Hi, trawling though the forum in hope for getting a 2.1 Sense ROM working on my phone (which i have been attempting for the last 48hrs) i came across a post that has wrong information on it, which i didn't notice till it was too late.
the phone is now showing as a Sapphire PVT 32A ENG S-OFF H with radio 6.35.10.18
rest is same as before
before it was
Phone is 32B UK Vodafone
Sapphire PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (Sapphire)
CPLD-10
Radio-3.22.20.17
It will not load into recovery but does allow me to get to fastboot and HBoot, the problem is it will not extract Hboot files (saphh.nbg or what ever its called)
IMO all i need is a 32B Radio img to flash with Fastboot as i did before, any ideas???
Ash
So is this bricked now???
Do you have debug mode on your phone? if so you may be able to recover using android SDK.
I know of ppl and posts suggesting it is possible to put a 32A rom on a 32B with some performance losses.
take a look at here:
http://forum.xda-developers.com/showthread.php?t=547133
Some reason my Goldcard became normal and will no longer work when i Hex edit the card, its a Kingston 2Gb, any ideas??
when it was working i couldnt get it to flash anything, kept getting verification errors when i tried to flash anything to the phone.
so basically i think its completely dead,
am open to ideas how to brick the phone more so to make the ROM unreadable so i can get it replaced
if there arent any performance problems then dont worry, you can "push" or "fastboot" your radio, do a search for "radio installation" and u will find what u need
apnemesis said:
Hi, trawling though the forum in hope for getting a 2.1 Sense ROM working on my phone (which i have been attempting for the last 48hrs) i came across a post that has wrong information on it, which i didn't notice till it was too late.
the phone is now showing as a Sapphire PVT 32A ENG S-OFF H with radio 6.35.10.18
rest is same as before
before it was
Phone is 32B UK Vodafone
Sapphire PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (Sapphire)
CPLD-10
Radio-3.22.20.17
It will not load into recovery but does allow me to get to fastboot and HBoot, the problem is it will not extract Hboot files (saphh.nbg or what ever its called)
IMO all i need is a 32B Radio img to flash with Fastboot as i did before, any ideas???
Ash
Click to expand...
Click to collapse
Not sure if this has been answered, but I thought I'd help. Put the 32B radio image in the "AndroidSDK" directory on your computer. Start phone is Fastboot, then connect via USB. In command prompt, confirm device is ready with "fastboot devices", if you see your device listed you are good to go. Then type "fastboot erase radio". Once completed, type "fastboot flash radio XXXXX.img" (Where XXXXX is the name of the radio image, for example: "radio.img") for the radio image, go to developer.htc.com/adp.html . Find the "Android 1.6" "Radio Image" "ota-radio-2_22_19_26I.zip", Extract the "radio.img" from that zip file. Let me know if that helps. I'll check up later if you need further instruction.
braedenws said:
Not sure if this has been answered, but I thought I'd help. Put the 32B radio image in the "AndroidSDK" directory on your computer. Start phone is Fastboot, then connect via USB. In command prompt, confirm device is ready with "fastboot devices", if you see your device listed you are good to go. Then type "fastboot erase radio". Once completed, type "fastboot flash radio XXXXX.img" (Where XXXXX is the name of the radio image, for example: "radio.img") for the radio image, go to developer.htc.com/adp.html . Find the "Android 1.6" "Radio Image" "ota-radio-2_22_19_26I.zip", Extract the "radio.img" from that zip file. Let me know if that helps. I'll check up later if you need further instruction.
Click to expand...
Click to collapse
I have done this and I get Failed (remote: signaure verify fail) when applying the radio.img.
I have downloaded it from HTC image like 10 times and each time i get the same thing. Thoguths?
Hi, finally back to trying to get the phone working again, have bene using an old phone and some reason my emails from this site was being blocked and didn't get anything saying i had new posts (be it from some time ago)
I have tried everything,
i am getting the same responce from fastboot
C:\android\tools>fastboot flash radio radio.img
sending 'radio' (21504 KB)... OKAY
writing 'radio'... INFOsignature checking...
FAILED (remote: signature verify fail)
i have also tried many different micro SD cards and cant get any of them to work as gold cards, they just ask to be formatted all the time by the computer
so any ideas?
i have managed to create a working goldcard (after purchasing my 5th sdcard) but i get "Main Version is older" when i try and flash any ROM onto it.
still looking for a fix any ideas?
i have just noticed the phone is now showing
Sapphire PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-10
RADIO-6.35.10.18
May 8 2009,21:02:32
can anyone help?
have now spent about the last 2 weeks trying to sort this, googled everything i can think to / find on the forum and still no avail
1.Turn your phone off. Turn it on by holding Back and Power, or Vol. down and Power. Either way, boot into the bootloader.
You should see the three Androids on skateboards, and the menu title should say "Fastboot".
2.Connect your device to the computer. The display on your phone should now say "Fastboot USB".
3.Open up the shell/terminal on your computer, and type
fastboot devices [enter]Your device should be listed with it's serial number, and should say "fastboot".
4.Change directory to where you have saved your recovery image. I.e. type "cd /path/to/recovery.img in windows prompt, press enter.
5.You may issue a "dir" command (Windows) or "ls" (Unix/Linux) to make sure you are at the right directory, or just skip this step.
6.Type
fastboot flash recovery recovery.img
Perhaps?
doesnt work just freezes on load and tried both H and G versions
Bump?...i'm stuck on the same problem :/
Related
Hey guys
I'm so desperate and you are my last hope. I was looking for hours in several forums but didn't find any solution.
What I did:
I updated the phone to 6.35 Radio and 1.76.2007 SPL and installed a Eclair ROM. Everything went well until I installed ROM Manager app. Then I installed Cyanogen mod through ROM Manager and since then nothing works!
What's the problem:
When I switch phone on it sticks on the HTC boot screen and nothing happens.
I can go to fastboot mode but ADB doesn't recognize my phone.
I also can go to recovery mode and ADB sees the device but I cannot install any image and I cannot choose any item from the menu.
What I tried:
connect with fastboot usb: phone isn't recognized
flash via fastboot in recovery mode: <waiting for device> no response.
Install a sappimg.nbh from sdcard: Fail! main version is older.
My version:
SAPPHIRE PVT 32A SHIP S-ON G (why G??? isn't that the 32B version?)
HBOOT-1.33.0013 (SAPP10000)
RADIO-6.35.10.18
Thank you very much for your help!
LOL, I almost started cracking up. "Help me, you are my only hope" (Star Wars)
Anyhow.
Start over. Download the stock Rom, radio and spl for your MT3G. I ran into something similar with mine. I had to erase system from the CLI (command line) fastboot and wipe the phone. Then used the stock sappimg.img to get mine functioning again.
This will "Unroot" your phone
I had to plug the phone in via usb. Go to terminal or dos, and fastboot.
fastboot erase system -w
fastboot erase boot
fastboot flash boot boot.img
from there I turned the phone off, and then I copied sappimg.img to the memcard, and then booted using the vol down + power and let it install the factory rom, radio, spl and recovery.
Or you also stated that you have yours rooted. You're going to have to download the original radio, and rename it to radio.img and then flash it over using fastboot. (fastboot flash radio radio.img). This would get you to the original radio. Then I would revert back to the original ROM w/root ROM.
This worked for me. Im hoping that someone else will chime in and say if this is the correct method to use. Im not an expert. I did this at my own risk.
Someone else want to chime in?
Thanks for your help!
I wasn't conscious that I cited a Star Wars quotation :-D
First I tried to follow your steps but without succes. When I run "fastboot erase system -w" it says: remote not allow. It seems my phone isn't rooted anymore.
Also the command "fastboot flash radio radio.img" doesn't work.
Where can I get the stock ROM? Is there a possibility to extract these files from the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe tool?
Nevertheless I keep going on although I'm a little bit tired of this issue. However, it's my mistake.
The reason why I wanted to flash my device was because I was sick of this old, boring and lame Android 1.5. Why isn't HTC getting ahead and supplies us more up to date software? An ambitious single programmer is able to provide Android 2.1 but HTC with its high-paid engineer team isn't. That's weird!
It looks like you have to put on one of the engineering SPL's first in-order to wipe the device. By the way, mine is a 32A board, and has "G" also. Weird I know.
I believe the RUU ROMS are stock. So flashing these to the phone should unroot your phone. There is a list of all the RUU ROMS and guides here:
http://forum.xda-developers.com/showthread.php?t=659403
or
http://forum.xda-developers.com/showthread.php?t=682243
These are great sources of information. I'm not an absolute expert, more of a novice. I'm new to the AC but, reading guides and such, you should get your answer and you can try a few things (within reason).
BTW, when you said that fastboot flash radio radio.img doesn't work, have you downloaded the stock radio and spl and copied them to the AndroidSDK\Tools folder? That's probably the reason it isn't working. You have to have the SDK downloaded and installed. (Read The Guides provided to help you) "Use the Force!" HAHA!
So I tried many different ways to save my htc. But by now no success!
As I described I can go into fastboot but I cannot run any commands (remote not allow). I haven't root anymore!
When I go to recovery mode it sticks. I cannot choose any item from the menu.
The only way to get the phone working is via the sdcard. It's possible to install a sappimg.zip but it says: "Fail! Main version is older!" So i have no chance to downgrade. I need a sappimg that has a higher version than my current one.
Also rooting seems not to be possible due to I have to access recovery mode (which isn't working).
Finally, the only way I see at the moment is trying some stuff that works only via the sdcard.
Thank you guys
If you are getting that sort of error that indicates that you have not created a correct goldcard. You need to have that in order to flash these devices.
Go to theunlockr.com and read that tutorial about how to create one. Or click here:
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
Are you really sure that`s because of a wrong goldcard? I´ve tried 2 different sdcards several times but every time with the same error (Main version is odler).
No further ideas?
I can't do anything. recovery mode always crashes, no root access, goldcard doesn't work.
Finally I'm back on Android!
I could solve my problem. I found a sappimg.zip (http://rapidshare.com/files/266290371/sappimg.zip) that turned my phone to:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
RADIO-6.35.10.18
After that, I was able to flash trough the _HTC Magic_RUU_Sapphire_HTC_Europe_2.20.401.2_HTC_CH_release_signed_NoDriver.exe.
Now I'm running on a stock ROM
madboy87 said:
Finally I'm back on Android!
I could solve my problem. I found a sappimg.zip (http://rapidshare.com/files/266290371/sappimg.zip) that turned my phone to:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
RADIO-6.35.10.18
After that, I was able to flash trough the _HTC Magic_RUU_Sapphire_HTC_Europe_2.20.401.2_HTC_CH_release_signed_NoDriver.exe.
Now I'm running on a stock ROM
Click to expand...
Click to collapse
Good to hear.
I'll take the liberty of modifying the title of your original post and close this if you will no longer be needing any assistance. Should you or anyone else decide to need it re-opened, just send me a pm. Thanks!
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006 (SAPP50000)
CPLD-12
RADIO-2.22.23.02
I flashed the 2.22.23.02 through fastboot by mistake and now I can't get into recovery mode, or flash any other radios onto the phone. The fastboot menu is the only thing I can get to on the phone.
I tried reflashing the 2.22.23.02 again but it won't go through...
Anyone have any ideas on what I can do to unbrick it?
Edit: Tried sappimg.nbh via volume down and power button but i get a Model ID error. Now i can't fastboot anything over to my phone.
Edit: Flashed the sappimg.nbh, sappimg 2.16.707.3, sappimg 2.53.707.2, via gold card but I now get the error: Main Version is older!
I have answered similar questions before...
Use the search function.
But to get you started here is a quick solution.
1) flash eng spl that starts with 1.33.20XX where XX can be 05,09 or 10.
Restart into fastboot.
2) flash the right spl/radio/recovery combo.
This is confirmed to work....
Next time post ALL fastboot info... there are some info mission in your post!
all the fastboot info...
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006 (SAPP50000)
CPLD-12
RADIO-2.22.23.02
I have just tried flashing hboot-1.33.2010 via fastboot.
However, I get the error message:
sending 'hboot' (512 KB)... FAILED (remote: not allow)
do this:
----- If you boot into fastboot and have issues with "fastboot:remote not allow", then your SPL won't work. Upgrade to Engineering SPL before continuing.
----- If you do not have an Engineering SPL, download 1.33.2010 and flash through recovery before starting this procedure. Flash the SPL update.zip like any other update.zip file.
in http://forum.xda-developers.com/showthread.php?t=605239
Unfortunately... I can't boot into recovery either, nor can i push a recovery image to the phone. I get the same error: "fastboot:remote not allow".
ok... you are very limited...
Do this:
Find a suitable sappimg.nbh... Not sappimg.zip...
Use this which i just uploaded for you:
http://rapidshare.com/files/421772202/SAPPIMG.nbh
Using your goldcard flash the sappimg.nbh in fastboot.
The sappimg.nbh does not need any unzipping... it's a complete img of the nand and overwrites everything.
I can't seem to find the answer to this anywhere....
is there a way to create a goldcard at this point for me?
I can't get into debug mode on the phone (for obvious reasons) and therefore can't do adb....
Find ANY android device and make a goldcard...
Then use the goldcard on your device...
wouldn't suppose anyone have the goldcard.img from their email that they could send me...
1)Download the -G magic RA recovery
2) rename it to recoveryG.img
3) run 'fastboot boot recoveryG.img' (with the phone in fastboot mode)
4) allow recovery to boot then run the following adb commands
Code:
adb push recoveryG.img /tmp/recoveryG.img
adb flash_image recovery /tmp/recoveryG.img
5) Now power down the phone
6) boot into recovery by holding home+power
10) flash 1.33.2009 or 1.33.2010
Now you will have fastboot again
Most likely you will want to find and flash via fastboot radio 3.22.20.17 if you are not a Rogers/Fido customer or have signed the e911 wavier, otherwise you want 3.22.26.17..
After flashing the 3.x radio flash RA -h recovery via fastboot (and while in fastboot run 'fastboot erase system -w'); this will let you flash the ebi1 rom of choice
I just downloaded the recovery-RA-sapphire-v1.7.0G.img
renamed it so recoveryG.img.
When i try to run the command: fastboot boot recoveryG.img
I get the error message:
downloading 'boot.img'...FAILED (remote: not allow)
Then its best to just install the official e911 ruu from rogers and re-root
I have tried that, but it doesn't work...
What's your fastboot info?
Sent from my HTC Magic using XDA App
isn't the info on my first post the fastboot info?
bigbrotherbear said:
isn't the info on my first post the fastboot info?
Click to expand...
Click to collapse
Yes, I'm also not sure why people are ignoring that fact that you can't use fastboot either :-S
My bad, using my phone and completely missed the first page.
EDIT: I think mum was on the right track. Your going to need a goldcard. No one will be able to send you their .img because its SD card specific. You don't know anyone with a Android based phone?
Sent from my HTC Magic using XDA App
Looks like i'm getting progress....?
I have a gold card now thanks to my friend, however...
when I try to flash the SAPPIMG.nbh I get a Main Version is older!
I also tried the 2.53.707.2 SAPPIMG.zip and I still get this error.
I also just tried 2.16.707.3 SAPPIMG.zip and I still get this error.
YOU ARE STILL MAKING THE GOLDCARD THE WRONG WAY...
You should not get that error msg...
Try to remake the goldcard.
Did it on two different SD cards, the same way I did it before to get my phone off perfected SPL... not sure what I could've done to do it wrong this time around.....
a mmc CID can't change right?
followed this guide:
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
i think i brick my phone...how when i power on,it only keeps on boot into htc magic...so is there any think i can do or?
Please can you provide more info.
It's like going to the doctor and saying the you feel pain and nothing else!
Do you have fastboot access?
Do you have recovery access?
What did you do before you phone went dead?
What model, radio,spl and rom do you have?
mumilover said:
Please can you provide more info.
It's like going to the doctor and saying the you feel pain and nothing else!
Do you have fastboot access?
Do you have recovery access?
What did you do before you phone went dead?
What model, radio,spl and rom do you have?
Click to expand...
Click to collapse
i dont have a fasboot & recovery access...
i root my phone with universal androot,using rom manager i successfully flash recovery,then i download rom..i kinda like want to look around the rom manager app and i accidentally press ok with the backup & clear cache?the phone start to restart and now i cant turn on my phone
my phone is...
HTC magic 32a s-on
hboot 1.76.0007
radio 6.35.07.29
its because of the perfected spl right?
From what I can see,with my limited experience, either you left out a part after "s-on", or your phone thinks its neither HTC nor google.
It should say S-ON H
And I dont think that 0007 is perfected.
But I'm a noob and would wait for mumilover to respond...
ekie84 said:
HTC magic 32a s-on
hboot 1.76.0007
radio 6.35.07.29
Click to expand...
Click to collapse
I want ALL fastboot info.
How did you get this info....
I don't believe that rom-manager has the power to **** up your fastboot.
Recovery and system, maybe - but not fastboot.
When you hold back-button and power-button together what do you see?
Write it down here or take a picture or what ever...
Can you see fastboot?
If you can't see anything beside flash screen then i can't help you!
TheBladeofFate said:
From what I can see,with my limited experience, either you left out a part after "s-on", or your phone thinks its neither HTC nor google.
It should say S-ON H
And I dont think that 0007 is perfected.
But I'm a noob and would wait for mumilover to respond...
Click to expand...
Click to collapse
yes it say s-on H
mumilover said:
I want ALL fastboot info.
How did you get this info....
I don't believe that rom-manager has the power to **** up your fastboot.
Recovery and system, maybe - but not fastboot.
When you hold back-button and power-button together what do you see?
Write it down here or take a picture or what ever...
Can you see fastboot?
If you can't see anything beside flash screen then i can't help you!
Click to expand...
Click to collapse
when i hold back+power (recovery) & hold menu+power (fastboot) nothing happen...all i can see is the "htc magic"
its ok then...i've email the service centre & their say if they can reflash the rom successfully their will charge me rm80
Similar Issue
Hey Guys and Girls,
This is my first time posting on this site. I have run into a similar issue and have attempted to post on numerous sites without having any luck solving the problem.
The quick version: I ran z4root to root my phone; it said successful. I then installed Rom Manager and switched my recovery to Clockwork (the most recent one). Next I downloaded the latest CM6 from the Rom Manager with GApps. After having unsuccessful attempts at backing up and wiping first, I decided to try installing the Rom without backing up or wiping data. The Rom install worked this time (I got installation successful). However, when the phone rebooted itself, it never got past the Rogers screen. It is now in a constant state of rebooting until I pull the battery.
I can get to fastboot, but cannot get to the recovery screen. My HTC Magic 32A specs from the fastboot menu are:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAP50000)
CPLD-12
RADIO-6.35.16.19
Some other info that may help:
-my PC recognizes my phone (I have been trying the Radio Switcher v.GUI 4.1 and it says the phone is connected) but it is not allowing me to flash anything.
-When I try "adb devices" it gives error: no device attached but "fastboot devices" gives me a number.
-I have tried putting "recovery-RA-sapphire-v1.7.0H" on my sdcard, but the HBoot says no image or wrong image
-The Radio Switcher v.GUI 4.1 says my phone is not rooted
-I tried the goldcard method of rooting, but because I can't get the phone to recognize the sdcard, I can't get a proper CID for the goldcard creator
Hopefully I've provided enough info to get some help. I am waiting patiently, but am starting to get sick of the old Sony Ericsson Anything helps!
Run this 2 commands in fastboot and post here the ourput.
Code:
fastboot oem h
fastboot getvar version-main
Here is the info you required.
C:\AndroidSDK\platform-tools>fastboot oem h
... INFOcommand list
INFOkeytest
INFOheap
INFOboot
INFOreset
INFOpowerdown
INFOrebootRUU
INFOtask
INFOenableqxdm
INFOrtask
OKAY [ 0.009s]
finished. total time: 0.009s
C:\AndroidSDK\platform-tools>fastboot getvar version-main
version-main: 3.54.631.3
finished. total time: 0.001s
run this command to activate the sdcard:
Code:
fastboot oem enableqxdm 1
You have to make a goldcard... if you can't make it using your device, then do it using any other android device.
When you have made the goldcard come back here, and i'll guide through the rest :0)
Done. I made a gold card previously...hopefully it still works. Once it's made into a goldcard, is it always a goldcard?
Actually... re-checking your info - you don't need a goldcard..
No need for sdcard either...
Download this sappimg.zip :
http://rapidshare.com/files/437924840/sappimg.zip
Then run this command from a command prompt:
Code:
fastboot flash zip sappimg.zip
Make sure that the sappimg.img is in the same folder as fastboot.exe
The sappimg.zip is the newest rogers update... the same version as you currently have...
No need for goldcard or anything :0)
if you get any troubles, then post here the outcome of the command prompt..
When all is done, you should be back on stock 2.1...
From there you follow my guide (check my signature) to root and get custom recovery.
Good luck
hi guys,
i got the same problem, here im my country nobody knows how to solve (im from brazil)
when a tryed to updade with sapping file, in the radio part, the screen became dark, then white.
now I can get to fastboot, but cannot get to the recovery screen. My HTC Magic 32A specs from the fastboot menu are:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.008 (SAP60000)
CPLD-12
RADIO-3.22.20.17
my PC recognizes my phone but it is not allowing me to flash anything.
When I try "adb devices" it gives error: no device attached but fastboot command works fine.
i have my first goldcard.
this forum is my last hope... if anyone know how to proced, help me pls
I had the same problem as a few of you and after trying everything I eventually decided to try installing SAPPIMG.zip from hboot and it worked fine. Took me a while to find the correct SAPPIMG but you should be able to find it on the forums here. You have to put the SAPPIMG.zip on the root of your SD card from your computer, put it in the phone, boot into fastboot and go into hboot and it'll load the SAPPIMG file. If you have the wrong SAPPIMG it'll usually give you an error when trying to install it'll say someting like update failed or wrong device ID. It took me about 4-5 different SAPPIMG to find the correct one for my phone.
Hey,
This is the info from my command prompt:
C:\AndroidSDK\platform-tools>fastboot flash zip sappimg.zip
sending 'zip' (110447 KB)... FAILED (remote: not allow)
finished. total time: 0.002s
The phone starts the box with the arrow and then after a few seconds it shutdowns
Dear Mumi,
Dear All Please help me...
my htc magic white before flashed is :
RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_ NoDriver
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jun 2 2009, 17:28:28
Root build RA-sapphire-v1.6.2H
After Flashing and update both of radio and SPL
RUU_Sapphire_HTC_Asia_WWE_3.03.728.4_SEA_release_s igned_NoDriver
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0007 (SAPP10000)
CPLD-12
RADIO-6.35.07.29
Aug 4 2009, 19:43:30
At the time My HTC Magic is working, but I can't root and also in the ROM it self missing android market.
then installed Universal androd and working...Last night i just tried to factory reset and The phone starts the box with the arrow and then after a few seconds it shutdowns, any idea to get in fastboot or just make HTC start normally
Thank in advance
cj.smith14 said:
Hey,
This is the info from my command prompt:
C:\AndroidSDK\platform-tools>fastboot flash zip sappimg.zip
sending 'zip' (110447 KB)... FAILED (remote: not allow)
finished. total time: 0.002s
Click to expand...
Click to collapse
Hmm... try this:
Code:
fastboot oem rebootRUU
The above will set the device into RUU mode.
Then download the official rogers RUU..
Run it and it should install just fine... no need for goldcard or sdcard..
I hope this will work.
atrix.suhendra said:
....
Click to expand...
Click to collapse
fastlan said:
.....
Click to expand...
Click to collapse
Please start your own thread or else the OP will loose his opportunity to get proper help!
I will try to help where i can :0)
Hey,
I just wanted to say I appreciate all the time you are putting in to helping me. I just did the RUU install, but once it gets to the updating signature part I get:
ERROR [132]: SIGNATURE ERROR
The ROM Update Utility cannot update your android phone.
So, I've got a MT3G that is apparently bricked. My buddy tried flashing a CM6 ROM and didn't root it properly - I'm assuming anyway since it's still S-ON. It powers up, gets to the CM Andy on a skateboard and gets stuck in a loop there.
I can get into SPL but that's it. I've attempted to erase the recovery and flash a new one with no luck. I can get it recognized via ADB with [ fastboot devices ], but I'm not sure that helps me much.
Any ideas on how to fix this? I don't mind the work, just need to find a way to get it past this point. If I can somehow manage to get it rooted from here, then flash a recovery so I can a ROM, that'd be awesome. Here's everything from the SPL screen:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT 1.33.0006 (SAPP30000)
CPLD-10
RADIO 2.22.19.261
May 27, 2009, 19:06:41
DJ_Caibel said:
So, I've got a MT3G that is apparently bricked. My buddy tried flashing a CM6 ROM and didn't root it properly - I'm assuming anyway since it's still S-ON. It powers up, gets to the CM Andy on a skateboard and gets stuck in a loop there.
I can get into SPL but that's it. I've attempted to erase the recovery and flash a new one with no luck. I can get it recognized via ADB with [ fastboot devices ], but I'm not sure that helps me much.
Any ideas on how to fix this? I don't mind the work, just need to find a way to get it past this point. If I can somehow manage to get it rooted from here, then flash a recovery so I can a ROM, that'd be awesome. Here's everything from the SPL screen:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT 1.33.0006 (SAPP30000)
CPLD-10
RADIO 2.22.19.261
May 27, 2009, 19:06:41
Click to expand...
Click to collapse
Hi!
You're not recognized via ADB if you type [ fastboot devices ] and it gives you your phones S/N. You can be at FASTBOOT, HBOOT or RUU. To be recognized in ADB you have to boot in to RECOVERY or in to SYSTEM.
If you have working HBOOT (can boot to HBOOT with pressing VOLUME_DOWN+POWER), I suggest you to make a goldcard, download a stock rom for your MT3G (In FASTBOOT you can type [ fastboot getvar cid ], and the first 8 digits will tell you your phones CID number.). Extract the downloaded RUU and find the rom.zip (rom.nbh) file. Rename it to SAPPIMG.zip (SAPPIMG.nbh) and put it in the root of your goldcard.
Start up your phone with pressing VOLUME_DOWN+POWER.
If you get error about "Model ID" then your MicroSD is not a goldcard and you downloaded a "wrong" RUU ("Wrong" RUU (Phones CID not correct) can be good, if it is for MT3G like you have. Only you must create a working goldcard.).
If you get error "Main Version is older" then try to find newer RUU.
I hope, I helped you...
And then make the rooting with more care
Hi there,
i have a HTC Magic here. When starting up it get's stuck at the Vodafone screen. I can't enter the recovery-mode.
I'm able to enter hboot and fastboot - the screen shows the following:
Code:
*** UNLOCKED ***
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0014 (SAPP10000)
CPLD-10
RADIO-6.35.08.29
I thought 32A is H only, and 32B is G? :silly:
Code:
fastboot getvar version-main
version-main: 3.12.0.0
While in fastboot-usb-mode i can see the phone on my pc (i used the android-sdk-driver, now my phone shows up as "Android Bootloader Interface") with:
Code:
fastboot devices
MB2********* fastboot
but it doesn't show up here (while phone is in hboot-mode or fastboot-usb-mode):
Code:
adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
NBH-files on the sd-card are rejected with "Main version is older". Any command for flashing or booting with fastboot end up in "command error" or "remote: not allowed" or something like that.
Most recovery-tutorials say that i need adb and fastboot - but as i said adb doesn't work. Other tutorials say i need a NBH-file, but all of those are rejected with "Main version is older". I also tried some sappimg.zip-files, but the phone shows up an error-message for a very short time ("wrong zipped...", i'm not able to read that so fast).
I also got a goldcard, but this didn't change anything.
Code:
fastboot getvar cid
cid: VODAP102
Is there any help for me and my phone (step by step with needed files)? :laugh:
I've got the same problem. It's been almost a month now and still no luck.
Did your problem start when you unlocked your bootloader? That's when mine started.
It was the phone of a friend of mine and it already worked with some custom rom. But (if i understood right) he erased everything with fastboot.
I don't know if this is really version 32A, because "G" should always be with 32B. The other thing is that the phone is from Vodafone Germany, but in Germany there normally is no 32A - it's only 32B. That's why i don't really know which files to use for the phone.
Did you already make your goldcard? And if so, do you know if it's working?
I still have the goldcard I originally used to put cyonogenmod on my phone, but it's not working now. I bought a new sdcard and made a new goldcard but it won't work either.
try to remove the battery for 5 mins, when is removed click some times power button; reinsert battery and try to go in recovery.... i had same problem and i solved with this method
@ dante96: No, that's not working for me - still just get the Vodafone screen. I think that everything on the phone was erased and without recovery on it i won't be able to recovery-mode, am i right?
Yesterday something weird happened. I just tried a
Code:
fastboot reboot-bootloader
and i got a lot of output - about CID, SuperCID, device-number, partitions and whatever, but i hadn't the time to copy that or try other things.
I tried that command again later and just got "remote: not allowed". It seems like i missed a chance to recover the phone yesterday. :crying:
Ok, what i know right now:
My phone does take sappimg.zip after command:
Code:
fastboot oem lock
BUT:
My phone is not 32A as shown, it's 32B - i can't flash files for 32A because of "Lack of heap", so the files seem to be to big to unzip to RAM.
That's why i can't flash 3.54.527.6 BrightStar Brazil or 3.54.631.3 Rogers Canada to get it running.
For 32B there is only one official rom higher than 3.12.0.0:
3.12.531.1 T-Mobile USA FRG83D
Tried to flash this one, it's updating boot und bootloader but after unzipping radio the screen turns black and nothing happens - tried it 3 or 4 times right now.
This got me from:
Code:
*** UNLOCKED ***
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.00[COLOR="Red"]14[/COLOR] (SAPP10000)
CPLD-10
RADIO-6.35.08.29
to:
Code:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.00[COLOR="Red"]13[/COLOR] (SAPP10000)
CPLD-10
RADIO-6.35.08.29
And i know that my Goldcard is correct - with another SD-card i just get "wrong model id" with the sappimg.zip mentioned above (3.12.531.1 T-Mobile USA FRG83D).
Does anyone have an idea what to do next or why screen turns black?
Some of the official roms for 32A are splittet into one 10 MB and one 90 MB file (for example this one "RUU_Sapphire_Rogers_WWE_3.05.631.7_R_release_signed_NoDriver.exe"), i think i could flash those - BUT i can't find those files for 3.54.527.6 BrightStar Brazil or 3.54.631.3 Rogers Canada. Anyone does?
Can you get those files from the temp folder?
5[Strogino] said:
1. Run Ruu
2. Don't flash, but go to temp folder and search for rom.zip or nbh-file
3. Rename to SAPPIMG.ZIP (if zip) or SAPPIMG.NBH (if nbh).
4. Place file to root it sdcard. Exit from ruu.
5. Turn phone off, then turn on by pressing and holding volumedown + power
6. Phone will start into hboot-mode and search for rom. Then it will flash.
Click to expand...
Click to collapse
Check htcdev.com under the unlock bootloader section for files.
Got mine back to life.
I flashed SPL 1.76.0013 from htcdev.com (Vodafone generic) and tried to install "3.12.531.1 T-Mobile USA FRG83D" again. With this SPL he managed to flash the radio but aborted afterwards.
Back on 1.33.0013 i tried the same rom again, now he flashed all of it. The phone is working so far - now i have to try to get a non-perfect SPL on it and afterwards a custom rom...
Code:
sapphire pvt 32b ship s-on g
hboot-1.33.0013 (sapp10000)
cpld-10
radio-2.22.28.25
Was the Bootloader locked or unlocked when you got that to work?
I flashed the SPL from htcdev when it was locked. Then they sent me an unlock-token which i just tried, so it was unlocked afterwards.
But i think i had to lock it again with
Code:
fastboot oem lock
to let the phone take those sappimg.zip without error.
Now i'm stuck again - i want Cyanogenmod on the HTC. But i can't get a non-perfect SPL with update.zip on it (and also no engineering SPL), in recovery-mode it just says "E: Signature verification failed - installation aborted" - but those SPL are signed.
Looks like i have to read some more.
Did you rename the engineering SPL to sappimg.zip and try it in HBoot?
matzehtc said:
Now i'm stuck again - i want Cyanogenmod on the HTC. But i can't get a non-perfect SPL with update.zip on it (and also no engineering SPL), in recovery-mode it just says "E: Signature verification failed - installation aborted" - but those SPL are signed.
Click to expand...
Click to collapse
No, copied it to SD-card and renamed it to "update.zip". Then i bootet in Recovery-Mode with Home+Power and applied the update.zip from SD-card. This gave me the error from above.
I think the phone won't take it in hboot when it's renamed to sappimg.zip.
If you SPL is perfected you need to follow these instructions
1. Create a Goldcard.
2. Copy the required sappimg.nbh/zip to the Goldcard.
3. Boot your phone while holding the VOLUME-DOWN key.
4. Press the ACTION KEY (=trackball) to start the update.
5. Wait until the update completes and press the ACTION KEY (=trackball) to reboot your phone.
6. (Upgrade to the rooted ROM of your choice).
That didn't work, because my main-version was to high.
I rootet the phone with this tutorial and got the recovery on my phone.
Afterwards i installed an engineering SPL in recovery-mode. With this i got back to "1.91.162.1 Vodafone Germany DRC92".
I rootet the phone again with the tutorial above and installed Cyanogenmod.
Everything working fine! :angel:
Code:
sapphire unknown 32b ship s-on g
hboot-1.33.0007 (sapp10000)
cpld-10
radio-2.22.19.26I
Code:
fastboot getvar version-main
version-main: 1.91.162.1
Good to hear you got it working.
I got my mainver from 3.12.0.0 to 3.57.0.0 by getting the file from the temp folder but it didn't really help me.
I think the problem must be the goldcard. I'll try borrowing my Dad's phone this weekend and see if I can fix it.