Database Users

Myouch 3G 1.2 Cant flash anything

So i had to fix the SPL on the mytouch because i kept getting the Fastboot Remote Not allow, So i did the SPL Fix and rebooted and i had a black HTC Magic screen, Got some progress then it said to throw a rom on there but i couldnt get to recovery, i try to flash a recovery and i get remote signature verify fail. So i tried flashing the SAPPIMG again and it is stuck on unzipping, Rebooted again and tried to flashboot boot recovery.img it transfers the recovery and reboots and stuck ad the black htc magic screen again.
Well i made some progress i can flash recovery and stuff now but it wont boot to recovery, i got the recovery to flash successfull but for some reason when i hold home and power it sits at the magic screen
As of right now i have
SApphire PVT 32a eng s-off h
hboot-1.76.2007
cpld-13
radio-6.35.10.18
Well i think ive done everything to this phone............ would be nice to figure somthing out. Been working on it since about 10AM this morning and i got nothing, does anyone have a fix?!
Any help would be appreciated!! Thanks Guys!!

Its bricked. The mytouch 1.2 can only run 1.33.0013 spl and the 2..x radio. Its a hybrid hardware. 32a board with a 32b radio.

NetrixTardis said:
Its bricked. The mytouch 1.2 can only run 1.33.0013 spl and the 2..x radio. Its a hybrid hardware. 32a board with a 32b radio.
Click to expand...
Click to collapse
I can flash a new radio on it and a new SPL on it, it takes that when i flash it

To root the phone you need to use the ENG spl 2010 flash your custom recovery, then stock radio and spl. After that, flash ROMs thru recovery. You can not use any other radio/spl at this time.

NetrixTardis said:
To root the phone you need to use the ENG spl 2010 flash your custom recovery, then stock radio and spl. After that, flash ROMs thru recovery. You can not use any other radio/spl at this time.
Click to expand...
Click to collapse
I think i bricked it now..... it stuck on a 0009 SPL and i cannot do a sappimg it wont unzip and i cannot flash a different spl it does the signature verify fail

Does your phone have the 3.5mm jack? Are you sure you've got a 1.2?

Well, If your phone still turns on and your have a working goldcard, try the ENG 2010 SPL from the Magic SPL thread. once you are back down to 1.33.2010 SPL and 3.22.x radio, fastboot your custom recovery, flash stock mytouch 1.2 radio then spl.
At that point, you won't have any OS tho. so, go into recovery, wipe all (but NOT your SD goldcard). Then flash custom ROM+gapps (if needed)

What is your fastboot info RIGHT NOW....

Remember that if you have a MyTouch 1.2 (with 3.5mm headphone jack) you MUST have the following AFTER you flash your custom recovery.
Radio: 2.22.23.02
SPL: 1.33.0013
So use the engineering SPL (2010) and 'fastboot flash recovery recovery.img' with a Amon_Ra 1.7.0G or Clockwork Recovery for MyTouch devices (NOT MAGIC).
Afterwards reboot to your recovery by holding HOME while booting. If you can boot into recovery then flash your stock spl (1.33.0013) back. Then flash your rom.

supercobaltss said:
So i had to fix the SPL on the mytouch because i kept getting the Fastboot Remote Not allow, So i did the SPL Fix and rebooted and i had a black HTC Magic screen, Got some progress then it said to throw a rom on there but i couldnt get to recovery, i try to flash a recovery and i get remote signature verify fail. So i tried flashing the SAPPIMG again and it is stuck on unzipping, Rebooted again and tried to flashboot boot recovery.img it transfers the recovery and reboots and stuck ad the black htc magic screen again.
Well i made some progress i can flash recovery and stuff now but it wont boot to recovery, i got the recovery to flash successfull but for some reason when i hold home and power it sits at the magic screen
As of right now i have
SApphire PVT 32a eng s-off h
hboot-1.76.2007
cpld-13
radio-6.35.10.18
Well i think ive done everything to this phone............ would be nice to figure somthing out. Been working on it since about 10AM this morning and i got nothing, does anyone have a fix?!
Any help would be appreciated!! Thanks Guys!!
Click to expand...
Click to collapse
I had the same issue the other day while experimenting on my mt3g 1.2. What worked for me was using adb to push the stock mt3g hboot and radio and then rerooting my phone. You can download the files you need from the unlockr.com web page and skim his how-to for android in the unrooting section. Hope this helps.

does it still boot into fastboot, hboot, or recovery?
supercobaltss said:
I think i bricked it now..... it stuck on a 0009 SPL and i cannot do a sappimg it wont unzip and i cannot flash a different spl it does the signature verify fail
Click to expand...
Click to collapse
if it boots into fastboot, hboot, or recovery you are not sunk yet. you will need the "official" sappimg.zip or .nbh on your gold card, but it should go through the steps and re-image it.. this will get your phone back to stock.
are you using a Tmobile MyTouch 1.2? or are you using a Rogers Magic?
the files will be different as the hardware requires differnent drivers.
there are many links on this site, or theunlockr.com that will get you the correct files you will need. make sure you check the md5 sums on anything you download to make sure its not corrupted before trying to flash it.
hope this helps.

Phone won't boot anymore :(

I created a goldcard and reinstalled the SAPPIMG.zip
After this i tried to do fastboot boot <RA recovery.img>
This didn't work, when i did fastboot flash recovery <RA recovery.img> I can boot in RA recovery.
I applied the update.Engineering-SPL-HBOOT-1.33.2005-signed.zip
After rebooting to fastboot i get the following details
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2005 (SAPP10000)
CPLD-10
RADIO-2.22.27.08
apr 20 2009, 15:30:43
After rebooting in recovery i aplied Cyanogen's cm 6.1 rom.
But now my phone keeps rebooting
what did i do wrong, and what can i do to start my phone again ?

Do a full wipe then flash the rom again

Sorry, that didn't solved my problem.
meanwhile i flashed my hboot with 0013d
but this didn't solve the problem eighter
i am stuck

If you installed the 0013d hboot you also want the 27.08 or 28.25 radio.
Try installing ezgingerbread or cos-ds and tell if that boots

tvall said:
If you installed the 0013d hboot you also want the 27.08 or 28.25 radio.
Try installing ezgingerbread or cos-ds and tell if that boots
Click to expand...
Click to collapse
He's probably effed himself unless he can still get into recovery.

DonJuan692006 said:
He's probably effed himself unless he can still get into recovery.
Click to expand...
Click to collapse
I don't think so. He can sappimg.zip back to stock most likely if he killed the recovery

Thanks for the help
What i did was
Unroot device and install cupcake
Root phone using goldcard
Install radio 2.22.27.08/2.22.28.25 & hboot 1.33.0013d
Install EzGingerbread
I hope i can help others with this solution.
Thank you tvall

What else should i try?

Yesterday I got a phone from a friend. Mytouch3g
he gave it to me because it got stuck on the green splash screen.
I thought to myself hey i can probably fix it... well im out of ideas.
FASTBOOT:
SAPPHIRE PVT 32B ENG S-OFF
HBOOT-1.33.2005 (SAPP30000)
CPLD-10
RADIO-3.22.20.17
Apr 20 2009, 15:30:43
When i got it i was S - ON
i followed this tutorial
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
And i have gotten to S-OFF
Now i tried to flash some ROMs that i downloaded from here but no matter what i do it still gets stuck on the the green splash screen.
Also the recovery flash didn't stick
i always have to run this to get to the custom recovery
fastboot boot recovery-RAv1.2.0H.img
i don't know what else to try or what rom to try to get this thing to boot to android. And im afraid that if i keep messing with it I will brick it completely.
Please give me some ideas or directions on what to do.
Thx.
Im on TMOBILE US
OH I also tryed the RUU's but non of the US once worked.
I would just like it back to stock.

No one has any suggestions or ideas?
I spend many hours on the website and the interwebs and followed all sorts of tips and suggestions.
Also none of the threads with the stuck on the green splash have any resolution and concrete solutions.

Are you actually flashing the recovery, or just booting it? Try fastboot flash instead of boot.
Also you have the 3.22 radio, so you have to either change it, or use an ebi1 kernel. I would recommended finding ezterrys guide to update to 2.22.28.25 radio and 1.33.0013d spl

tvall said:
Are you actually flashing the recovery, or just booting it? Try fastboot flash instead of boot.
Also you have the 3.22 radio, so you have to either change it, or use an ebi1 kernel. I would recommended finding ezterrys guide to update to 2.22.28.25 radio and 1.33.0013d spl
Click to expand...
Click to collapse
Yes i have flashed the new radio
This is what it had original .. i wrote it down
SAPPHIRE PVT 32B SHIP S-ON
HBOOT = 1.33.0013(SAPP30000)
CPLD - 10
RADIO 2.22.28.25
OCT 21 2009, 22:23:27
I tryed fastboot flash system recovery-RAv1.2.0H.img ... but that didn't hold.
Is this wrong?

djm3ph said:
Yes i have flashed the new radio
This is what it had original .. i wrote it down
SAPPHIRE PVT 32B SHIP S-ON
HBOOT = 1.33.0013(SAPP30000)
CPLD - 10
RADIO 2.22.28.25
OCT 21 2009, 22:23:27
I tryed fastboot flash system recovery-RAv1.2.0H.img ... but that didn't hold.
Is this wrong?
Click to expand...
Click to collapse
Several issues there... your flashing an old version of ra for the 3.22 radio to the system partition. You need to do this:
fastboot flash recovery recovery.img
And you need the G version of amon_ra recovery.
and you need to get back to an eng spl to do that...

OK well it sounds like i'm am definitively doing this wrong.
There is so much information and so many threads of doing different things, how ever i did not find one that has a complete spoon fed step by step tutorial.
STEP 1?
So download one of these from this thread
http://forum.xda-developers.com/showthread.php?t=530492
Latest :
recovery-RA-sapphire-v1.7.0G.img (Click here to download from a Mirror) - MD5Sum: 8b3b5ff90575eba0c5bfc13c0fa6b8ea
recovery-RA-sapphire-v1.7.0G-cyan.img (Click here to download from a Mirror) - MD5Sum: 8846b53e3184d688e3e8a628ad81074f
and what is the command to flash it????
fastboot devices (to make sure that fastboot "sees" your device)
fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img
Is this correct? How do i get the Radio/SPL. What should i search for?
I found this
http://forum.xda-developers.com/showthread.php?p=10692873#post10692873
RADIO
The new froyo OTA for the Fender/MT2.1 is RADIO-2.22.28.25 This is the same 2.22.28.25 that was pushed to the 32B phones.
If you have a rooted phone and wish to upgrade you can use the safe zip file I've provided before:
update_2.22.28.25_S.zip // mirror
md5: 2e384ab42da375458fdb135063b7536b
This will verify your system can safely install the new radio and ask you to install it.
Note: please ensure you have a backup before flashing this radio sometimes is known for some wacky things on first boot until you can get into the system and verify the clock is set correctly.
HBOOT
The new 32b HBOOT is the one you have always been using 1.33.0013
I've more recently have made a hacked version 1.33.0013d primarily for the Dream to have a larger /system size; However currently I also recommend it for 32b magic/sapphire users due to its reduced restrictions on flashing NBH files, as well as access to fastboot erase.
Since I don't think there is any nbh file safe to flash on the fender/MT1.2 the benefits of installing 1.33.0013d seem minimal on your phone.. however for advanced users, it will unlock fastboot erase. (useful for swapping roms; however most people can just use Super Wipe)
If you do wish to update to this I have a special update.zip to migrate from 1.33.0013 -> 1.33.0013d
update-1_33_0013-to-1_33_0013d_S.zip
MD5: a68743f0b0e40aec9e18cbd02e6128fa
Click to expand...
Click to collapse
how do i flash these?

BTW i appreciate all you help and support and if i figure it out, I will put together a detailed set of instructions for others that encounter this specific issue.

You have to get an Eng spl. Probably by flashing a sappimg with one. I'm on my phone and am too lazy to find one for you.
After that just flash recovery, radio, and hboot like ezterrys thread says.
fastboot flash hboot hboot.img (1.33.0013 or 1.33.0013d hboot)
fastboot flash radio radio.img ( 2.22.27.08 or 2.22.28.25)
fastboot flash recovery recovery.img
fastboot reboot-bootloader
I'm pretty sure those commands are right, but they are from memory and could be spelled wrong or be in the wrong order.

tvall said:
You have to get an Eng spl. Probably by flashing a sappimg with one. I'm on my phone and am too lazy to find one for you.
After that just flash recovery, radio, and hboot like ezterrys thread says.
fastboot flash hboot hboot.img (1.33.0013 or 1.33.0013d hboot)
fastboot flash radio radio.img ( 2.22.27.08 or 2.22.28.25)
fastboot flash recovery recovery.img
fastboot reboot-bootloader
I'm pretty sure those commands are right, but they are from memory and could be spelled wrong or be in the wrong order.
Click to expand...
Click to collapse
I did flash sappimg using a gold card. Then i got the Vodaphone splash screen.
Then i flashed the myTouch 3g splash screen .
This is the tutorial that i followed.
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
How does one tell if they have the ENG SPL?
Do i have to do it again or can i just flash the hboot and radio and recovery?
Fastboot info
SAPPHIRE PVT 32B SHIP S-ON (original)
SAPPHIRE PVT 32B ENG S-OFF (after flashing sappimg with gold card)

djm3ph said:
I did flash sappimg using a gold card. Then i got the Vodaphone splash screen.
Then i flashed the myTouch 3g splash screen .
This is the tutorial that i followed.
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
How does one tell if they have the ENG SPL?
Do i have to do it again or can i just flash the hboot and radio and recovery?
Fastboot info
SAPPHIRE PVT 32B SHIP S-ON (original)
SAPPHIRE PVT 32B ENG S-OFF (after flashing sappimg with gold card)
Click to expand...
Click to collapse
You want Eng s-off
What radio and hoot do you have now?

SAPPHIRE PVT 32B ENG S-OFF
HBOOT-1.33.2005 (SAPP30000)
CPLD-10
RADIO-3.22.20.17
Apr 20 2009, 15:30:43

Good. Now just follow the steps on this thread: http://forum.xda-developers.com/showthread.php?t=831139

That thread is confusing . I will give it a shot this weekend and report back.
Sent via - HTC SENSATION.

Well i did everything you said and now it's running.
Thank you.!

[Q] can't find perfect SPL 32B

I wanted to get my magic S-OFF in order to flash a splash using fastboot, so I flashed to hboot 1.33.2010.
but now my phone is stuck at the bootscreen.
I want to revert my Hboot to it's stock, perfect SPL version but I can't find this anywhere. Most SPL's I find here are engineer versions with S-OFF.
additional information
after flashing spl:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP10000)
recovery: recovery-RA-sapphire-v1.7.0G-cyan
before flasing this current spl it used to be:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013 (SAPP10000)
and this is what I want to restore it to. can anyone tell how to and where I can get this perfect SPL to flash it with my current recovery?

OMG, how teach users to read moreeeeeee?
Why did you flash hboot if i adviced you to flash custom ROM via custom recovery in previous topic?
Do you know that hboot 1.33.2010 for Magic 32A in general?
If you don't want get a brick - write full 5 rows of SPL-info (not only version of hboot)

I'm reading as much as I can untill I get headaches
and I did flash a custom ROM through recovery. but I wanted to get a different splash cause I'm sick of that ugly vodafone version so I changed SPL to get S-OFF for fastboot flashing.
and no, I didn't know 2010 is 32A only, guess I found out the hard way. I got this one cause it mentioned a .28.25 radio version so I assumed it right for my 32B. So I guess I did read all neccesary stuff, but I misjudged the 2010 SPL by the noted radio version.
anyway, as you asked the following information (assuming this is what you're after)
stock situation
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013 (SAPP10000)
CPLD-10
RADIO-2.22.28.25
Oct 21 2009, 22:33:27
current situation
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP10000)
CPLD-10
RADIO 2.22.28.25
JUN 2 2009, 17:27:03
I'm searching all over the place but I can't find a SHIP G-branded hboot version anywhere.

Flash this eng version: 1.33.2005 and see if it boots normal.
http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip
Source: http://forum.xda-developers.com/showthread.php?t=529019

onemanshow85 said:
current situation
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP10000)
CPLD-10
RADIO 2.22.28.25
JUN 2 2009, 17:27:03
I'm searching all over the place but I can't find a SHIP G-branded hboot version anywhere.
Click to expand...
Click to collapse
1. Configure Android SDK Tools to operate fastboot.exe (utility is in Platform-tools package)
2. Search for hboot 1.33.0013d (or 1.33.0013) and unpack it if it in archive (you need .img file)
3. If you already flashed Amon Ra 1.7.0 G skip this step, if not search for recovery (1.7.0 G is compatible with radio 2.22.28.25)
4. Cause you have engineering hboot, you can simply reflash to compatible hboot
Code:
fastboot flash hboot hboot.img
5. Run this command to reload
Code:
fastboot reboot-bootloader
6. You can flash custom ROM via recovery now (turn phone off then turn on by pressing Home + Power)

tnx for the help so far
@ mumilover
I flashed that SPL but I'm still stuck on bootscreen. I considered it being a faulty ROM after the SPL mess so I superwiped twice, wiped Dalvik-cache and reinstalled the Yoshi Froyo MM1 ROM, but the problem persists.
new SPL info, current situation
SAPPHIRE PVT 32B ENG D-OFF H
HBOOT-1.33.2005 (SAPP10000)
RADIO-2.22.28.25
Apr 20 2009, 15:30:43
@5[strogino]
I'm able to perform all the steps you posted. Only I can't find the correct hbot.
the only one I found is a 1.33.0013b version wich has a 2.22.27.08 radio. And I don't think my current ROM is compatible with that radio. found the hboot here http://forum.xda-developers.com/showthread.php?t=831139
Does SDK platform-tools house SPL/hboot images? if so I can't find them.
a side not; I managed to change my splash screen (wich caused the whole mess ) Don't suppose that's causing the bootstuck problem?

onemanshow85 said:
new SPL info, current situation
SAPPHIRE PVT 32B ENG D-OFF H
HBOOT-1.33.2005 (SAPP10000)
RADIO-2.22.28.25
Apr 20 2009, 15:30:43
@5[strogino]
I'm able to perform all the steps you posted. Only I can't find the correct hbot.
the only one I found is a 1.33.0013b version wich has a 2.22.27.08 radio. And I don't think my current ROM is compatible with that radio. found the hboot here http://forum.xda-developers.com/showthread.php?t=831139
Does SDK platform-tools house SPL/hboot images? if so I can't find them.
a side not; I managed to change my splash screen (wich caused the whole mess ) Don't suppose that's causing the bootstuck problem?
Click to expand...
Click to collapse
Yes. This is right thread and it contains 1.33.0013d (as i adviced)
1.33.0013d is compatible with 2.22.27.08 and 2.22.28.25, so don't worry
About platform-tools - you need working fastboot.exe utility, to do flash
Your main problem is that you have hboot/radio mismatch. Even you on 1.33.2005 - you are not able to use Yoshi ROM.
Your goal:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013d (SAPP10000)
RADIO-2.22.28.25
Apr 20 2009, 15:30:43
These hboot and radio are fully compatible with Ginger Yoshi or ezGingerbread.

do you want me to specifically use fastboot to flash? I can use my custom recovery aswell, it still works like a charm.
I indeed want the SPL configuration you listed as my goal. Only the hboot I'm about the flash (1.33.0013d) will be with radio version 2.22.27.08.
are Yoshi ROM or stock ROM compatible with that radio? I made a nand backup of stock ROM just in case

[SOLVED]
end result:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013d (SAPP10000)
RADIO-2.22.28.25
Oct 21 2009, 22:33:27
recovery: remained intact: Amon-RA v1.7.0G
ROM: Yoshi MOD MM1
First I flashed the radio, wich actually wasn't neccesary cause it remained the same. Then I flashed the hboot.
Good to know for other ppl, I flashed the images only, so not the zip. I flashed the hboot as last cause it disables fastboot flash method.
Then I booted to recovery, superwiped, factory reset-wipe, wipe cache, wipe Dalvik-cache, reboot to recovery and flashed Yoshi MOD.
al works good again. The best part is, I got my custom splash screen but I think there are more subtle methods to accomplish it. I guess you wouldn't want to get S-OFF unless is absolutely neccesary.
Tnx 5[strogino] for the help, I apreciate it.

onemanshow85 said:
Tnx 5[strogino] for the help, I apreciate it.
Click to expand...
Click to collapse
No problem, friend. Good to know that is happyend
Sent from my A7-040 using Tapatalk

[Q] Cannot flash custom ROM, what am I doing wrong?

I decided to use my old HTC Magic as a second phone, but I realised that 1,5 is too old. So I thought I should root it and flash a custom recovery and ROM, how difficult can it be, right?
The phone is a black Magic without the 3,5 jack. I believe it's unbranded, the splashscreen is HTC.
Info before doing anything on it:
PVT 32B SHIP S-OFF
HBOOT 1.33.0010 (SAPP 10000)
CPLD - 7
RADIO 3.22.20.17
I found out that the HBOOT is a "perfected" SPL, so I followed a guide with the goldcard to flash a stock ROM with another SPL.
Info after that:
PVT 32B SHIP S-OFF
HBOOT 1.33.0009 (SAPP 10000)
CPLD - 7
RADIO 3.22.20.17
I also followed the guide in this forum to root the device and flash an eng SPL. now the SPL is 1.33.2010.
Amon_RA's recovery did not work for me, the home button (for confirmation) is not working in recovery. Instead, I flashed Clockwork recovery and I was able to have full functionality in recovery mode.
Now I am trying to install a custom ROM. Most links are broken, so I went with what was available: Cyanogen 5.0.7 final with GAPPS and Cyanogen 6.1.
The problem is that both ROM's I tried will install successfully, but when I reboot the phone it will just hang on the HTC logo.
What am I missing?
Thanks in advance.

A lot of frustration accompanied by the fear of bricking the phone results in a great deal of stupidity...
I hadn't flashed a kernel.
Please mark this as solved.

Orang foks