Hi all,
This always happened to me. In winmobile 6 and now 6.5. For some reasons since yesterday apps which installed to my storage card disconnected it's link or short cuts in the start menu. Now all of the apps in my storage card i can't access from start menu. when i clicked the app icon in my start menu my HD2 responded
"Cant open XXX. File is not registered or not trusted in digital signature, or can't find one of the files elements. Please resintall or restore this file."
I have to go to the file directory in my storage card to run the apps. This is very annoying and very inconivence. Anyone knows why? What's worse is that all of the new apps that i installed to my storage card has the same issue... Which means i can't no longer install apps to my storage card...
Help?
Use file explorer to find your chosen program icon /copy it
Still using file explorer go to device/windows/start menu/programs and paste shortcut using left hand bottom menu
Job done ! Rename it if you want !
DISREGARD THE LAST MADE AN ERROR !!
Use file explorer to find your chosen program icon /copy it
Still using file explorer go to device/windows/start menu/programs and paste shortcut using RIGHT hand bottom menu
Job done ! Rename it if you want !
if you go to file explorer can you read your sd card? I had the same issue and it was the sd card that failed so it could not read/find the program it was looking for. Try for kicks copying over some apps to a different storage card and retry. It will at least eliminate that possibility.
Yes, HD2 can read the SD card, and i have to go to the SD card location to run the apps. Just can not access from the start up menu...
InRBigness said:
if you go to file explorer can you read your sd card? I had the same issue and it was the sd card that failed so it could not read/find the program it was looking for. Try for kicks copying over some apps to a different storage card and retry. It will at least eliminate that possibility.
Click to expand...
Click to collapse
veryh2o said:
Yes, HD2 can read the SD card, and i have to go to the SD card location to run the apps. Just can not access from the start up menu...
Click to expand...
Click to collapse
So, install to phone mem instead and problem solved!
Anyone else can help? I think install to the main memory is not a very good idea.
pa49 said:
So, install to phone mem instead and problem solved!
Click to expand...
Click to collapse
I had the same problem you described. It happened after some old program I launched got the phone stuck and I had to pull the battery out to do a reset.
After the boot completed, I started to receive errors when trying to launch programs from the storage card. Uninstalling wouldn't work and reinstalling always failed.
Replacing the sd card didn't help either.
I believe that something corrupted the registry.
I finally gave up and hard reset.
The only good thing that came out of it was getting a new 16GB sd card for me to use.
My happened when i installed a lockscreen cab to my HD2 to the main memory. After that everything i installed to the storage card wont run from the startup menu.
Really? some dude told me to reformat my storage card. I'd rather do a hard resert cuz i have alot of crap in my 16G storage card.
I haven't gave up yet so i will still try to look for my other options... Thanks to know at least i am not the only one who encounter this fu**ing problem...
sg001 said:
I had the same problem you described. It happened after some old program I launched got the phone stuck and I had to pull the battery out to do a reset.
After the boot completed, I started to receive errors when trying to launch programs from the storage card. Uninstalling wouldn't work and reinstalling always failed.
Replacing the sd card didn't help either.
I believe that something corrupted the registry.
I finally gave up and hard reset.
The only good thing that came out of it was getting a new 16GB sd card for me to use.
Click to expand...
Click to collapse
help anyone? running out of options...
veryh2o said:
help anyone? running out of options...
Click to expand...
Click to collapse
Gave up and hard reset a couple of times, and i found out that the reason i can't click the icon in my start menu to access the apps which i installed in my storage card. It was because of i change the local and Text. I changed from Taiwan to USA and HD2 will not let me access the apps from start menu. This is very wierd, but if i change back to Region: Chinese Taiwan, then my HD2 is ok again... Just to share with you guys...
veryh2o said:
Anyone else can help? I think install to the main memory is not a very good idea.
Click to expand...
Click to collapse
Why is it not a good idea? Its what its there for so use it!
Related
Hi all,
i have a fresh JasJar and i need to install the .Net Compact Framework 2.0 but when i try to install (main memory) it gives me an unknow error number 4.
I have a lot of free space in my device, approx 30 Mb, so where is the problem ?
I need the .Net Compact Framework to run IBE Mail.
Bye
nicoska
Me too. I've tried closing applications, but without luck
RE
Using ActiveSync may give problem. I installed using the cab file method
You can get the cab file ffrom here (near to the bottom)
http://www.gopherking.com/download/
If you cannot install try install WiFiFoFum with the CF installer Package. After that remove WiFiFoFum (if not needed) and you'll have the CF left behind
http://www.aspecto-software.com/xoops/modules/wfdownloads/newlist.php
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Hi,
did you installed by .cab file or trough ActiveSync ?
thanks
Nico
nicoska said:
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Hi,
did you installed by .cab file or trough ActiveSync ?
thanks
Nico
Click to expand...
Click to collapse
I used the .exe file through active sync. I had reformatted my computer, I had performed hard resets numerous times on my EXEC and Net Framework 2 always installs without any problem to my SD Card and works very well.
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Are you sure it's actually on the SD card?
I tried telling it to install to SD-card three times (uninstalled between each attempt) and practically nothing went onto the SD card - it just created an empty folder there. :roll: Took out over 5-MegaByte of main memory though and didn't recover all of that when it was removed! :evil:
astage said:
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Are you sure it's actually on the SD card?
I tried telling it to install to SD-card three times (uninstalled between each attempt) and practically nothing went onto the SD card - it just created an empty folder there. :roll: Took out over 5-MegaByte of main memory though and didn't recover all of that when it was removed! :evil:
Click to expand...
Click to collapse
YES, I explored my SD Card and it has a folder named NetFrame2 or something like that under Windows>Programs
I did not loose any internal memory. As of now after a soft reset, I have about 32MB of internal memory with 31 different applications installed. 26 applications installed to my SD Card and 5 system applications installed on my internal memory. No freezes, no delays, no missed calls, no loss of system preferences, switching from landscape to portrait or vice versa takes 1 second, so I am pleased with my settings.
YES, I explored my SD Card and it has a folder named NetFrame2 or something like that under Windows>Programs
Click to expand...
Click to collapse
So did mine, but the folder was empty :?
astage said:
So did mine, but the folder was empty :?
Click to expand...
Click to collapse
I didn't actually clicked on the folder, I'll have to check that the next time I sync. I just assumed it was installed there.
cktlcmd said:
astage said:
So did mine, but the folder was empty :?
Click to expand...
Click to collapse
I didn't actually clicked on the folder, I'll have to check that the next time I sync. I just assumed it was installed there.
Click to expand...
Click to collapse
I hope you're lucky and it worked for you!
Might be worth checking the \Windows folder, however, as that's where I found all the .Net v.2 stuff dumped. The .Net v.1.x stuff is in ROM, so I'm hoping that a future ROM update will have v.2 in ROM.
Pants - just noticed that CF2 folder on SD card is empty!
Any solution to this?
Cheers,
Steve
(Am using Opera - apologies for double spaces)
I've looked into this a bit further, and according to the guys at Microsoft http://blogs.msdn.com/netcfteam/default.aspx - the Framework will always take up storage space, and it wouldn't work if it were only installed on the SD card.
Let's hope that a future ROM release will include it.
Cheers,
Steve.
Here is what I noticed on mine. I just performed a hard reset. I started out with 31MB internal memory. I opted to store NetFramework to my SD Card which is around 5MB in size. So if what you guys claim that NetFrameWork does not install to the card is true, it should eat up the 31MB internal memory right? But I still end up with 31MB internal memory after the install. I did check my SD Card and found the folder there which is empty if I clicked on it. But, my SD Card has less memory than I started with, close to 5MB. So my conclusion is: It installs to the SD Card but maybe active sync does not allow us to see the actual file and size, so it appears the folder is empty.
According to what Microsoft say:
Installing NETCF V2 to storage card
While it is technically possible to redirect installation of NETCF onto storage card via standard Active Sync/WCELOD capabilities, it won’t save precious RAM on device. NETCF files have to be in \Windows folder in order for NETCF to function properly.
If NETCF is installed to storage card, NETCF files will be initially deployed to it. However, at some point they would moved to \Windows folder taking out exactly the same space as normal installation would.
In some cases attempt to use storage card would lead to installation failure due to some subtle storage card issues. Thus it’s not recommended to install NETCF V2 to storage card or embedded storage and there are no benefits of doing so.
Click to expand...
Click to collapse
So try installing WifiFoFum (or another .Net CF2 app) and see how your memory availability alters.
Cheers,
Steve.
I also use WiFIFoFum and stored it to my card. It works great. After use of WiFiFoFum, my Internal Memory goes down to about 27MB, I already expected that. Closing all applications via settings puts my internal memory to about 29MB, also expected that as Windows Mobile 5 leaves some parts of the application open for faster reference the next time you open it up. After performing a soft reset my Internal Memory goes back to 31MB. So this still does not change my conclusion that NetFrameWork 2 was installed to my SD Card.
I had a problem installing .NET 2.0 and I found that if I rename/remove previous attempted installs (eg, the dir and files), my 2nd attempt is usually successful.
This goes for most any program that doesn't install properly. I've noticed that this usually happens to me after an upgrade of the same app.
cktlcmd said:
I also use WiFIFoFum and stored it to my card. It works great. After use of WiFiFoFum, my Internal Memory goes down to about 27MB, I already expected that. Closing all applications via settings puts my internal memory to about 29MB, also expected that as Windows Mobile 5 leaves some parts of the application open for faster reference the next time you open it up. After performing a soft reset my Internal Memory goes back to 31MB. So this still does not change my conclusion that NetFrameWork 2 was installed to my SD Card.
Click to expand...
Click to collapse
Are you talking about "Program" memory? I'm talking about "Storage" memory - I don't think that's affected when you open/close applications or perform soft resets...
Cheers,
Steve.
StevePritchard said:
Are you talking about "Program" memory? I'm talking about "Storage" memory - I don't think that's affected when you open/close applications or perform soft resets...
Cheers,
Steve.
Click to expand...
Click to collapse
Ohhhhhhh! My mistake.
Cheers mate!
FOSA said:
Using ActiveSync may give problem. I installed using the cab file method
You can get the cab file ffrom here (near to the bottom)
http://www.gopherking.com/download/
If you cannot install try install WiFiFoFum with the CF installer Package. After that remove WiFiFoFum (if not needed) and you'll have the CF left behind
http://www.aspecto-software.com/xoops/modules/wfdownloads/newlist.php
Click to expand...
Click to collapse
Great that worked for me!! Many thanks!!
J
Hey all,
I've searched through this as much as I could, and found a few things, but nothing that's ident.
My problem occurs even after a clean hard reset, and has only happened since the latest ROM update, so if anyone else has it please can you say if you get this problem... or don't...
Basically, my T-Mobile Pro will work fine for a while, but then I go to it any time after 10 mins of being clammed, and with virtually everything I try to load it comes up with an error dialog saying:
"The file 'X' cannot be opened. Either it is not signed with a trusted certificate, or one of tis components cannot be found. You might need to reinstall or restore this file."
But this is with EVERYTHING, HTCMesages.exe, HTCCalender.exe, Contacts.exe, TomTom Navigator.exe...... EVERYTHING, ARGH!
The only way to sort it is soft reset, and then everythings okay, for a while anyway... till all of a sudden.....
The only things I've got on apart from the standard T-Mobile ROM is TomTom Navigator 5.21 and PocketBreeze 5. But I'm sure it's nowt to do with either of those...
Please someone, anyone,,, HELP :-/
ARGH! Just after I posted before I hard reset and got it going again.... until now.... :evil: :evil:
1st: Do you use a SD Card? If YES, does the file you try to open in the SD card. Try using a different SD card and see if you still get the same Error Message.
2nd: Do you use WM5torage or Softick's SD Card reader? If YES to either of them, you might have set them on "ACTIVATE" mode then of course you will get the Error message if you try to launch any application on the card while using any of them because you gave the control to your computer to read the card instead. The solution is to keep then on INACTIVE state while using the apps or install them in the Internal Memory rather than the card.
Hope this helps.
cktlcmd said:
1st: Do you use a SD Card? If YES, does the file you try to open in the SD card. Try using a different SD card and see if you still get the same Error Message.
2nd: Do you use WM5torage or Softick's SD Card reader? If YES to either of them, you might have set them on "ACTIVATE" mode then of course you will get the Error message if you try to launch any application on the card while using any of them because you gave the control to your computer to read the card instead. The solution is to keep then on INACTIVE state while using the apps or install them in the Internal Memory rather than the card.
Hope this helps.
Click to expand...
Click to collapse
Thanks for your reply, but unfortunately it's not the SD Card, its core windows mobile applications aswell, like the contacts and messags.
I think it might have been to do with the ROM I was using, I was using T-Mobile's latest (still pretty jurassic though) but switched to the iMate one, and no problems now :-D
Surprised if it is the ROM though, as thought others would have got the error :-/
Here is the solution. I have a Samsung mobile phone and got this error after I installed Samsung's standard multimedia player "Touch Player" into My storage. Then I uninstalled it and re-installed into main storage and it works now.
I turned on my Hermes this morning and it started giving me a lot of errors on the today screen. They were errors regarding programs that were installed on the storage card and the device couldn't display everything (such as HTC Home, etc.) and locked-up. After a few soft-resets, still the same. I took out the card and put it in a card reader, but it seems that almost everything is gone from there and what's left, both files and folders, has weird names (»╣SöôdεÑ.z╕ë , ╔╞DGV)0.╡En , φE}░wx÷,.Γö6 , £#╚Ç3.3c, etc.). Also, the contents of the storage card show up as having 33.8 GB!!! How come?
What's to be done to recover my files?
I could hard-reset the device, but the data on the storage card is still gone! I don't care about the programs on it (I can reinstall those) but My Documents and other files that I had on it are important!!!
tibster said:
What's to be done to recover my files?
I could hard-reset the device, but the data on the storage card is still gone!
Click to expand...
Click to collapse
Try an application like memmaid or stk tools (or perhaps other people have better ideas/applications) to repair the content. Don't format the card yet!
Good luck
Optimistisch_nl said:
Try an application like memmaid or stk tools (or perhaps other people have better ideas/applications) to repair the content. Don't format the card yet!
Good luck
Click to expand...
Click to collapse
But there's nothing I can do with the device, since it locks-up, it doesn't synchronize with the PC... I actually had MemMaid installed, but the device does not respond. Also, MemMaid was installed on the storage card.
After hard-reset, device working, but still have the same problem with the storage card data (corrupted, lost?).
tibster said:
After hard-reset, device working, but still have the same problem with the storage card data (corrupted, lost?).
Click to expand...
Click to collapse
So install a 'repair utility' on the device and see what you recover on the SD card.
btw, I NEVER install an application on the SD card
Optimistisch_nl said:
So install a 'repair utility' on the device and see what you recover on the SD card.
btw, I NEVER install an application on the SD card
Click to expand...
Click to collapse
I have MemMaid installed on device, now. What's next? There's no data recovery tool in it (is there?).
I always had lots of programs installed on the storage card and had absolutely no problems (until now). I usually do that because the device memory fills-up tooooo fast. I had my Hermes for about 1 1/2 years with no problems of any kind.
Hey guys,
anyone having problems with their microsd card not showing in file explorer?
I'm using a SanDisk Microsd and it was working fine then disappeared.
It has been installed properly and WAS working.
I know its not the card as I have tried the card in a HTC Hero and it works fine. Also tried a 2gb microsd and it does not get recognised after disappearing from file explorer.
I have tried uninstalling programs to see if its a certain cab causing this but no luck. I have found that doing a hard reset restores the microsd in file explorer.
So far two hard resets have restored it but it seems to keep disappearing!!
Did you try another sd card?
It might be just card problem, if not....
[email protected] said:
Did you try another sd card?
It might be just card problem, if not....
Click to expand...
Click to collapse
Yeah tried a 2gb card that came with the HD2 but no luck
I mean it works after I hard reset but once it disappears HD2 won't recognise when I swap to a 2GB card.
Is this a bug? I don't think its a hardware issue as it shows when I hard reset.
Is your HD2 connected to the USB cable and PC when looking?
If so. Try again without the connection.
I thought I had a similar issue at first with mine - turns out, if I remove and re-insert the SD card - then open explorer and have it as high level view as poss (My Device) - Storage Card folder isn't there.....but then I scrolled to the bottom of the folder tree - and for some reason, once it's removed and re-inserted, the first time you use the explorer, it places that folder at the bottom (so off the screen) but it was there for me [once you've used explorer once and dont remove/re-insert card, it places the storage card folder back up the folder tree in usual place] - sounds like you have a more serious issue though if you've checked that and it's not even there.
htc-hd2 said:
Is your HD2 connected to the USB cable and PC when looking?
If so. Try again without the connection.
Click to expand...
Click to collapse
No not connnected to USB.
I just did another hard reset and it shows again. I installed a couple of cabs (Touch X Task Manager, tnyynt SD Tuneup) and everything is working fine. I then decided to do a soft reset and it disappeared again.
EDIT: I actually just uninstalled tnyynt SD Tuneup and did soft reset and microsd reappears in file explorer...hmm will have to investigate further.
you have to hard-reset.
I have the same problem when installing the coreplayer...then my storage card disappears. It seems like a driver or something gets deleted or messed up.
hard-reset and you will be fine.
also don't forget to format your SD card once...I forgot this too...maybe that helps too.
[email protected] said:
you have to hard-reset.
I have the same problem when installing the coreplayer...then my storage card disappears. It seems like a driver or something gets deleted or messed up.
hard-reset and you will be fine.
also don't forget to format your SD card once...I forgot this too...maybe that helps too.
Click to expand...
Click to collapse
I have hard reset but that is obviously not a permanent solution. It is not because of Coreplayer.
I have been using since uninstalling SD Tuneup and soft reset. Working fine for now so I assume it had something to do with using SD Tuneup with leo or wm6.5? Anyway will report back if any more dramas.
I can't find my SD card either seems that i have the same problem as you.. wtf to do??? have formated, an everything i know..
mooooooa said:
I can't find my SD card either seems that i have the same problem as you.. wtf to do??? have formated, an everything i know..
Click to expand...
Click to collapse
when did it stop working? does it appear after a hard reset?
Mine seemed to be associated with software I installed (namely tynnnt SD Tuneup). After I uninstalled it and did a soft reset it reappeared in file explorer...
motlking said:
No not connnected to USB.
I just did another hard reset and it shows again. I installed a couple of cabs (Touch X Task Manager, tnyynt SD Tuneup) and everything is working fine. I then decided to do a soft reset and it disappeared again.
EDIT: I actually just uninstalled tnyynt SD Tuneup and did soft reset and microsd reappears in file explorer...hmm will have to investigate further.
Click to expand...
Click to collapse
SD tuneup isn't designed for the qualcomm ..
the SD drivers are totally different on the Leo..
fards said:
SD tuneup isn't designed for the qualcomm ..
the SD drivers are totally different on the Leo..
Click to expand...
Click to collapse
Cheers for confirming that. I used it on my original Touch Pro and also on the Xperia X1 so I assumed it would work on the HD2, I assumed wrong! haha
motlking said:
when did it stop working? does it appear after a hard reset?
Mine seemed to be associated with software I installed (namely tynnnt SD Tuneup). After I uninstalled it and did a soft reset it reappeared in file explorer...
Click to expand...
Click to collapse
I installed tynnnt SD Tuneup in the beginning. Had a little bit probs with SD card in the beginning also, but yesterday when I moved some garmin maps over to the Sd card, it began stop working. performed a hard reset today and it's working again, but i would not install SD tuneup again this time
When I'm on "Documents" tab it says - "SD card is full or missing"
Any way around it ?
Come on ... nobody has this problem ?!!!
I had that problem too and I wish I could give you a way to fix it, but I had to perform a hard reset after WMWifiRouter screwed my WiFi up. Your post reminded me about the problem with the documents tab and I just checked it... turns out the hard reset also fixed this issue for me.
I'll let you know if it comes back and we can work out a fix that doesn't involve resetting everything on the phone.
I actually performed hard reset (because of a different issue). Unfortunately it did not fix Documents tab problem
are you using a ram disk at all? that is known to mess with the docs tab.
samsamuel said:
are you using a ram disk at all? that is known to mess with the docs tab.
Click to expand...
Click to collapse
I do not even know what is RAM disk on HD2. No, I do not use special RAM disk apps and my ROM is US T-Mobile HD2 stock ROM
bogdatov said:
I do not even know what is RAM disk on HD2. No, I do not use special RAM disk apps and my ROM is US T-Mobile HD2 stock ROM
Click to expand...
Click to collapse
hmm no clue then, sorry. Think if it were me i'd try copy off all the files and folders onto the pc then format the sd card and copy everything back, just to see.
Did you remove the original SD card that came with it? Or, replace it with another one? I know it's in the manual that once you do it, the SD card may not work anymore, or something like that. Maybe that's the cause, I'm just guessing since I don't have this kind of problem.
microSD card came with T-Mobile Hd2 (US version) already inserted. Did not touch it
I have this problem too with my Touch HD.
I can't read my documents. It says: "SD card is full or missing".
Any help. Please...
I've fixed this problem
I had this problem too
I've fixed this problem thus
I backed up all info the storage Card and I made a complete format the storage card complete under windows, after I copied all info into storage card again, and this operation fixed this problem
Dmonium
Excuse :me if my english is so bad
dmonium said:
I backed up all info the storage Card and I made a complete format the storage card complete under windows, after I copied all info into storage card again, and this operation fixed this problem
Click to expand...
Click to collapse
Did exactly same thing but it did not fix it for me
Format worked for me, although I'm pretty sure the SD card was fine, and was gonna compare the pre-format files to post-format and see if I accidentally deleted anything that would cause this. Was in a hurry though, and never ended up comparing.
Formatted(full) SD card on PC, then put in phone and formatted there to get the stock files back on. Then copied everything else over (TF movies, and my downloads, etc..). Worked fine after that.
Hi
I had the same problem and quicikly solved this issue:
Go to: \Carte de stockage or Storage card\Application Data\HTC\databases\DocExp
And delete 2 files: postlist.DB & value.DB
It worked for me, hope the same for you
Installing a network plugin caused the issue on mine, when I unistalled it worked again
mdean11 said:
Installing a network plugin caused the issue on mine, when I unistalled it worked again
Click to expand...
Click to collapse
mdean, do you happen to have the name or the cab handy, so I can take a peek at it for a possible connection to the cause? Thanks!
I tried 3 different ones, all caused the problem - generic network plugin, htc network plugin, and schnaps network plugin
SD Card is full or Missing - SOLVED
1. Delete the folder - Storage card\Application Data
2. Tab again the document tab - wait re-loading until finish searching all documents
3. Successful!
thanks dude i was having the same problem, when i enabled shared network folder in touch tool, it stop working but i went back and disabled it and now working again.
Glad you all figured it out... I had this problem 3 weeks ago and immediately after enabling and setting up the network plugin with Touch Tools 1.4. Luckily, I didn't have to look for the cause since the last thing I did was install & use the network plugin!
So, for future reference.........
Also, your facebook pictures in htc album's facebook tab will stop showing up if you manually assign a "CacheSize" value other than 0 to HKLM\System\StorageManager\FATFS.
Be advised!