Database Users

Questions about rooting htc magic

Hi, I've recently bought a HTC Magic and since then I've been reading into how to root my phone. Before I start I would like to know if it's possible on my phone.
Details:
HTC Magic Vodafone Uk (32B)
Hboot: 1.33.0007
Firmware version: 1.5
Build: CRC24
I've read from a thread in another section of this forum
that it would be impossible because of 1.33.0007 being a perfect spl BUT my phone is running the firmware version 1.5, with a CRC24 build. Would this mean I will be able to root my phone or not?
Also I've been reading up on how you either have cupcake or donut. My version is 1.5 so would that mean I have cupcake?
I'm worried that I might brick my phone so would prefer to use the one click tutorial at theunlockr (would add link but I can't) which is for htc magic running on cupcake.
Would it work?
Sorry for all my questions and I probably will end up asking more
Thanks if anyone can answer these for me!

You should be able to root using the relentless rooter or by following the guide on the unlockr. You are lucky you are running cupcake and don't need to downgrade

I think you are only really at risk when you flash radio and spl. Using the unlockr's stuff shouldn't be too bad. But read eveerything a bajillion times incase

same boat
Hey bunnybag
Was in the same boat as you until yesterday.
Also had a perfect SPL (0010) on a 32A.
I was also reading up a lot wrt getting a new ROM on my phone, and was also afraid of bricking it...
The gold-card method seemed quite involved, and that QMAT application doesn't exist anymore, and the newer version of it, does not run in XP or Vista...
Yesterday, I used the one click method from theunlockr, and after a few mistakes, it worked! Now I have a shiny CyanogenMod running with a 1.6 donut
It seems with the one click method -that you do not need to change the radio or SPL (which I guess are the most dangerous flashes to attempt)
Quicky summary of what I did, and where I deviated:
1) Read the one click method from theunlocker, and some of the comments at the bottom. Also - very importantly - watch the YouTube video at the top of the one click method page a few times!!
2) Downloaded the FlashRec apk (follow link on the one click method's page)
3) Installed FlashRec (the latest version of FlashRec looks slightly different to the one in the YouTube video but functions the same)
4) Did a backup of the existing recovery image via FlashRec. After the backup, you can copy the backed up .img to your PC...
5) Copied the latest Amon RA recovery image (v1.5.2) onto the SD card. Make sure you get the right one... there is a different one for 32A/32B... [Deviation from the one click method- which uses an older version of the RA recovery image]
6) Attempted to flash the new RA recovery via FlashRec. Here is where I struck a problem - the thing just stalled - for a good 10mins - and said 'do not interrupt' :|
I hooked up the USB cable, and from the command prompt ran: adb catlog
From here, scrolling up, I could see that FlashRec gave some message of invalid recovery image... Bit of a bummer - I checked the CRCs of the recovery image after copying it to the SD, and also tripple-checked the filename I typed into FlashRec! In the one click method page, they also warn about inadvertently adding spaces to the end of the filename when you type it in. I also checked for that.
I attempted it once more as follows:
-Rebooted phone
-Deleted the RA recovery .img from the SD
-Re-copied it onto the SD, and this time renamed it to something easy: ra.img
-Checked the CRC
-Ran FlashRec, and specified the path as: sdcard/ra.img
-Flash succeeded! maybe FlashRec can't handle very long file names?
7) After the recovery was flashed, I booted into recovery mode (HOME & POWER). Seems like the Amon RA recovery image takes slightly longer to boot that the stock recovery... so - don't crap yourself if it takes a few seconds. This is also a good point to stop, and watch the second video from theunclockr on how to load a new ROM...
8) After verifying that the new recovery image was working I booted back into Android, and I copied my ROM's files onto the SD. I used the Cyanogen Mod. The Cyanogen wiki has a page on how to load it for a 32A and also 32B.
Basically, you need the latest stable cyanogen mod, an Android 1.6 "defanged" ROM (link available on the Cyanogen wiki), and a new kernel. The kernel is 32A/32B specific, so get the right one.
9) With the 3 files on the SD, I booted back into the new RA recovery I just flashed.
10) Did a Nandroid backup
11) Did a wipe/factory reset [Deviation from theunlockr method: I did not format my SD card, or partition it into Ext & Swap. I prefer not to have a Swap partition on the SD, nor do I think I'll need to swap any apps out to the SD card... I think the 32A has enough space... you can read further about it in the xda-developers wiki, under page: HTC_Sapphire_Hacking_2]
12) Still in RA recovery, I applied (in order) a) the defanged 1.6 ROM, b) the Cyanogen mod, c) the new 32A kernel
13) Flashing it takes a while - there is a progress bar...
14) Reboot after all 3 were flashed. The first reboot takes a looong time... couple of minutes... don't worry, or try to reboot again... just give it time.
15) Once inside - tested everything: GPS, Wifi, Phone, Market, G-sensor, Gtalk, Gmail.
16) It might be worth while to note that once the phone is booted, and you've entered your SIM PIN, and the Android desktop is displayed, it can still take a few seconds - 4 or 5 I guess, before you are able to interact (swipe desktop left/right). Give it time to settle down, and all is well
//TODO: still need to flash a new splash-image...
Good luck - post back here with your results!

How to root Magic (32A) with Europe ROM ROM Version:3.05.401.3 with Sense?
Have somebody any idea, how to root Magic (32A) with Europe ROM Version:3.05.401.3 with Sense? Thanks!

bogo_mips said:
Hey bunnybag
-Re-copied it onto the SD, and this time renamed it to something easy: ra.img
-Checked the CRC
-Ran FlashRec, and specified the path as: sdcard/ra.img
Good luck - post back here with your results!
Click to expand...
Click to collapse
Ah, I tried using the unlockr's method and failed at flashrec. The unlockr kept saying that the reason was because I was already on Donuts but that is not true. I ended up using the relentless rooter software (looking back, his method is basically an automation of the original method).
Maybe you should post this also in the unlockr so that people who have "backup failed" messages know what to do?
Thanks for the info. It will be very helpful for other members trying to use the unlockr method.

Thanks for the post guys.
@bogo_mips: Great advice and I'll more than likely use this along with the unlockr one click tutorial.
Oh and there's one thing I'm worried about. My phone has somehow automatically downloaded the 1.6 upgrade and it keeps asking me to install it. Anyone know of a way to delete it so that it won't upgrade?
I'm worried that it might install if I turn my phone off.

@bunnybag: that 1.6 download sounds like a problem... if it takes, you'll no longer be able to do to the one-click method...
Check around the forum for advice. I'd guess - since the download would have had to happen in user-space, that the downloaded file might be sitting on the SD card or possibly the phone's flash. Get that Linda Filemanager app from the market and poke around... I guess if you could find the file, and delete / rename it - you could avert an install?
Alternativley, I'm guessing that if you can attempt the one-click method, that you'll have a new recovery image before you power down your phone, so - I think that will keep you safe...
@visitador02: according to the FlashRec page, there are 1.5 cupcakes out there which have been patched, so - FlashRec can't work on them... maybe that is what happened to you...

MyTouch 1.2 (aka Fender, aka LE) w/3.5mm headphone jack

Does your new MyTouch have a 3.5 mm headphone jack?
Are you confused on wether it's a 32A or a 32B?
Do you need to know how to root it?
Do you need to know how to flash a custom recovery and which one?
Do you have the right radio?
Are you afraid that you might brick your phone?
THEN THIS IS THE THREAD FOR YOU!!!
HURRY!!! HURRY!!! HURRY!!!​
For a limited time only! Get your questions answered without having to post a new thread!*
Good while supplies last!
*XDA-Developers and it's members are not held responsible for any damages and encourages all readers (members and non-members) to read thoroughly before attempting any modification of any device. Proceed with caution and at your own risk.

More information
crypysmoker said:
Universal Androot confirmed working. This method is no longer needed and is to dangourous for some people so please use universal androot 1.5.3+
IF READ CORRECTLY YOU WILL NOT BRICK. BUT, Since a few of you dont have that ability, I AM NOT RESPONSIBLE FOR YOU BRICKING YOUR PHONE. There are no pros to rooting this phone yet, leave it alone if you dont know what your doing PLEASE. I beg you. You are in essence almost bricking your phone in order to root it in the first place. These arent fun and games, It is dangerous to rush this stuff
Listen.. Im more then happy to help people. BUt I fully understand why so many devs have left this place. Some of you are so utterly ridiculous with your questions, wanting someone to hold your hand. I cant sit on gtalk for hours helping you go through what should take 10 min , I have a life and kids and other things to do. I did this because I was bored and wanted to see if I could. There is not point in rooting it yet, there are no roms, nor will there be for at least a month. Please, if you cant even understand simple questions, have never rooted or even used an android phone before, please.. do not bother me. This place is insane with stupidity. I will change the tutorial in a little more detail later, but fo rnow, DO NOT DO THIS IF YOU DONT KNOW WHAT YORU DOING. IF YOUR BREAK YOUR CRAP< I DONT CARE, BECAUSE IT WASNT MY FAULT.
I am in no way an angry or mean person, but you people have given me a migraine. I see why all the rom devs hide from here so much
THERE IS NO POINT IN ROOTING THIS PHONE YET PEOPLE, SO STOP.. OMG PLEASE STOP LOL
IT HAS BEEN DONE!!! lol
After 3 days, sleepless night and 5 min from returning the phone, Together with the Awesome Cursordroid We have achieved full root of the fender mytouch/ Mytouch 1.2 revision.
Now.. Understand.. not many will have the fender Mytouch.. but this is the hardware they WILL be using in the fully confirmed Mytouch 1.2
If you do not follow my instructions fully, NOTHING WILL WORK.
Start by making a working gold card, pay VERY CLOSE attention to what the instructions for making a gold card say
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
READ READ READ. DO NOT download the SAPPimg.zip file it says on that page.
Get the top fixed SPL file 2010 from here
http://forum.xda-developers.com/showpost.php?p=4332591&postcount=1
Once you have you working goldcard (remember, apply to PHYSICAL not LOGICAL) rename the fixed SPL/rom you just downloaded to SAPPIMG.img
Put that file on your gold card
Hold volume down while hitting power
You will boot into Hboot, and if goldcard was made correcly and file is in root, it will begin to read. MAke sure battery is full or chargeing. follow on screen directions for flashing. Reboot into Hboot.
You are now screwed with a downgraded SPL and radio that do not work on this phone YAAAAAAY.
Now grab the stock radio and SPL from Cursordroid here http://forum.xda-developers.com/showthread.php?p=5451898&posted=1#post5451898
From there on follow hiw directions for reupdating your radio and spl, plus give yourself a new recovery making ROOT.
Im not good at tutorials or typing on a tiny netbook keyboard so please forgive. Anyquestions please ask and I will go into more detail
In order
Goldcard
Amen ras fixed spl rom renamed SAPPIMG.img
Boot into Hboot volume down/power
let rom install saying yes to what it says. If it works..
Now boot into your recovery through fastboot
Flash phone with stock fender rom
reboot into fastboot
back out of update when it asks and flash STOCK radio and SPL back, now reboot
your splash screen for fender IS GONE, get over it. You can make a new one later if you realllly need to.
Click to expand...
Click to collapse

Yet, even more information.
http://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_Fender/1.2
Installing CyanogenMod on the 32A (myTouch 3G 1.2 / Fender LE (3.5mm jack) version) requires an additional step whereby a "gold card" is created as part of the installation process.
The process of upgrading from a stock ROM is fairly simple, following the instructions below.
Click to expand...
Click to collapse
Before you do anything — Make a backup
Don't forget to back up your data. If you have synced your phone with your Google account, your contacts, calendar, Gmail, and some Google data will not be lost and will come back after the next sync; However, you should backup anything you want to keep that is not stored on your SD card.
SMS/MMS messages
Call Log
Bookmarks
Applications; use Titanium Backup or the Astro file manager, for example
Any application data not on the SD card
It would also be a good idea to back up everything stored on your SD card in the rare case the card must be formatted to resolve any major problems.
Click to expand...
Click to collapse
Before you begin
What You'll Need:
1.Your myTouch 3G 1.2 or Fender LE.
2.Mini USB cable.
3.microSD to SD adapter for your computer.
Prep
1.Get the latest Amon_Ra recovery
Make sure you chose the G version
2.Create a "Gold Card". It is recommended (but not necessary) to use a spare microSD card.
3.Back up all your microSD card contents to your computer.
Creating the Gold Card
Create a Goldcard
Click to expand...
Click to collapse
Rooting
Downgrading
1.Download the sapping.zip file from here: Link Mirror 2.Place the zip file on your newly created Gold Card. If it isn't already, shut the phone off and place the microSD card back into the phone.
3.Then turn the phone back on by holding down Volume Down and Power. It should boot into bootloader mode and automatically find the sappimg file and ask you to push the trackball (action) to begin the update. Push the trackball and let it update.
4.Once it finishes flashing, it should ask you to reboot. Reboot and let it load to the new "htc Magic" boot screen.
5.Chances are at this point that the phone will not successfully boot. THIS IS NORMAL. Simply remove and re-insert the battery, as we're not done yet!
6.Download the following zip file (the stock myTouch SPL and Radio) and extract it: [1]
7.Copy the two files inside the zip to the root of your SD Card
8.Take the latest Amon_RA recovery you downloaded earlier and copy it to the root of your SD Card.
9.Download terminal emulator from the market and run the following commands:
flash_image flash radio /sdcard/radio.img
flash_image flash hboot /sdcard/hboot_7201A_1.33.0013G_091021.nb0
flash_image flash recovery /sdcard/recovery-RA-sapphire-v1.7.0G-cyan.img
WARNING: Do NOT upgrade the SPL (hboot) with anything other than the 1.33.0013G version! Otherwise, You will lose audio to your earpeice.
1.Press MENU to power down the phone.
2.Reboot holding down the Power and Home buttons until the recovery menu appears.
Click to expand...
Click to collapse

Easiest method!
Easiest method!
candymanmike said:
This is a guide on how to root your phone and install a custom ROM using Universal AndRoot. It supports several phone models and is the simplest way to root a phone I have ever seen. It features a 1 click root and a 1 click unroot option. Rooting with this method does NOT affect your bootloader, therefore if your phone needs serviced you can (theoretically, I have not verified this to be true) simply unroot and restore to normal.
As always myself, XDA, ROM developers, your friends, your mom, the rulers of the world and the developers of this app are NOT responsible for any bricks YOU create by taking the risk of rooting your phone. Also there are no guarantees that your warranty will not be null and void. If you NEED your warranty, DO NOT root your phone. Use at your own risk!
First we will gather the items needed to complete this process.
Universal AndRoot Version 1.6.1 is the newest STABLE release. The newest version is 1.6.2 beta 5, which is where the updated list above comes from and is said to be very close to the final release version.
Next go to the Android Market and install AppInstaller (there are a few versions including appsInstaller by modmymobile, all are free)
While in the market, also grab ROM Manager (also free)
Next download the ROM you would like to use. I personally recommend CyanogenMod 6.0.0 DS - stable. This link will take you to the Cyanogen downloads section where you will have to select your phone and search for the ROM you want.
While you are there, also grab the Google Addon pack for your phone.
Of course it is up to you to choose a ROM you like. You can also keep your stock ROM if you choose.
Lets Begin!
Install the Universal AndRoot .apk file, the ROM you chose and the Google Addon to the root of your microSD card
Open AppInstaller and let it locate your AndRoot .apk on your microSD. Select it and install it to your phone.
Open Universal AndRoot from you app menu. It should read your phone and show your firmware version. Click the "Root" button and let it do it's thing. It really only takes a minute or 2. When finished it will let you know. Congratulations, at this point you are now rooted.
Now for a custom ROM!
Open ROM Manager. Install Recovery. The default recovery for ROM Manager is ClockworkMod Recovery (which is what I am using) but a lot of people seem to like RA Recovery. This option is at the bottom of ROM Manager under "Flash Alternate Recovery". Whichever you choose, let the Recovery flash.
Next choose "Backup Current ROM", then "Reboot Into Recovery" (for future reference, you can also get into recovery mode by turning your phone off, then hold down the "home" button hit the power button. continue hold home as it powers on.)
Chose "wipe data/factory reset" then "wipe cache partition". This step is important. I know from personal experience if you don't do this you may end up in a bootscreen loop!
Choose "install zip from sdcard". Navigate to the ROM you loaded on your microSD and flash it.
After the phone reboots (which can take a few minutes the first time after flashing a new firmware version) go back to ROM Manager and again choose "Reboot Into Recovery". Once in recovery, again choose "install zip from sdcard". Navigate to the Google Addon pack on your microSD and install it.
Once you are rooted and running your new ROM, go into ROM Manager and partition your sd card. This is optional.
That is it. You should be good to go! Way easier and faster than the old goldcard method!
This is my first XDA guide. I hope it is up to your standards!
Click to expand...
Click to collapse

Will all 32a/nr roms work on the 1.2?
Sent from my HTC Magic using XDA App

soub31 said:
Will all 32a/nr roms work on the 1.2?
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
NO! 32A roms WILL NOT WORK!!!!

As Amon Ra put it:
"The following instructions :
will void all warranties of your phone!
will erase all your userdata!
will change your current ROM/SPL!
will change your current splash screen!
could brick your phone!
Proceed at your own risk!"
So I've taken the guide that I used to root my myTouch 1.2 with T-Mobile, updated some of the information, and added some explanations. All thanks is owed to The Unlockr for the guide, I'm merely going to attempt to explain what your actually doing in the process and just try make the whole ordeal easier. If I would have known what i was actually doing, it would have taken me 45 minutes to root my phone, vice the good 7-8 hours I put into it. I am by no means an expert on rooting, so feel free to critique what I put in here, and I'll make adjustments as needed.
What's unique about the myTouch 1.2 and the Fender edition is that both phone's have a "perfected" SPL, that does not allow for fastboot access via USB. This means that you can't push any command prompt commands to the phone from your computer, which is what you have to do to get the phone rooted. With these instructions, you'll flash a "non-perfected" SPL onto your phone, load up a custom recovery (which is how you will load up ROM's and do a few other things in the future), and then reflash the phones original "perfected" SPL. Without the original SPL, your phone will not function correctly.
I would suggest opening all the links before continuing so you won't have to wait for the downloads to start as your going. Make sure you remember which link is which tab!!!
From The Unlockr:
I. Setup ABD/Create a Goldcard
Follow this procedure completely to create a working goldcard, then return to this procedure and continue:
How to Create a Goldcard
Follow these instructions without fail. If anything get's messed up here then you won't be able to flash a new SPL and you'll have to attempt to remake the Goldcard again. If you attempt to load the sappimg without using the Goldcard or without a properly done Goldcard, you will get either "Incorrect model ID" or "Main Version is Older". The Goldcard basically tricks the phone into not checking these two parameters, which is what let's you get the "unperfected" SPL on to your phone. ADB is the program that allows you to have a command prompt interface from your computer to your phone.
Note for Windows Vista and Windows 7 users: When your setting up your phones drivers during the ADB setup process, be sure to allow Windows Update to check for drivers. It will allow your computer to automatically install the drivers vice having to manually install them yourself. The option to turn it on should come up when Windows gives the notification that it was unable to install drivers for your device
II. Flash the Sappimg file
1. Download the Sappimg File and save it to your newly created goldcard (NOT in any folders, just on the Goldcard itself).
sappimg.zip
2. Once the sappimg.zip file is on your goldcard, turn off the phone and put your Goldcard SD into your phone. Then turn it back on by holding down Volume Down and Power. It should boot into bootloader mode and automatically find the sappimg file and ask you to push the trackball to begin the update. Push the trackball and let it update.
*If it tells you Error – Wrong Model ID or anything similar, the goldcard was not created correctly, go back to that procedure and try again.
Here your loading an Engineering SPL, so that we'll be able to get access to the phone via Fastboot USB and load up your new recovery. Be patient once you turn your phone back on, as it will unzip the file, then check the contents. If you get an error, you've got a problem with your Goldcard and need to redo it.
3. Once it finishes flashing press the "Send" button to reboot and you will notice your touchscreen does not work (don’t panic). Turn off the phone, then turn it back on by holding down Back and Power (to get into fastboot mode).
4. Download these two files and save them into C:\AndroidSDK\Tools folder you setup during the ADB setup procedure:
Stock MyTouch SPL
and Radio
5. Then download the Custom Recovery Image and save it to the C:\AndroidSDK\Tools folder you setup during the ADB setup procedure as well:
Amon Ra’s Recovery
6. Now that you have the recovery, spl and radio all saved in the tools folder of the Android SDK (same folder as the adb program), plug in your phone (while in fastboot mode from step 3).
7. Open the command prompt on your computer and type the following with hitting enter at the end of each line:
cd\
cd AndroidSDK\tools
fastboot devices
A serial number should come up, indicating that your computer can see the phone in fastboot mode. If so continue by typing in the following with hitting enter at the end of each line:
fastboot flash radio radio.img
fastboot flash hboot hboot.nb0 (the 0 at the end of this line is a zero not an oh).
fastboot flash recovery recovery.img
fastboot reboot-bootloader
8. Once the phone starts to turn back on begin holding home and power (do not let go until you see the recovery mode) to boot into recovery mode.
This could take a while. I believe the first time I tried to get in I had to hold them down for ~1 minute before getting in. You should see the HTC Magic splash screen pop up first. There is a guide to changing out the splash screen (which is just a picture) within these forums but I'll leave it to you guys to search for it.
9. You should end up in Amon Ra’s recovery mode.
10. At this point, you want to plug your ORIGINAL SD card into your computer and copy the "DCIM" and "Music" folders (if you have them) over to your computer to backup your pictures/video/music. Then take the Goldcard out of your phone and put your ORIGINAL SD back in.
11. With your phone connected via USB to your computer and in Amon Ra's Recovery, highlight USB MS and press the trackball. This should mount your SD card to your computer so that you can move files to it.
12. Download these three .zip files:
Cyanogen 6.1
Google Apps
614 MHz OC/UV Kernel
You need the OC kernel because there's a known issue with CM 6.1 having a green tint without flashing a new kernel.
13. Copy those three files over to your phone's SD within Windows, "Safely remove hardware" in Windows, then disable USB MS by pressing the Home button. Back out to the main screen.
14. In the recovery select "Wipe" and you want to wipe "data/factory reset" then "Davik-cache".
15. Back out to the main menu and select "Flash zip from sdcard". First you want to select " update-cm-6.1.0-DS-signed.zip" and hit Home to confirm. Once complete, select "Flash zip from sdcard" and this time select "gapps-mdpi-tiny-20101020-signed.zip" and hit Home to confirm. Once complete, one again select "Flash zip from sdcard" and this time select "oc614-cm-2.6.34.1-6.0.0rc2-signed.zip" and hit Home to confirm.
16. Back at the main screen select "Reboot system now". This will load your phone back up as normal and you should now have a working rooted phone with the Cyanogen 6.1 ROM! Jump in there and check it out.
If you want to try out a different ROM, check this thread out. Go to the section called "MT3G 1.2 / LE Fender".
Credit to DonJuan692006 for this.
Thanks to Amon Ra for his recovery images!
Thanks to Unlockr for the original How To!
Thanks to the Cyanogen team for an awesome ROM!
LINK Resources:
http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
http://forum.xda-developers.com/showthread.php?t=530492
http://forum.xda-developers.com/showthread.php?t=529019

wouldn't it better to recommend to use Pershoots OC/UV/XTRA kernel? It does OC to 614, is more current than Dumfuq 2.6.34.1 kernel.... honestly been pretty stable.
the previous builds of 2.6.35.9 and lower did not have the 3.5mm audio support.. but it was re-added in the 2.6.35.10. It also resolved the green tint issue of CM6.1-DS

NetrixTardis said:
wouldn't it better to recommend to use Pershoots OC/UV/XTRA kernel? It does OC to 614, is more current than Dumfuq 2.6.34.1 kernel.... honestly been pretty stable.
the previous builds of 2.6.35.9 and lower did not have the 3.5mm audio support.. but it was re-added in the 2.6.35.10. It also resolved the green tint issue of CM6.1-DS
Click to expand...
Click to collapse
Yeah I use pershoots myself from the rom manager.
Another OP made the thread actually and sent me the HTML via e-mail.
614 isn't stable for me though.

My Thoughts and Things to Know
READ ME BEFORE DOING ANYTHING TO YOUR PHONE OR STARTING A NEW THREAD!!!!!
The myTouch 1.2/Fender is a rather unique device. If you boot into fastboot you will notice that the following information is displayed:
Code:
Sapphire PVT 32A Ship S-on G
Hboot-1.33.0013 (Sapp31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009
Let's break that down a little bit.
You see in the first line 32A...but this is very misleading. The myTouch 1.2 is actually a 32B device, just with 32A memory and controller, but it IS a 32B device for pretty much all intents and purposes.
Secondly, you'll notice S-ON. This means that remote security from the bootloader is enable. What does that mean for the user??? Simple, you'll never be able to run a remote fastboot command.
Second line, 1.33.0013. This is your SPL and the ONLY SPL that will allow the phone to function properly. This, as well as the radio, will always need to be the stock versions or you'll either brick your phone or never get a ROM to work.
Also to note, this is considered a perfected SPL. What does "perfected" mean? Remember the "S-ON"?? That is what makes it perfected.
Lastly, the radio, 2.22.23.02. There is actually now a newer radio, 2.22.28.25 available, however, I personally have noted no real performance gain/loss. Again, along with the SPL, you will never want to change this unless you absolutely know what your doing or an expert tells you to.
Now, on to the good stuff.
How do I root my phone???
The first few posts of this thread are the various methods to go about rooting the myTouch 1.2/Fender. The easiest and least dangerous method would be to use one of the one-click root programs such as Universal Androot or SuperOneClick. These methods will give your phone permanent root permissions (permanent until you do a factory reset or receive certain OTA updates later on down the road). The big deal here is that with root permissions you are able to download a nice little application from the Market called ROM Manager that allows you to flash a custom recovery onto your phone. The custom recovery is the bread and butter of modifying your phone. It allows you to flash custom ROM's, flash new kernel's for overclocking, etc.
What radio should I use?/What's the best SPL?
Simply put, don't mess with your radio or your SPL ever except for under very specific circumstances. Those circumstances being, your rooting your phone using the goldcard method or you need an engineering SPL to be able to run a command from fastboot. Even in either of those cases, this should be done very carefully and you will always need to revert back to the original SPL/radio. If you ever need to run something from fastboot and are thinking about flashing an
engineering SPL to do so, make sure you ask an expert first before proceeding. The number one reason for people bricking their phone is because they have taken it upon themselves to try flashing random file they've found via Google.
What ROM's can I use?
This is an easy one. Pretty much any ROM made for 32B phones that does not require a specific radio. I haven't personally tried this out, but I've had reports from a few people that just about every ROM for the G1 not requiring a specific radio works for the 1.2/Fender. Worse case scenario if you flash a ROM that isn't going to work, you'll get stuck in a boot loop and will just need to flash a new ROM or restore a backup.
What is a backup?
A backup essentially saves the state of your phone. For those computer savvy, it's like creating an image of a hard drive. The easiest way to create a backup is via a custom recovery. Both ClockworkMod and Amon Ra's recovery's include backup applications (e.g. Nandroid, Bart, ClockworkMod). Immediately after achieving root, getting your custom recovery installed, and verifying that your ROM boots properly, you should create a backup. This way, if your phone ever starts going down the tube or you manage to hose something up with your ROM, you can simply restore your backup and be back up and running. This will not fix a truely bricked device however, so don't get your hopes up.
Is my phone bricked?
The basic definition of a bricked devices is one that will not boot into a ROM, will not enter the bootloader, and will not enter recovery. If you still are able to boot into any of the three mentioned, your not bricked and there's a chance to save your device. The problem is that when most people get close to this state (they can only get into fastboot for example) they'll go into a panic and start trying any and everything to get their phone back up and running. This is NOT the thing to do. If you ever are stuck in a similar situation, please come ask for help and don't do anything else with guidance.
How do I get into the bootloader/recovery?
All of these steps are to be completed with the phone powered off.
For fastboot - hold back+power until your loaded into a white screen with the Android dude skateboarding.
For hboot - hold Volume Down+power until your loaded into a white screen with the Android dude skateboarding.
For recovery - hold the home button+power until your loaded into your recovery. For the stock recovery it'll be a triangle with an exclamation mark in it and an error pointing to a box. Hitting the home button again will get you the rest of the way into the stock recovery. If you have a custom recovery you will be loaded into a basic menu.
It's essential to familiarize yourself with these menu's. Before you do anything to start rooting, you should boot into fastboot and right down the information there and keep it somewhere. If your run into problems later on and you can still get into fastboot, make sure you get in there and right down what it's showing then. Make sure you include whatever your fastboot information is whenever your posting about a problem in the forums.
That's all I can think of for now. So good luck!

kernels and spls
Could anyone help with two (or four) nagging questions I've been trying to find answers to?
1.a. what is the difference between droidbasement.com/g1/kernels/ram/2635/17/boot-cm_2635.9_ds_32b-oc-uv-xtra-ram-fp-120810.zip
and
droidbasement.com/g1/kernels/ram/2635/17/boot-cm_2635.9_ds_32b_radio2708-oc-uv-xtra-ram-fp-120810.zip
?
1.b. I have successfully flashed the first one on my device to fix the green hue issue on CM6.1. Is there any benefit to flashing the second?
2.a. I would like to change my splash1, but can't use fastboot because I don't have the Engineering SPL. Is there any easy way to change the splash1 without having to do the 3-step process of a) flash to Engineering, b) update the splash screen, and c) flash back to stock SPL?
2.b. OK this may be a long shot, but as a programmer, I'm kind of curious: if the answer to 2.a. is "no", then, is the "splash1" image saved in any recovery files anywhere when you do a backup (e.g. if I go into ClockWordMod ROM Manager and choose "Backup Current ROM", does the backup include the splash1 data?), and, if so, would it be feasible to search the recovery image for the splash1 data (e.g. with a program that looks for a binary string matching the raw data of the current splash screen)-- of course, the data would have to be raw and unencrypted and uncompressed-- replace it with the new splash1 data, and then do a restore from the resulting modified recovery file, in order to change the splash screen?
-------
Androot + ClockworkMod ROM Manager + CM6.1
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009, 22:33:27

mattewong said:
Could anyone help with two (or four) nagging questions I've been trying to find answers to?
1.a. what is the difference between droidbasement.com/g1/kernels/ram/2635/17/boot-cm_2635.9_ds_32b-oc-uv-xtra-ram-fp-120810.zip
and
droidbasement.com/g1/kernels/ram/2635/17/boot-cm_2635.9_ds_32b_radio2708-oc-uv-xtra-ram-fp-120810.zip
?
1.b. I have successfully flashed the first one on my device to fix the green hue issue on CM6.1. Is there any benefit to flashing the second?
2.a. I would like to change my splash1, but can't use fastboot because I don't have the Engineering SPL. Is there any easy way to change the splash1 without having to do the 3-step process of a) flash to Engineering, b) update the splash screen, and c) flash back to stock SPL?
2.b. OK this may be a long shot, but as a programmer, I'm kind of curious: if the answer to 2.a. is "no", then, is the "splash1" image saved in any recovery files anywhere when you do a backup (e.g. if I go into ClockWordMod ROM Manager and choose "Backup Current ROM", does the backup include the splash1 data?), and, if so, would it be feasible to search the recovery image for the splash1 data (e.g. with a program that looks for a binary string matching the raw data of the current splash screen)-- of course, the data would have to be raw and unencrypted and uncompressed-- replace it with the new splash1 data, and then do a restore from the resulting modified recovery file, in order to change the splash screen?
-------
Androot + ClockworkMod ROM Manager + CM6.1
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009, 22:33:27
Click to expand...
Click to collapse
droidbasement.com/g1/kernels/ram/2635/17/boot-cm_2635.9_ds_32b_radio2708-oc-uv-xtra-ram-fp-120810.zip is for the 2708 radio which you DON'T have so don't flash it.
No. Flash the Engineering SPL, flash the splash screen, flash the stock spl back. Only way.
No. Splash files are not saved or effected by nandroid. So you can flash the splash screen and restore a nandroid backup (or clockwork backup, whatever) and you'll still have your splash screen.

ok, thank you

can we install the new radio or spl on our phones?

soub31 said:
can we install the new radio or spl on our phones?
Click to expand...
Click to collapse
I've heard that we could but I wouldn't recommend it because it really doesn't benefit.

Binary100100 said:
I've heard that we could but I wouldn't recommend it because it really doesn't benefit.
Click to expand...
Click to collapse
also one last thing i guess we use 32b roms on our phones what about roms the use 2708?
could we just flash an appropriate kernel afterwards?

soub31 said:
also one last thing i guess we use 32b roms on our phones what about roms the use 2708?
could we just flash an appropriate kernel afterwards?
Click to expand...
Click to collapse
If you're referring to CM 6.1.0 and the like, yes.

Binary100100 said:
If you're referring to CM 6.1.0 and the like, yes.
Click to expand...
Click to collapse
not just cm6 roms like yoshi and enomothers when ever i flash them and then the right kernel i just get stuck at the splash screen

I've flashed Yoshi and it did not work at all. It boots to the spalsh1 then to the Android but bootloops from there. So no on Yosi. As for Enomothers, I have successfully flashed this rom and and enjoyed it. However, read all the information before flashing. He has certain requirements that are not compatible with our phones.

Which version of Yoshi are you guys trying?

Installing roms

Can someone give me a link or explenation how to install a new rom on my htc magic?
Like how to root, etc etc?
(searched but cant find anything easy :s)

Well, you've certainly come to the right place.
As I've no idea what stage you are at, I'd say a good starting point is discovering what your magic is - turn it off, depress back button while starting phone.
Then begin your searching based upon that info......

I rooted mine following the cyanogenmod wiki. Knew nothing when I did and it worked out fine.
wiki.cyanogenmod.com (still can't post links)
By far, the easiest I've encountered. Still, feel free to ask questions about any of the steps and I'm sure there are a lot of people who'd love to help.

I have a 32A with radio 3.22.20.17 and Hboot 1.33.0009
(Sapp 10000)
I've installed the android SDK and the USB thing, I have a Magic from belgium (proximus) that shoudn't need to bee rooted.
So the only thing i need to know now is what do i need to install before i can instal a new rom and ho do i ionstall other radio+rom,
thank you

make sure you have all files on sd, and computer.
and have recovery etc.
follow the steps and double check it.

killerbie said:
I have a 32A with radio 3.22.20.17 and Hboot 1.33.0009
(Sapp 10000)
I've installed the android SDK and the USB thing, I have a Magic from belgium (proximus) that shoudn't need to bee rooted.
So the only thing i need to know now is what do i need to install before i can instal a new rom and ho do i ionstall other radio+rom,
thank you
Click to expand...
Click to collapse
You need recovery on your phone and the right radio/hboot. Once you have these the ROM BIBLE on here very useful.
Read everything carefully and don't rush into anything, as the wrong combinations of rom/radio/hboot can easily brick your phone.
With recovery on your phone, and the right radio/hboot, flashing the rom itself via recovery is fairly easy.
You download the rom to your pc, enter recovery and wipe your phone, move your new rom onto the sd card via pc or usb, then flash it onto your phone from the sd card. Obviously there's more to it (such as backing up and more wiping etc) and more detailed explanations are available on this site - this is just to give you an idea of what's required.
The links in Mumilover's signature proved extremely useful to me(see my flashrec confusion post), might be worth you looking having a look to see if any are of use to you as well. Good luck.

killerbie said:
Can someone give me a link or explenation how to install a new rom on my htc magic?
Like how to root, etc etc?
(searched but cant find anything easy :s)
Click to expand...
Click to collapse
There aare two guides stickied at the top and another within the first two pages of this forum.
Sent from my HTC Glacier using Tapatalk

Wow, no need for rooting! Have you tried installing a custom recovery image yet? Don't use ClockworkMod as they appear to have problems with 32A magics. Apparently, (according the cyanogenmod wiki) all you have to do is boot into fastboot and type a few things into cmd. BTW, you might have to type in the entire directory of the "recovery.img" you use when you use fastboot. (even if it's in the same folder as fastboot) I'm a noob so it took me a half hour to figure that out.

timothyjohnmora said:
Wow, no need for rooting! Have you tried installing a custom recovery image yet? Don't use ClockworkMod as they appear to have problems with 32A magics. Apparently, (according the cyanogenmod wiki) all you have to do is boot into fastboot and type a few things into cmd. BTW, you might have to type in the entire directory of the "recovery.img" you use when you use fastboot. (even if it's in the same folder as fastboot) I'm a noob so it took me a half hour to figure that out.
Click to expand...
Click to collapse
How to get into fastboot and what do i have to type in cmd?

Go to wiki.cyanogenmod.com and find the step by step process for your specs. If you get the "remote:not allow" message while flashing a recovery then you're probably going to have to change your spl
Sent from my HTC Magic/Dream using XDA App

killerbie said:
How to get into fastboot and what do i have to type in cmd?
Click to expand...
Click to collapse
I know there different methods out there, which I can't speak off, excuse me being biased but I have to say mumilovers fastboot commander was amazingly easy for me. In your case use the fastboot commander (magic version) in his signature. You simply download the commander, connect your phone via usb and enter fastboot (turn off phone, depress back button while starting phone up). You then have the ability via the commander to add recovery, change radio and change spl in simple clicks. Please note s-off/eng hboot is required (which you will find details of in fastboot) - which is why I can't use it anymore!!
you then can go off and change roms

[Q] Unroot

Ok, I didn't want to start a thread but I have search for three hours and tried numerous things and i'm confused.
I need an IDIOTS guide to unrooting my phone.
I did a nandriod backup and I have my Standard ROM, I had clockwork but that is gone.
All I want now is the Root gone so I have a standard HTC Wildfire back
I am on Vodafone, UK.
Any help appreciated, i've searched through all the guides downloaded loads of stuff and tried flashing it and it all fails, there seems to be many ways this might work but I can't get passed half of the steps.
If someone could please give me a hand it would be much appreciated.

1.) Create a Gold Card. Follow this guide: http://android.modaco.com/content/general-discussion/305672/creating-a-goldcard/.
2.) Download a RUU that fits your demands and make sure it starts with 2.xx from here: http://shipped-roms.com/index.php?category=android&model=Buzz. I recommend you to download this one: http://shipped-roms.com/download.php?category=android&model=Buzz&file=RUU_Buzz_Froyo_HTC_WWE_2_22_405_1_Radio_13_55_55_24H_3_35_20_10_release_160191_signed.exe because that one is indicated WWE, so it should work world wide.
3.) Install it on your phone using PC. (The file you downloaded should be .exe so you just have to plug your phone to PC in charge only mode and start the .exe you downloaded).
4.) Follow the steps provided by the application.
5.) Wait for it to install. Done.
The file you download must start with 2.xx because that is Froyo (Android 2.2) and that will overwrite your Hboot and remove the root access.
Hit thanks if I helped you.

I think if you do a nand backup before rooting, just restore it with clockworld

smokzye said:
1.) Create a Gold Card. Follow this guide: http://android.modaco.com/content/general-discussion/305672/creating-a-goldcard/.
2.) Download a RUU that fits your demands and make sure it starts with 2.xx from here: http://shipped-roms.com/index.php?category=android&model=Buzz. I recommend you to download this one: http://shipped-roms.com/download.php?category=android&model=Buzz&file=RUU_Buzz_Froyo_HTC_WWE_2_22_405_1_Radio_13_55_55_24H_3_35_20_10_release_160191_signed.exe because that one is indicated WWE, so it should work world wide.
3.) Install it on your phone using PC. (The file you downloaded should be .exe so you just have to plug your phone to PC in charge only mode and start the .exe you downloaded).
4.) Follow the steps provided by the application.
5.) Wait for it to install. Done.
The file you download must start with 2.xx because that is Froyo (Android 2.2) and that will overwrite your Hboot and remove the root access.
Hit thanks if I helped you.
Click to expand...
Click to collapse
This should help
I am right now looking at the gold card and I need a spare micro SD? Can this be done on the standard phone SD or does it need to be on the micro SD?
Also if I just found the newer version of android and kept the root and flashed the updated rom onto my phone, i know it would still be rooted but it'd be like a normal phone again.. right?

Pulling my hair out now.
This is so frustrating.
I cant download a .zip to the phone as it aborts and I can't flash the standard RUU because I don't have a gold card thing?
I don't know whether or not its safe to use my phone SD card or do I need a new one?
Surely theres a simple way around this! I.e Download and flashing the standard rom to the phone and it just working? I am on the standard ROM now with root, I am happy to have the root I just want the updated firmware!

What happened to your Clockworkmod Recovery? You might want to get that back, because it is the only way you can then install Zip files. Can you provide more details? Is your Wildfire S-OFF? Are you on Android 2.1?
Refer Part 5 of the 1st post of this thread:
http://forum.xda-developers.com/showthread.php?t=1029318
The Safe Flash ZIPs of all Froyo RUU's is what you should be looking at. They are the untouched stock Froyo ROM, with only the bootloader and radio removed. But, you'll obviously need Clockworkmod Recovery to run it.

3xeno said:
What happened to your Clockworkmod Recovery? You might want to get that back, because it is the only way you can then install Zip files. Can you provide more details? Is your Wildfire S-OFF? Are you on Android 2.1?
Refer Part 5 of the 1st post of this thread:
http://forum.xda-developers.com/showthread.php?t=1029318
The Safe Flash ZIPs of all Froyo RUU's is what you should be looking at. They are the untouched stock Froyo ROM, with only the bootloader and radio removed. But, you'll obviously need Clockworkmod Recovery to run it.
Click to expand...
Click to collapse
I don't know, how would I find out? I recovered back to december when my phone didn't have clockworkmod. It was just rooted.
So do I need to reflash the clockworkmod onto my phone? Or is there a way of getting it back?
What is S-OFF? (Sorry..) and yeah, I think it's 2.1.
So once I get clockworkmod and run a RUU with a stock rom on it, It will be gone of the clockworkmod rom? And the root? or just the rom?
Thanks!

Interesting how you have root without Clockworkmod. AFAIK, its not possible. Do you see a Superuser Icon on your App Drawer?
If you are still on 2.1, to get back Clockworkmod, you will have to use Unrevoked. Guide here:
http://forum.xda-developers.com/showthread.php?t=824396
Also, if your ultimate goal is removing Clockworkmod and Root and getting official 2.2.1, dont bother with getting Clockworkmod. Just make a Goldcard and flash the RUU then. Yes, flashing an RUU will remove root and Clockworkmod. Also, Goldcards can be any SDCard, including the one included with the phone. But, before using it as a Goldcard, make sure to take a backup because it will have to be formattted.

Tbh, my overall goal was just to get rid of the ROM as it was buggy, and got worse and worse to the extent I couldn't take or watch videos, crashed a lot, etc. etc. Wouldn't download from the market half the time
I'm happy to just leave it rooted, I just want the easiest option to getting the latest update and having the phone "normal" again
I will try what you have said in the first option, if not i'll use my SD card and get cracking

http://forum.xda-developers.com/showthread.php?t=788776
Can I use that to get unrevoked?
I still have the root, is that clockworkmod? As in, I hold down the volume down key and get the menu, I just don't know what to do with it.. Does that help?

Yes, I would recommend that as well. Simply clockworkmod and root will not affect or detract from the stock experience of your phone at all. Also, it will leave the door open for future modifications and customization, if the need arises.
EDIT: Yes you can use that guide as well. Same thing really. Clockworkmod and Root are two different things. Clockworkmod is a Custom Recovery (When you hold down Vol Down and Power Button, Navigate to RECOVERY using the Volume Key, and Press the Power Button on the RECOVERY word. If Clockworkmod opens, you have it. If it doesn't , and you get an image of an Android with a Red Triangle, you haven't got it).
Root is simply the presence of the Superuser binary, and can be determined by the fact if you have a "Superuser" icon in your main app drawer.

smokzye said:
1.) Create a Gold Card. Follow this guide: http://android.modaco.com/content/general-discussion/305672/creating-a-goldcard/.
2.) Download a RUU that fits your demands and make sure it starts with 2.xx from here: http://shipped-roms.com/index.php?category=android&model=Buzz. I recommend you to download this one: http://shipped-roms.com/download.php?category=android&model=Buzz&file=RUU_Buzz_Froyo_HTC_WWE_2_22_405_1_Radio_13_55_55_24H_3_35_20_10_release_160191_signed.exe because that one is indicated WWE, so it should work world wide.
3.) Install it on your phone using PC. (The file you downloaded should be .exe so you just have to plug your phone to PC in charge only mode and start the .exe you downloaded).
4.) Follow the steps provided by the application.
5.) Wait for it to install. Done.
The file you download must start with 2.xx because that is Froyo (Android 2.2) and that will overwrite your Hboot and remove the root access.
Hit thanks if I helped you.
Click to expand...
Click to collapse
Ok I spent the time to go through this properly step by step and search for the stuff that made no sense in making a gold card and finally! I'm done.
Thanks a lot for all your help Just now waiting for it to register that theres an update so I can have the latest android firmware again as i'm still running on what it was on when I bought it haha

[GUIDE]complete detailed guide to downgrade from 2.37 to 1.32

hi guys
yesterday i have successfully downgraded my dhd indian version from 2.37 to 1.32
i created and saved my own notes for furture reference by collecting from various posts
i am uploading those tutorial and also tools required
all the source links and links to roms are in the text files
no need to thank me
if u want to give credits thank "roy_hui" , "CuBz90" ,"jkoljo" becuase my notes are clubbed from their posts
source:
http://forum.xda-developers.com/showpost.php?p=10428927&postcount=1
http://forum.xda-developers.com/showpost.php?p=15290453&postcount=1828
http://forum.xda-developers.com/showpost.php?p=15274987&postcount=8
next to root and flash custom rom best guide is in this post
http://forum.xda-developers.com/showthread.php?p=11557769
thank you every dev who are working very hard
VERSION WHICH ARE CONFIRMED AS DOWGRADED USING THIS PROCESS
2.37.720.3-DHD INDIAN VERSION

how about 2.42?

Do we need to make a gold card for unlocked and un branded DHD too.
I have an unlocked unbranded indian DHD.
Pls reply

I ve unbranded dhd with s-off running gb build 2.37.
do I need to make goldcard ?
mechanical engineer

zdwyww said:
how about 2.42?
Click to expand...
Click to collapse
i dont have 2.42 version in my phone mate
so i am not sure
but try it once nothing to loose
just make a gold card as said in file attached using some spare microsd
after making goldcard u can again use u r microsd normally
so just make a gold card and copy the rom into the sd root
if the rom is flashed then every thing is fine
if doesnt work u will recieve a notification called
"update failed
"CID incorrect"

ckranjan said:
Do we need to make a gold card for unlocked and un branded DHD too.
I have an unlocked unbranded indian DHD.
Pls reply
Click to expand...
Click to collapse
mine is also same unlocked and unbraded indian DHD
BUT had aN error "update failed" and "incorrect CID" PREVIOUSLY
so to be on safe side and not wasting time create a gold card it just takes 5 min most

gagan01 said:
I ve unbranded dhd with s-off running gb build 2.37.
do I need to make goldcard ?
mechanical engineer
Click to expand...
Click to collapse
i think there is no need all this procedure for u because u r already s-off
try once gingerbreak app to root
if it doest work
then follow this procedure

thanks
THanks foir the help

Stinger696 said:
THanks foir the help
Click to expand...
Click to collapse
you r welcome
by the way please post u r stock version so people can know which all can be downgraded

Thanks karthik
Full guide now here
http://forum.xda-developers.com/showthread.php?t=1152233

I used gingerbreak it didn't worked
mechanical engineer

gagan01 said:
I used gingerbreak it didn't worked
mechanical engineer
Click to expand...
Click to collapse
then download those text files and tools folder in the attachements and follow that

can someone please help?
i'm stuck in the beginning itself.
whenever i try to put the Downgrade_v2.zip in C:\ drive it gives an "Error 0x80070522 : A required privilege is not held by the client."
so i'm not able to put the Downgrade_v2.zip in C:\ drive.
Is there any other way to use cmd.exe to locate the Downgrade_v2.zip file as cmd.exe doesn't recognise the downgrade file at any other place on computer.
plz help !!! its urgent !!!
edited...
i guess i did it from the desktop itself.
no need to put the file in C:\ drive

try your desk top folder. then when extracting just make sure you know where to find the files.

Help !!!plz its urgent. !!!
i am using root manager for the first time.
i successfully downgraded my desire hd. installed visionary and did the permanent root.
did the radio S-OFF successfully.
tried the Eng S-off but failed.rebooted the phone.
i checked it with root checker application and it showed that i have rooted my phone.
i installed rom manager and flashed clockmod recovery successfully.
now i put my leedroid rom on the sd card and press "reboot in recovery" in rom manager.
my desire hd boots up and what i get is a phone icon with a red triangle with a red exclamation mark on it .
i removed the battery and restarted my phone.
this time i press the power and volume down button.
i go down to recovery mode and click it on the bootloader screen.
again the same phone icon with a red triangle with a red exclamation mark.
no button works and i have to remove battery again.
What should i do now ???
i'm totally stuck.

your CWM Recovery didn't flash successfully. Next time don't pull your battery press volume down and hold then press power button. it will show you a menu that allows you to reboot your DHD.
Try to reboot your DHD holding the volume down button until the boot loader appears. chech that the first line has something that says
ENG S-OFF or in my case the whole line was
ACE PVT SHIP S-OFF RL
then reboot the phone and flash recovery I believe you have to have Radio S-OFF to be able to flash recovery.
did you use the one-click easy S-OFF and one-click Radio S-OFF tool. if not try to search for this in the forums. I believe they are by jkoljo. This worked for me like a charm. happy ROM-ming.

I rooted DHD any shiprom. No need to downgrade...

I think u flashed successfully the cwm.. why do u want to install custom Rom by traditional method just go to Rom manager from there download ur Rom and click on it.. Rom manager ll do the job for u ... K.I.S.S.
mechanical engineer

Root DHD with any RUU Shiprom: http://forum.xda-developers.com/showthread.php?t=1155206

gagan01 said:
I think u flashed successfully the cwm.. why do u want to install custom Rom by traditional method just go to Rom manager from there download ur Rom and click on it.. Rom manager ll do the job for u ... K.I.S.S.
mechanical engineer
Click to expand...
Click to collapse
CWM has a different logo I think it is/was an android guy on a skateboard. whereas stock recovery is a triangle with exclamation point inside. So it means something went wrong when he flashed his CWM and would lead me to believe that his S-OFF process went awry. So checking S-OFF is easy. Reboot to bootloader and the info is on the first line.
Cheers