Related
Very often I have to write an SMS with one hand, but it is impossible with Qtek 2020.
I would like to find a software where you can write an SMS with the standard mode (like on normal GSM) with standard numbers 1-9 with letters on them.
I use D9 to find the contact and I think it is very usefull.
When you find a contact and you tap the SMS button near the number it should be very appriciated to have a standard GSM input letter mode (like T9) instead of default SMS client of WM.
Do someone know if a software like this exists?
Thanks for the answer,
Urosh
GO to www.yorch.net and look under "software".
I' don't find any software I described before.
Please let me know which one do you think do what I said.
Thanks,
Urosh
I apologise, I thought it was on yorches site, here is the link for you, it is a superb piece of software and it is FREE. Anybody else wants a brilliant sms program make sure you get it too.
http://www.handango.com/PlatformSea...siteId=1&txtSearch=designlab&zsortParams=true
I just found a bug in this program when running on xda2, if you push "select" button when entering phone number it gives an error, but ig you spend a little time inserting all your often used numbers you can use the drop down becuase it remebers the last 20 numbers that you have used, its worth a little time to set it up becuase it saves a lot of time in the long run.
Actually it's not working at all with my mda ii It says: message sent successfully, but later on-message not delivered Do you have any idea what I could be doing wrong? Is there a special format in which I have to put the number of receipient?
i think, only way is spb fullscreen keyboard or typeango ..
It's working fine on my XDA-II with T-Mobile ROM 1.60. The only thing is that if I am trying to send to local mobile number I have to enter the number with '+', country code etc. while I could use 'short' number with ordinary mobile phone.
Zeljac said:
Actually it's not working at all with my mda ii It says: message sent successfully, but later on-message not delivered Do you have any idea what I could be doing wrong? Is there a special format in which I have to put the number of receipient?
Click to expand...
Click to collapse
Ok, that seemed to do the trick. Tnx a lot, it's working now flawlessly. But, I still have another question -how do you input "+" directly from the SMSwriter. "+" is on the same key as the "0" and whatever I do I keep getting "0". Of coarse, I could call up the keyboard but for that would again need a stlyus
Its a serious shortcoming, its a pity somebody couldnt patch on the ability to select searchwhich would bring up the contacts list, any offers from you programmers please???
unfortunately, found no way around it, I used to enter '+' with soft keyboard using a pen. The only temporary solution which comes to my mind is the list of numbers used to send SMS already (there should be some 25 numbers kept).
Zeljac said:
Ok, that seemed to do the trick. Tnx a lot, it's working now flawlessly. But, I still have another question -how do you input "+" directly from the SMSwriter. "+" is on the same key as the "0" and whatever I do I keep getting "0". Of coarse, I could call up the keyboard but for that would again need a stlyus
Click to expand...
Click to collapse
For me is impossible to use this software only with my fingers.
It has too small dialogue boxes (to find the contact).
For me the best solution would be to have a D9 program that integrates a SMS client which has the same keypad which is at the start of the program (with big buttons) to write to message (when the contact has just been selected).
Bye,
Urosh
i buy HTC TOUCH HD and i snyc contacts with outlook but in my phone they are sort by last name i use address book by first name in nokia and i want to have it here how to sort contacts by first name
please help
why this phone need so much time to recive call
first screen is on, then after the sec vibrate is on, then after that ringtone, and when i scroll to answer almost second after i can hear other party
Shubaroo contact changer. Haven't tested myself on Touch HD, but worked well with my previous WM6 device.
http://www.shubaroo.com/index.php?module=contact
Download 'HD tweak' to tweak the registry settings for shorter delay before phone rings etc.
pasko1234 said:
i buy HTC TOUCH HD and i snyc contacts with outlook but in my phone they are sort by last name i use address book by first name in nokia and i want to have it here how to sort contacts by first name
please help
why this phone need so much time to recive call
first screen is on, then after the sec vibrate is on, then after that ringtone, and when i scroll to answer almost second after i can hear other party
Click to expand...
Click to collapse
to sort using "firstname, last name" FOR ALL CONTACTS you would need to do so in Desktop's Outlook. i dont' think mobile outlook (aka contacts) have this option, unless you want to do ONE BY ONE. I haven't tried this, because I always use "last name, first name"
as for the delay in answering call, the previous poster is right, install HD Tweak, and you can modify the delay in answer calls. it works quite well. also the slider to answer/ignore the call is a little buggy, it lags when you try to slide while the phone is ringing. i would suggest S2U2's slider, it is very lean and fast.
This how you do it to be First Last name however it is quite boring because you have to do it to each entry in your contacts list on your HD.
1- On your touchFlo3D People tab select “All People”
2- The first contact well be highlighted in green hit “Menu” then “Edit”
3- Change the “File as” entry to be First Last name.
Now the contact item will be stored and listed as First Last name.
You can see why I said it is boring because you have to do it for your contacts one by one.
I hope this is what you wanted
amuneer said:
Shubaroo contact changer. Haven't tested myself on Touch HD, but worked well with my previous WM6 device.
http://www.shubaroo.com/index.php?module=contact
Download 'HD tweak' to tweak the registry settings for shorter delay before phone rings etc.
Click to expand...
Click to collapse
I tried the contact changer, it doesn't work on blackstone....
I have a question...how can i add contacst from my pc,originally from nokia the are all .vcf and i dont know how to put it on my blackstone..please can u help me? thanks a lot
its so hard to answer me???
homola said:
its so hard to answer me???
Click to expand...
Click to collapse
the answer was written in previous posts.
outlook can do that
Hi - I've only had the HD a few weeks and of all the things I've seen on this forum, the only really niggling thing I've found with the standard install on my HD is the contacts issue mentioned in this thread. I'm sync-ing all my calendar, mail and contacts with Lotus Notes (using Lotus Notes Traveller). In Lotus Notes I have got all the contacts entered with their first names and last names, but then in the options I have selected "firstname lastname" as the view style. I am amazed that Windows mobile doesn't have this option?
If I WERE to go through every single contact entry and change the "file as" to the right format, would this synchronise back to Lotus Notes and cause any problems? Or is it just a setting on the device itself? Is there no global device setting to change the view style?
homola said:
its so hard to answer me???
Click to expand...
Click to collapse
I made a post about this yesterday.
I have the same frustration and created my own program to fix the contacts, even allowing for your own custom formats and using the Company Name field. I hope you find it helpful!
http://wargolet.com/wm6/
Sorry but I searched and cannot find answers-
A few questions:
I have tmobile in the usa (oregon) with a black sony x1i
1) Issue- I am coming from a Sam BJ2- I use exch server for email, contacts, etc. When I set up my X1 with my exchange info- everything worked nicely-
But some of my contacts that are smsing me do not show their contact name only the #. I think it might be cause some have the 1 (XXX) and some dont have the 1. How can I fix this as I have 600 contacts?? Please help
I noticed that the phone wont dial a # without the 1 in front of it-
2) on my BJ2 - when I wanted to call, email or text someone- I would start typing their name and I would choose from the list as I am typing. I cant do that with the xperia- typing doesnt do anything- How do people quickly search for a contact???
3) Is there a seperate box that shows on the home screen when SMS's come in as opposed to 1 message box with a red #? I would like to see if its an email or sms.
Thx in advance
In regards to 1, have you tried selecting "United States" in the regional settings?
Yes I set it to USA english-
Also where is the battery indicator on the home screen??
Thx
1) thats a calling ID setting... there is nothing you can do about it except you go change the contact number and add or remove the 1 before the area code... the phone is just trying to match whatever the caller ID is to your contact list... if it is not the same it wont display it.... I have had that problem on my BJ2 too and I had to change all those contacts as well
2) I can do so by sliding out the keyboard and start typing the name and call... not sure if you are doing the samething or you are trying to get the soft keyboard out to type...
3) I have a sms or email notification showing up on the bottom of the screen whenever I receive them.... otherwise the sonyericsson panel have a option to display them I think
Guys,
I've posted this before but nobody has helped me yet.
Basically put I have a couple of contacts for which I have more than one contact number (home, Mobile etc..)
Anyway, when i receive a call from one of these contacts, the name is not resolved, the picture is not shown and the custom ringtone I have chosen (all by vanilla stock rom means) does not ring!!
I have seen this happen with "Exact" matches to contacts in my Contacts list and also if I have entered the number as "+447760....." instead of using the default "07760...." prefix for UK mobile numbers (as I'm abroad a lot so need to use that to dial them) it also refuses to recognise that they are in fact the same number - something my Artemis did without an issue.
Please help me resolve this - it's ruining my HD experience!
Thanks
21 views and no replies - come on guys please - going on a trip tomorrow and I need this to be sorted if poss - doing my head in!!
I had exactly the same problem on my X1, which I have now sold so I could get a HD. I was on o2 uk using itje's 5.061 rom. What network are you on and which rom and what software have you installed? maybe something we both installed is causing the problem
Right, I'm on a stock rom on an unbranded Touch HHD on the Vodafone network. Programs I've installed are as follows:
Changscreen,
HDTweak
Advanced Config
S K Tools
Battlog
Fingerkeyboard
Resco file Explorer
Very strange - it might have happened since I restored a backup but I doubt it.
Try reducing Phone>Call ID match number in Advanced Config.
I have similar problem... Just installed dutty 3.0X and when i sinchronized all my contacts become duplicated, so i deleted manual only the first ones. And now when someone from the contacts is ringing i dont get picture or his name and I am sure that i have the same number in the contact list. Odd
Anyone have any other ideas about this? Still causing me some considerable pain - I seem to recall it started after I started to reconcile the outlook contacts with my PC - this may have caused a different contact ID (or something?)
same problem and no solutoin... :-(
i managed to fix this by reassigning the phone numbers to the contacts page. It seems to occur when you use 3rd party contact management apps before you have assigned numbers.
Works fine now
mslookout inserts spaces into phone number, and prolly phone cannot recognise incoming number having spaces in phonebook?
I also cant fix it by changing CallIDMatch in the registry. It's bizarre as I have 2 contacts in my favourites: both are now set to No's starting with '0' yet when one texts me, their name shows and when the other does, their number shows. hard and soft resets have also failed to resolve this, HTC helpdesk no use at all, also logged with Windows helpdesk in case it is a microsoft, not htc, problem.
Am keen for other things to try, open to suggestions....
Am disappinted and amazed that what is otherwise a great phone, can't do what cheap cr*ppy phones, can , ie show the name of the person calling or texting.
Have you tried using Advanced Config and increasing Call ID match to 9 or 10?
No caller name when receiving Incoming Call
This may be an old thread, but sometimes the newer ROMs also have the same problem.
This happened to me after updating my from from WM 6.1 to WEH 6.5.3. So, I am updating this thread on how I resolved my problem.
Step 1. Edit the Registry and change the CallIDMatch value to 7 (the original value was 10).
Code:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallIDMatch"=dword:00000007
Step 2. Soft Reset (power off and restart)
Before I did this, I needed to copy my contacts from SIM to the Outlook Contacts list, so in my Contacts list, I have "double view" of both lists on the same screen - frustrating.
After this change of the Registry key value, I erased all my contacts from the Outlook Contacts list (use the Hide Sim Contacts function) because I prefer to have my default contacts to be from the SIM card instead of the Outlook Contacts. This way, I can be assured that all newer contacts will be stored on the SIM card and I do not have to worry about losing contacts if I change phones.
Hi everyone,
if I search for a name via the dial numbers in the phone dialog (after pressing green dial button) it works fine to dial the numbers of the persons I found. But if I press the left or right key to switch between home or phone number, mail or sms, I'm not able to create SMS or mails out of this window. On my old htc artemis with wm6 but without touchFlo it worked fine and it is much more useful than going to contacts overview because of the easy searching.
Hope you understand what I try to say
Thanks for any help, Tobi
You are right. However, once name is selected (with <m>) you can tap "Menu" - "Send Text Message" to send SMS.
Hi,
You can search your contact on the sms or email screen. At the line of the phone number, you write the first words of your contact and you have the list of your repertory.
You have only to choose at which of them you want to send an sms. I think it's easiest like this !
Thanks for both of the answers
@azahidi: I found this out yesterday, you're right thats an option, but not an advance I think, menu is too inconvenient for finger control. the greatest problem is, that if I select a contact with my finger, the phone directly calls it insteat of just selecting it and giving me further options.
@pinou13: that's great, I didn't know this yet, I think that solves my problem in a way
But nevertheless, it would be great, if one could set that if I click on the contact in the dial window, instead of directly dealing the number, showing the same overview (call cell phone, call home, write mail, write sms) from the contacts window.
If someone know a solution to do so, please post it, but so far it's an alternative to do it via sms or mail menu.
Thanks, Tobi
You can solve your problem with the Spb Mobile Shell. It is very finger-friendly to use, I am happy with it, but it has to be paid after 14 days free trial. For details: http://www.spbsoftwarehouse.com/pocketpc-software/mobileshell/
Hm, looks great, but that's around 10% of the phones costs. I prefer to use freeware and I rather like touchFlo, but not in that one little thing