hi does anyone know how to remove xt9 im running on touch-it v4.4 and so far its awesome except the xt9 =P
Hey I got two things you can try...
Alt+Space lets you switch to ABC mode on a per application basis that may work for you or if that doesnt and you wanna get rid of it completely...
To Disable XT9 change the following registry key to:
HKLM\SOFTWARE\Tegic\eT9\IME\KbdDlls\000109FF=kdbhi d.dll
(BUT IT WILL KILL YOUR CAPS KEY!!)
How to disable T9?
There's no Croatian T9 dictionary so it is really annoying to have T9 turned on.
Or maybe if there is Croatian dictionary somebody could post it or link to it?
I searched thru general forums but anything I found there doesn't work.
Thank you very much.
well on my keyboard is on the top right a shifting-button named "ABC/T9"
Just switch it to the ABC and T9 is disabled.
Or do you mean in general?
I mean general.
When my keyboard pops up T9 is usulally on. And I usually forget that and start writing. Then I have to delete what I wrote and turn off T9 with that bottun.
And every time keyboard pops out T9 is on again (except when writing contacts and maybe some other times).
It is pretty annoying.
So, I would like to disable T9 complitely. (or to get Croatian dictionary)
At \\registry\HKLM\Software\Tegic\eT9\
Set parametre XT9SupportMSSip to 0.
BigKvak said:
At \\registry\HKLM\Software\Tegic\eT9\
Set parametre XT9SupportMSSip to 0.
Click to expand...
Click to collapse
Just did this, soft reseted and started writing new SMS.
And T9 was on
Any other ideas?
Try Shcaps Advanced Config (the black banner will still stay for listing sms recipients suggesting only one recipient - unconvenient)
or
download and install the cab from post #6 in the following thread http://forum.xda-developers.com/showthread.php?t=357744
tica011 said:
Try Shcaps Advanced Config (the black banner will still stay for listing sms recipients suggesting only one recipient - unconvenient)
or
download and install the cab from post #6 in the following thread http://forum.xda-developers.com/showthread.php?t=357744
Click to expand...
Click to collapse
I installed this cab and I could only write numbers. there were no letters at all.
Then I installed Schaps Advanced Config but I couldnt find where to turn T9 off
But then I installed cab from post 11 from upper post. And it seems T9 is no more default input metod. I can turn it on but it isn't on by default.
I have to test it more but it seems it works.
P.S. I use default touch keyboard and I did all testings with it.
Thank you all for help
mane this is a good post, cause i was thinking like all day is their a way to turn it off, this whole time its been on the keyboard, ey thanks yall =)
kulen said:
How to disable T9?
There's no Croatian T9 dictionary so it is really annoying to have T9 turned on.
Or maybe if there is Croatian dictionary somebody could post it or link to it?
I searched thru general forums but anything I found there doesn't work.
Thank you very much.
Click to expand...
Click to collapse
HKLM\SOFTWARE\Tegic\eT9\IME
CarrierDefaultTextMode ="0"
I've installed Swype and really like it. I'm using SIPchange to enable it as a default. Unfortunately, XT9 will interfere with the words selected by Swype even after you've picked the right word. The only way to disable this is to manually change to Touch Input keyboard and disable XT9 on the keyboard before changing back to Swype.
I've already disabled both Spell Correction and Word Completion in Touch Input under Settings> Personal> Input> Touch Input> Options, but XT9 still turns on the next time I restart the phone.
Hi, I'm using swype too and haven't noticed any interference from XT9, but I might not have known what I'm looking for.
What are your symptoms?
I have had that happen to me before on certain Roms... cant tell you which one... usually, it works fine (I am using Topix Rom now)
When it did happen, I turned off XT9 under the settings but I ALSO opened the default keyboard and turned it off there but pressing the key.... moved back to swype after that and the xt9 word options were gone... just the usual swype dictionary/options at times.... Soft reset didn't change anything... it was all ok still
Hope this helps
Unfortunately for me, once I shutdown/soft reset the phone, XT9 is automatically activated on the Touch Input keyboard again even though everything has already been turned off in the Settings>Personal>Input. Also, it seems that the Touch Input keyboard automatically defaults to one of the Chinese input methods instead of English. Maybe that's where the problem lies. Where can I default the Touch Input keyboard to English?
BTW, I have my Locale set as Australia, so that isn't the problem.
The symptoms are: Once you've "Swyped" the word and pick the one you want, XT9 then shows up with it's word choices and either shows the same word or if I have it initial caps, make it all small letters
I also noticed that in Settings>Personal>Input, when I select Swype then click the "OK" button, it doesn't save the selection, and goes back to "Touch Input" when I open the "Input" dialogue again. I guess this probably means that some of my registry entries are toast...
That is indeed weird... do you have something like SIP change installed? I use that to start Swype by default during startup after a restart.. Don't know if that might help...
Yes, I do have SIPchange installed, but it's already set to Swype as the default.
I had the same problem and this is my partial solution.
Go to HKLM/Softwares/Tegic/eT9/IsSupportMSSIPContact
Change the Dword from 1 to 0.
this will get rid of XT9 for Swype but only if it is NOT the default. Therefore, there is the nagging inconvenience of having to change it to Swype every time your soft reset. But it is better than that nothing.
Thanks for the partial solution. It's at least better than what I'm doing now after every reboot, which is to:
1. change Swype to Touch Input
2. change Touch Input to EN so that the keyboard shows up
3. click on the XT9/ABC button
4. change Touch Input back to Swype..
One thing to note, I just went to the registry and there isn't the value you listed. However, there is the following string value:
HKLM\Software\Tegic\eT9\LRU_MS_InputMethod and the value is Swype.
I'm wondering if this is what is causing XT9 to activate when Swype is active.. Do you have this value in your registry? what value is it?
Quick edit to note that I added a DWORD IsSupportMSSIPContact with value "0" and soft reset... Sorry to say that it didn't disable XT9 even if Touch Input was defaulted. Guess my problem is slightly different than yours.
Yes, all those values are the same. Need ot check if you also disable xt9 using some .cab. If not then you will need to do the following:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409\Ime File
Change it to read as compime.dll
and
HKLM\System\CurrentControlSet\Control\Layouts\e0010409\Layout Text
Change to COMP IME
This will disable eT9. Please remember the original values should you want to revert back.
I think that should work.
have fun.
weenween, the two registry values you gave are already what is on my phone..
But XT9 still enables itself when I restart the phone. I've now resigned myself to disabling XT9 on the Touch Input keyboard manually each time I restart the phone.
In any case, thanks for your help.
I have exactly the same problem adn symptoms as GregWee. Must be becasue we both have Hong Kong HD2s where the default english keyboard is PinYin?
I have a similar issue. I have a TMOUS HD2 with QQ 2010 mobile loaded on it for chinese text entry. The QQ keypad has become the default everytime I reboot - entirely unwanted. Somehow it interferes with the contact dropdown list in messaging and email. It has something to do with the T9 staying on when entering a contact name. I installed sipchange but it does not overide the QQ default after a soft reset.
After changing between keyboards a few time it begins to work properly in email and then finally in messages. Right now, since the last soft reboot and playing around, when I am in either email or messages the stock keyboard will automatically switch from T9 to abc when I move the cursor to enter a contact name. The contacts appear as I type as they should. Swype works fine too. I have no idea what I did to get it to work but I have had the same experience several times today. Hopefully I will figure it out.
I would like to know a way to override the QQ as the default keyboard. I think this might fix the problem.
Any suggestions?
I've searched everywhere, and cannot find any patch or how-to on this topic.
I really can't stand XT9/T9 input, but each time i set it to ABC, it's back to XT9 the next time I replay on a sms. some places XT9 is disabled, but i want it completely disabled.
Anyone who can help me here?
I've tried browsing trough all settings, but cannot find anything about disabling xt9
Press the gear-button on the keyboard>Text input>uncheck Prediction. Done.
orgasmatrond said:
Press the gear-button on the keyboard>Text input>uncheck Prediction. Done.
Click to expand...
Click to collapse
And how do i disable that irritating xt9 permanently on my HTC s740?
I am looking to disable the XT9 keyboard settings on startup in my ROM. I know the registry for the key is stored in HKLM\Software\Tegic
I dont know which keys I need to change to disable on startup.
I have tried searching the forum and also searching registery keys with both XT9 enabled and ABC enabled. I would like to enable ABC by default when the HD2 first boots up.
Any help would be appreciated.
Answer is in second post!
;word completion disabled
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9]
"WordCompletion"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime]
"ContextAwareGlobal"=dword:00000000
"TextInputMode"=dword:00000000
use CeRegEditor to find changes in registry.
Brilliant will try that now!
Edit: Seems to work after a restart cheers!