Related
I rooted my MT3G early on using the goldcard method - it is currently running the RAv1.1.0h rom from the original rooting thread. It has the 1.33.2005 SPL and the 3.22.20.17 radio. In fastboot I can see that it the SPL is an HTC version (I think that is what PVT 32B ENG S-OFF H means, right?).
I'm having trouble moving to a 32B rom, and no matter what I try, I can't get the damn recovery image to switch from the current RAv1.2.1H to the G - which is (I assume) why I can't install any 32B roms.
Any foolproof way to change my recovery image from H to G? I've followed all the steps listed on how to do this in Fastboot and using ADB to switch it over, but no matter what I do, it has no problems booting correctly with an H recovery image, but not with a G.
Any 32B roms just makes the phone hang at the splashscreen, so I know it's a rom issue.
OR - Am I missing a step here - is there a different spl I need in order to get my MyTouch 3G to think it is a G edition again. OR easier yet, should I stop whining and just find a reliable 32A rom that works on it (assuming something without too much HERO stuff?).
YES - I searched everywhere, I spent countless hours on it, but I can't help feel I've missed something really stupid, so feel free to call me names and point out the obvious (just don't say "try Google).
Are you still able to use flashrec? If yes try to flash this one>> cm-recovery-1.4 works fine if you want 32B roms. Enom uploaded latest version yesterday.
http://forum.xda-developers.com/showthread.php?t=549754 nd if you want version prior to this then go to http://www.4shared.com/file/129108782/3953f016/HTC__crc1__Android_rooted_Rom_32B_TMobile.html
unzip and make sure to install one after the other. Large one first and rename as update ,put in your sd card. Once that is performed then go to the next small one about 14mb. Rename as update and put it in sdcard. Dont forget to delete the large one if already there.
Let us know how you go on.
No - Flashrec won't run since the rom I'm currently using has the exploit patched.
Good tip though, thanks! Any other thoughts on why I can't get the 1.2.1G recovery image on my phone? Or an alternative way to get it to install?
EDIT: Took a few steps back, installed the sappimg for the MT3G, then did flashrec and then did the update with the rom you posted. Thanks so much for the tip and inspiration!
Yes, well done.Thanks for letting us know.And yes flashrec wont work on these rom also. I tried many times to flash with RAv 1.2.1image but it seems it was not possible. I asked emon in his T Mobile rom thread where he gave me a tip as to how to go about RAv.... but that hasnt worked.
But there is a solution if al you want is to make 3 partitions.
I followed Paaragon method as described on http://forum.xda-developers.com/showthread.php?t=512873
and it worked. So try that.
I tried many different roms and finally settled on enomther's
because it is very fast, not too cluttered and just perfect for 32B boards. And further more, there isnt anything that doesnt function.
PS: I prefered the one prior to current as on 4shared. But thats personal.
unroot completly by re insttalling the saphimg and go with the oneclick root method from the unlocker thats what i did and TITS! perfict running hero and full 32 b envierment raido and roms ... be carefull with the 32 a 32 b mixup could be the end of your touch....
Guide To rooting mytouch 3g 32b (Even if you have 1.6 update)
Propz to:Amon_RA, andreev2001, Cyanogen, and any one else sources I used
Ok after Searching the forums and finding all types of ways to root a Mytouch and having some/no luck I decided
to created a thread that goes into complete detail(or try to at least) about each step that is guaranteed to work if done correctly.
READ
This guide does not require a goldcard or adb . I am also not responsible for bricked/broken phones. Now since that's out of the way happy rooting!!
IF your phone is currently running 1.5(cupcake) already then skip to step 3
1.First of all we can't really do anything with 1.6 so we must downgrade to 1.5 by downloading this sappimg.nph and installing it
2.Once downloaded put it on your sdcard and reboot and go into hboot mode (Hold END+VOLUME DOWN). Preform the update
3.Once update is COMPLETLY finished and it asks you to reboot. Do so, then load your phone up fully and download this apk here (flashrecovery.apk) then run it.
Skip these steps and go to step 4 if you know how to install a apk
3a.to install this apk you have to enable the install unkown source in your settings. To do this hit menu >Settings>Applications>Unkown Soruces(check this).
3b. After this go to the market and download a app called "Astro" (the description should mention somthing about file manager) or you could use another apk installer but I prefer this one.
4. After installing the apk run it and click on “backup recovery image” let it do what it does then click on “Flash Cyanogen Recovery 1.4″.
5.Once that is done you want to download the SPL by clicking here, then put it on your sdcard. After that download any ROM(If you dont know what a ROM is search, I cant tell you everything ) of your choice and rename it "update.zip" without quotes then place it in your sdcard
6.Reboot your g1 and hold down the "HOME" key and it should bring up the flash image recovery screen. Choose apply any zip from sd and then choose "update.Engineering-SPL-HBOOT-1.33.2005-signed.zip". It finishes almost immediately with message saying successfully flashed(if it doesn't you prolly ate to much chicken ).
7. Then after it is installed select the restart option and then load into fastboot mode (Hold "BACK" arrow key while its restarting). Once fastboot is loaded the SPL info should say HBOOT-1.33.2005 (SAPP30000). If it does congrats almost there!!!!! If it doesn't, you did somthing wrong and you need to retrace you're steps.
8.Exit fastboot by hitting the "GREEN" button and before the phone boots up hold the "HOME" button and then go to "apply sdcard:update.zip". Let it install and VOL LA you installed your ROM. Preform a reboot and you will now have a rooted phone with a custom ROM
1) thanks for posting, ive tried to follow other instructions over the past few days to no avail
2) any chance of hosting the sappimg.nph file somehwere else? I cant access rapidshare from my phone. I would greatly appreciate it.
OMG SOOO EASY!!!! Mods should sticky this as the new root / rom upload process
I was running android 1.6 on tmobil mytouch 3g with perfected spl 1.33.2006
@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting
@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting
Thanks for posting - much appreciated. Can I ask what the benefit of changing the SPL is? Is this required?
My concern is regarding warranty - if I flash a new SPL, it is my understanding that I will not be able to flash my current one back, and hence return the phone to stock if the need arises.
ParanoiaPersonified said:
Can I ask what the benefit of changing the SPL is? Is this required?
Click to expand...
Click to collapse
Yes, it is required. You cannot root with the MT3G SPL, so you need to change the SPL.
ParanoiaPersonified said:
My concern is regarding warranty - if I flash a new SPL, it is my understanding that I will not be able to flash my current one back, and hence return the phone to stock if the need arises.
Click to expand...
Click to collapse
You can flash it back to the original SPL. You would then be unrooted. Look at Amon_RA's original rooting process with Gold Card. At the bottom, he gives directions on how to return your phone to the unrooted state in case you need to do that.
Thanks, I thought with one-click-root, once you'd got the recovery rom flashed, you were done - that you had root and could flash what you liked.
For the record, I'm Voda 32B, but have perfected SPL .0007.
[EDIT] Yes, that thread has a file to return to stock, but only for MT3G, which is why I am hesitant to flash a new SPL to my device.
I've still seen in lots of places mind, that suggest this process works without the flashing of a new SPL. Such as: http://www.ryebrye.com/blog/2009/08/16/android-rooting-in-1-click-in-progress/
[EDIT]
What happened to the ability to format and
and put partitions from the recovery? I just got another Mytouch and rooted it and no ability to put the partions from the recovery mode? I think I had version 1.2 and now I have 1.4
FenderGuy said:
and put partitions from the recovery? I just got another Mytouch and rooted it and no ability to put the partions from the recovery mode? I think I had version 1.2 and now I have 1.4
Click to expand...
Click to collapse
You still can, but not with the recovery img ur using wirch is cyanogen 1.4. Just flash amans new recovery img and you will be able to partion
4. After installing the apk run it and click on “backup recovery image” let it do what it does then click on “Flash Cyanogen Recovery 1.4″.
backup failed:I received that could not run command
cparekh said:
Yes, it is required. You cannot root with the MT3G SPL, so you need to change the SPL.
Click to expand...
Click to collapse
I have rooted my myTouch3G with the 1-click method (twice actually, needed to take it to the store), and I have the perfected SPL 1.33.2006.
The main issue with this SPL is that it does not allow you to use fastboot. As far as I know, this has nothing to do with root access.
Can confirm that I've performed the OP's procedure but *without* flashing a new SPL, and everything is working fine.
Now running CyanogenMod 4.2.2 w/ CM Recovery 1.4.
Does anyone have the link to the partitions recovery? I tried to put the Hero recovery on and it does not want to come on and I still show the Cyanogenmod v1.4 +jf....someone help
Also in the top it has Andriod system recovery (2)? I did it twice, how do i take one off?
kryptik06 said:
@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting
Click to expand...
Click to collapse
Any word on rehosting? I know its a pain but my phone is my only internet connection.
acis said:
Any word on rehosting? I know its a pain but my phone is my only internet connection.
Click to expand...
Click to collapse
here you go sorry for the wait
http://www.4shared.com/file/145083511/5ffeb21d/SAPPIMG.html
vodafone htc magic 32b gives error to ur method
error "update fail model id incorrect "
i think this sappimg is for the mytouch and not for htc magic vodafone. so it gives this error.
do you have any solutions for this.
thank you
kryptik06 said:
here you go sorry for the wait
http://www.4shared.com/file/145083511/5ffeb21d/SAPPIMG.html
Click to expand...
Click to collapse
Flashed last night, worked perfectly. I had no idea it was going to be this much faster. Thankyou.
I am looking for a rom that has a wifi tether app!
yes I am to the step where u download a rom and I am looking for a rom that has WIFI TETHER for my laptop...
much will be appreciated if u can help=D
- THANKS
well i guess right now i just want my phone rooted...
i just want a rooted phone cuz i can download a wifi app i just need a rooted phone....thanks for your post though....much much much much appreciated...nice and simple...other post or vids ive seen go to far in to detail about it and i forget what step im on .lol
-THANKS
Mods can we make this a sticky to stop further irrelevant threads
Please categorize your question accordingly, Anaylize which forum to post it
Development forum is only for development of phone OS related stuff
Q- My phone is stuck and the android loading or the second screen
A- your ROM flash went wrong or some system files are missing
Remedy- Flash the ROM again or try flashing some other ROM, check your SD card if its inserted properly(If you have Linux-swap or apps 2 sd activated)
Q- I cant go past the first splash screen and i cant move into recovery or bootloader
A- Say goodbye to your phone, it is bricked.
Remedy- PM me maybe i can help you get a new phone (already got a new phone after bricking)
Q- I cant go past the first screen but can enter recovery or SPL
A- Your ROM is not flashed properly or check your SDCARD maybe its not inserted (SDCARD step only if you have apps 2 sd , linux-swap or data 2 sd)
Remedy- flash a new ROM, use nandroid and and try reformatting the ext partition
Q- My phone is slow
A- Your phone is overloaded
Remedy- Try wiping, removing some apps and increase linux swap
Q- Home screen reloads after quitting Application
A- Your RAM is not enough, phone quits Launcher or Rosie to make some RAM free
Remedy- Use or increase linux swap or try increasing swappiness
Q- Sdcard says update.zip not found
A- maybe you renamed the update.zip as update.zip.zip .If you have enabled show file extensions for know file types then rename it as update.zip and if not then rename it as update
Q- Which ROM is best for me/ Which ROM is the best for 32A/B?
A- Take some time on the forums, look at the ROMs available for your device and individually assess what works for you by reading the various issues affecting them and make a decision. If that still doesn't work out for you, hey, that's what makes XDA great, try a different one and so on, till you find one that YOU'RE happy with. It's very subjective since what my needs are could be totally different from what yours are.
Q-What will/is released, When will be released, New is released
A- Post is General Forum, leave this forum for Phone Development by Developers
Any other questions or suggestions welcome
Q- Which ROM is best for me/ Which ROM is the best for 32A/B?
A- Take some time on the forums, look at the ROMs available for your device and individually assess what works for you by reading the various issues affecting them and make a decision. If that still doesn't work out for you, hey, that's what makes XDA great, try a different one and so on, till you find one that YOU'RE happy with. It's very subjective since what my needs are could be totally different from what yours are.
Q- ADB doesn't find or see my device?
A- I suggest reading the Sapphire Wiki as it contains a lot of information about troubleshooting when you're stuck
Q- I have no data/ 3G connection
A-Check under settings ->wireless controls->mobile networks->access point names, If you have no APN set then add your carrier APN settings from this list here
anybody with a new no thread start wiki
charnsingh_online said:
...
Q- I cant go past the first splash screen and i cant move into recovery or bootloader
A- Say goodbye to your phone, it is bricked.
Remedy- PM me maybe i can help you get a new phone (already got a new phone after bricking)
...
Click to expand...
Click to collapse
Not 100% correct: if you can still load in fastboot mode (vol DOWN+POWER) you can still boot a recovery image and flash it on the device:
1. fastboot mode
2. fastboot boot myrecovery.img
3. (in the recovery) adb shell mount /sdcard
4. adb push myrecovery.img /sdcard/recovery.img
5. adb shell flash_image recovery /sdcard/recovery.img
myrecovery.img: whatever the file is called.
Bootloader is same as fastboot mode
Hey...
How do I know if I have a 32a/32b phone?
I've got a myTouch 3g and I just got it a month ago.
Is rooting illegal? I know it voids your warranty but do you get apps for free and stuff?
juiceaccts said:
How do I know if I have a 32a/32b phone?
Click to expand...
Click to collapse
Boot your phone into fastboot mode:
Power phone off
Hold Back key and power phone on
It will bring up a screen which either says
SAPPHIRE PVT 32B SHIP S-ON G
or
SAPPHIRE PVT 32A SHIP S-ON H
There will be instructions on the screen to power the phone off so you can boot as per normal.
elegos said:
Not 100% correct: if you can still load in fastboot mode (vol DOWN+POWER) you can still boot a recovery image and flash it on the device:
1. fastboot mode
2. fastboot boot myrecovery.img
3. (in the recovery) adb shell mount /sdcard
4. adb push myrecovery.img /sdcard/recovery.img
5. adb shell flash_image recovery /sdcard/recovery.img
myrecovery.img: whatever the file is called.
Click to expand...
Click to collapse
Yeah but charnsingh says, if we CAN'T go into recovery.. You're assuming we can
The post is a bit misleading, cos we don't expect physical damage to the device (in which case, you get to the first splash, but can't reach recovery.. i.e. your Back/Vol. down buttons don't work)
Q: What's Goldcard? and how to make a Goldcard
minhzc said:
Q: What's Goldcard? and how to make a Goldcard[/QUOTE
damm - i understand all, but what is a goldcard and how to create?
Click to expand...
Click to collapse
Goldcard, a special sd card that ur phone spl accepts, search the dream forum
Whenever I flash a new ROM I backup my data and apps using either Backup To Root or MyBackup Pro. When I reinstall my apps it never puts the apps back into the Market under my Downloads so that if the app developers update their apps it shows that there is an update. IN fac the only apps shown are the ones I've purchased.
What do I need to do, besides reinstalling each one individually, in order to have the Market get all my apps in the Downloads the way I want them?
Thanks
can someone explain what SPL refers to?
and then i hear terms like perfected SPL, eng SPL....
ive flashed some ROMs earlier...without worrying too mmuch about this SPL business, and now with a mandatory rogers update out, people are talking about SPLs (see rogers thread)
cheers
So what is an SPL anyway? What does it do?
The SPL, or Second Program Loader, is essentially the Android bootloader. It's job is more than just loading the Android OS - it also offers several other boot options, including Recovery mode, Fastboot, and HBOOT modes, and ultimately it's the SPL that allows manipulation of the flash nand on your device. Part of the SPL's job is to ensure that the data flashed to the device is correct. Most of the current shipping SPLs (apart from the "Perfect SPL's) let us flash a complete ROM image, but don't let us flash a recovery rom or boot image as it checks the verification signature. Haykuro has modified the SPL's available to remove this check and this is what the Engineering SPL's available offer. As the SPL is so crucial to the handset though, you have to be very careful when flashing it as if it's updated incorrectly then you may be incapable of restoring it without specialised hardware and knowledge. You essentially have a very expensive brick
Click to expand...
Click to collapse
From the xda HTC sapphire wiki
remap "search" button on MyTouch
I have searched the forum and only found results for the G1 or remapping the soft keyboard...
Can the search button (magnifying glass) be ramapped as hard key to the camera?
If this has been discussed and i missed it, links are appreciated.
If it's a kernel-level issue, i'm on enomther's TheOfficial 2.5.1 AOSP.
Thanks in advance
[Sorry mods if this isnt the right place to ask this, tired, at work and pretty much I was asleep at the wheel. Please move this to the appropriate subforum if need be. ]
if i download a rom using my phone can i rename it and apply it or do i need a computer. im already rooted and ive got the requirements for the rom already on my phone. i just want to know if its possible or not.
it will work without computer
ROM Development
Hi, I have been Googleing for a while now and cant find any info on how to remove my current Android keyboard from my current ROM and replace it with the Hero keyboard – does anyone have any links relating to ROM modification. I a have come across how to download the Hero keyboard and load it into your current setup but I kept on getting FCs plus I want to learn how to modify any part of a ROM not just the keyboard.
Thanks.
Does my new mytouch with the more ram and 3.5mm jack have an actuall name?
Hello, I recently purchased my first smartphone. The mytouch3g with 288 ram and 3.5mm jack. For two weeks now I have been researching about rooting and roms. Most of the info that i am reading/viewing is on the oringinal mytouch3g...does this stuff still apply to mine? Will installing a custom rom give me more ram? Obviously I am completely new to all this but I am finding all this stuff to be quite fascinating...Any help would be greatly appreciated.
Thanks
As a solution to the brick issue and not getting past the bootscreen or not beeing able to load fastboot or recovery here's a solution which I had tried on my magic after I lost all hope and it worked ..Thanks to God and google
while on the bootlogo screen stuck, insert your datacable. it will show fastboot in red color on top corner.
run the android sdk cmd from dos prompt and enter "fastboot boot recovery_image_name.img" provided you can find the appropriate recovery image for your phone.
after updating, it will restart and you will bt good to go
okay I'm trying to root and install cyanogenmod on my phone using these directions... from wiki cyanogenmod...when I get down to flashing radio, I enter recovery mode and can't do anything. Just the phone and exclamation point... pls help its driving me crazy!!
not sure what guide you are following but you flash radio from fastboot not recovery.
In order to flash radio using zip file (not recommended, because it can brick your phone) you'll have to flash Amon RA.
The best method is to use the fastboot as Sleepy2 mentioned.
Thanks for the replies guys. I thought I had actually flashed Amon RA. Can anyone post link on how to use fastboot. All this searching is driving me crazy. I'm trying to get it rooted so I can get rid of it.
At this point I have to do something. I downgraded to 1.0 as cyanogenmod instructuctioins say, but thats about all I have accomplished. I phone was so much easier to jailbreak and unlock
http://forum.xda-developers.com/showthread.php?t=532719
We could go along like this forever but I am already getting bored with it. So how about you provide some information.
What guide are you following?
What is your current SPL and Radio?
What recovery do you currently have?
lulz... nevermind, I'm slowly getting it... I'm not done yet.. seems like I go from one problem to another though. I'm starting over and trying it again. Thanks so much though, I'm sure I'll have more questions.
Sleeepy2 said:
We could go along like this forever but I am already getting bored with it. So how about you provide some information.
What guide are you following?
What is your current SPL and Radio?
What recovery do you currently have?
Click to expand...
Click to collapse
@ jnralp00 - Please provide the information requested, so we can help you better.
i've been there before.. not sure if you figured it out yet but if you still using recovery to root follow this guide http://www.youtube.com/watch?v=DR0HpUVv-BY i used this back when i didnt understand fastboot and it was actually real simple. just note that if your on 1.6 you need to downgrade to 1.5 theres a link on how to do that in the description of that video.. and also when you get the G1update.zip from that link you need to rename to update.zip (just delete G1 from the title) and also after you complete that method you need to flash the Danger spl which you can find 100's of links on how to do that here on xda.
on a second note: AFTER you flash "danger spl" there is a simple way to get your G1 to the current radio and hboot 2.22.28.25, 1.33.0013d also by using recovery.. i know its not recommended by most devs but if your unsure of fastboot and adb and stuff i would use it.. just be careful and follow directions exact!! remember you need the danger spl first before upgrading your radio or you can seriously brick your phone and that would just suck!!
hope this helps and if you have any questions at all feel free to ask before you do something your unsure of.. i will be more than happy to guide you in the right direction..
Can someone give me a link or explenation how to install a new rom on my htc magic?
Like how to root, etc etc?
(searched but cant find anything easy :s)
Well, you've certainly come to the right place.
As I've no idea what stage you are at, I'd say a good starting point is discovering what your magic is - turn it off, depress back button while starting phone.
Then begin your searching based upon that info......
I rooted mine following the cyanogenmod wiki. Knew nothing when I did and it worked out fine.
wiki.cyanogenmod.com (still can't post links)
By far, the easiest I've encountered. Still, feel free to ask questions about any of the steps and I'm sure there are a lot of people who'd love to help.
I have a 32A with radio 3.22.20.17 and Hboot 1.33.0009
(Sapp 10000)
I've installed the android SDK and the USB thing, I have a Magic from belgium (proximus) that shoudn't need to bee rooted.
So the only thing i need to know now is what do i need to install before i can instal a new rom and ho do i ionstall other radio+rom,
thank you
make sure you have all files on sd, and computer.
and have recovery etc.
follow the steps and double check it.
killerbie said:
I have a 32A with radio 3.22.20.17 and Hboot 1.33.0009
(Sapp 10000)
I've installed the android SDK and the USB thing, I have a Magic from belgium (proximus) that shoudn't need to bee rooted.
So the only thing i need to know now is what do i need to install before i can instal a new rom and ho do i ionstall other radio+rom,
thank you
Click to expand...
Click to collapse
You need recovery on your phone and the right radio/hboot. Once you have these the ROM BIBLE on here very useful.
Read everything carefully and don't rush into anything, as the wrong combinations of rom/radio/hboot can easily brick your phone.
With recovery on your phone, and the right radio/hboot, flashing the rom itself via recovery is fairly easy.
You download the rom to your pc, enter recovery and wipe your phone, move your new rom onto the sd card via pc or usb, then flash it onto your phone from the sd card. Obviously there's more to it (such as backing up and more wiping etc) and more detailed explanations are available on this site - this is just to give you an idea of what's required.
The links in Mumilover's signature proved extremely useful to me(see my flashrec confusion post), might be worth you looking having a look to see if any are of use to you as well. Good luck.
killerbie said:
Can someone give me a link or explenation how to install a new rom on my htc magic?
Like how to root, etc etc?
(searched but cant find anything easy :s)
Click to expand...
Click to collapse
There aare two guides stickied at the top and another within the first two pages of this forum.
Sent from my HTC Glacier using Tapatalk
Wow, no need for rooting! Have you tried installing a custom recovery image yet? Don't use ClockworkMod as they appear to have problems with 32A magics. Apparently, (according the cyanogenmod wiki) all you have to do is boot into fastboot and type a few things into cmd. BTW, you might have to type in the entire directory of the "recovery.img" you use when you use fastboot. (even if it's in the same folder as fastboot) I'm a noob so it took me a half hour to figure that out.
timothyjohnmora said:
Wow, no need for rooting! Have you tried installing a custom recovery image yet? Don't use ClockworkMod as they appear to have problems with 32A magics. Apparently, (according the cyanogenmod wiki) all you have to do is boot into fastboot and type a few things into cmd. BTW, you might have to type in the entire directory of the "recovery.img" you use when you use fastboot. (even if it's in the same folder as fastboot) I'm a noob so it took me a half hour to figure that out.
Click to expand...
Click to collapse
How to get into fastboot and what do i have to type in cmd?
Go to wiki.cyanogenmod.com and find the step by step process for your specs. If you get the "remote:not allow" message while flashing a recovery then you're probably going to have to change your spl
Sent from my HTC Magic/Dream using XDA App
killerbie said:
How to get into fastboot and what do i have to type in cmd?
Click to expand...
Click to collapse
I know there different methods out there, which I can't speak off, excuse me being biased but I have to say mumilovers fastboot commander was amazingly easy for me. In your case use the fastboot commander (magic version) in his signature. You simply download the commander, connect your phone via usb and enter fastboot (turn off phone, depress back button while starting phone up). You then have the ability via the commander to add recovery, change radio and change spl in simple clicks. Please note s-off/eng hboot is required (which you will find details of in fastboot) - which is why I can't use it anymore!!
you then can go off and change roms