.
Thanks,
Urosh
I apologise, I thought it was on yorches site, here is the link for you, it is a superb piece of software and it is FREE. Anybody else wants a brilliant sms program make sure you get it too.
http://www.handango.com/PlatformSea...siteId=1&txtSearch=designlab&zsortParams=true
I just found a bug in this program when running on xda2, if you push "select" button when entering phone number it gives an error, but ig you spend a little time inserting all your often used numbers you can use the drop down becuase it remebers the last 20 numbers that you have used, its worth a little time to set it up becuase it saves a lot of time in the long run.
Actually it's not working at all with my mda ii It says: message sent successfully, but later on-message not delivered Do you have any idea what I could be doing wrong? Is there a special format in which I have to put the number of receipient?
i think, only way is spb fullscreen keyboard or typeango ..
It's working fine on my XDA-II with T-Mobile ROM 1.60. The only thing is that if I am trying to send to local mobile number I have to enter the number with '+', country code etc. while I could use 'short' number with ordinary mobile phone.
Zeljac said:
Actually it's not working at all with my mda ii It says: message sent successfully, but later on-message not delivered Do you have any idea what I could be doing wrong? Is there a special format in which I have to put the number of receipient?
Click to expand...
Click to collapse
Ok, that seemed to do the trick. Tnx a lot, it's working now flawlessly. But, I still have another question -how do you input "+" directly from the SMSwriter. "+" is on the same key as the "0" and whatever I do I keep getting "0". Of coarse, I could call up the keyboard but for that would again need a stlyus
Its a serious shortcoming, its a pity somebody couldnt patch on the ability to select searchwhich would bring up the contacts list, any offers from you programmers please???
unfortunately, found no way around it, I used to enter '+' with soft keyboard using a pen. The only temporary solution which comes to my mind is the list of numbers used to send SMS already (there should be some 25 numbers kept).
Zeljac said:
Ok, that seemed to do the trick. Tnx a lot, it's working now flawlessly. But, I still have another question -how do you input "+" directly from the SMSwriter. "+" is on the same key as the "0" and whatever I do I keep getting "0". Of coarse, I could call up the keyboard but for that would again need a stlyus
Click to expand...
Click to collapse
For me is impossible to use this software only with my fingers.
It has too small dialogue boxes (to find the contact).
For me the best solution would be to have a D9 program that integrates a SMS client which has the same keypad which is at the start of the program (with big buttons) to write to message (when the contact has just been selected).
Bye,
Urosh
All the telephone numbers in my address book are stored in international format e.g. +44 +64 etc.
When I reference my address book to complete the 'To:' section of an SMS it pulls in the number but without the '+' sign. This prevents the SMS being sent without the '+' being entered manually.
Does anyone else experience this problem and has anyone found a fix.
Thanks.
i just made an entry where i put in the +45 in the first part of the telephone nr and then made a new sms and clicked to: and choose the freshly made contact and i get the whole nr in my case +45234567 (random nr dont try to call it at home )
i'm using the 1.66 rom and sync with the outlook 2k i got for free with my xda2 (qtek2020)
Thanks for that. I'm on 1.03.00 so I'll look for a ROM upgrade.
Hi Guys,
Does anyone know how to set the default number for a contact in WM6 ... either I am getting blinder the older I get or the WM6 crew forgot to add it too their OS as I can't see the option when I access a contact with multiple numbers.
Thanks
default number
try this, maybe it works
got to contacts-> brows to the person you want-> push the joystick/navigation button to the right (or left) till it shows the number you want as default.exit. the next time you go to the contact in the list the number you choose is the default one.
this works on my wm6 version
Thanks Brooks.nl that worked perfectly Only wish I could set this in Outlook before it synchronized
Hi folks,
TIM Brasil send me ans SMS with all calls I've lost. useful when I flying, at arrival I saw who call me.
The problem is the SMS contain the caller number, time and date, so I need to search at Contacts to discover the caller name.
Someone know a piece of software able to look at phone number inside of SMS and scan the Contact to match it, showing the name of the contact?
Best regards
Any ideas?
Here in Italy vodafone sends a similar SMS but sets the sender name to the one who attemped to phone you
In this way the phone shows automatically the name (if it has been stored in contacts)
To quickly discover who's the owner you can do two things:
1) if the message contains "This number +xxyyyyyy tried to call you..." press the down key (the number should be selected by a square box) click and your phone should start dialling that number (doing a lookup in contacts and showing the name)
2) you can remember the first numbers (excluding the international prefix) press "red phone", "green phone" (to quickly start the phone application) and use the hermes' smartdialer to quick find who's the owner.
Try using SPB Diary...
Make sure your numbers are in the international format.
LinoX said:
Here in Italy vodafone sends a similar SMS but sets the sender name to the one who attemped to phone you
In this way the phone shows automatically the name (if it has been stored in contacts)
To quickly discover who's the owner you can do two things:
1) if the message contains "This number +xxyyyyyy tried to call you..." press the down key (the number should be selected by a square box) click and your phone should start dialling that number (doing a lookup in contacts and showing the name)
2) you can remember the first numbers (excluding the international prefix) press "red phone", "green phone" (to quickly start the phone application) and use the hermes' smartdialer to quick find who's the owner.
Click to expand...
Click to collapse
In fact this work, but is not exactly what I want, because after a airplane trip the SMS has 3 or 4 numbers. So I need to call/abort 3 for times... It's not elegant way.
thanks.
madhero said:
Try using SPB Diary...
Click to expand...
Click to collapse
What is SPB Diary???
spb diary is a diary application in form of today plugin..
but as far as I know it can't do what you're looking for.
WM developer
Hi Guys,
I'm trying again... Is there a WM developer here who could develop a little plug in to do it?
I think is not complicated, but I don't know WM development to do it.
Of course this could sold to the community.
i had once a siemens sl45 and when i had a phone number in a sms it replaced it by the name in the phonebook... i so miss that feature..... i haven't seen it on other phones since then...
I'm not alone
Finally someone understood what I'm saying.
It's very useful this feature. I'm wondering if someone could develop this.
Anybody as a volunteer?
Maybe this is what you need?
http://www.saman-cz.com/ppc/index.html?drfovrw.html
Its work - It's great
Thanks Moe,
It's exactly what I was looking for.
Thank you.
Is a very very simple application that allows users to send sms by certain voip accounts...
Its my first app running in a PDA and i hope you enjoy.
TvMSmS_v0.2.rar
simple but lots of potential!
I must say, i like it a lot! there is also someone else developing something like this, his name is skandler. his app has some nice extra features, but i like the fast startup of your app, and the use of standard contact list.
do you see any way to integrate (hook) into the normal sms send subroutine?
also, it would be nice to call the app from commandline, so you could make a shortcut to send to specific people.
sender info doesn't work.
hi,
i found a small bug, when you use voipbusterpro.com, and you enter your correct number in your "from" field, the sms you sent has your login name instead of your (verified) number. i don't know about other accounts, i only use voipbusterpro.
other than that... it's fast! and simply works!
Hi thanks for reporting it.
Bug fixed and url updated...
Even the small apps have the rights to have their bugs
I already thought to put the app running from contact list in a append menu, but im starting with c# /sdk 6 and my knowledge of this is very small.I will keep looking and see if im capable to do that.
country code bug
Hi there,
i found another bug. when a contact already has the phonenumber in international style, your app still writes the countrycode first and then the number;
so you get +31+316.... in the case of a dutch number
You have right again
I will put a function to check if the number already start with + char or something.
thanks for your reports
As we see a very small app could have a lot of bugs (blame the coder )
Phone number with international code will ignore country code in conf...
always "Network error"
other IP SMS tools work & also any program that needs GPRS or 3G. Only TVMSMS fails.
Any ideas?
When "network fail" error appear is something about you configuration( he cant make the request to your voip account).Could you tell me what is your voip provider that you are using in software?
Thank you for this great app
Is the app available elsewhere as the rapidshare link is broken.