Related
hi mithun, mUNS , ABEBRAKER , very sad man..! i was trying to update to WM6.1 now the phone is stuck in boot logger screen...! nothing else happeninig ..! any idea whT TO O....?
Gene stuck on boot logger , pics & video attached
This is how scary it becomes....
gene stuck
now it shows the colour screen after i press and hold power and camera keys...!but flashing gets interupted in 2 % saying image is corrupted ... i dont have the original rom....
bryangopan said:
now it shows the colour screen after i press and hold power and camera keys...!but flashing gets interupted in 2 % saying image is corrupted ... i dont have the original rom....
Click to expand...
Click to collapse
do some search before you open up a new thread brother. anyways, here's a possible solution (you may have to try it out coz i never found myself in this situation)
this thread (http://forum.xda-developers.com/showthread.php?t=366505) has one solution (http://forum.xda-developers.com/showpost.php?p=1915254&postcount=5) from orefkov which may help or this thread (http://forum.xda-developers.com/showthread.php?t=351234) from nirvana might help too
hope this helps in recovering your gene. also i suggest going further, you should get into flashing or cooking only if you know what you doing
gene boot issue
Man as you know i am already running wm6 by muns ...! so that means i have done it before... this is really strange ..! i was worried. I am stilll worried...let me go through ure links...i'll let you know..!
Thank you
Stuck from boot loader resolved
Man i called htc service centre here in bangalore , they gave me a simple solution for my problem...
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Wow ! Now this is what i call "life saving medicine". Thanks for giving it !
I am referring to Ghost image.What exactly it is and is it safe even after flashing ? Finally what is power cycle(Is it complete discharge of backup battery).
Thanks again buddy
P.S. Can u give HTC Bangalore number. Thanks.
rex4u said:
Wow ! Now this is what i call "life saving medicine". Thanks for giving it !
I am referring to Ghost image.What exactly it is and is it safe even after flashing ? Finally what is power cycle(Is it complete discharge of backup battery).
Thanks again buddy
P.S. Can u give HTC Bangalore number. Thanks.
Click to expand...
Click to collapse
refer to my you tube video buddy , all info is given there ...
http://www.youtube.com/watch?v=R53104JTgNI
Thanks a lot buddy to take up so much of pain and posting this video.
Can I ask a little favour - plz post this video here so that I can download it and keep it.Embarassingly my net is extremely slow so I could not watch it smoothly.
Plz if u can.
Thanks once again bro'.
rex4u said:
Thanks a lot buddy to take up so much of pain and posting this video.
Can I ask a little favour - plz post this video here so that I can download it and keep it.Embarassingly my net is extremely slow so I could not watch it smoothly.
Plz if u can.
Thanks once again bro'.
Click to expand...
Click to collapse
will do that soon
Tnx
bryangopan said:
Man i called htc service centre here in bangalore , they gave me a simple solution for my problem...
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Click to expand...
Click to collapse
TNX buddy for sharing this information ..I also face this problem today but as I already read ur post ..I knw wat to do ..tnx man
i faced error INVALID VENDER ID when flashing at 2%
i don't know how to upgrade please help me
i have the same err
snggwt said:
i don't know how to upgrade please help me
Click to expand...
Click to collapse
I guess your spl is giving you the trouble. search for olipro"s CID unlock file , you should be ok after this .
How can one make sure that the battery is more than 50% charged when the phone is showing the bootloader screen... If I keep it for charging in that state, does it get charged?
Please help
Start the phone in bootloader without connecting the cable. NOw press the powerbutton for a while to shutdown the phone completely. Then plugin the cable or charger, it will start charging without getting started. Charge it for sometime, or to be on the saferside, untill the light turns into gree from amber.
@bryabgopan just a road down memory lane for u
hi
i dont know if u remember long time when i sent a PM to u asking help to upgrade my 3400i u gave me a very rude reply and said its not rocket science and to look around but i see u asking for help
so its different when u need help and some one else asks u for the same im saying this because ur words then really hurt me its happened around 3-4 months back
so my humble request to u is if u cant or dont want to help just say it in a nice manner and not in a rude manner see u wanted help and u can see people trying to help u here
bryangopan said:
Man i called htc service centre here in bangalore , they gave me a simple solution for my problem...
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Click to expand...
Click to collapse
krazy_about_technology said:
Start the phone in bootloader without connecting the cable. NOw press the powerbutton for a while to shutdown the phone completely. Then plugin the cable or charger, it will start charging without getting started. Charge it for sometime, or to be on the saferside, untill the light turns into gree from amber.
Click to expand...
Click to collapse
LOL you are even answering to pple posting in the wrong Section
Hard Reset not working HTC P3400
I have Hard Reset my HTC P3400,but it hangs on the boot screen.
It show on the screen as,
ONBL 1.07.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.9.1.1
I kept the mobile on battery for at leats 5 minutes but no success.
What do i do now ?
manisharma31 said:
I have Hard Reset my HTC P3400,but it hangs on the boot screen.
It show on the screen as,
ONBL 1.07.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.9.1.1
I kept the mobile on battery for at leats 5 minutes but no success.
What do i do now ?
Click to expand...
Click to collapse
hi
try this
if ur phone comes on connect the USB cable to phone and see if u get the USB words on the phone if so good try flashing any other rom from ur PC to ur phone
goodluck
hi, i have a htc magic/sapphire phone, after downloading and updating from sd card (update.zip) my phone cant turn on when i'm press the power on key. and i cant recognize it on my compuiter via usb, so my computer is't connet to my htc magic from usb.
all of i can know about short keys (home+end, back+end) not responding correctly
when i'm press trackball+end a have a BLUE LED(not green) on top of my phone
what can i do
please. tell me what can do for turning on my phone, thanks
i have a similar problem!!!! help me!!
Same problem me too... I tried splhard1_update_signed.zip
But when I restart... nothing!!! The magic doesn't start up... I have only a bad uggly black screen...
Tried : HOME+POWER, HOME+POWER+BACK; POWER+VOLDOWN
But nothing... ideas??
Hey anyone can help me?
Maybe unmodified Magic cannot run updates? Have a look at the "Sapphire android development" forum for the "daldroid" custom rom or others
Just a follow-up to my above post:
My reasoning comes from this post:
http://forum.xda-developers.com/showpost.php?p=3948652&postcount=220
From reading the procedure of successfully flashing another ROM, it looks like you need a recovery image first.
I've got a "Brick" HTC Magic - Vodafone.
Basically, when i press the power button doesn't start. It happened after follow the "Install / Update SPL" ( http://code.google.com/p/android-roms/wiki/SPL ) guide.
Is there any way to recover it? or should i put it on the bin?
You're going to have to be more specific than "it doesn't start".
Does it turn on? If so, does it hang at the htc magic screen? Can you hold vol-down and press power (while still holding vol-down) and load a screen with three androids on skateboards? If you can do the last step, it's not bricked, and you should look at the thread I have below about bricking and semi bricking, one of the users on there gave a great amount of information on what you can do if your phone's not working right (bricked).
Caid.
444
Caid444 said:
You're going to have to be more specific than "it doesn't start".
Does it turn on? If so, does it hang at the htc magic screen? Can you hold vol-down and press power (while still holding vol-down) and load a screen with three androids on skateboards? If you can do the last step, it's not bricked, and you should look at the thread I have below about bricking and semi bricking, one of the users on there gave a great amount of information on what you can do if your phone's not working right (bricked).
Caid.
444
Click to expand...
Click to collapse
Hi Caid, thanks for the reply! sorry for the short message without details.
Here is the answer for your first question (sadly, the rest of questions can be skipped):
Does it turn on?
It doesn't
It was after follow the guide i mentioned before. I tried to update the SPL, but something went wrong and my phone didn't turn on again.
So... I think I have to accept the fact is not going to work again.
Is there any kind of service able to fix this?
Anibal
No display at all? no backlight on the screen? no vibration (signifying it's past a certain point in the loading stage)?
You probably tried taking out the battery for 10 seconds and then putting it back?
As Caid444 asked, tried holding Back+Power for a few seconds (after making sure power is off and not just hanging. Take off battery for 10 sec and reload)? Tried holding Home+Power after making sure power is off?
please i need some help htc touche cruise
hi everyone. I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help
parrot5 said:
No display at all? no backlight on the screen? no vibration (signifying it's past a certain point in the loading stage)?
You probably tried taking out the battery for 10 seconds and then putting it back?
As Caid444 asked, tried holding Back+Power for a few seconds (after making sure power is off and not just hanging. Take off battery for 10 sec and reload)? Tried holding Home+Power after making sure power is off?
Click to expand...
Click to collapse
I'd really like to say it DOES something... but it doesn't . I tried Volume down + power, back + power and several more combination always taking out the battery and putting it back.
It's bad... Do u know if there's any hardware service for this?
Just a wild guess, but since the phone sucks more battery, then a vampyre on rampage.
Could it be an idea, to charge the battery before, or have the usb cable pluged in, when you press back+home? (the same buttons you used to enter fastboot)
I'm pretty sure what you're trying to say is, you know enough about the phone to know how to bring it into it's multiple boot options, and none of them make the phone even burp. So there's no need to tell you to press this button plus that button, or insert usb or remove usb, or battery or such, because you've already done all that.
Well, I'd have to agree with you that it's dead. Unfortunately, there's nothing to do at the moment. I'm guessing (or maybe just hoping) that in the future there will be an unbricker for our phone, much like those available for many htc branded winmo phones. In the meantime, how old is your phone? Can you still bring it back?
Caid.
444
p.s To anyone else who's trying to figure this out, let's assume that he's already tried the many variations of recovery procedures and that it's still not working.
argc79 said:
I've got a "Brick" HTC Magic - Vodafone.
Basically, when i press the power button doesn't start. It happened after follow the "Install / Update SPL" ( http://code.google.com/p/android-roms/wiki/SPL ) guide.
Is there any way to recover it? or should i put it on the bin?
Click to expand...
Click to collapse
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade? (I hope you didn't try to flash a G1 SPL on your Magic...).
Amon_RA said:
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade?
(I hope you didn't try to flash a G1 SPL on your Magic...).
Click to expand...
Click to collapse
That's how my brick arrived ! Tried Hard SPL, after installing the one you suggested. Yours okay, Hard SPL no. But even after installing the spl, no fastboot adb.
BRICKED by HARD SPL ( the recommended )
Same here, I have just bricked my new vodafone HTC Magic (Vaffanc...)
downloaded from here: http://code.google.com/p/android-roms/downloads/list?q=label:SPL
I hope something can be done. It is not reacting to power button at all.
Amon_RA said:
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade? (I hope you didn't try to flash a G1 SPL on your Magic...).
Click to expand...
Click to collapse
I think you are right, I have flashed the G1 SPL. But the page is really not clear, it start speaking as Dream/Magic and probably it is only for Dream. Since it says to apply the Hard Spl and in the download link(http://code.google.com/p/android-roms/wiki/SPL) there is no clue that it is not for the G2.
Any idea? anybody got it changed from the shop with no problems? (mine is vodafone in the netherlands)
Me idiot, I have to leave tomorrow for holidays!
byronhero said:
I think you are right, I have flashed the G1 SPL. But the page is really not clear, it start speaking as Dream/Magic and probably it is only for Dream. Since it says to apply the Hard Spl and in the download link(http://code.google.com/p/android-roms/wiki/SPL) there is no clue that it is not for the G2.
Any idea? anybody got it changed from the shop with no problems? (mine is vodafone in the netherlands)
Me idiot, I have to leave tomorrow for holidays!
Click to expand...
Click to collapse
as far as i can see no need to flash spl on vodafone magic. i have the same phone and all i did was root with Rav1.1.1G.img and flashed rom of my choice. you have flashed phone with g1 spl and it actually says g1 on the link you provided..........can't see how you missed it. with phone off press home+power button as that bring up recovery image. Rav image file is safer due to that. i am sure if hardspl was available for Magic it would be posted on here as a sticky
hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana
thanant said:
hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana
Click to expand...
Click to collapse
You did brick one with the hardSPL and now you bricked another with the same stuff? Didn't you learn the first time? Only way is to go back to the store and tell em you did it again.
thanant said:
hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana
Click to expand...
Click to collapse
It seems to me you need to go back to basics and start here
A noob question but what exactly does flashing a new SPL unlock.
I got my Vodafone UK HTC magic and simply Downloaded a 32B ROM and used nandroid backup to apply the update.zip and it installed fine and can use Root required apps.
hi all
My HTC magic was bricked after update SPL. Now when press power button, it stuck at HTC magic logo, anyone have solution for fix its?
I Can not understand how can this be possible. Why guys all of you, don't read before trying to change your SPL???? You even don't need any changes about it?! Why do you try to change the SPL? Do you know what that SPL does? I think most of you - don't.
My next question is why all of you are trying to flash the G1 SPL onto Magic phone? Are you crazy or what? There is NO HARDSPL for Magic (G2, Sapphire or whatever you want to call this device)!
The SPL collection is posted in this forum by Amon_Ra, and if someone want to change the SPL can do this by downloading some of the SPL collections posted here.
say2k said:
hi all
My HTC magic was bricked after update SPL. Now when press power button, it stuck at HTC magic logo, anyone have solution for fix its?
Click to expand...
Click to collapse
Power off your phone! Then press and HOLD the "back button", while holding it press once the red one(which you usually use to power on the phone). It will power on (i hope). If you get in fastboot mode then everything will be fine.
Hello,
A friend has a "not working" HTC Magic (White Vodafone [UK 99% sure]).
Everytime I power on, it goes directly to this screen:
http://i.imagehost.org/0648/Image001.jpg
It has no fastboot, adb, etc.
Tackball and Power key combination gives a black screen and a blue led.
At this thread, http://forum.xda-developers.com/show...&postcount=243, someone told me that it's not really a brick, just in need of a full system image.
I'm trying different sappimg.nbh, recovery.img, update.zip and no good...
Also formatted the sdcard several times.
The phone is capable of recharging through computer (usb) or charger, orange led and green led after fully charged.
Any hints please?
Thanks,
Anthon.
same thing happened to me ..
And I don't know what should I do ..
Yep, me too... http://forum.xda-developers.com/showthread.php?t=644124
Bummer...
I see there's no solution for this through the easy way :S
Let us wait for the JTAG solution.
Thanks for the answers
Best regards,
Anthon.
if one of us can get solution for this please give the information ok ..
Btw, what is JTAG ?
Thanks ,
Felix
Create a Goldcard with Ubuntu and run a RUU. I think that's a solution.
I had almost same problem just different screen was blocked.
here's what did I do:
hxxp://forum.xda-developers.com/showthread.php?t=656798
(replace hxxp to http)
Hi all,
Bought a brand new HTC Trophy from an auction site but has no warranty.
Going to contact HTC to see if they can provide some type of support.
Downloaded Zune and updated the phone fine the first time. It then mentioned another update was available so went through the process.
The last screen on the update said : Waiting for phone to reboot.
Now I watched the phone for over 30 minutes and it was stuck/frozen on the HTC logo when powering on so I switched this off thinking something had happened.
Now I'm unable to even power on the unit, factory hard reset or anything. Has anyone experienced this before?
Regards,
John
Try going on HTC's website and asking their support staff if they will repair it under the general warranty?
Yeah I've emailed HTC but of a language barrier. Kept mentioning to return to my dealer, however I didn't buy it from a dealer. Will see how I go.
Hello,
Make a gold card with the Y cable and unbrand the Trophy, and then put other ROM in it, it will work with Y cable process.
Regards
johna8 said:
Hi all,
Bought a brand new HTC Trophy from an auction site but has no warranty.
Going to contact HTC to see if they can provide some type of support.
Downloaded Zune and updated the phone fine the first time. It then mentioned another update was available so went through the process.
The last screen on the update said : Waiting for phone to reboot.
Now I watched the phone for over 30 minutes and it was stuck/frozen on the HTC logo when powering on so I switched this off thinking something had happened.
Now I'm unable to even power on the unit, factory hard reset or anything. Has anyone experienced this before?
Regards,
John
Click to expand...
Click to collapse
Howdy, I am in the same boat. My HTC Trophy (Verizon brand) comes on and goes to the bootloader screen with red, green, blue and white and thats all it will do. It doesn't even show it's charging. How do I get a rom on this device? I have tried somse roms from ansar but none work> this is actually how it got to **** state of a paper weight. Can someone walk me through step by step how to get my phone working. Thanks
prootc1 said:
Hello,
Make a gold card with the Y cable and unbrand the Trophy, and then put other ROM in it, it will work with Y cable process.
Regards
Click to expand...
Click to collapse
Hi prootc1, you sure? I can't even power on the phone at all. Nothing comes on the screen - it's like a 100% brick with no response?
what is gold card? how can i get an original rom for htc trophy for verizon? phone is stuck in the color screen.
Hello,
I already test on a sticky logo Trophy, and it work.
You need:
1- a Y cable (make or buy one),
2- download the original and oldest ROM for it,
3- Make the gold card to unbrand it and do the process
It should work, say something...
Regards
Any news?
Any news ? I'm exactly in the same case than you Johna... Please give us a feedback...
prootc1 said:
Hello,
I already test on a sticky logo Trophy, and it work.
You need:
1- a Y cable (make or buy one),
2- download the original and oldest ROM for it,
3- Make the gold card to unbrand it and do the process
It should work, say something...
Regards
Click to expand...
Click to collapse
Hi Prootc1, my phone initially had a stuck HTC logo and was forced to power it off. Since then, the phone will not respond to any keys / power on at all. It's pretty much 100% bricked with no responses/leds/lights emitting.
I'm wondering if I do find a repair service that offers JTAG, may be the only way? but this is assuming the phone can be switched off to reflash?
Anyways an update is that I've taken it to our local comms provider who are sending it away for service. Will hear back whether it's under warranty or not.
Hi Prootc1, my phone initially had a stuck HTC logo and was forced to power it off. Since then, the phone will not respond to any keys / power on at all. It's pretty much 100% bricked with no responses/leds/lights emitting.
Click to expand...
Click to collapse
I have the exact same issue
I'm wondering if I do find a repair service that offers JTAG, may be the only way? but this is assuming the phone can be switched off to reflash?
Click to expand...
Click to collapse
Is it possible to do it ourselves?
Anyways an update is that I've taken it to our local comms provider who are sending it away for service. Will hear back whether it's under warranty or not.
Click to expand...
Click to collapse
I've send an email to HTC to describe the case, hope they'll answer soon.
I keep you informed...
hello,
can anyone put in threecolor mode? bootloader?
If yes, then use these instructions.
http://forum.xda-developers.com/showthread.php?p=10176994#post10176994
Regards
can anyone put in threecolor mode? bootloader?
Click to expand...
Click to collapse
No
I guess it's hopeless
Thank's for your help prootc1
Was sent away and have a replaced phone.
Hi, I have boot issues with trophy stuck at boot HTC white screen and nothing else.
When it starts make 4 times vibrate and then nothing.
I can access the 3 color mode but I have try to update and can't connect to pc.
ansar rom problem
Hi Ansar, I have a problem since I did a soft reset htc setting the trophy to leave the factory, made a number of actions to restart, and stayed frozen in the picture there is no step HTC.
Well I'm from Spain to investigate it and I said I'll install the official rom Vodafone Spain
9_22.32.50.10U_by_ansar RUU_Spark_Vodafone_SPA_1.10.164.01_Radio_5.51.09.2
While the flash starts but when it comes to 10%, I get a message Flash Write Error (# 226) @ 12%
and there is no progress, and researched and found this
ERROR [226]: FILE WRITE
This Could Indicate That the downloaded image (. Nbh file) is corrupt, re-download the image.
and I downloaded the image again but nothing
some solution concept .????? thanks from Spain
LEFTKOYL said:
Hi, I have boot issues with trophy stuck at boot HTC white screen and nothing else.
When it starts make 4 times vibrate and then nothing.
I can access the 3 color mode but I have try to update and can't connect to pc.
Click to expand...
Click to collapse
Hey LEFTKOYL,
Can you try the RSPL/HSPL tool?
I've given WickedPenguin a guide which should help you (assuming your on the correct boot loader version)...Get that tri color screen and note down the SPL details.
http://forum.xda-developers.com/showthread.php?t=1207721
I too am having the multi-color screen appearing. I plugged my phone into my computer last night for the first time and it said there was an update. I left it running and came back to a 'failed update' message and this screen. From the pieces I have gathered, from reading in the developer section, it appears I am hosed. There is not a SPL unlock for my model of the Trophy, which apparently goes by the name 'SparkW for Verzion' as well. This was not a pleasent way to start my day.
use this method by ansar
Use this method by Ansar ..
http://forum.xda-developers.com/showthread.php?t=1000656
not that the method are the same but if you are not using HTC vodafone France you can use a different rom from here
http://forum.xda-developers.com/wiki/HTC_Trophy/Shipped_Roms
you can also try the Gold card method too...
If your phone is completely dead .. you can do JTAG brick repair .. if you want someone to do it for you ..you go to mobileTechvideos here :
http://mobiletechvideos.mybigcommerce.com/
you can also use the gold card method here too :
http://forum.xda-developers.com/showthread.php?t=893152
Hope any of this works for you
Enjoy
You can bye me a $2 beer
here https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YWB555YTP6Z42