Related
Hi all,
i have a fresh JasJar and i need to install the .Net Compact Framework 2.0 but when i try to install (main memory) it gives me an unknow error number 4.
I have a lot of free space in my device, approx 30 Mb, so where is the problem ?
I need the .Net Compact Framework to run IBE Mail.
Bye
nicoska
Me too. I've tried closing applications, but without luck
RE
Using ActiveSync may give problem. I installed using the cab file method
You can get the cab file ffrom here (near to the bottom)
http://www.gopherking.com/download/
If you cannot install try install WiFiFoFum with the CF installer Package. After that remove WiFiFoFum (if not needed) and you'll have the CF left behind
http://www.aspecto-software.com/xoops/modules/wfdownloads/newlist.php
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Hi,
did you installed by .cab file or trough ActiveSync ?
thanks
Nico
nicoska said:
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Hi,
did you installed by .cab file or trough ActiveSync ?
thanks
Nico
Click to expand...
Click to collapse
I used the .exe file through active sync. I had reformatted my computer, I had performed hard resets numerous times on my EXEC and Net Framework 2 always installs without any problem to my SD Card and works very well.
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Are you sure it's actually on the SD card?
I tried telling it to install to SD-card three times (uninstalled between each attempt) and practically nothing went onto the SD card - it just created an empty folder there. :roll: Took out over 5-MegaByte of main memory though and didn't recover all of that when it was removed! :evil:
astage said:
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Are you sure it's actually on the SD card?
I tried telling it to install to SD-card three times (uninstalled between each attempt) and practically nothing went onto the SD card - it just created an empty folder there. :roll: Took out over 5-MegaByte of main memory though and didn't recover all of that when it was removed! :evil:
Click to expand...
Click to collapse
YES, I explored my SD Card and it has a folder named NetFrame2 or something like that under Windows>Programs
I did not loose any internal memory. As of now after a soft reset, I have about 32MB of internal memory with 31 different applications installed. 26 applications installed to my SD Card and 5 system applications installed on my internal memory. No freezes, no delays, no missed calls, no loss of system preferences, switching from landscape to portrait or vice versa takes 1 second, so I am pleased with my settings.
YES, I explored my SD Card and it has a folder named NetFrame2 or something like that under Windows>Programs
Click to expand...
Click to collapse
So did mine, but the folder was empty :?
astage said:
So did mine, but the folder was empty :?
Click to expand...
Click to collapse
I didn't actually clicked on the folder, I'll have to check that the next time I sync. I just assumed it was installed there.
cktlcmd said:
astage said:
So did mine, but the folder was empty :?
Click to expand...
Click to collapse
I didn't actually clicked on the folder, I'll have to check that the next time I sync. I just assumed it was installed there.
Click to expand...
Click to collapse
I hope you're lucky and it worked for you!
Might be worth checking the \Windows folder, however, as that's where I found all the .Net v.2 stuff dumped. The .Net v.1.x stuff is in ROM, so I'm hoping that a future ROM update will have v.2 in ROM.
Pants - just noticed that CF2 folder on SD card is empty!
Any solution to this?
Cheers,
Steve
(Am using Opera - apologies for double spaces)
I've looked into this a bit further, and according to the guys at Microsoft http://blogs.msdn.com/netcfteam/default.aspx - the Framework will always take up storage space, and it wouldn't work if it were only installed on the SD card.
Let's hope that a future ROM release will include it.
Cheers,
Steve.
Here is what I noticed on mine. I just performed a hard reset. I started out with 31MB internal memory. I opted to store NetFramework to my SD Card which is around 5MB in size. So if what you guys claim that NetFrameWork does not install to the card is true, it should eat up the 31MB internal memory right? But I still end up with 31MB internal memory after the install. I did check my SD Card and found the folder there which is empty if I clicked on it. But, my SD Card has less memory than I started with, close to 5MB. So my conclusion is: It installs to the SD Card but maybe active sync does not allow us to see the actual file and size, so it appears the folder is empty.
According to what Microsoft say:
Installing NETCF V2 to storage card
While it is technically possible to redirect installation of NETCF onto storage card via standard Active Sync/WCELOD capabilities, it won’t save precious RAM on device. NETCF files have to be in \Windows folder in order for NETCF to function properly.
If NETCF is installed to storage card, NETCF files will be initially deployed to it. However, at some point they would moved to \Windows folder taking out exactly the same space as normal installation would.
In some cases attempt to use storage card would lead to installation failure due to some subtle storage card issues. Thus it’s not recommended to install NETCF V2 to storage card or embedded storage and there are no benefits of doing so.
Click to expand...
Click to collapse
So try installing WifiFoFum (or another .Net CF2 app) and see how your memory availability alters.
Cheers,
Steve.
I also use WiFIFoFum and stored it to my card. It works great. After use of WiFiFoFum, my Internal Memory goes down to about 27MB, I already expected that. Closing all applications via settings puts my internal memory to about 29MB, also expected that as Windows Mobile 5 leaves some parts of the application open for faster reference the next time you open it up. After performing a soft reset my Internal Memory goes back to 31MB. So this still does not change my conclusion that NetFrameWork 2 was installed to my SD Card.
I had a problem installing .NET 2.0 and I found that if I rename/remove previous attempted installs (eg, the dir and files), my 2nd attempt is usually successful.
This goes for most any program that doesn't install properly. I've noticed that this usually happens to me after an upgrade of the same app.
cktlcmd said:
I also use WiFIFoFum and stored it to my card. It works great. After use of WiFiFoFum, my Internal Memory goes down to about 27MB, I already expected that. Closing all applications via settings puts my internal memory to about 29MB, also expected that as Windows Mobile 5 leaves some parts of the application open for faster reference the next time you open it up. After performing a soft reset my Internal Memory goes back to 31MB. So this still does not change my conclusion that NetFrameWork 2 was installed to my SD Card.
Click to expand...
Click to collapse
Are you talking about "Program" memory? I'm talking about "Storage" memory - I don't think that's affected when you open/close applications or perform soft resets...
Cheers,
Steve.
StevePritchard said:
Are you talking about "Program" memory? I'm talking about "Storage" memory - I don't think that's affected when you open/close applications or perform soft resets...
Cheers,
Steve.
Click to expand...
Click to collapse
Ohhhhhhh! My mistake.
Cheers mate!
FOSA said:
Using ActiveSync may give problem. I installed using the cab file method
You can get the cab file ffrom here (near to the bottom)
http://www.gopherking.com/download/
If you cannot install try install WiFiFoFum with the CF installer Package. After that remove WiFiFoFum (if not needed) and you'll have the CF left behind
http://www.aspecto-software.com/xoops/modules/wfdownloads/newlist.php
Click to expand...
Click to collapse
Great that worked for me!! Many thanks!!
J
PROBLEM:
Now, the problem all started when try to format the micro SDHC on the phone or on the PC with card reader.
Tried with differ format program also low level not worked.
DONT USE THESE!!! Waste of time!!!
SOLUTION:
So after doing some thinking about the situation, I figured that there was a problem with the card inserted and find the file EncFiltLog on it.
It is the WM 6.1 encription file. You can't delete, move files from or in to the SDHC.
The best way to solve this issue, as the hard-reset DOES NOTHING to fix this issue, would be to have windows hopefully find the connected device and format it. Here are the EASY steps which DO NOT involve using a dozen computers and has provided the same result EVERY time; which is a working on my 8gig memory in my HTC HD.
1. Connect the HD to the computer and select DISK DRIVE as the option on the on-screen popup on your phone. Don’t select ACTIVE SYNC. If you miss it, then go into your phone and press START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok.
2. On your computer, (USING A WINDOWS XP MACHINE), go into your "My computer"
3. A window for will open with two columns.(If not, change the view to "Group") We are looking at the RIGHT side right now. In there is has three categories, and we are only focusing on ONE of them. LOOK for STORAGE which should be the center category.
4. Click with right to the desired "Storage device; A: ; D: E;", it will take a minute or two depending on your computer speed and environment to populate your hard drive and connected memory devices.
5. You will eventually see your PHONE internal storage listed. IT WILL TAKE SOME TIME BECAUSE YOUR PHONE INTERNAL STORAGE IS CORRUPTED!
***BE SURE WHAT YOU ARE LOOKING AT IS IN FACT YOUR PHONE AND NOTHING SOMETHING ELSE LIKE YOUR MAIN HARD DRIVE OR SOME OTHER STORAGE DEVICE WITH IMPORTANT FILES ON THERE***
****I TAKE NO RESPONSIBILITY IF YOU FORMAT THE WRONG DEVICE***
6. Choose format and let it format the drive. This should also take a few minutes. Select FAT32 and name is whatever you want! Let this finish COMPLETLY!
**Your almost done**
7. Now you can copy, anything you want on it, but if you put again in to the PDA then the
EncFiltLog will come on again. But at least you not have to throw away the card,
you can use it again.
8. Finally my last comment:
If you want to speed up the card (.cab installation, copy, move ...etc.....)
the best way after all this work listed above, you should made a BACKUP from all your PERSONALITIES and
make a HARD RESET.
After it should speed up all the programs and processions with the card.
If you done then one IMPORTANT THING!:
YOU SHOULD NEVER EVER TAP ON THE CARD ENCRIPTION IN THE SETTINGS,
NOT EVEN THINK ABOUT IT!!!!!!
Hope this helps you all out!!
BTW: I want to say thanks to XDA-FORUM (all people) to make my life easier
and to found the right gadgets to use, to play and enjoy it....
Wow - not bad at all for a first post!
Welcome to the forum!
Thanks for providing a solution!
krnkris said:
PROBLEM:
Now, the problem all started when try to format the micro SDHC on the phone or on the PC with card reader.
Tried with differ format program also low level not worked.
DONT USE THESE!!! Waste of time!!!
SOLUTION:
So after doing some thinking about the situation, I figured that there was a problem with the card inserted and find the file EncFiltLog on it.
It is the WM 6.1 encription file. You can't delete, move files from or in to the SDHC.
The best way to solve this issue, as the hard-reset DOES NOTHING to fix this issue, would be to have windows hopefully find the connected device and format it. Here are the EASY steps which DO NOT involve using a dozen computers and has provided the same result EVERY time; which is a working on my 8gig memory in my HTC HD.
1. Connect the HD to the computer and select DISK DRIVE as the option on the on-screen popup on your phone. Don’t select ACTIVE SYNC. If you miss it, then go into your phone and press START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok.
2. On your computer, (USING A WINDOWS XP MACHINE), go into your "My computer"
3. A window for will open with two columns.(If not, change the view to "Group") We are looking at the RIGHT side right now. In there is has three categories, and we are only focusing on ONE of them. LOOK for STORAGE which should be the center category.
4. Click with right to the desired "Storage device; A: ; D: E;", it will take a minute or two depending on your computer speed and environment to populate your hard drive and connected memory devices.
5. You will eventually see your PHONE internal storage listed. IT WILL TAKE SOME TIME BECAUSE YOUR PHONE INTERNAL STORAGE IS CORRUPTED!
***BE SURE WHAT YOU ARE LOOKING AT IS IN FACT YOUR PHONE AND NOTHING SOMETHING ELSE LIKE YOUR MAIN HARD DRIVE OR SOME OTHER STORAGE DEVICE WITH IMPORTANT FILES ON THERE***
****I TAKE NO RESPONSIBILITY IF YOU FORMAT THE WRONG DEVICE***
6. Choose format and let it format the drive. This should also take a few minutes. Select FAT32 and name is whatever you want! Let this finish COMPLETLY!
**Your almost done**
7. Now you can copy, anything you want on it, but if you put again in to the PDA then the
EncFiltLog will come on again. But at least you not have to throw away the card,
you can use it again.
8. Finally my last comment:
If you want to speed up the card (.cab installation, copy, move ...etc.....)
the best way after all this work listed above, you should made a BACKUP from all your PERSONALITIES and
make a HARD RESET.
After it should speed up all the programs and processions with the card.
If you done then one IMPORTANT THING!:
YOU SHOULD NEVER EVER TAP ON THE CARD ENCRIPTION IN THE SETTINGS,
NOT EVEN THINK ABOUT IT!!!!!!
Hope this helps you all out!!
BTW: I want to say thanks to XDA-FORUM (all people) to make my life easier
and to found the right gadgets to use, to play and enjoy it....
Click to expand...
Click to collapse
Yesterday it happens for the second time that my SD-Card gets corrupt again, the first time it happens with a 8 Gb SDHC Sandisk and now with a 16 Gb.! After a hard-reset.Didn't know before I read this post that this could happen ever!??
And indeed I couldn't write or read on the card or format it again, even with a cardreader!
Both cards are useless about €120,- thrown away, gone
Didn't know before I read this post, that this is an WM 6.1 encription issue. Never used or even tap it.
Now I format another 8Gb like the way you describe here, i hope that when i need to do another hard-reset i can use the card again!
BTW, its a little bit strange to me that there are so little reaction from other users here about EncFiltLog problem?
I hope that there will come a solution in WM 6.1 to prevent that b!llsh!t.
Thanks for the great support, i hope it realy works!
Nice post
I have one more question:
What may happen when I delete this encryption file? Is it possible?
P.S. Sorry for my english :/
Hi Everyone!
The best way, if you purchase a new card, to FORMAT at first.
Then you put in to your phone and try not to teke it out any more.
If you want to use it as USB reader the as I write in my first post
START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok .
In this case you can use the phone as a card reader.
It is speed up the file transfer vs. ACTIVESYNC.
If the card is not recognised ether way then,
because of the too much taking out - - put it back; went to faulty.
You can go back to the store for guarantee replacement.
The EncFiltLog is a problem only if you encrypted the card.
The solution to delete it and use as new card described in my first post.
If you put a new card in to the Phone then this file seem to be created by the OP system.
You can delete with format, but it will come back again and again.
krnkris said:
You can delete with format, but it will come back again and again.
Click to expand...
Click to collapse
Your right, the file is still there again!
But I have also a question about a next( hope not) hardreset on my device!
Is it better to format the SD-card (with USB on the device) before or after the hard-reset to save the further use of the card?
Because in my experience you have to start installing everything over again, because the data on the card was anyway corrupt and useless.
It is NOT recommended to use the MS Windows Format command to re-format any SDHC card - it will format them, of course, but with the wrong cluster size, slowing access speed down and possibly causing other problems.
I would suggest to always use a tool like Panasonic's SD Formatter when formating any kind of SD card. You can get it here: http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
-Valynor
Valynor said:
It is NOT recommended to use the MS Windows Format command to re-format any SDHC card - it will format them, of course, but with the wrong cluster size, slowing access speed down and possibly causing other problems.
I would suggest to always use a tool like Panasonic's SD Formatter when formating any kind of SD card. You can get it here: http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
-Valynor
Click to expand...
Click to collapse
Also good to know, but does it also prevent or solve that EncFiltLog problem?
Is there no registry tweak to turn off or delete that W 6.1 encryption option anyway?
luckyuser said:
Also good to know, but does it also prevent or solve that EncFiltLog problem?
Is there no registry tweak to turn off or delete that W 6.1 encryption option anyway?
Click to expand...
Click to collapse
No as far as I know.
Will creating a read-only, hidden folder called "EncFltLog.menc" on the card prevent this problem?
Phil_123 said:
Will creating a read-only, hidden folder called "EncFltLog.menc" on the card prevent this problem?
Click to expand...
Click to collapse
What do you mean?How do you do?
HI folks, glad to find some peeps who are suffering from the same problem...
The solution here seems not to work for me, as I hard-reset my TouchHD before I found out about that encryption ****up...
Is there any solution that allows you to reformat the card?
Not to mention that I NEVER touched that damn encryption option as I really never trust M$ that far with my data... seems it got me Pwned anyways...
Anyone ever tried to Write M$, tell them what a bunch of wacky Ho's they are and demand a new miniSD Card from them?
sorry for my language but atm I mad as hell as I just lost a 8GB and a 16GB sanDisk...
I experienced a lot of bc during all the yaers messing with M$ stuff but this ****up ins unbelievable...
I had the same problem with my 8gb sandisk.
I would like to add that I was able to retrieve most of my files from the memory card using EASEUS Data Recovery Wizard Professional. You need to do the data recovery before attempting to reformat the card.
Hi guys sorry for messing around in your forum but this post is the closest solution to my problem. I cannot format or save anything to my 16gb sandisk card because of that bloody encryption file. Now the problem is that I'm a Kaiser user and I do not have disk mode in my phone, so has anyone successfully formatted their card without using disk mode?
one very quik question. Does this fix the problem for good? you can use the sdhc card with the phone or will it always end up with menc file?
card unreadable in one night
Yesterday, my sdhc 8gb card was working properly but in just one night something happened to it. In the morning, I came to know that it is not more being recognized by htc hd2. Every time I soft reset or hard reset the phone a message come up saying "Do you want to format this storage card to make it readable? this will permanently delete any files on the card." when I click no nothing happens and phone keeps on working and if I click yes then the card is formatted in just 1 second. I tried formatting the card myself from phone format tool (there is format card tool in tools section of the phone) but it is showing only 30.61 mb instead of 8gb.
After reading this thread, I think the problem is with EncFiltLog. Actually I backup my phone and card yesterday with sprite backup. I also backup EncFiltLog on my pc. Now after hard resetting the phone I delete the newly created EncFiltLog file by the fresh WM 6.5 installation after hard reset. I deleted that file from my pc by using the phone card storage as disk drive instead of activesync and simply shift+delete the file from removable storage in My computer. After that I copied all the phone card backup (including EncFiltLog - old one) on the freshly hard reset phone. Now all of sudden in just one night phone sdhc card is not able to recognized by phone.
Moral of the story: Never backup EncFiltLog. Keep the newly created EncFiltLog file by wm 6.5 after hard reset and copy your all files and folder from card backup to phone card (excluding EncFiltLog) after a hard reset. Don't ever overwrite the newly created EncFiltLog.menc file with old one from backup.
Reason: I think WM 6.5 pairs the newly created EncFiltLog with its some key on phone internal storage. Remember how encryption works? I am talking about public key and private key pairing. I think WM6.5 pairs one key stored in EncFiltLog with another key stored inside the phone interal storage which is itself freshly created after the hard reset but when we copy the old EncFiltLog from storage card backup to freshly hard reset phone storage card, those key pairs won't match anymore and windows mobile 6.5 simply locks up the card.
it is my own opinion.
One more clue
Ok guys, I've got one more clue after googling and reading other threads on this forum. May be HTC is supplying fake 8gb sdhc card with hd2.
I've came on that conclusion because yesterday there was more than 5 gb space left on my phone storage card. In the night RSS Hub software has updated all the feeds and stored those feeds on storage card (I've set feeds to be stored on storage card). I think something has been gone wrong there. May be the actual capacity of this fake storage cards in far less than what is written/claimed on the card (i.e. 8gb). In the night as soon as the RSS Hub stored feed on the card, it somehow corrupted the card FAT writting its data on sectors of the card where it should not be.
Hence the card is corrupted now just showing 30.61 mb instead of 8gb. There exists no solution for this situtation till now. I've sent mail to HTC regarding this on their customer support page. Let's see what would happen now. I suspect either HTC or my dealer would say that the storage card don't come under warranty. Let's see now. I will update the thread soon.
My problem is the same.....
after HSPL I faced "Do you want to format this storage card to make it readable?..." and after that I lost my mSD.
Format Storage Card didn't worked. it shows 30.61MB , Cluster Size: 0KB
also Clear Storage didn't worked...
System > Memory > Storage Card > Total storage card memory: Not installed
Is there any other way to fix this problem? because of my country, it is difficult to use HTC Service...
Hey guys,
anyone having problems with their microsd card not showing in file explorer?
I'm using a SanDisk Microsd and it was working fine then disappeared.
It has been installed properly and WAS working.
I know its not the card as I have tried the card in a HTC Hero and it works fine. Also tried a 2gb microsd and it does not get recognised after disappearing from file explorer.
I have tried uninstalling programs to see if its a certain cab causing this but no luck. I have found that doing a hard reset restores the microsd in file explorer.
So far two hard resets have restored it but it seems to keep disappearing!!
Did you try another sd card?
It might be just card problem, if not....
[email protected] said:
Did you try another sd card?
It might be just card problem, if not....
Click to expand...
Click to collapse
Yeah tried a 2gb card that came with the HD2 but no luck
I mean it works after I hard reset but once it disappears HD2 won't recognise when I swap to a 2GB card.
Is this a bug? I don't think its a hardware issue as it shows when I hard reset.
Is your HD2 connected to the USB cable and PC when looking?
If so. Try again without the connection.
I thought I had a similar issue at first with mine - turns out, if I remove and re-insert the SD card - then open explorer and have it as high level view as poss (My Device) - Storage Card folder isn't there.....but then I scrolled to the bottom of the folder tree - and for some reason, once it's removed and re-inserted, the first time you use the explorer, it places that folder at the bottom (so off the screen) but it was there for me [once you've used explorer once and dont remove/re-insert card, it places the storage card folder back up the folder tree in usual place] - sounds like you have a more serious issue though if you've checked that and it's not even there.
htc-hd2 said:
Is your HD2 connected to the USB cable and PC when looking?
If so. Try again without the connection.
Click to expand...
Click to collapse
No not connnected to USB.
I just did another hard reset and it shows again. I installed a couple of cabs (Touch X Task Manager, tnyynt SD Tuneup) and everything is working fine. I then decided to do a soft reset and it disappeared again.
EDIT: I actually just uninstalled tnyynt SD Tuneup and did soft reset and microsd reappears in file explorer...hmm will have to investigate further.
you have to hard-reset.
I have the same problem when installing the coreplayer...then my storage card disappears. It seems like a driver or something gets deleted or messed up.
hard-reset and you will be fine.
also don't forget to format your SD card once...I forgot this too...maybe that helps too.
[email protected] said:
you have to hard-reset.
I have the same problem when installing the coreplayer...then my storage card disappears. It seems like a driver or something gets deleted or messed up.
hard-reset and you will be fine.
also don't forget to format your SD card once...I forgot this too...maybe that helps too.
Click to expand...
Click to collapse
I have hard reset but that is obviously not a permanent solution. It is not because of Coreplayer.
I have been using since uninstalling SD Tuneup and soft reset. Working fine for now so I assume it had something to do with using SD Tuneup with leo or wm6.5? Anyway will report back if any more dramas.
I can't find my SD card either seems that i have the same problem as you.. wtf to do??? have formated, an everything i know..
mooooooa said:
I can't find my SD card either seems that i have the same problem as you.. wtf to do??? have formated, an everything i know..
Click to expand...
Click to collapse
when did it stop working? does it appear after a hard reset?
Mine seemed to be associated with software I installed (namely tynnnt SD Tuneup). After I uninstalled it and did a soft reset it reappeared in file explorer...
motlking said:
No not connnected to USB.
I just did another hard reset and it shows again. I installed a couple of cabs (Touch X Task Manager, tnyynt SD Tuneup) and everything is working fine. I then decided to do a soft reset and it disappeared again.
EDIT: I actually just uninstalled tnyynt SD Tuneup and did soft reset and microsd reappears in file explorer...hmm will have to investigate further.
Click to expand...
Click to collapse
SD tuneup isn't designed for the qualcomm ..
the SD drivers are totally different on the Leo..
fards said:
SD tuneup isn't designed for the qualcomm ..
the SD drivers are totally different on the Leo..
Click to expand...
Click to collapse
Cheers for confirming that. I used it on my original Touch Pro and also on the Xperia X1 so I assumed it would work on the HD2, I assumed wrong! haha
motlking said:
when did it stop working? does it appear after a hard reset?
Mine seemed to be associated with software I installed (namely tynnnt SD Tuneup). After I uninstalled it and did a soft reset it reappeared in file explorer...
Click to expand...
Click to collapse
I installed tynnnt SD Tuneup in the beginning. Had a little bit probs with SD card in the beginning also, but yesterday when I moved some garmin maps over to the Sd card, it began stop working. performed a hard reset today and it's working again, but i would not install SD tuneup again this time
Hi all,
This always happened to me. In winmobile 6 and now 6.5. For some reasons since yesterday apps which installed to my storage card disconnected it's link or short cuts in the start menu. Now all of the apps in my storage card i can't access from start menu. when i clicked the app icon in my start menu my HD2 responded
"Cant open XXX. File is not registered or not trusted in digital signature, or can't find one of the files elements. Please resintall or restore this file."
I have to go to the file directory in my storage card to run the apps. This is very annoying and very inconivence. Anyone knows why? What's worse is that all of the new apps that i installed to my storage card has the same issue... Which means i can't no longer install apps to my storage card...
Help?
Use file explorer to find your chosen program icon /copy it
Still using file explorer go to device/windows/start menu/programs and paste shortcut using left hand bottom menu
Job done ! Rename it if you want !
DISREGARD THE LAST MADE AN ERROR !!
Use file explorer to find your chosen program icon /copy it
Still using file explorer go to device/windows/start menu/programs and paste shortcut using RIGHT hand bottom menu
Job done ! Rename it if you want !
if you go to file explorer can you read your sd card? I had the same issue and it was the sd card that failed so it could not read/find the program it was looking for. Try for kicks copying over some apps to a different storage card and retry. It will at least eliminate that possibility.
Yes, HD2 can read the SD card, and i have to go to the SD card location to run the apps. Just can not access from the start up menu...
InRBigness said:
if you go to file explorer can you read your sd card? I had the same issue and it was the sd card that failed so it could not read/find the program it was looking for. Try for kicks copying over some apps to a different storage card and retry. It will at least eliminate that possibility.
Click to expand...
Click to collapse
veryh2o said:
Yes, HD2 can read the SD card, and i have to go to the SD card location to run the apps. Just can not access from the start up menu...
Click to expand...
Click to collapse
So, install to phone mem instead and problem solved!
Anyone else can help? I think install to the main memory is not a very good idea.
pa49 said:
So, install to phone mem instead and problem solved!
Click to expand...
Click to collapse
I had the same problem you described. It happened after some old program I launched got the phone stuck and I had to pull the battery out to do a reset.
After the boot completed, I started to receive errors when trying to launch programs from the storage card. Uninstalling wouldn't work and reinstalling always failed.
Replacing the sd card didn't help either.
I believe that something corrupted the registry.
I finally gave up and hard reset.
The only good thing that came out of it was getting a new 16GB sd card for me to use.
My happened when i installed a lockscreen cab to my HD2 to the main memory. After that everything i installed to the storage card wont run from the startup menu.
Really? some dude told me to reformat my storage card. I'd rather do a hard resert cuz i have alot of crap in my 16G storage card.
I haven't gave up yet so i will still try to look for my other options... Thanks to know at least i am not the only one who encounter this fu**ing problem...
sg001 said:
I had the same problem you described. It happened after some old program I launched got the phone stuck and I had to pull the battery out to do a reset.
After the boot completed, I started to receive errors when trying to launch programs from the storage card. Uninstalling wouldn't work and reinstalling always failed.
Replacing the sd card didn't help either.
I believe that something corrupted the registry.
I finally gave up and hard reset.
The only good thing that came out of it was getting a new 16GB sd card for me to use.
Click to expand...
Click to collapse
help anyone? running out of options...
veryh2o said:
help anyone? running out of options...
Click to expand...
Click to collapse
Gave up and hard reset a couple of times, and i found out that the reason i can't click the icon in my start menu to access the apps which i installed in my storage card. It was because of i change the local and Text. I changed from Taiwan to USA and HD2 will not let me access the apps from start menu. This is very wierd, but if i change back to Region: Chinese Taiwan, then my HD2 is ok again... Just to share with you guys...
veryh2o said:
Anyone else can help? I think install to the main memory is not a very good idea.
Click to expand...
Click to collapse
Why is it not a good idea? Its what its there for so use it!
When I'm on "Documents" tab it says - "SD card is full or missing"
Any way around it ?
Come on ... nobody has this problem ?!!!
I had that problem too and I wish I could give you a way to fix it, but I had to perform a hard reset after WMWifiRouter screwed my WiFi up. Your post reminded me about the problem with the documents tab and I just checked it... turns out the hard reset also fixed this issue for me.
I'll let you know if it comes back and we can work out a fix that doesn't involve resetting everything on the phone.
I actually performed hard reset (because of a different issue). Unfortunately it did not fix Documents tab problem
are you using a ram disk at all? that is known to mess with the docs tab.
samsamuel said:
are you using a ram disk at all? that is known to mess with the docs tab.
Click to expand...
Click to collapse
I do not even know what is RAM disk on HD2. No, I do not use special RAM disk apps and my ROM is US T-Mobile HD2 stock ROM
bogdatov said:
I do not even know what is RAM disk on HD2. No, I do not use special RAM disk apps and my ROM is US T-Mobile HD2 stock ROM
Click to expand...
Click to collapse
hmm no clue then, sorry. Think if it were me i'd try copy off all the files and folders onto the pc then format the sd card and copy everything back, just to see.
Did you remove the original SD card that came with it? Or, replace it with another one? I know it's in the manual that once you do it, the SD card may not work anymore, or something like that. Maybe that's the cause, I'm just guessing since I don't have this kind of problem.
microSD card came with T-Mobile Hd2 (US version) already inserted. Did not touch it
I have this problem too with my Touch HD.
I can't read my documents. It says: "SD card is full or missing".
Any help. Please...
I've fixed this problem
I had this problem too
I've fixed this problem thus
I backed up all info the storage Card and I made a complete format the storage card complete under windows, after I copied all info into storage card again, and this operation fixed this problem
Dmonium
Excuse :me if my english is so bad
dmonium said:
I backed up all info the storage Card and I made a complete format the storage card complete under windows, after I copied all info into storage card again, and this operation fixed this problem
Click to expand...
Click to collapse
Did exactly same thing but it did not fix it for me
Format worked for me, although I'm pretty sure the SD card was fine, and was gonna compare the pre-format files to post-format and see if I accidentally deleted anything that would cause this. Was in a hurry though, and never ended up comparing.
Formatted(full) SD card on PC, then put in phone and formatted there to get the stock files back on. Then copied everything else over (TF movies, and my downloads, etc..). Worked fine after that.
Hi
I had the same problem and quicikly solved this issue:
Go to: \Carte de stockage or Storage card\Application Data\HTC\databases\DocExp
And delete 2 files: postlist.DB & value.DB
It worked for me, hope the same for you
Installing a network plugin caused the issue on mine, when I unistalled it worked again
mdean11 said:
Installing a network plugin caused the issue on mine, when I unistalled it worked again
Click to expand...
Click to collapse
mdean, do you happen to have the name or the cab handy, so I can take a peek at it for a possible connection to the cause? Thanks!
I tried 3 different ones, all caused the problem - generic network plugin, htc network plugin, and schnaps network plugin
SD Card is full or Missing - SOLVED
1. Delete the folder - Storage card\Application Data
2. Tab again the document tab - wait re-loading until finish searching all documents
3. Successful!
thanks dude i was having the same problem, when i enabled shared network folder in touch tool, it stop working but i went back and disabled it and now working again.
Glad you all figured it out... I had this problem 3 weeks ago and immediately after enabling and setting up the network plugin with Touch Tools 1.4. Luckily, I didn't have to look for the cause since the last thing I did was install & use the network plugin!
So, for future reference.........
Also, your facebook pictures in htc album's facebook tab will stop showing up if you manually assign a "CacheSize" value other than 0 to HKLM\System\StorageManager\FATFS.
Be advised!