Help : S-ON issues - myTouch 3G, Magic General

HI all.
I have an htc magic TIM 32a ,and i was using SPL 1.76.2007 S-OFF, radio 6.35 with HTC sense .
I flashed something for a mistake ,and i got radio 3.22.20.17 and SPL1.33.2010 S-ON now. I tried every 1.33.xxx engineering SPL via recovery 1.5.2, but the S-ON won't change;
how can I get back to 6.x + 1.76.x ? I tried the RUU upgrader , but it failed in the second step ( writing system ..)
thank you!

what have you flashed wich has made become on ?

Related

stuck on mytouch splash screen

I followed the gold card procedure on theunlockr.com because I got the Main version older error for MT3G. So I made the gold card and did everything down to step 28, applying the Hboot img file as update.zip and once I did it I pressed home and back and now gets stuck on the green mytouch splash screen and does Nothing!I even tried wipe before I loaded the update.zip(Rom-RAv1.1.0H-signed-update), and i aslos tried erasing it off my sdcard then reloading it and still nothing. I can apply it but once I reboot Im stuck at the mytouch screen.I can still boot into fastboot and recovery. Can anybody help me.
just go to the recovery and flash the death spl and the required radio (in my sig) make sure you flash the radio first and then the death spl. If you already have the radio then just flash the spl. (to check radio and spl just boot into fastboot and it should say it near the top.) hboot = spl.
Then flash a ROM like super d or dwang or flash the defang base then flash cyanogen mode.
It should boot up perfectly fine now.
AndroidNoobie said:
just go to the recovery and flash the death spl and the required radio (in my sig) make sure you flash the radio first and then the death spl. If you already have the radio then just flash the spl. (to check radio and spl just boot into fastboot and it should say it near the top.) hboot = spl.
Then flash a ROM like super d or dwang or flash the defang base then flash cyanogen mode.
It should boot up perfectly fine now.
Click to expand...
Click to collapse
okay when I boot in fastboot,
sapphire pvt 32b eng s-off h
hboot-1.33.2005 (sapp30000)
cpld-10
radio-3.22.20.17
so i need to flash the radio then spl then rom? I have mytouch 3g.thanks for helping me
BossLady said:
okay when I boot in fastboot,
sapphire pvt 32b eng s-off h
hboot-1.33.2005 (sapp30000)
cpld-10
radio-3.22.20.17
so i need to flash the radio then spl then rom? I have mytouch 3g.thanks for helping me
Click to expand...
Click to collapse
We already sorted this out so can a mod close this thread.

Trouble flashing new ROM - Please Help!

Hello All,
I have been trying for the past few hours to root my HTC Magic 32B (Vodafone UK) and flash Cyanogen to get me some android 2.2!
The phone was on Android 1.6 before i started the process. I have since managed to roll it back to the vulnerable 1.5 version using a goldcard and sapping.zip
I have also managed to push RA-sapphire-v1.7.0H onto the phone.
Now every time i wipe and then flash any of the cyanogen ROMs using the recovery mode, it hangs at the Vodafone screen when booting. Now I had a look around and there were suggestions of trying a different ROM. I tried this and get the same result every time. I have installed 4 different versions of Cyanogen as well as numerous other ROMS.
An interesting point, I have a magic 32b and yet when trying to push the 'G' version of the recovery-RA file, the phone does not turn up under 'adb devices' but when pushing the H version, the phone responds as it should and loads the correct recovery file. I have tried both 32A and 32B ROMs to no avail they both still lock up at the Vodafone splash screen
I can restore to 1.5 without any problems, but I dont want to be stuck on this version of Android
A little info about the phone:
Firmware version: 1.5
Build Number: 2.16.151.1 146733 CL#31685 test-keys
SAPPHIRE PVT 32B SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-10
RADIO-3.22.20.17
May 8 2009,21:02:32
Many thanks in advance for any help you can provide!
There is guide on wiki.cyanogen you must be ona 1.5 version just read whole guide and it will be a success
If you have RA -h recovery working use it to flash hboot 1.33.2009
Then boot into fastboot and issue
Code:
fastboot erase system -w
fastboot erase boot
Here you can either boot onto recovery and flash the ebi1 version of cm. (Yes historical for 32a but seems your newer rom is using the 32a radio)
Or install a 2.x radio via fastboot (you must not flash it from recovery or you will brick your phone)
Last I checked cm wiki deals with 32a radios on 32b devices badly
Diekund said:
An interesting point, I have a magic 32b and yet when trying to push the 'G' version of the recovery-RA file, the phone does not turn up under 'adb devices' but when pushing the H version, the phone responds as it should and loads the correct recovery file.
SAPPHIRE PVT 32B SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-10
RADIO-3.22.20.17
May 8 2009,21:02:32
Click to expand...
Click to collapse
1) You see the last "H" in the first line of your info?
That means you need to use H-recovery and not G-recovery!!!
First problem solved....
2) You see the radio version 3.22.20.17?
Thats is only for 32A boards.. be lucky that you did not brick your device..
You need this radio and only this radio: 2.22.19.26I
But there is something wrong with combination of the info you wrote..
All 32B devices have G as the last letter in the first line of thire spl..
Are you sure that what you wrote is correct?
To solve this, flash back your stock version... use RUU or whatever... No sappimg or goldcard...
Just bring back the phone to where is was when you got it from the shop.
Then follow this guide made by me:
http://forum.xda-developers.com/showthread.php?t=756942
it will root you device in 5 mins... and for 5 min extra you get custom recovery and engineer spl( <-optionel)... FULL CONTROL OF DEVICE, the right way!
mumilover said:
2) You see the radio version 3.22.20.17?
Thats is only for 32A boards.. be lucky that you did not brick your device..
You need this radio and only this radio: 2.22.19.26I
Click to expand...
Click to collapse
This is FUD .. thats why its not bricked.
3.x = EBI1 (The -h recovery [magic] and -r recovery [dream*] is EBI1)
2.x = EBI0 (The -g recovery [magic] and default recovery [dream*] is EBI0)
* Please don't install the dream recovery on the magic it won't work its missing a config file for sapphire
both magic 32a/32b can run both
HOWEVER you must have the correct kernel to boot the device and if you have a 3.x radio and flash a radio from recovery you will brick since your current recovery can't boot after the flash.
Easiest is as I said install the engineering SPL that also supports both radios and fastboot yourself a stable system.
(the only reason its not booting with the EBI1 magic32a rom now is probably its not being properly wiped)
As far as using fastboot to restore a 2.x radio and -G recovery:
32A devices (ignoring the fender for the moment) will not be able to use all their memory on a 2.x radio
32B devices run the same on both radios; however more roms assume you have a 2.x radio.
If you go to cyanogens website, the EBI1 kernel should be available in the downloads. Just reflash the 5.0.8.zip, then flash the EBI1.zip, and then GAPPS.
EDIT: Here you go http://forum.cyanogenmod.com/topic/394-cyanogenmod-5-for-dreammagic-mean-lean-pastry-machine-v508-06192010/.
Sent from my HTC Magic using XDA App
DonJuan692006 said:
If you go to cyanogens website, the EBI1 kernel should be available in the downloads. Just reflash the 5.0.8.zip, then flash the EBI1.zip, and then GAPPS.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
you rock my world haha
Thanks so much buddy, this little trick hit the spot and im now running android 2.2! hopefully its nice and easy to update my roms from now on

Help! Accidental flash of 6.35 radio on 32B.

I accidentally flashed the 6.35 radio onto my 32B and i've been trying to flash my radio back to 2.XX and it just freezes.
My phone is a 32B T-Mobile MyTouch 3G but it says...
Sapphire PVT 32A ENG S-OFF H
HBOOT-1.33.2010 (Sapphire)
CPLD-10
Radio-6.35.10.18
Are you using recovery mode to flash your radio or fastboot?
http://forum.xda-developers.com/showthread.php?t=787674&page=2
read my posts and use the radio switcher tool in my signature...
When you have fixed the spl, flash the right spl/radio combo for your device.
Don't use the files with tool... they are for 32A... only use the spl image to fix your spl.

[Q] badly needed vodafone egypt rom

hi all
i have bricked htc magic wrongly flash radio with perfected spl
& the only get to fast & hboot no recovery & restarting on logo
it's original details
32a s on h
hboot-1.33.0010 sapp10000
radio-3.22.20.17
now it's on
32a s on h
hboot-1.33.0010 sapp10000
radio-6.35.08.29
i tried every thing
i only need the sappimg to this phone it's cid is HTC _45
for notice the phone refuse to flash any hboot any radio any sppimg any recovery through fastboot (not allowed) & also refuse to erase
i only need the sappimg to this phone it's cid is HTC _45

[Q] Cannot flash custom ROM, what am I doing wrong?

I decided to use my old HTC Magic as a second phone, but I realised that 1,5 is too old. So I thought I should root it and flash a custom recovery and ROM, how difficult can it be, right?
The phone is a black Magic without the 3,5 jack. I believe it's unbranded, the splashscreen is HTC.
Info before doing anything on it:
PVT 32B SHIP S-OFF
HBOOT 1.33.0010 (SAPP 10000)
CPLD - 7
RADIO 3.22.20.17
I found out that the HBOOT is a "perfected" SPL, so I followed a guide with the goldcard to flash a stock ROM with another SPL.
Info after that:
PVT 32B SHIP S-OFF
HBOOT 1.33.0009 (SAPP 10000)
CPLD - 7
RADIO 3.22.20.17
I also followed the guide in this forum to root the device and flash an eng SPL. now the SPL is 1.33.2010.
Amon_RA's recovery did not work for me, the home button (for confirmation) is not working in recovery. Instead, I flashed Clockwork recovery and I was able to have full functionality in recovery mode.
Now I am trying to install a custom ROM. Most links are broken, so I went with what was available: Cyanogen 5.0.7 final with GAPPS and Cyanogen 6.1.
The problem is that both ROM's I tried will install successfully, but when I reboot the phone it will just hang on the HTC logo.
What am I missing?
Thanks in advance.
A lot of frustration accompanied by the fear of bricking the phone results in a great deal of stupidity...
I hadn't flashed a kernel.
Please mark this as solved.
Orang foks

Categories

Resources