I've searched everywhere, and cannot find any patch or how-to on this topic.
I really can't stand XT9/T9 input, but each time i set it to ABC, it's back to XT9 the next time I replay on a sms. some places XT9 is disabled, but i want it completely disabled.
Anyone who can help me here?
I've tried browsing trough all settings, but cannot find anything about disabling xt9
Press the gear-button on the keyboard>Text input>uncheck Prediction. Done.
orgasmatrond said:
Press the gear-button on the keyboard>Text input>uncheck Prediction. Done.
Click to expand...
Click to collapse
And how do i disable that irritating xt9 permanently on my HTC s740?
Related
How to disable T9?
There's no Croatian T9 dictionary so it is really annoying to have T9 turned on.
Or maybe if there is Croatian dictionary somebody could post it or link to it?
I searched thru general forums but anything I found there doesn't work.
Thank you very much.
well on my keyboard is on the top right a shifting-button named "ABC/T9"
Just switch it to the ABC and T9 is disabled.
Or do you mean in general?
I mean general.
When my keyboard pops up T9 is usulally on. And I usually forget that and start writing. Then I have to delete what I wrote and turn off T9 with that bottun.
And every time keyboard pops out T9 is on again (except when writing contacts and maybe some other times).
It is pretty annoying.
So, I would like to disable T9 complitely. (or to get Croatian dictionary)
At \\registry\HKLM\Software\Tegic\eT9\
Set parametre XT9SupportMSSip to 0.
BigKvak said:
At \\registry\HKLM\Software\Tegic\eT9\
Set parametre XT9SupportMSSip to 0.
Click to expand...
Click to collapse
Just did this, soft reseted and started writing new SMS.
And T9 was on
Any other ideas?
Try Shcaps Advanced Config (the black banner will still stay for listing sms recipients suggesting only one recipient - unconvenient)
or
download and install the cab from post #6 in the following thread http://forum.xda-developers.com/showthread.php?t=357744
tica011 said:
Try Shcaps Advanced Config (the black banner will still stay for listing sms recipients suggesting only one recipient - unconvenient)
or
download and install the cab from post #6 in the following thread http://forum.xda-developers.com/showthread.php?t=357744
Click to expand...
Click to collapse
I installed this cab and I could only write numbers. there were no letters at all.
Then I installed Schaps Advanced Config but I couldnt find where to turn T9 off
But then I installed cab from post 11 from upper post. And it seems T9 is no more default input metod. I can turn it on but it isn't on by default.
I have to test it more but it seems it works.
P.S. I use default touch keyboard and I did all testings with it.
Thank you all for help
mane this is a good post, cause i was thinking like all day is their a way to turn it off, this whole time its been on the keyboard, ey thanks yall =)
kulen said:
How to disable T9?
There's no Croatian T9 dictionary so it is really annoying to have T9 turned on.
Or maybe if there is Croatian dictionary somebody could post it or link to it?
I searched thru general forums but anything I found there doesn't work.
Thank you very much.
Click to expand...
Click to collapse
HKLM\SOFTWARE\Tegic\eT9\IME
CarrierDefaultTextMode ="0"
I have a question.
I use Resco keyboard right now and put every T9 option off.
I just want to type without some autocorrection etc etc.
But I still get a black area above the keyboard when typing.
Tried every option, but can't get it away.
Any of you wizards know the solution?
Thanks.
PS: Searched the forum, but couldn't find an answer, attached a screenshot
Check out FingerKeyboard2 thread.
Even if you don't like the keyboard itself, among the attached files you can find global T9 disable patch. Maybe that would solve your problem.
Rozenthal said:
Check out FingerKeyboard2 thread.
Even if you don't like the keyboard itself, among the attached files you can find global T9 disable patch. Maybe that would solve your problem.
Click to expand...
Click to collapse
Thanks mate, the T9 disable patch worked!
why pay or resco when you have fingerkeyboard?
When I use HW keyboard it always has ABC mode on. I have to use FN key and T9 key to choose T9 manually.
How can I enable T9 to be automatically ON when I use HW keyboard?
Thank you for your help
the t9 always works with a onscreen keyboard. Also if you manage it with a hack a problem would be to where the word suggestions should pop up on the screen.
when someone write a programme for your suggestion than it would be a custom keyboard without letters, only word suggestions and pops automaticly up when the keyboard on the pro is used.
Maybe someone already wrote it.
It would be nice trough
Search for the cab god damn it! There is a cab in one of the ezinput keyboard threads in dev & hacking that allows T9 to always be on (Yes, including the HW keyboard).
Kraize said:
Search for the cab god damn it! There is a cab in one of the ezinput keyboard threads in dev & hacking that allows T9 to always be on (Yes, including the HW keyboard).
Click to expand...
Click to collapse
You don't happen to have a link to this cab at hand, do you? I for one would like to have the T9 always on (even with the hw keyboard), but did not manage to find the correct thread / cab even after an extensive search.
I searched with no result, unfortunately. If you could be so kind to address me to that cab, I would be very grateful indeed.
ninja.rogue said:
I searched with no result, unfortunately. If you could be so kind to address me to that cab, I would be very grateful indeed.
Click to expand...
Click to collapse
Oh that was so hard I almost had to use my brain
First result when searching on ezinput T9 always enable came up trumps...
DeadKeys / T9 as default behaviour for the Fn+Space combo - Full HW Keyboard phones
I thank you very much. Even if I walk around here for years, sometimes it happens that I am not able to find out things. Fortunately there are others who help
You're very welcome, glad to help.
Thanks for pointing out about the keyboard, did you test it and it works?
why not FN + Space It´s working at my device
Because I would like that when I slide out the keyboard I can immediately type with T9 on, without switching it on manually - this is the meaning of "automatically ON"
okaaaay. sry for that, but just tell me the sense of T9 with a "complete" keyboard!?? Do you also have T9 at your computer at home?
comingloud said:
okaaaay. sry for that, but just tell me the sense of T9 with a "complete" keyboard!?? Do you also have T9 at your computer at home?
Click to expand...
Click to collapse
I see a couple of ways T9 is useful with the full keyboard.
1. Words like "won't" can be typed out with w-o-n-t rather than w-o-n-FN-'-t
2. It helps with long words. We can use the arrow keys to choose the word after a couple of letters rather than typing out the rest of the word.
There's a fundamental difference between the keyboard on a mobile device like the Rhodium and your desktop keyboard. On our Rhodium, we have only our 2 thumbs. On a full size desktop/notebook, we make use of all 10 of our fingers.
It seems that we are concentrating on why I have asked to have T9 ON, while I was asking HOW to have it on.
If you don't agree that it is a good thing that somebody finds out how to, simply don't post here
I never used T9 but it supposed to offer words from vocabulary? in my case it doesn't...
well, has someone found a way to make this work on landscape or hardware keyboard ??
having to always activa xt9 is boring ..
(that cab does not work) looking at the registry is changes from 1 to 0 when changing to landscape and it's the htc keyboard doing this. If you activate xt9 and change to the default windows keyboard it works but then you have a small keyboard when on portait.
I agree, the same thing happens to me. The easiest solution is to have it rotate to portrait, pull up the XT9 keyboard and then open the screen.
It's a pain, though. Would love another solution.
Dead key
None of CABs which can be found here are not working the way that if I will press Fn+Sym it acts as deadkey - always T9 dialog is shown. Have anybody idea how to change it?
I've disable this XT9 over Settings, but sometimes its appeared again.
What need to edit in registry for FULL disable of this useful XT9?
.
I need to disable it too!
Nobody has a solution for this yet? Can someone please share how to permanently disable XT9 on HD2
I second that!
Have you tried Settings-----> Locale and Text----->XT9 settings?
If so, you might be turning it back on whilst typing.
Hello
Dont know if im the only person but do other people find the button on the keyboard to change betwee XT9 and ABC and the "minimize keyboard" buttons annoying as when you type it always darn changes or gets activated.
Does anyone know of a fix's for this, or any chance of someone making one for me as I would be extremly greatfull??
Regards
Damian
02coled said:
Hello
Dont know if im the only person but do other people find the button on the keyboard to change betwee XT9 and ABC and the "minimize keyboard" buttons annoying as when you type it always darn changes or gets activated.
Does anyone know of a fix's for this, or any chance of someone making one for me as I would be extremly greatfull??
Regards
Damian
Click to expand...
Click to collapse
Have you considered an alternative keyboard? Fingerkeyboard, for example, is very popular. This link is to the last release, which is obsolete, but it has some images on it, and a link to the latest version...
http://forum.xda-developers.com/showthread.php?t=487677
I personally like the default keyboard, but that one's not much different, but with extras
Hope this helps
I second that.
I like the original keyboard a lot, but the XT9 is kind of useless for Brazilian Portuguese.
If there is any way to definetly disable it, to prevent the annoyance of accidentaly turn it on, I also want to know...
Third that... really2 need a program to disable the T9...
love the original keyboard.. but the T9 button is bugging me..