I can't make WM5torage work.
There is error "can't switch to mass storage mode. 1f error. please make sure..."
1. All programs from RAM memory turned off
2. All programs and links to storage card turned off
3. At the end, all programs from storage card deleted
same error appears again...
I have 8GB micro SDHC card. Maybe this is the reason?
Related
my xda2 won't detect my sd 256mb storage card. It did for a while but now seems to have stopped. It will still detect my 128mb storage card. Why won't it work? It recognises that the expnasion slot is in use so how come the storage card can't be seen. There is no file to view in file explorer and again when synched it doesn't appear on the screen of my pc. But if I swop and put the 128mb card in that card appears. Weird?
No it is not weird! I think your 256 MB SD card is fried. To unsure it is not try accessing it on PC with a card reader.
Have had the same problem twice with a 256 MB SD card from sandisk.
Mark
Thanks, but what does 'fried' mean. It worked for a while. Are you suggesting it's overheated?
fried mean that it's dead, not going to work ever again,
broken .......
sometimes eletronics just die for no reason
to be sure you can try it in a sdcard reader for pc
or you can try storage tools or pocket mechanics
and see if you can format the card using them
or if some of their options can detect the card
Sorry but I don't have or know anyone with a card reader for these small cards. I'll just have to buy another card.
I wanted to install Lextionary software on my Jasjar's Storage card. But on running the installer file on the desktop, when I active sync, the device installation screen beigns, which asks, where would you like to install, on Main Memory or on Storage card memory. On selecting the Storage card , the error message says, " Space unavailable" though I have full 500 MB space free on my 1 gb sd card. Please help me
Hi,
i have a new sandisk 2GB microSD card in my hermes. Because i have no card reader for my pc i want to format the card in my hermes.
Is it possible to do so? I cant found any option for formating.
The hermes says in settings >> memory that no card is installed.
I thing it is because the card is unformated.
I do so, but there is no storage card.
The mobile device also says that there is no storage card.
I know that Resco File explorer can format the card but most cards are formatted fat by default. The Hermes at least recognises this. If you're not even getting the sd card recognised then there may be either a problem with the card or with the Hermes.
It would be best to just fork over a few bucks and get a card reader for the pc as if the pc is recognising the sd card that means that the Hermes may have a problem. Try formatting FAT32 anywaty then put back into Hermes. May work.
If the pc doesn't recognise the sd card, does happen that new cards go bang, then I'd suggest taking the card back and getting a new one.
Cheers...
8gB micro SD
Hello,
I have the same problem. My 1gB card works fine in my Hermes but the new 8gB is not recognized. Spec says phone can only take maximum of 2gB but other forums say can use 32gB. My latest clue is that the card was preformatted with FAT32 and the Hermes requires FAT. However FAT can only deal with Volumes up to 4gB. So I stumped.
If you read a bit further you'd realise that these people with 32 Gb cards run custom roms which have the patch applied...
There is a cab file running around that allows you to run sdhc cards on WM 5/6 but I can't remember what its called (try sdhc patch in search)...
Using Resco and trying to format 8GB SDHC gives me an error, "cannot format selected storgae card. Cehck if your card is unlocked. I've searched around but found nothing, how the heck to unlock a Micro SD card?
cheers
Try the free Storage Tools from www.softwinter.com
I used it on my 16 gig SD card with no problems - it fixed some fault.
Try to format it on a desktop/laptop
no format via resco explorergo to settings-connections-USB TO PC, select SD CARD MODE, then go to desktop, and use the standard formating way, NO QUICK FORMATING. this sure work. i did it .
Hi,
I need to copy a folder 2gb + from my external SD card ( a 64 gb UMS 1 Samsung SD card) to my PC. With a standard USB connection on MTP/Media storage , I just keep getting :
Calculation time remaining to copy prompt on my PC and the folder never copies.
So I was hoping to enable Mass storage mode. I tried SG USB mass storage enabler, but it gives an error:
"An error occured while identifying the SD card. The card is either not ready or there is no SD card inserted. If there is one inserted, please exit the application and try again, if it still doesnt work, please contact the developer via email."
Can someone please help?
PS:- Mine is i9500
I don't think there is any way other than going custom rom or getting a usb memory stick with an sdcard slot.