my xda2 won't detect my sd 256mb storage card. It did for a while but now seems to have stopped. It will still detect my 128mb storage card. Why won't it work? It recognises that the expnasion slot is in use so how come the storage card can't be seen. There is no file to view in file explorer and again when synched it doesn't appear on the screen of my pc. But if I swop and put the 128mb card in that card appears. Weird?
No it is not weird! I think your 256 MB SD card is fried. To unsure it is not try accessing it on PC with a card reader.
Have had the same problem twice with a 256 MB SD card from sandisk.
Mark
Thanks, but what does 'fried' mean. It worked for a while. Are you suggesting it's overheated?
fried mean that it's dead, not going to work ever again,
broken .......
sometimes eletronics just die for no reason
to be sure you can try it in a sdcard reader for pc
or you can try storage tools or pocket mechanics
and see if you can format the card using them
or if some of their options can detect the card
Sorry but I don't have or know anyone with a card reader for these small cards. I'll just have to buy another card.
Related
Hi , all something strange happened to my XDA II SD Memory card!!! , i was installing an application on the SD Card and i went to the SD Card to explore it searching for something while the XDA while installing but i couldn't see all my old files , when i check the memory status i can see that i am using 70MB if the 256MB but i can't locate the files.
can any one help.
I had the same problem with a Sandisk 256mb card.
I've found that it works fine with a Lexar 128mb card though.
So it looks like the XDA2 has problems with SD cards as well as a completely duff bluetooth implementation.
Re: SD memory Card files disappeared
raheeeb said:
Hi , all something strange happened to my XDA II SD Memory card!!! , i was installing an application on the SD Card and i went to the SD Card to explore it searching for something while the XDA while installing but i couldn't see all my old files , when i check the memory status i can see that i am using 70MB if the 256MB but i can't locate the files.
can any one help.
Click to expand...
Click to collapse
Man thats bad news, have you tried doing a soft reset.
Also if you have a PC card SD reader try running Scandisk on the
card.
BTW as you can see it not a good idea to access your SD card while
programs/files are being installed / written to it.
HTH
Sandisk
ok interesting , i am also using Sandisk 256MB!!!
i tried soft reset and it didn't help.i will try to find a PC reader and see if i can get anything out of it or i might try to use it on my brother XDA 1 because most of the files were used on my old XDA with PPC2002 rom.
Hurray, its not just me then. I have a 128mb dane elec card and 70meg has disapeared. Im not sure if anything was on teh card previously and I dont have a card reader to check. Its most annoying!
Storage Card slot kaput
I bought a brand new generic 2GB SD card and had it working for a day. It just wasn't working anymore one morning I have left my XDA II overnight on the cradle. Now it wont accept any MMC or SD card I put on it. Any idea what could have gone wrong?
When it was still working I tried copying media files on it (in Microsoft knowledgebase they confirmed in order for media files to work in storage cards you have to create My Documents folder did this on the several cards I tested but to no avail)
The storage card I bought was 2 GB, O2 site says XDA II has been tested on 1GB storage cards--could I have burnt my SD card slot?
Maybe the card brand was too generic-- but then I tried other branded SD and MMC cards after the day my slot stopped recognizing and it still didn't recognize Sandisk (512) and Leica cards (64MB)
The SD card in question is still detected if you put it in a card reader then connect it to a PC
Help badly needed, I'm losing so much productivity with very small storage/ROM space
Hanshake said:
The storage card I bought was 2 GB, O2 site says XDA II has been tested on 1GB storage cards--could I have burnt my SD card slot?
Click to expand...
Click to collapse
Well, I'm using Kingston 2GB SD card and it works perfect... and it's a high speed card.
You may have your SD slot broken. My slot for example from time to time gets the card disconnected (let's say, every few hours), and I have to pull it off and put back in.
in a sdcard reader undelete tools from pc can recover files from sd cards as they can with harddisk
like undelte plus
I have a 2gb SD card that was working, but I thought I would be clever and use the SD reader in my Tosh so that I could transfer large files more easily to the card for my exec. But when I was asked to format my card by Toshiba's software, I went through the process and thought it was successful. But then at end of process the phrase "Please stop a SD memory card, then insert the card again" came up, so took card out, re-entered it in the reader and tried to attempt to transfer files to it. However windows then told me that it was not formatted and would I like to format it. So yes, I do, but although windows formatted it, it reduced the capacity from 2gb to 956 mb or thereabouts. It was recognised by the exec again, but with severe consequences as never bought a 1 gb card.
Help please...
Sounds to me like your card reader doesn't read cards bigger than 1 GB. I had the same issue with my 4 GB card. Tried it with a different reader and the PC saw all 4 gigs, never asking me to format. See if you can try a newer SD card reader?
The same thing happened to me with a 1 gigabyte pcmcia card. It was working fine in my laptop then I put it in the card slot on an Ipaq and it also did a format. The card is now exactly half the memory it should be and no way can I get it to work as a 1 gig card even though I have tried formatting on the pc.
I have found that my 2GB card formatted on my Palm LifeDrive was not readable on my laptop. When I formatted using a Toshiba format utility the space on the card was down to 1GB. It did work okay on my JJ. I had to re-format it on my Palm and then for reason it was okay again and could be read by my laptop - I did not use any card readers as the laptop has a built-in reader. And I re-formatted on my laptop using XP format softwsre and the 2GB storage was retained.
@Wannabe, have you got access to another PC or card reader to reformat your card. Also I found WM5 file managers could not reformat and regain the lost capacity
been on to Tosh
Toshiba are extremely helpful...not! Told me to get another card and see if that works as it might not accept the card. This is a Sandisk card which I believe is made by Toshiba...or at least in collaboration. Am going to check Sandisk for an answer as well...keep the ideas coming please
Hi there.
Try reading this post i made ages ago about formatting and re-newing your sd cards. It might help. It is regarding my 512mb sd card, but the principles are the same.
http://forum.xda-developers.com/viewtopic.php?t=21920&highlight=lydiachris
I strongly recommend using media recover, even if it's only a trial version to "wipe" your sd card to re-new it to it's factory condition. It covers and re-formats the whole card sector by sector.
http://www.mediarecover.com/
Give it a go and let us know.
Regards
lydiachris
If none of the other suggestions work then try this program that I posted on another thread:-
SDFormatter.zip:
http://forum.xda-developers.com/viewtopic.php?t=30900&highlight=
Use it with a card reader, follow instructions and your PPC should be able to read the full capacity.
SanDisk have taken back card...
Thanks for the suggestions, will keep in mind for future. Sandisk took back the card and found that it had become corrupted so have sent out another one. tks for suggestions though.
I just bought a 2gb sandisk sd card
it is recognised by the magician but each time it switchs to stand by mode the "memory card" file disappears...So I have to take it out and to insert it again (two times) in order to see it again.
Is it normal ? or there's a problem with this card ?
thanks
:shock:
up
Good to read, Storage to the people!
Take a look @ the card params too. Somehow a magician communicates better with a fat(16) card than fat32.
Have fun, M
thanks for your comment...
I can only format the sd card with the magician because i don't have a sd card reader for my PC. But with the program I use (FORMAT) I cannot choose FAT 16 or 32 - do you know a soft to do this ?
PHM Pocket Mechanic is very good for this, available on trial
I just received my Sandisk Ultra II 2GB card and it's working fine with my S100 (1.12) and I didn't have to format it when I received it.
However I have just come upon a problem. The card works fine in my S100 and I can copy files to it via ActiveSync. In order to speed things up I just tried putting it in the card reader in my laptop which reported it as unformatted...
Got the Sandisk Ultra 2 2GB for my M500 and it works fine in the phone , my card reader however does not like it either.
However i have sd-cf adapter that i use with my camera , i sloted the sd card in to that and in to the card reader and it works fine at very high speed.
Hope that helps.
C.
Laptop doesn't have CF and I'm reluctant to allow it to format the card in case I suddenly have issues reading it in my S100. :/
hi, i ran a benchmark in my 512mb SD card (unknown brand - missing logo) with pocket mechanic and the results are: Read 5.1X and Write 0.6X. Is it bad?
ok my card reader on my laptop and my S100 must talk a different dialect of SD card because no matter what I do they can't work together.
If I format the card in my S100 and copy files via activesync the laptop reports the card as unformatted.
If I format the card in my laptop and copy files on my pocketpc can't see them.
Size doesn't fit to 2GB Card
Hi I just got my sandisk ultra II 2GB SD Card and at first it worked fine.
Magician recognized it as 2GB then i copied some files from my computer with my SD Card Reader. But after inserting the card into my magician i got some weird looking characters, files, and folders. So I inserted it again in my SD card reader and formatted the card. After that my pc and my magician doesn't recognise the card as 2GB anymore just 1GB .
Any help to solve this problem and to get my 2GB back ?
I too facing the same problem it is detecting as 1 GB instead of 2 GB also the after formatting sd card in card reader made i unformated for ppc and viceversa dam,anybody have a solution for this ?
ok, i just purchased a 2gb sandisk mini sd card and when i put it in, the device detects it.
when i try to send files to the card via activesync, it doesnt work.
when i try to format the card with the SD card adapter in my laptop, it doesnt work either.
am i missing something? thanks.
blazin-asian said:
ok, i just purchased a 2gb sandisk mini sd card and when i put it in, the device detects it.
when i try to send files to the card via activesync, it doesnt work.
when i try to format the card with the SD card adapter in my laptop, it doesnt work either.
Click to expand...
Click to collapse
I have a 2GB Sandisk in my Cingular 8125 and haven't had any problems with the card. I've had some problems with the phone, but not the card.
You should return/exchange it.
Fairly common prob with the 2gb cards,esp the sandisk - try formating the card fat16 on your device, with storage tools or sktools (google both) demos will format your card.
Hi,
i have a new sandisk 2GB microSD card in my hermes. Because i have no card reader for my pc i want to format the card in my hermes.
Is it possible to do so? I cant found any option for formating.
The hermes says in settings >> memory that no card is installed.
I thing it is because the card is unformated.
I do so, but there is no storage card.
The mobile device also says that there is no storage card.
I know that Resco File explorer can format the card but most cards are formatted fat by default. The Hermes at least recognises this. If you're not even getting the sd card recognised then there may be either a problem with the card or with the Hermes.
It would be best to just fork over a few bucks and get a card reader for the pc as if the pc is recognising the sd card that means that the Hermes may have a problem. Try formatting FAT32 anywaty then put back into Hermes. May work.
If the pc doesn't recognise the sd card, does happen that new cards go bang, then I'd suggest taking the card back and getting a new one.
Cheers...
8gB micro SD
Hello,
I have the same problem. My 1gB card works fine in my Hermes but the new 8gB is not recognized. Spec says phone can only take maximum of 2gB but other forums say can use 32gB. My latest clue is that the card was preformatted with FAT32 and the Hermes requires FAT. However FAT can only deal with Volumes up to 4gB. So I stumped.
If you read a bit further you'd realise that these people with 32 Gb cards run custom roms which have the patch applied...
There is a cab file running around that allows you to run sdhc cards on WM 5/6 but I can't remember what its called (try sdhc patch in search)...