Related
When my device P3600 received call or sms, the device is powered up, and then all the keys are active. If the device in case some key can be press (by mistake) and activate a program on this situation.
Does any one have a solution for that?
Use the Device Lock Feature in your Today Screen.
I do not like to add one more line to the dotay screen
can I use it without add it to the dotay screen?
If you don't want an additional line on the today screen then the other option is to set the device to request a password after only one minute of inactivity (under "Settings", "Personal", "Lock").
anonimo said:
If you don't want an additional line on the today screen then the other option is to set the device to request a password after only one minute of inactivity (under "Settings", "Personal", "Lock").
Click to expand...
Click to collapse
10x, but this is not help, the lock is form power up the the device, and the device is automitly powered up when received call or sms
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
iMike said:
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
Click to expand...
Click to collapse
in this case you can not aswers a call, when received one - because when the device is lock there is no quick way to answer that call.
or I miss someting here.
Carmi said:
in this case you can not aswers a call, when received one - because when the device is lock there is no quick way to answer that call.
or I miss someting here.
Click to expand...
Click to collapse
Yes you can answer a call, the device lock only lets you use the power, answer, and hangup buttons. When the call is finished it is still locked, unless you unlock it.
I use this one. http://www.mr2-power.com/downloads/DeviceLock.CAB
10x, GREAT, this will do the job
it is work fine - 10x
Carmi said:
10x, but this is not help, the lock is form power up the the device, and the device is automitly powered up when received call or sms
Click to expand...
Click to collapse
I am glad you found a way to solve your problem but I don't understand why my suggestion should not work. If you set your device to request a pin after one minute of inactivity if you receive a message the keys will still be blocked until you enter your pin. (I am talking about device PIN not SIM PIN).
And if you receive a call the answer button works even without entering a PIN.
anonimo said:
I am glad you found a way to solve your problem but I don't understand why my suggestion should not work. If you set your device to request a pin after one minute of inactivity if you receive a message the keys will still be blocked until you enter your pin. (I am talking about device PIN not SIM PIN).
And if you receive a call the answer button works even without entering a PIN.
Click to expand...
Click to collapse
Your solution works too, the only thing is sometimes (for example) I'm sitting on the couch using my phone for email or surfing and watching a TV program. I stop to watch something interesting for 3 minutes and my phone has locked itself with the pin lock. I have to enter the code each time this happens. It can get annoying. If I use devicelock, I lock the keys when I need to, obviously when I'm at home and my phone is on the coffee table, it doesn't need to be locked. I set my device pin lock at 2 hours, that should give the phone enough time to lock itself if I loose it...hopefully.
yeah... but when you loose your phone the device lock doesn´t matter. only reinstall a Rom and your phone can be used.
dersvenni said:
yeah... but when you loose your phone the device lock doesn´t matter. only reinstall a Rom and your phone can be used.
Click to expand...
Click to collapse
Yes, very true, but at least they won't be able to see all my contacts, appointments, notes etc. That being said, I always use FlexWallet to encrypt all sensitive information which is synchronized to my laptop.
touch screen and buttons can be locked during a call?
I followed up this thread and found it very interesting. But it does't focus all the problem:
when call's come in, your solutions are ok.
But when I want to make a call, I found there is a nasty *****, clicking to call waiting or to head speaker on, opening a note or calling my voice box etc. etc.
Then I found that it was my ear or my fingers, clicking on the touch screen or my fingers clicking hardbuttons.
I think tat during a call on the normal speaker the only buttons to be active should be "hang on" and "loud speaker on". With loudspeaker or BT on, or call terminated,s screen and buttons should come back to full function.
Anybody knows a solution to this?
Regards, and keep on, its a great forum. i love it.
iMike said:
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
Click to expand...
Click to collapse
Hmm this is just "device lock" that we can see in HTCplugin. In my case it does not turn off the screen. It just locks my device. Is everyone has "turn off the sreen" functionality?
> Karl der Käfer wrote:
>
> touch screen and buttons can be locked during a call?
I lastly tried the on-off button to block screen during outgoing calls.
I never did this before because I thought it would cancel the active call, but it doesn't.
Ok, I see it's more or less doing what I want. But it's very unconfortable. When I hit it bad, or don't hit it at all, or forget to press it?
Isn't there a posibility to have the screnn sensibility off, only sensibility, until the call is either ended, passed to outer speaker, headset or BT? or perhaps simply until I give it free manually?
It would improve safe usage of that phone remarkably, I think.
If not :-( , well, I allways can press the button ;-)
curious for what solutions you'll find on your problems with incoming calls. Perhaps that will give me an Idea.
Chears
I've complained about this on just about every major forum I have found. Hopefully, someone will eventually write an app to allow personalized device locking. I would set my trinity to not wake for ANYTHING and have ONLY the power button active. I would prefer to get audible alerts (or vibrate) to incoming calls, alarms and messages. Pressing power would be the only way to turn the device on. PIN features only annoy me. This would be very useful anytime I am not willing to immediately respond to a notification - driving, having dinner, in a meeting, etc. It could significantly improve battery life. I store mine in my pocket and accidental button press is a problem as well.
Hi,
Phone Lock on my HD2 is set to ask for password if phone is unused for 15 minutes. But my HD2 ask for Phone Lock password each time the screen goes off. Is it possible to change this behavior?
I have the same problem. The phone lock is set to 24 hours, but if the dispaly goes off and i power it on the hd ask for the phone lock password, too.
Can someone help?
Usually if I don't want the phone to lock, I just set the screen not to turn off at all. Under settings, display etc.
HI,
i want, that the screen is locked but only with the slider. At the moment i slide to unlick and then i have to enter the phone lock passwort. But this password should only appear if i restart my HD2 (for this reason i set the phone lock password option to 24 hours).
with my "old" HD this works great.
Download this cab file to your device > run > switch off > switch on
http://forum.xda-developers.com/attachment.php?attachmentid=246722&d=1258236796
Strange, does this fix work for everyone else?
After I installed it, once I press the power button to shut the screen off, when I press any of the hardware buttons, it dumps me to the screen that I was on, but no longer asking me to swipe. I guess I'm looking for the fix so that the below behavior happens:
1) If I press any of the buttons before my "timeout" happens, phone should ask me to swipe my finger to "unlock" the screen.
2) If I press any of the button after the "timeout", then phone should ask me to swipe but then also ask me to punch in a PIN or complex passwd, depending on the setting.
Are there any registry hacks that can do what I described? or does it do exactly that and it's my particular phone that isn't working?
thanks!
m1k1 said:
Download this cab file to your device > run > switch off > switch on
http://forum.xda-developers.com/attachment.php?attachmentid=246722&d=1258236796
Click to expand...
Click to collapse
Having been interested in exactly the same thing, it seems like this cannot be done at present. The lock is either there with a password or not there at all. My current compromise is to set a one digit pin, but that's a bit pointless really.
The slider can be added with S2U2 but this seems to defeat the object somewhat...
I have the same problem. I'd like to be able to lock the device (or at least to turn off the screen) without typing the password at each unlock. I set it to 24 hours.
The patch should be fine as temporary solution
Password lockout problem solved
Great,
this has solved my problem that intermittently and usually overnight I get 'incorrect password message' when I try to unlock, only solved by a soft reset which is rather worrying.
I don't want to have autolock, especially every time I switch on and off like you all.
This little add on allows manual lock (by setting widget on screen with SPB mobile shell), and I have set default to 12 hrs for password screen.
Many thanks
Rory
RoryC said:
my problem that intermittently and usually overnight I get 'incorrect password message' when I try to unlock, only solved by a soft reset which is rather worrying.
Click to expand...
Click to collapse
Ha! Think that's worrying? ...You're right.
I had this a few times in the past and each time was able to solve it by a soft reset.
Not the last time, though. After trying numerous soft-resets, I finally saw no other way out than to hard-reset my device. In the end, it didn't even display the "incorrect password" dialog anymore. I suspect I had entered an "incorrect" password too many times, but the device did not manage to present me with the "enter a1b2c3" prompt that it usually does when that happens.
Very, very frustrating. Some quick googling gives a few reports of this happening to other people, not just on HTC handsets either. Not too many though, so it sounds like it's pretty rare.
(For the record, running 1.48 WWE here, had a 7-digit simple PIN set as the device lock password, with Windows Default display)
i have the same problem it asks for password every time i unlock the phone and the bad thing is that sometimes even correct password doesnt seem to work so that i have to soft reset or wait for half an hour b4 trying the password again , just confused about it . australia
i took out my password for now. i have to reset once in 2 days now to unlock phone. i wont be able to make a call in case of an emergency so better option take it out.
mobilebuddha said:
Strange, does this fix work for everyone else?
After I installed it, once I press the power button to shut the screen off, when I press any of the hardware buttons, it dumps me to the screen that I was on, but no longer asking me to swipe. I guess I'm looking for the fix so that the below behavior happens:
1) If I press any of the buttons before my "timeout" happens, phone should ask me to swipe my finger to "unlock" the screen.
2) If I press any of the button after the "timeout", then phone should ask me to swipe but then also ask me to punch in a PIN or complex passwd, depending on the setting.
Are there any registry hacks that can do what I described? or does it do exactly that and it's my particular phone that isn't working?
thanks!
Click to expand...
Click to collapse
Is there any fix for this problem yet?
with S2U2 you can set up a password config. (require password every: 5mins/15mins/1hr/ 4hrs or 12 hrs) S2U2 seems to eat my battery up though, thats the downside. also you have to download the "disable autolock" cab for it to work from the tweaks an mods sticky in themes/ apps forum. its a shame about the battery drain as this app is awesome but definately worth a look.
sorry heres linkhttp://s2u2.ac-s2.com/
Same problem and no answer until now ?
I also have the problem that I cannot configure my HTC HD2 that the screenlock works without PIN. I like to start the secure lock only after a certain time i.E, but there is only the way everytime with PIN or at anytime with PIN.
Sometimes mostly overnight the device "forgets" the correct PIN and I have to make a softreset. After done this , I can enter the oriinal PIN.
Is there no solution until now ?
Is there any idea what to do.
Read tip 27 of the Sticky Tips and Tricks - http://forum.xda-developers.com/showthread.php?t=583638 - then the PIN will only be required after the timeout, not every time you lock the screen.
The bit where it doesn't accept the password is a known bug reported elsewhere, but there's no fix yet; I wish there was, because I get it occasionally.
Resolve screen lock issue by editing registry
Enable/Disable the Exchange security policy – HKLM\Security\Policies\00001023: 0 = Enabled; 1 = Disabled
Inactivity time
HKLM\Comm\Security\Policy\LASSD\AE\{50C13377-C66D-400C-889E-C316FC4AB374}\AEFrequencyType: 0 = No inactivity time; 1 = Activity time enable
HKLM\Comm\Security\Policy\LASSD\AE\{50C13377-C66D-400C-889E-C316FC4AB374}\AEFrequencyValue: number of minutes before timeout
thesedays74 said:
Enable/Disable the Exchange security policy – HKLM\Security\Policies\00001023: 0 = Enabled; 1 = Disabled
Click to expand...
Click to collapse
Until the buggers push it out again and you get fed up of having to set a PIN then edit the registry every day
Incidentally, is there a way to lock the screen without a PIN after a set period of time? All I can find is either a manual lock or a lock with a PIN.
Slidelock & pin code every time driving me nuts!
thesedays74 said:
Enable/Disable the Exchange security policy – HKLM\Security\Policies\00001023: 0 = Enabled; 1 = Disabled
Inactivity time
HKLM\Comm\Security\Policy\LASSD\AE\{50C13377-C66D-400C-889E-C316FC4AB374}\AEFrequencyType: 0 = No inactivity time; 1 = Activity time enable
HKLM\Comm\Security\Policy\LASSD\AE\{50C13377-C66D-400C-889E-C316FC4AB374}\AEFrequencyValue: number of minutes before timeout
Click to expand...
Click to collapse
I made these exact reg edits (my very first registry edit!) and it's made no difference at all, my HD2 still asks for pin every time I switch off & on.
I want to keep the slide lock to prevent accidental button presses when device is in my pocket, but the pin input is a pain my previous device only asked for it once every 24 hours or after powering up the phone. Has anyone solved this yet?
Should I change the registry back to pre-edited?
Disable hardware buttons
I realized one thing that is draining my battery is the accidental press on hardware buttons when my hD2 is in my pocket. Is there a way to disable the hardware buttons other than the end/power button when the screen is turned off ? It is silly that the press of any hardware button turn on the screen ...
If I press the right-hand button to put my HD2 in "suspend" (i.e. still on and able to receive calls but with the screen off and saving power) then it always insists on being "unlocked" as soon as I turn it back on. This was originally only mildly annoying - just required me to slide the slider - but since I've connected to my office Exchange server it now also inists on me entering a 4-digit PIN whenever the phone is unlocked. So now, just to bring the phone out of sleep mode I have to press the power button, slide the slider, then enter a 4 digit pin and press the "unlock" key. This is driving me up the wall! Is there any way to get the phone to be already unlocked when it comes out of sleep mode?
I'm using the T-Mobile version of the HD2, unflashed, if that makes a difference.
Shasarak said:
If I press the right-hand button to put my HD2 in "suspend" (i.e. still on and able to receive calls but with the screen off and saving power) then it always insists on being "unlocked" as soon as I turn it back on. This was originally only mildly annoying - just required me to slide the slider - but since I've connected to my office Exchange server it now also inists on me entering a 4-digit PIN whenever the phone is unlocked. So now, just to bring the phone out of sleep mode I have to press the power button, slide the slider, then enter a 4 digit pin and press the "unlock" key. This is driving me up the wall! Is there any way to get the phone to be already unlocked when it comes out of sleep mode?
I'm using the T-Mobile version of the HD2, unflashed, if that makes a difference.
Click to expand...
Click to collapse
Sounds more like an Exchange issue to me....
I do know that connecting to an exchange server can force the phone to ask for a PIN, which is fair enough really. What happens if you use BsB Tweaks and turn off the Auto Lock now? I'm guessing that it will still ask for a pin, but you won't need to slide to unlock.
Tip number 27 on this page: http://forum.xda-developers.com/showthread.php?t=583638
Now it should only ask for the PIN after the timeout period, not every time.
Try looking at my reply on the following thread. Works great for me
http://forum.xda-developers.com/showthread.php?t=591268
Hi all,
i use StocK ROM ICS, no root and Stock Kernel on my Note.
Most times i set my events on google calendar with settings popup 10 minutes before appointment will start. if you do so you will get a reminder on the phone like this one on screenshoot attached.
The big problem is now that i use PIN for security lock the phone, but after this reminder the whole phone is unlocked and you can use it normal without the need of the correct PIN!
In settings the phone still says, phone locked with PIN, but you can shut off the screen or let phone as it is until screen shuts off, but with power button or home button you can access the phone again without the need of the PIN
Phone stays in in this status until you set the PIN config again or some times it will be locked if an email or call gets in.
Does anybody else get this issue already?
Anybody else with this issue?
Can some one with LPY ROM test please?
-set phone via volume button to silent, vibration off also
- make an appointment with reminder 10mins before start time
than same screen should appear like on screenshot from previous post
now close the appointment and check if you can access the homescreen without the need of a PIN or pattern.
Thanks for a feedback.
Hi all:
I've always used Poweramp on every phone I've had, and I've always used it with Sync in my car. I just got a N6P, and I found that I couldn't change tracks with my car buttons. I went thru all settings and eventually got it to work, however it necessitates that I set the phone to lock immediately when hitting power button (or at least, to be locked, period). I never have my phones set to lock when I hit the power button, and furthermore the Sync is a trusted device for Smart Lock. I always set the phone to lock after 30 mins.
I've been searching around for an answer and can't find anything. Anything I find relates to "change tracks with volume buttons", but that's clearly not what I want to do: the point is to be able to skip tracks with the buttons on my steering wheel, and I don't want the phone to have to be locked!
There has to be an answer!