touchscreen was working today morning, took battery out for 2 hours, turned it back on and it was working abit weird, and now i cant press any touchscreen buttons atall!
So no softkeys (pick call, home etc.) and nothining on the big screen! I can turn on the phone, press the power button and volume buttons, see my home screen get calls etc.. hard reset twice, took battery out, nothing does it .. gonna try flash it but dont think itll do it ... and ideas?
Im in uk aswell if that makes a diff
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
I had the same thing, a oily spot, but it was there for months, then i noticed another new spot (looked like a tiny tiny burn) and thats when it stopped working completely... ive ordered a new screen which should be comming in a few days, im hoping thats the issue
will let you know if it works ....
keep me updated if you find anything
thanks!
NECROSTONE said:
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
Click to expand...
Click to collapse
download and install this _HTC Touch HD_TouchHD system.exe
BOLDESH said:
download and install this _HTC Touch HD_TouchHD system.exe
Click to expand...
Click to collapse
whats it do? and where from??
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
ok basically i received a new digitizer today (the actual touchscreen) ...
i dismantled the whole phone using the service manual and some video some guy made (VERY HELPFUL, if anyone wants it for any reason i can post a link), ok so i got rid of all the top bits, the circuit boards (or watever theyre called)
I got down to just the bezel, lcd and digitizer (dont know what a bezel is, the lcd is where the display actually is and digitizer is directly stuck ontop of that)
Apparently when replacing the screen, htc have made it so that you have to replace all three of those parts instead of individual ones, but you can buy them seperately so i thought i'd hero it.
i poked out the screen from the frame (some chewingum like stuff holding it in) then i started peeling off the digitizer (if you get one and want to try it you'll know where to peel) ... this was a mistake tho cause the lcd is unbelievebly sensitive so while peeling off it left scratches on the lcd, and me not knowing the lcd is sticky tried to wipe them and use a dust free cloth, which left alot of crap on the actual lcd!
i managed to get the digitizer off and ripped the cable that goes from digitizer to whatever reads our fingers on the screen, took it all off, placed the new one directly ontop and fed the wire exactly how it was for the first screen.
Put it all together again
Now I did mess up my screen badly, but in a good way! .. i now have full touchscreen working (smoother than ever) but my LCD display is near enough gone, so it looks like the screens really really dark, and i have to tilt it at certain angles to see the screen..
After all of this i now have a touch hd i can controll from my pc (using mymobiler) so i can recieve calls, send texts all from my pc when connected thru active sync, can even play teeter ... but not really the same!
I wouldnt recomend anyone to try what i did, although i think its worth the risk as I would have to replace the lcd anyways if i wanted a new screen in the first place... and who knows you might be able to peel the digitizer off clean (NEVER EVER EVER TOUCH LCD WITH ANYTHING!!!).
It all cost me around 10-15£ for the digitizer and screwdrivers and alot of hours dismantling phone compared to 50-100£ for a new lcd.
I am either going to get a new lcd now so i can actually see the screen, or get a new phone.
Sorry for the essay but hopefully this helps someone in any similar situation
if i do get a new lcd will post how it goes and if it sorts out everything
if anyone knows of any other reasons why my lcd would be so dim (brightness is 100%) accept for me getting carried away with it ... help would be appreciated
the_cool said:
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
Click to expand...
Click to collapse
Yeah swirly oil marks is how myne started ... i think i finished off the screen by trying to press hard on the mark to try and clear it .. . so be careful with it.. but think that overall the screen had seen better days (course only a few weeks after warrenty finishes) ... all conections inside were ok aswell
doczyus said:
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
Click to expand...
Click to collapse
Same here. Touch screen not working. Phone never flashed, droped,...
Any solution?
unfortunately, a friend of mine changed the touchscreen without success. Phone was in perfect state, no drop, no flash. Just the touch not responding. I'm not sure that changing whole part lcd+digitizer solve the problem.
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
igothtc2 said:
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
Click to expand...
Click to collapse
use ScreenCal to fix it, hopefully it can help you
Hakim Rahman said:
use ScreenCal to fix it, hopefully it can help you
Click to expand...
Click to collapse
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
igothtc2 said:
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
Click to expand...
Click to collapse
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Hakim Rahman said:
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Click to expand...
Click to collapse
Just did the hard reset. When it asked me to align the screen, I just couldn't align the top left corner. I had to press it like 50 times before cross went to the lower corner. Otherwise, after the align it's good for about couple of seconds and then it's just pressing all over.
I thought I had just some software issues because the screen wasn't dead, it responded to my touch. So, I'll probably have to buy a new screen and digitizer, right? Or do you have any other ideas?
Thank you again for your help!
Regards
firstly screencal installs calibration settings not for blackstone so do not install it, no point. (btw it also increases device touch sensitivity)
secondly you guys should try and install the calibration settings for blackstone, basicly what the align screen does, not sure where to find them for download but i could post the registrys if someone wants to make a .cab from them. (atm i cba making the .cab but i am able to do it )
if the calibration settings do not work i think it is best to buy a new lcd package (or buy new device and give me old one for spares oj)
Rn
hi buddy ! What you mean GSensorCalibrator ??
i didnt mention anything about gsensor calibration dude.
tried and tested screencal the other week and it screwed my blackstone.
install these instead:
*screen calibration, sets the blackstone touch points: (aligning the screen)
if you install a cab with these registrys it should fix the alignment problem.
(if it doesnt then its hardware issue = lcd etc)
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:8
"CalibrationData"="511,542 183,881 183,198 834,197 833,880"
*this one will maximise the touch sensitivity for those that want it:
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:0
Rn
Does anyone have a recommendation where you can buy a digitizer and lcd from?
Howdy folks... i will try to get a picture up tomorrow...
Basically a few days ago i picked up my phone and noticed a marble type effect on my screen, very similar to when you put inks into water etc.
At first i thought the lcd screen had leaked etc but my (actual) screen looks normal, no missing pixels or screen errors
It happened again few days later and then this morning my gf removed it from her pocket the whole touch area was like it... and still is now... 10 hours later...
Could water or moisture build up between the touch part and then screen???
During the time it happens the touch area doens't function at all!!
Any ideas or thoughts at all??
Thank you all very much in advance!!
dont know, but this happeded on my touch ELF and is happning on my touch 3g now, not happy might try a few crazy things before replacing the digitiser il let you know if anything works.
Heres a pic attached...
Cant really see it but maybe help to see the issue?
Can kinda see the outline of where the marble effect starts... and you can see the purple and lights green/blue effect its left..
I wouldn't mind but the touch screen doesn't work kinda making the phone useless!
tried a few things, like freezing than heating, worked for a while, calibration kept falling out. put it away and went back to my elf. tried it yesterday and it hardly responds to touch at all, responds randomly when you press it haaaaaaarrrddd.
might be time to get new parts
Looks like the touch screen sensors are out of sort. My experience with my previous model (HTC Kaiser) similar thing happened. Changing the screen solved everything, works like new.
I had problems with the touch screen on my touch 3g and tryed everything (hard restarts, screen aligns, millions of times) until i changed the digitiser in htc service and everything works fine now, like new as azahidi said. Good luck.
Has anyone else found that occasionally the screen starts going mad? I will unlock the phone and suddenly it starts going into various menu options, brings up a browser or brings up widget settings. It's as if there is an invisible finger using the screen, although it's so fast it's as if there is a buffer of actions.
I'm not sure what causes it, but a colleague has a Samsung Galaxy and reckons he gets it when moisture gets on the screen. My screen has never been wet or near anything wet.
Additionally, I've noticed it was happening just now when I was charging the phone via USB. When I unplugged it the behaviour stopped.
Anyone else?
Yao
Never had that before , maybe a application you installed that is acting wierd?
I had a application installed that just drained my batt like hell.
I also reboot the phone after heavy duty, meaning using the explorer , games, ....
me too!
I'm getting the same problem at the moment. It takes me about 5 attempts to unlock the screen. Once I'm in, sometimes it responds to my touch, sometimes it doesn't, other times it just does random stuff. It's making the phone totally unusable .
I got the phone on Monday (3 days ago) this is the first time it happened. I'm sat in a cafe atm and it's quite humid in here; if it's a problem with moisture could the humidity explain it?
I once had a similar problem with an ipod touch after it had been in a bag with a leaking water bottle. It went OK by itself after a few hours.
Anybody else got any thoughts?
Thanks
Damian.
The thing that I had to get used to was gripping the phone properly. The lower right quarter of my right hand is a bit chubby, so when I gripped the phone my palm ended up wrapping around the phone and resting on the screen somewhat. This would result in the screen not always unlocking right, sometimes selecting widgets and icons on my homescreen, restricting scrolling in the browser and random text entry.
Since I've altered my grip I don't get those problems any more.
My tattoo does this all the time....
Looks like exposing the phone to extreme conditions like heat or humidity makes this...
I used to keep my phone next to my Burning furnace i7 HP laptop and there is an LCD leak now on the screen :-(...since i noticed the leak, the phone started behaving more cranky....
update ...
Just to give an update, my phone is OK again now. By the time I got home a few hours later it had sorted itself out.
It's a HTC Desire HD, btw.
Damian
I had the same problem when I used a non-HTC charger.
Same problem here happens when charging with the original charger, when tyring another HTC charger with the same model number the problem is gone.
My guess is the charger that came with the phone is defective.
A workaround: I'm using a case for my DHD, when this problem happens I can get the screen to act normal by keeping the phones body (metal part) in direct contact with my hand.
Hello,
I've been having touch screen issues lately, since i rooted and switched to CM 6.1 a couple of weeks ago. The screen will work perfectly for a little while, but will inevitably stop responding. I'm using launcherpro, though i don't believe that's the issue- it happens regardless of which launcher I'm running (I've tried others and experienced the same issue. The optical scroll pad will still "sort of" work- better than the screen (which will respond to the occasional touch after the problem begins, but barely does). If I reboot, the problem will usually go away for a while again, but will recur. I wind up needing to fix the issue once or twice a day. I don't think it's a hardware problem because the reset fixes it, so I assume it is then software. Also, i don't remember having this problem with the stock rom. Has anyone else experienced this, or does anyone have any ideas?
Thanks!
Dunno how useful this will be, but have you tried reflashing CM?
Sent from my T-Mobile G2 using XDA App
Same problem here. But I've noticed sometimes if I'm using the phone not in my hand (on car dock or just on table) this problem seems to happen more...but when I hold it in my palm then works fine.
But sometimes it just becomes unresponsive. Am running virtous's rom on my g2. But I can remember having the same issue when running cm on my g1 days too. Reboot always fixed it, just gets annoying.
Anyone have fixes to this? Thanks!!
Sent from my HTC Vision using XDA App
I personally use GV 7 or sparksmod and. Never had a problem, these are the best roms I think for this phone.
Sent from my HTC Vision using XDA App
Been having this exact problem for weeks now. And I believe it is a hardware problem, probably some sort of short in one of the ribbon cables or the digitizer itself. Occasionally, actually 85% of the time I'd try to open an apparently and the phone would act if I held my finger down and then the apparently icon gets selected...very annoying cus it happens over and over a couple times, all I can do is keep trying until it does what its supposed to. Also with the on screen keyboard when I'm texting it'll act like I'm holding down on one of the letters and keeps bringing up the special characters to that letter...or ill tap delete to delete a spelling error and it'll end up holding it down and deleting my whole damn text and I can't stop it.
At first when this first started happening I could simply tap the screen and it would stop the crap it was doing and work fine. As time went on I noticed I kept having to hit it harder and harder for it to correct it. Wellllll guess what? Last night it was acting up horribly and I slammed my closed hand against it while it was on the desk and it cracked the LCD screen and now the phone is completely useless, even though the outer touchscreen is perfectly fine.
The restarting of the phone also usually fixed it for me as well but only for a few minutes.. which also makes me think its a short because after the phone is turned off whatever part is shorting out, that circuit is closed and just takes time until you press on the screen in whatever spot to cause the two parts to touch and create the short all over again.
Anyways that's my story...just don't get angry and slam down on the screen lol. This is my 2nd G2 and I'm tired of it, probably just going to get a nexus s or just go back to the nexus one, atleast it was reliable.
huh28 said:
Same problem here. But I've noticed sometimes if I'm using the phone not in my hand (on car dock or just on table) this problem seems to happen more...but when I hold it in my palm then works fine.
But sometimes it just becomes unresponsive. Am running virtous's rom on my g2. But I can remember having the same issue when running cm on my g1 days too. Reboot always fixed it, just gets annoying.
Anyone have fixes to this? Thanks!!
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
if you open the battery cover u can see that there are connectors that closes the whole circuit, so when u are holding the phone the back cover works like a grounding area that makes the screen responce to your touch. Acapacitive screen works like this: when you touch in any area on the screen, you simply are breaking the electrical field that the screen has, the screen "feels" where u break it and tells the operating system.
the electrical field depends on the human body a bit to make the circuit complete, so when u touch the metal parts of the phone, the screen works like it is designed.
Anyone having touch screen only issues? There's not a single crack on screen, I've always treated the phone very well.
I'm thinking whether I should replace the whole front, but curiously only my touch screen is not working, display is OK and works well using SideSync. Also, the entire touch screen starts working at random times (I haven't been able to figure out the conditions, it's not hot/cold or pressure; I've used a hair dryer, a refrigerator and heavy items on top of it).
In fact, it worked for a month after it started malfunctioning (initially it didn't work for some hours, and then worked again). But now it got worse again. It's not software as I've tried XtreStoLite and now I'm back to stock. Should I replace the whole thing?
Oh, I have the G900H.
Sounds like a bad digitizer. It would be wise to shop for a new one before it goes out completely.