Hi folks,
TIM Brasil send me ans SMS with all calls I've lost. useful when I flying, at arrival I saw who call me.
The problem is the SMS contain the caller number, time and date, so I need to search at Contacts to discover the caller name.
Someone know a piece of software able to look at phone number inside of SMS and scan the Contact to match it, showing the name of the contact?
Best regards
Any ideas?
Here in Italy vodafone sends a similar SMS but sets the sender name to the one who attemped to phone you
In this way the phone shows automatically the name (if it has been stored in contacts)
To quickly discover who's the owner you can do two things:
1) if the message contains "This number +xxyyyyyy tried to call you..." press the down key (the number should be selected by a square box) click and your phone should start dialling that number (doing a lookup in contacts and showing the name)
2) you can remember the first numbers (excluding the international prefix) press "red phone", "green phone" (to quickly start the phone application) and use the hermes' smartdialer to quick find who's the owner.
Try using SPB Diary...
Make sure your numbers are in the international format.
LinoX said:
Here in Italy vodafone sends a similar SMS but sets the sender name to the one who attemped to phone you
In this way the phone shows automatically the name (if it has been stored in contacts)
To quickly discover who's the owner you can do two things:
1) if the message contains "This number +xxyyyyyy tried to call you..." press the down key (the number should be selected by a square box) click and your phone should start dialling that number (doing a lookup in contacts and showing the name)
2) you can remember the first numbers (excluding the international prefix) press "red phone", "green phone" (to quickly start the phone application) and use the hermes' smartdialer to quick find who's the owner.
Click to expand...
Click to collapse
In fact this work, but is not exactly what I want, because after a airplane trip the SMS has 3 or 4 numbers. So I need to call/abort 3 for times... It's not elegant way.
thanks.
madhero said:
Try using SPB Diary...
Click to expand...
Click to collapse
What is SPB Diary???
spb diary is a diary application in form of today plugin..
but as far as I know it can't do what you're looking for.
WM developer
Hi Guys,
I'm trying again... Is there a WM developer here who could develop a little plug in to do it?
I think is not complicated, but I don't know WM development to do it.
Of course this could sold to the community.
i had once a siemens sl45 and when i had a phone number in a sms it replaced it by the name in the phonebook... i so miss that feature..... i haven't seen it on other phones since then...
I'm not alone
Finally someone understood what I'm saying.
It's very useful this feature. I'm wondering if someone could develop this.
Anybody as a volunteer?
Maybe this is what you need?
http://www.saman-cz.com/ppc/index.html?drfovrw.html
Its work - It's great
Thanks Moe,
It's exactly what I was looking for.
Thank you.
Related
Hi
I tried to search in magician forum about this, but it seems not find any similar to this
Have you ever have a feeling to find name by phone number? as for instance I got miss call from 123 111 number but does not show any name in my missed call list
so I open up contacts, but unfortunately, it only allows me to search by name not by phone number...
any idea how to do this?
THanks so much
televisi said:
Hi
I tried to search in magician forum about this, but it seems not find any similar to this
Have you ever have a feeling to find name by phone number? as for instance I got miss call from 123 111 number but does not show any name in my missed call list
so I open up contacts, but unfortunately, it only allows me to search by name not by phone number...
any idea how to do this?
THanks so much
Click to expand...
Click to collapse
Use the "Find" from Programs, type phone number, select "Contact" and voila!
Ow... I didn't realize that this possible as last time I tried them but resulting nothing (probably the number is not exist there and I assumed this function is not working)
Sorry questioning this question as I should read my manual more
you have to put number exactly as it writen in contacts... +38039....
and name will appears
Yea, I just notice that you need to enter exact number (with / without space) otherwise will not show anything... totally a bad search function...!!!
you can use Smart Dial: push green key then, just digit 5-6 cifres of the number and the pda will search all the contacts that contains the 5-6 cifres sequence.
televisi said:
Hi
I tried to search in magician forum about this, but it seems not find any similar to this
Have you ever have a feeling to find name by phone number? as for instance I got miss call from 123 111 number but does not show any name in my missed call list
so I open up contacts, but unfortunately, it only allows me to search by name not by phone number...
any idea how to do this?
THanks so much
Click to expand...
Click to collapse
Try the Standard Search option and you can find the contacts by numbers. Cheers
Hm... found anomaly here:
For some reason I tried the Smart Dial skizz0 mentioned, but for some reason it does not show the contact details when I type them, but when dial them it shows correctly
Eg:
what shown in contact:
Home
(61) 3 1234-5678
so I try smart type in smart dial:
12345678
during smart dial typing, no result shown
BUT
when I dial them, after a while it shows "HOME"
Weird isn't it...
for my opinion this "hyphen" method in contact get upside and downside:
upside ==> we can read it easily
downside ==> for some reason the program confused to recognise them...
Hi there, I'm wondering if anyone else might be having a similar problem with 'caller [or texter] ID'.
Most networks, as I understand it, use the international dialing code when sending out texts and calls, meaning this is usually the incoming number when you recieve a text or call.
I've obviously got people programmed into my contacts who text me but when they do, I don't get their name, I get their number - with the dialling code eg. +447750500500. When I tap to go into the threaded mode, I'll get all previous contact with this person but with them identified only as the number. However if I head to the People tab, then again to see the messages I've sent/recieved with that person, I get the same messages only under the banner of their name and not the number.
I believe calls work fine with the code programmed in on their contact profile.
Anyone know why this is being caused?
I have the same problem. Both calls and text messages.
I don't think it matters if the international code is there or not.
Really frustrating not knowing who calls.
I've had this problem first time the device was initialized (right after opening the box). It might be caused by the fact I didn't have any SIM in it at that time, I'm not sure.
After a hard reset with a SIM inserted, everything started working as it's supposed to.
Hmm, I've changed the SIM, but I can't remember if it worked wih the first SIM card.
But a hard reset deletes everything, right?
There are a few things you have to be sure of:
Do not have double contacts, if you have a number (with and without operator/country prefix) twice in your list it will not show any name.
I don't know if this applies if you have a contact on your phone memory and on your sim card. I am sure it does have this problem if you have two contacts with the same number on the memory phone.
For some reason this is logic: On an incoming call, the phones checks it's phonebook and retrieves two numbers and then it does not know what to display, is it contact one, or two?
I hope this helps you out. I did not experience any problems (yet).
AndrewCZ said:
I've had this problem first time the device was initialized (right after opening the box). It might be caused by the fact I didn't have any SIM in it at that time, I'm not sure.
After a hard reset with a SIM inserted, everything started working as it's supposed to.
Click to expand...
Click to collapse
Try this....
1. Edit one "test number" in your contacts and remove international codes.
Just put that "test" tel number. without int. codes... And make sure that number is not stored nder another contact. (No duplicates.)
2. Then dial from that number and see if that tel# is identified. If you have just "0xx-123456" then go to #3.
3. Go to registry and change of the Caller ID match rule. (Minus one digit.)
Example: Caller ID rule:8 (Change from 8 to 7 or 6 to 5 .. trailing digits for Call ID match. )
* HKCU\Control Panel\Phone\CalIidMatch value:7
4. Restart and test again...
5. If its OK, than test with SMS.
6. If its OK again , put back your international codes and test again.
7. If not go to no.3
Hope this helps.
KraFT
samluke said:
Hi there, I'm wondering if anyone else might be having a similar problem with 'caller [or texter] ID'.
Most networks, as I understand it, use the international dialing code when sending out texts and calls, meaning this is usually the incoming number when you recieve a text or call.
I've obviously got people programmed into my contacts who text me but when they do, I don't get their name, I get their number - with the dialling code eg. +447750500500. When I tap to go into the threaded mode, I'll get all previous contact with this person but with them identified only as the number. However if I head to the People tab, then again to see the messages I've sent/recieved with that person, I get the same messages only under the banner of their name and not the number.
I believe calls work fine with the code programmed in on their contact profile.
Anyone know why this is being caused?
Click to expand...
Click to collapse
Hi guys!! i had this problem too but i have fix the problem. what i do:
!) i store all my contacts in my sim card and delete the contacts in the phone.
2)do a hard reset
3)upon doing the hard reset, the phone will prompt you on importing sim contacts and finding your service provider. select both and and press ok
4)now try to call from your house to your phone to do a check.
5)my problem was solved after this
hope it helps!
KraFT_mk said:
Try this....
1. Edit one "test number" in your contacts and remove international codes.
Just put that "test" tel number. without int. codes... And make sure that number is not stored nder another contact. (No duplicates.)
2. Then dial from that number and see if that tel# is identified. If you have just "0xx-123456" then go to #3.
3. Go to registry and change of the Caller ID match rule. (Minus one digit.)
Example: Caller ID rule:8 (Change from 8 to 7 or 6 to 5 .. trailing digits for Call ID match. )
* HKCU\Control Panel\Phone\CalIidMatch value:7
4. Restart and test again...
5. If its OK, than test with SMS.
6. If its OK again , put back your international codes and test again.
7. If not go to no.3
Hope this helps.
KraFT
Click to expand...
Click to collapse
What was happening to me before the reset was a bit different - the phone wasn't able to match anything at all - even a number called from the phonebook and stored in "recent calls" in EXACTLY the same way it's in contact, didn't match to the contact when redialed.
I think that something required for Caller ID to work gets done when the phone is first initialized, and that this step requires full access to the phone module (which the phone doesn't have without a SIM inserted and a proper PIN entered).
hi,
i encountered also that worry,
i set the HKCU\Control Panel\Phone\CalIidMatch value:9
my mobile phone number to test was stored as "06xxyyzzww"
and when i phone my diamond2 from that number
the caller id is recognized
(with showing as +336wwxxyyzz)
i tested from my home phone stored in contacts as 04wwxxyyzz
i rang my topaz its was identfied as my home,
(with showing as +334wwxxyyzz)
i am in france, + is for 00 ,our phone numbers are 10 digits long
(mobiles and "home") ,
to be joined from abroad, you have to dial +33+phone number WITHOUT the first digit "0")
so the "9" value i put in the registry
if it could help you
regards
Hi,
just stumbled over the same problem.
The old phone (HTC P330) resolved numbers from my used format 01234-56789.
Since my contacts are a mess, I have 01234-12345, +49-123456-456, +49 (0123)-456 and so on, it would be a great pain in my ass to switch every contact to +49123-456 (which the new phone resolved).
I compared the Registry-Entry from the P3300 with the TD2 and voila: TD2 was 12, P3300 had the value 8.
I changed the TD2 to value 8, reboot and now I'm happy again, the phone is getting used to my contact list
Regards
Heiko
Hi,
I'm experiencing the exactly same problem, that incomming calls or messages isn't shown by name, but only by number.
I'm all new to Windows mobile, but I tried downloading a regeditor, and experimented with different values in the CallIdMatch string. However, no succes.
I live in Denmark, where numbers look like +4512345678, where +45 is the international code. Can someone please tell me, what should be the correct value? The original values was 8.
I have further found that some contacts are recognized. What the difference is between the groups, are however unclear!
Caller ID problem, my solution
I had the same problem. But after a hard reset it seems to work just fine now. Remember to backup your downloaded programs etc before doing this.
Tyven said:
Hi,
I'm experiencing the exactly same problem, that incomming calls or messages isn't shown by name, but only by number.
I'm all new to Windows mobile, but I tried downloading a regeditor, and experimented with different values in the CallIdMatch string. However, no succes.
I live in Denmark, where numbers look like +4512345678, where +45 is the international code. Can someone please tell me, what should be the correct value? The original values was 8.
I have further found that some contacts are recognized. What the difference is between the groups, are however unclear!
Click to expand...
Click to collapse
Hi,
"8" should be the good figure for you, as in France
we have phone numbers +33987654321
and "9" is the good value for me, in:
HKCU\Control Panel\Phone\CalIidMatch value:
Edit: i remove previous "edit"
in fact all my contacts had been erased" so it was normal to have no caller ID?
ps: is your carrier sendind all the figures when you're receiving calls, i mean +4512345678
so perhaps you're encountering a bug .
you should try to backup your device, with a soft like spritebackup(special price for htc owners on their webpage) and experiment an hardreset
and restore
regards
Hi ,
did you ever try to change the following:
RegistryEdit and Decreasing the CallIDMatch from 12 to 7 solved my Issue
See below
HKEY_CURRENT_USER\ControlPanel\Phone" name="CallIDMatch"
Greetings from Slovenia
Hello,
that is my first post so please do not be very critical to my english level and PPC skills .
now this is an old thread but for BULGARIA the correct registry value is "9". Here the mobil numbers are as follows "08xx 123456" (9 digits without the ZERO at the very beginning). that is why the usefull number is that (default for my TD2 was 8). Now after this fix the phone can correctly identify which number i want to dial when i am inserting it by digits, instead of selecting the exact person. i do not know am i explaining correctly but i will try to put some more detail on that. When i want to dial some particular number (for example "08xx 123456") the phone select me the correct contact no matter how i put this contact in memory. with "+3598xx 123456" or only with "08xx 123456". before that intervention the phone identifies me the correct contact only if i type the digits, exactly the same way that i have added it to the memory. So i think that this registry key does not have a universal resolution. the resolution depends on how many digits is using tha particular mobile operator.
i hope that will be helpful for someone who is happy to own an HTC and is happy with it ... like Me
salut!
suppose i have a friend with two cellular phones, with two mobile numbers accordingly.
therefore i use "cellular" and "car" slots to write them both to my lookout contacts.
one day my friend has obviously one phone switched off, so i must send sms to another number, specified as "car".
how can i send sms to second mobile number?
i tried every slot: fax, car, work, home - none of them are supposed by HTC to be used for sms addressing
exec228 said:
salut!
suppose i have a friend with two cellular phones, with two mobile numbers accordingly.
therefore i use "cellular" and "car" slots to write them both to my lookout contacts.
one day my friend has obviously one phone switched off, so i must send sms to another number, specified as "car".
how can i send sms to second mobile number?
i tried every slot: fax, car, work, home - none of them are supposed by HTC to be used for sms addressing
Click to expand...
Click to collapse
I looked at this on my phone if I start a new sms
I select the to
this will pop the address book up when i select the name it shows all numbers available
I can select any number
What steps are you trying
1)press "pick up phone" hardbutton by finger
2)press sequence of letters on the screen buttons until contact is found
3)press "menu" on the screen
4)select "send text message" item
htc opens an sms screen with cell-number already inserted
so it looks like i must add a recipient (same person with other number) and erase first one?
damn htc and md...
anyways, thank you. that solves the problem however.
though it looks like gates either hates mobile users, or doesn't have any idea how to use phones.
thank you very much!
your welcome.......it is a little inconvenient lucky most people only have one Mobile LOL
I have twice now gone through my contacts and set Mobile first, Home second, etc for several contacts. After my newest ROM flash, the order is all messed up again, even on the Google Contacts side of things.
Is there some feature I'm missing? Am I the only one that wants a predictable listing of phone numbers on my phone?
anyone? 10char
Someone must know...
I get very anoyed by the contact's numbers order.
In my country:
- the mobile numbers begin with 06...
- fixed line numbers depends of the town, but mostly are 011..., 021..., etc.
Now - it realy is a pain in the back to search for a person, and 99% of the time to scroll down to 2cond or third number to pick...
Even when I want to send a message - the same is needed, although in my country it is not possible to send a message to a fixed line number (I know in some countries it is possible).
Is there an app to choose the order of offered numbers to dial, send messages and similar?
Cheers
I found on another forum:
"If you do a long press on the office number, a menu will appear. From the menu, you can select "Make default number". This way, when you dial, it will automatically dial the office number."
But :
- it doesn't appy to message compose,
- it can be applyed to one number only - if someone have 2 mobile phones (personal and work) - it helps just 50%
- it has to be done person by person, and it is a pain...
- it doesn't apply to all the dialers (just to default one)
Can someone clarify if WM7 will show both the full name and company for incoming calls.
I save all my contacts in outlook and use the File As to show both Person & Company i.e. John Smith(ABC Ltd).
I have over 1500 contacts for work and it's one of the features that has kept me with Windows for years.
I've tried Android and that doesn't do it. Iphone doesn't do it. Nokia doesn't do it - Not sure about Blackberry.
Also does WM7 have smart dial - I'm sure I read that it didn't, again it's a feature that's kept me with Windows, I have a shocking memory and being able to dial by first name, last name, company or telephone number is invaluble.
Cheers
Pete
For me it shows only 1st and last name + picture if available. Company info is a no go as long as you don't incorporate it in the contact name itself as I usually do.
Smartdial: No. But searching the contact list is easy. Just type 2-3 letters and you have narrowed the results enough. I'm saying this with 700+ contacts.
...I very much like to use voice dial, too. Very reliable, in fact, and fast.
TheOnly1 said:
For me it shows only 1st and last name + picture if available. Company info is a no go as long as you don't incorporate it in the contact name itself as I usually do.
Smartdial: No. But searching the contact list is easy. Just type 2-3 letters and you have narrowed the results enough. I'm saying this with 700+ contacts.
Click to expand...
Click to collapse
That's really dissapointing - as a business tool I find it so very useful.
I guess I'll have to stick with 6.5 until something else similar comes along.
how did get a picture too show i have wm7 on my phone sine dec, and all show is first and last name with number. is there something need too do too get a picture to show thanks
Dear All,
I'm experiencing very strange issue with my WP7 HTC HD2, when receiving call form my saved contacts.
Almost all my contacts are saved in my phone with international dialing code as I'm living abroad.
When I receive call abroad, the name of my contact is displayed.
When I receive call at home the name is not displayed, only the number is displayed and I dont know who is calling while the number is saved in my phone with international dialing code.
To have the name displayed I have to save the number again without international dialing code.
I have the same issue when I dialing also.
Please help.
My_HTC_HD2 said:
Dear All,
I'm experiencing very strange issue with my WP7 HTC HD2, when receiving call form my saved contacts.
Almost all my contacts are saved in my phone with international dialing code as I'm living abroad.
When I receive call abroad, the name of my contact is displayed.
When I receive call at home the name is not displayed, only the number is displayed and I dont know who is calling while the number is saved in my phone with international dialing code.
To have the name displayed I have to save the number again without international dialing code.
I have the same issue when I dialing also.
Please help.
Click to expand...
Click to collapse
Apply the following registry and it will solve your problem:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallIDMatch"=dword:7
petrosk73 said:
Apply the following registry and it will solve your problem:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallIDMatch"=dword:7
Click to expand...
Click to collapse
Thanks sir for your help,
but unfortunately I cannot find CallIDMatch in the path you sent.
even when I searching I cant find it.
I'm using RegistryEditor1.4 from Mosko mobi
My_HTC_HD2 said:
Thanks sir for your help,
but unfortunately I cannot find CallIDMatch in the path you sent.
even when I searching I cant find it.
I'm using RegistryEditor1.4 from Mosko mobi
Click to expand...
Click to collapse
Try with the method described here: http://forum.xda-developers.com/showthread.php?t=907169
It works perfectly!