HTC Magic stuck in recovery (SPL? Radio? Boot?) - myTouch 3G, Magic General

Hello,
A friend has a "not working" HTC Magic (White Vodafone [UK 99% sure]).
Everytime I power on, it goes directly to this screen:
http://i.imagehost.org/0648/Image001.jpg
It has no fastboot, adb, etc.
Tackball and Power key combination gives a black screen and a blue led.
At this thread, http://forum.xda-developers.com/show...&postcount=243, someone told me that it's not really a brick, just in need of a full system image.
I'm trying different sappimg.nbh, recovery.img, update.zip and no good...
Also formatted the sdcard several times.
The phone is capable of recharging through computer (usb) or charger, orange led and green led after fully charged.
Any hints please?
Thanks,
Anthon.

same thing happened to me ..
And I don't know what should I do ..

Yep, me too... http://forum.xda-developers.com/showthread.php?t=644124

Bummer...
I see there's no solution for this through the easy way :S
Let us wait for the JTAG solution.
Thanks for the answers
Best regards,
Anthon.

if one of us can get solution for this please give the information ok ..
Btw, what is JTAG ?
Thanks ,
Felix

Create a Goldcard with Ubuntu and run a RUU. I think that's a solution.
I had almost same problem just different screen was blocked.
here's what did I do:
hxxp://forum.xda-developers.com/showthread.php?t=656798
(replace hxxp to http)

Related

htc magic startup problem after updating

hi, i have a htc magic/sapphire phone, after downloading and updating from sd card (update.zip) my phone cant turn on when i'm press the power on key. and i cant recognize it on my compuiter via usb, so my computer is't connet to my htc magic from usb.
all of i can know about short keys (home+end, back+end) not responding correctly
when i'm press trackball+end a have a BLUE LED(not green) on top of my phone
what can i do
please. tell me what can do for turning on my phone, thanks
i have a similar problem!!!! help me!!
Same problem me too... I tried splhard1_update_signed.zip
But when I restart... nothing!!! The magic doesn't start up... I have only a bad uggly black screen...
Tried : HOME+POWER, HOME+POWER+BACK; POWER+VOLDOWN
But nothing... ideas??
Hey anyone can help me?
Maybe unmodified Magic cannot run updates? Have a look at the "Sapphire android development" forum for the "daldroid" custom rom or others
Just a follow-up to my above post:
My reasoning comes from this post:
http://forum.xda-developers.com/showpost.php?p=3948652&postcount=220
From reading the procedure of successfully flashing another ROM, it looks like you need a recovery image first.

My HTC Magic is bricked

I've got a "Brick" HTC Magic - Vodafone.
Basically, when i press the power button doesn't start. It happened after follow the "Install / Update SPL" ( http://code.google.com/p/android-roms/wiki/SPL ) guide.
Is there any way to recover it? or should i put it on the bin?
You're going to have to be more specific than "it doesn't start".
Does it turn on? If so, does it hang at the htc magic screen? Can you hold vol-down and press power (while still holding vol-down) and load a screen with three androids on skateboards? If you can do the last step, it's not bricked, and you should look at the thread I have below about bricking and semi bricking, one of the users on there gave a great amount of information on what you can do if your phone's not working right (bricked).
Caid.
444
Caid444 said:
You're going to have to be more specific than "it doesn't start".
Does it turn on? If so, does it hang at the htc magic screen? Can you hold vol-down and press power (while still holding vol-down) and load a screen with three androids on skateboards? If you can do the last step, it's not bricked, and you should look at the thread I have below about bricking and semi bricking, one of the users on there gave a great amount of information on what you can do if your phone's not working right (bricked).
Caid.
444
Click to expand...
Click to collapse
Hi Caid, thanks for the reply! sorry for the short message without details.
Here is the answer for your first question (sadly, the rest of questions can be skipped):
Does it turn on?
It doesn't
It was after follow the guide i mentioned before. I tried to update the SPL, but something went wrong and my phone didn't turn on again.
So... I think I have to accept the fact is not going to work again.
Is there any kind of service able to fix this?
Anibal
No display at all? no backlight on the screen? no vibration (signifying it's past a certain point in the loading stage)?
You probably tried taking out the battery for 10 seconds and then putting it back?
As Caid444 asked, tried holding Back+Power for a few seconds (after making sure power is off and not just hanging. Take off battery for 10 sec and reload)? Tried holding Home+Power after making sure power is off?
please i need some help htc touche cruise
hi everyone. I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help
parrot5 said:
No display at all? no backlight on the screen? no vibration (signifying it's past a certain point in the loading stage)?
You probably tried taking out the battery for 10 seconds and then putting it back?
As Caid444 asked, tried holding Back+Power for a few seconds (after making sure power is off and not just hanging. Take off battery for 10 sec and reload)? Tried holding Home+Power after making sure power is off?
Click to expand...
Click to collapse
I'd really like to say it DOES something... but it doesn't . I tried Volume down + power, back + power and several more combination always taking out the battery and putting it back.
It's bad... Do u know if there's any hardware service for this?
Just a wild guess, but since the phone sucks more battery, then a vampyre on rampage.
Could it be an idea, to charge the battery before, or have the usb cable pluged in, when you press back+home? (the same buttons you used to enter fastboot)
I'm pretty sure what you're trying to say is, you know enough about the phone to know how to bring it into it's multiple boot options, and none of them make the phone even burp. So there's no need to tell you to press this button plus that button, or insert usb or remove usb, or battery or such, because you've already done all that.
Well, I'd have to agree with you that it's dead. Unfortunately, there's nothing to do at the moment. I'm guessing (or maybe just hoping) that in the future there will be an unbricker for our phone, much like those available for many htc branded winmo phones. In the meantime, how old is your phone? Can you still bring it back?
Caid.
444
p.s To anyone else who's trying to figure this out, let's assume that he's already tried the many variations of recovery procedures and that it's still not working.
argc79 said:
I've got a "Brick" HTC Magic - Vodafone.
Basically, when i press the power button doesn't start. It happened after follow the "Install / Update SPL" ( http://code.google.com/p/android-roms/wiki/SPL ) guide.
Is there any way to recover it? or should i put it on the bin?
Click to expand...
Click to collapse
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade? (I hope you didn't try to flash a G1 SPL on your Magic...).
Amon_RA said:
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade?
(I hope you didn't try to flash a G1 SPL on your Magic...).
Click to expand...
Click to collapse
That's how my brick arrived ! Tried Hard SPL, after installing the one you suggested. Yours okay, Hard SPL no. But even after installing the spl, no fastboot adb.
BRICKED by HARD SPL ( the recommended )
Same here, I have just bricked my new vodafone HTC Magic (Vaffanc...)
downloaded from here: http://code.google.com/p/android-roms/downloads/list?q=label:SPL
I hope something can be done. It is not reacting to power button at all.
Amon_RA said:
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade? (I hope you didn't try to flash a G1 SPL on your Magic...).
Click to expand...
Click to collapse
I think you are right, I have flashed the G1 SPL. But the page is really not clear, it start speaking as Dream/Magic and probably it is only for Dream. Since it says to apply the Hard Spl and in the download link(http://code.google.com/p/android-roms/wiki/SPL) there is no clue that it is not for the G2.
Any idea? anybody got it changed from the shop with no problems? (mine is vodafone in the netherlands)
Me idiot, I have to leave tomorrow for holidays!
byronhero said:
I think you are right, I have flashed the G1 SPL. But the page is really not clear, it start speaking as Dream/Magic and probably it is only for Dream. Since it says to apply the Hard Spl and in the download link(http://code.google.com/p/android-roms/wiki/SPL) there is no clue that it is not for the G2.
Any idea? anybody got it changed from the shop with no problems? (mine is vodafone in the netherlands)
Me idiot, I have to leave tomorrow for holidays!
Click to expand...
Click to collapse
as far as i can see no need to flash spl on vodafone magic. i have the same phone and all i did was root with Rav1.1.1G.img and flashed rom of my choice. you have flashed phone with g1 spl and it actually says g1 on the link you provided..........can't see how you missed it. with phone off press home+power button as that bring up recovery image. Rav image file is safer due to that. i am sure if hardspl was available for Magic it would be posted on here as a sticky
hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana
thanant said:
hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana
Click to expand...
Click to collapse
You did brick one with the hardSPL and now you bricked another with the same stuff? Didn't you learn the first time? Only way is to go back to the store and tell em you did it again.
thanant said:
hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana
Click to expand...
Click to collapse
It seems to me you need to go back to basics and start here
A noob question but what exactly does flashing a new SPL unlock.
I got my Vodafone UK HTC magic and simply Downloaded a 32B ROM and used nandroid backup to apply the update.zip and it installed fine and can use Root required apps.
hi all
My HTC magic was bricked after update SPL. Now when press power button, it stuck at HTC magic logo, anyone have solution for fix its?
I Can not understand how can this be possible. Why guys all of you, don't read before trying to change your SPL???? You even don't need any changes about it?! Why do you try to change the SPL? Do you know what that SPL does? I think most of you - don't.
My next question is why all of you are trying to flash the G1 SPL onto Magic phone? Are you crazy or what? There is NO HARDSPL for Magic (G2, Sapphire or whatever you want to call this device)!
The SPL collection is posted in this forum by Amon_Ra, and if someone want to change the SPL can do this by downloading some of the SPL collections posted here.
say2k said:
hi all
My HTC magic was bricked after update SPL. Now when press power button, it stuck at HTC magic logo, anyone have solution for fix its?
Click to expand...
Click to collapse
Power off your phone! Then press and HOLD the "back button", while holding it press once the red one(which you usually use to power on the phone). It will power on (i hope). If you get in fastboot mode then everything will be fine.

[WTA] is this htc magic brick ?

Sorry for my bad English before . Yesterday I had my friend’s htc magic . He gave me that because he said that it was briked. When I press back+power or voldown+power or home+power , the result is same like picture .. Is that means bricked ?
I also try plug in that phone when powered off via usb to my computer , the orange led is on .
And if I try to fastboot again, the orange led goes off and the same picture showed up.
Do you know what should I do ?
Thanks before..
Hello,
It's the same problem for some of us.
Check my thread:
http://forum.xda-developers.com/showthread.php?t=642947
Still no apparent solution. Let us wait for JTAG evolution.
Best regards,
Anthon.
anthonws said:
Hello,
It's the same problem for some of us.
Check my thread:
http://forum.xda-developers.com/showthread.php?t=642947
Still no apparent solution. Let us wait for JTAG evolution.
Best regards,
Anthon.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=6241323#post6241323
that image appeared to me the first time i was flashing and went to recovery mode. If you press home + Power doesnt appear a menu?
what were you guys trying to do to happen that?
Magic de-brick success via jtag
http://forum.xda-developers.com/showpost.php?p=6260574&postcount=510
and here for the entire discussion (was started for g1/dream but the result is both debrick of magic and g1/dream)
http://forum.xda-developers.com/showthread.php?p=6260574#post6260574
Cheers,
bart99

HD 2 dead OR NO DEAD ???!! Help please

So a friend have a problem with a ROM, and i decides to flash rom radio and with an other ROM and when i'm flashing HD2 freezing and lock at 53%, i trying to flash with any others Roms and i have a big problem, hd2 no reboot,, and no reboot in bootloader mode too after :S
i trying the Hard Reset manual and nothing !!
Who can help me ???
Sorry for my bad english!
Friendship Kindly.
if you can't get into bootloader then it is probably dead.
So volume down while pressing the reset key doesn't do anything?
If you plug it into a charger does the red led come on?
What version hd2 is it?
Thank's for your answer so,
i can't make it in bootloader even if i press volum down button and press the end key, he does nothing :s but he return in bootloader mode one time / 50 ...
when he connect to a source i don't see the red led for charging batterie :s
and i don't know what is this model, it's an HD2
And the last time i boot it, it's written Software uptade fail, try again with a /!\
If its a US T-Mobile one (has T-Mobile at the top and green & red buttons at the bottom) then its most likely that the radio he has flashed to it is the wrong one.
If this is the case, then there is no fix.
Otherwise, its best to see if you can send it back for repair

Serious problems with (semi?) bricked HD2

Hi all,
yesterday a friend of mine gave me his HD2 for repair, he bought it from eBay with a ROM failure.
I never tried to fix / flash any HTC, so I read trough a lot of flashing guides and other peoples problems etc.
So I'll tell you whats working / what I tried / what I can do / what I can't do, in the hope someone can make sense out of this and help me
1) The phone has a strange behaviour in terms of the battery. It only turns on if I'm lucky. This means if I pull the battery out and back it and try to power it on, I get a light / weak vibration (and if I'm lucky) it boots into the states mentioned in point 2) and 3). If I'm unlucky on the other hand, it just stays at a black screen, but still gives me this light / weak vibration. Windows recognises the phone in this back-screen-state, but doesn't like it that much, since it wants drivers for a "Qualcomm MSM .... something" device.
The best way to get the phone back to book (in the possible states mentioned in point 2) and 3).) is to let the battery rest fro a little while and plug it back in ... or I spam the phone like quickly plugging the battery out and in and prey that it somehow boots.
2) The "booting" I was talking about in point 1) doesn't mean it boots into any OS. I attached a picture which shows the state of the phone when I try to boot it normally via the power button. It just freezes there at this pink circle and does nothing. If I'm not wrong it should show the radio version etc. in red in the bottom left corner, but we'll get to that
Things I can do:
3) I can get into bootloader mode.
4) I can flash HSPL 2.08 and 3.03 ... or it's stock versions however I like.
5) I can execute "task29.exe" which finishes its job successfully.
Things I tried (and noticed):
6) I tried to flash "MAGLDR" which also finishes successfully (according to the install tool at least), but does nothing on the phone, same screen as in the attachment.
7) I tried to flash the latest radio ROM (v.2.15.50.14 afaik) via "CustomRUU.exe", which get stuck on 96%. "CustomRUU.exe" later on tells me that the communication betweeen the host and phone failed.
8) The phone doesn't seem to be branded, yet I tried to flash both T-Mobile and unbraded roms and 2 different versions:
Code:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe
ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship.exe
If I flash those with HSPL and the installer it came with it stays at 0% forever.
If I flash them without HSPL and the installer they came with they get stuck at different point somewhere between 8% and 10% and if I wait for 10 seconds, the progress bar turns red and a "!" appears at the end of the progress bar, the installer later on tells me, that this version is not for my phone or something.
If I flash them with HSPL and "CustomRUU.exe" the progress bar also get stuck at the above mentioned %-marks, but the progress bar stays green and does nothing for 10 minutes, after that the "CustomRUU.exe" tells me that the communication with the phone failed.
Some things I noticed:
9) While I was spamming the phone with battery I once got to a point where the charging LED light up for the first time in this whole process I went trough with this phone.
10) After point 9) I plugged the battery out and back in and powered it on via the power button. I got to the screen I attached below, but it didn't got stuck there, the screen just faded to black and the phone shut itself off. I managed to do this 2 times in a row, after the third try it froze again and I was back there where I was before (points 1-8 ).
This is it As you can see I tried a lot of stuff, yet I think I've overseen something and I hope you can help me there or got some other ideas apart from the JTAG'ing method, which shouldn't be an option for now, as getting into the bootloader mode is worth gold afaik, so we should be able to do something via this mode right?
Best regards,
SE_iCEQB
BTW: I can also get into the hard reset mode, but of course this gains nothing on this phone
EDIT1: Another thing I noticed, is that in the bootloader mode it says "SS-BC" in the top line, where on every other picture I saw of this phone in its bootlaoder mode, it says "HX-BC" or something, dunno if this is important.
The phone came with a german packaging, so I only tried the "DE" roms mentioned in point 8).
While I was searching for roms, some people said that I can check the S/N of this phone on the HTC website which I couldn't find ... is it gone or am I blind already?
SS and HX in the bootloader screen just means Samsung or Hynix, , two chip providers HTC uses. They do the same thing, and you can forget about that for now, you have much bigger issues than one chipset being slightly better than the other.
The pink on black screen is a splashscreen, anyone recognise it? winmo? android?
The HTC website started dropping support pages for the HD2 a month or two ago, , looks like its ancient history as far as HTC are concerned.
Qualcomm MSM,,, this is a bad sign, , it is what the bare chipset presents itself to the usb connection as when there is no controlling bootloader. (This is what tmous users get when they radio brick their phones). Quite an odd symptom to see in a phone that powers on.
From the various power / boot symptoms, it sounds likely that one or more of the following are true
1 - the battery may be low on charge, and if magldr is installed the battery wont charge until android is running (which of course it cant) so you NEED to get magldr off ASAP (if in fact it flashed)
2 - the radio may be corrupted, which usually manifests itself as flashes failing at 8 - 10%, or radio flashes never completing.
3 - The phone may be one of the unlucky ones that has/is cooked/cooking itself. have a read on the 'freezer trick' where you cool the phone down for a while in a bag in the freezer, then quickly flash from sd as soon as you take it out, so the chips don't overheat before its done. If this turns out to work, then the phone has hardware issues.
4 - The bootloader itself may be corrupt, but only slightly (just theorising now) or the NAND memory where the bootloader is stored could be starting to degrade.
Recommended way forward.
Assuming you have access to a card reader,,,
send me your IMEI and an email address, and ill generate you a Goldcard.img,
follow THIS to make teh goldcard and place on that goldcard the RUU_Signed.nbh (renamed to leoimg.nbh) extracted from, , lets go for the WWE 3.14 rom from HERE (Lotta junk in that folder, scroll way down towards the bottom, look for filename as below)
id go for
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.zip
down towards the bottom.
(Thats assuming you want english? theres probably a DE one if you prefer)
SO, id try flash that from the goldcard, and report back.
(Note i'll be on and off all day, so don't expect an immediate response to your IMEI, cheers, oh and the .img when i send it will most likely get spam foldered, so dont miss it!)
I created a goldcard myself and tried the image inside "RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.zip".
While flashing it showed me "RSA Fail" on "Radio_v2".
Any ideas? I'll try other ROMs till someone answers
Thanks,
iCEQB
EDIT1:
Trying "GER" Roms:
1 test) HTC_HD2_RUU_Leo_HTC_GER_1.66.407.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe - "RSA-Fail" on "Radio_v2"
Ahh radio fail, bad news. I've seen it cured once or twice, by flashing the phones original rom, but I suspect those were exceptions.
I've also seen failed flashes take when you well chill in the freezer (card sim and battery out while it chills) and quickly flash on removal.
Also, just confirm you made a hd2 winmo goldcard, the free goldcard page at revskills is for wp7 and android phones.
samsamuel said:
Also, just confirm you made a hd2 winmo goldcard, the free goldcard page at revskills is for wp7 and android phones.
Click to expand...
Click to collapse
Yeah I used the wp7 config. Is it bad? I mean, the goldcard works right?
test 2) RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe - "RSA-Fail" on "Radio_v2"
I'm out of ideas guys ... will wait for you to create me a winmo goldcard image and try them again.
Last resort is the freezer trick. Or any other ideas on how to progress from here?
Regards,
iCEQB
EDIT: BTW, does HSPL need to be deinstalled for these goldcard actions?
Ohhh hang on, that img i sent wont work, silly me, its not the imei I need, its the Cid (unique serial, uid, goes by a few names) of the SD card. See the howto I linked ya for how to find it.(really easy if you have access to any other winmo phone, not so easy otherwise.)
Just shows how long its been since I thought about goldcards.
Sorry.
Which branded phone is this?
Brother even I have same type of logo when phone starts (pink colour circle)
Even my phone is bricked but I can install wp7 or android (only no network problem)
Can u guide me how did u solve this issue pls
Thanks & Regards
SE_iCEQB said:
Hi all,
yesterday a friend of mine gave me his HD2 for repair, he bought it from eBay with a ROM failure.
I never tried to fix / flash any HTC, so I read trough a lot of flashing guides and other peoples problems etc.
So I'll tell you whats working / what I tried / what I can do / what I can't do, in the hope someone can make sense out of this and help me
1) The phone has a strange behaviour in terms of the battery. It only turns on if I'm lucky. This means if I pull the battery out and back it and try to power it on, I get a light / weak vibration (and if I'm lucky) it boots into the states mentioned in point 2) and 3). If I'm unlucky on the other hand, it just stays at a black screen, but still gives me this light / weak vibration. Windows recognises the phone in this back-screen-state, but doesn't like it that much, since it wants drivers for a "Qualcomm MSM .... something" device.
The best way to get the phone back to book (in the possible states mentioned in point 2) and 3).) is to let the battery rest fro a little while and plug it back in ... or I spam the phone like quickly plugging the battery out and in and prey that it somehow boots.
2) The "booting" I was talking about in point 1) doesn't mean it boots into any OS. I attached a picture which shows the state of the phone when I try to boot it normally via the power button. It just freezes there at this pink circle and does nothing. If I'm not wrong it should show the radio version etc. in red in the bottom left corner, but we'll get to that
Things I can do:
3) I can get into bootloader mode.
4) I can flash HSPL 2.08 and 3.03 ... or it's stock versions however I like.
5) I can execute "task29.exe" which finishes its job successfully.
Things I tried (and noticed):
6) I tried to flash "MAGLDR" which also finishes successfully (according to the install tool at least), but does nothing on the phone, same screen as in the attachment.
7) I tried to flash the latest radio ROM (v.2.15.50.14 afaik) via "CustomRUU.exe", which get stuck on 96%. "CustomRUU.exe" later on tells me that the communication betweeen the host and phone failed.
8) The phone doesn't seem to be branded, yet I tried to flash both T-Mobile and unbraded roms and 2 different versions:
Code:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe
ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship.exe
If I flash those with HSPL and the installer it came with it stays at 0% forever.
If I flash them without HSPL and the installer they came with they get stuck at different point somewhere between 8% and 10% and if I wait for 10 seconds, the progress bar turns red and a "!" appears at the end of the progress bar, the installer later on tells me, that this version is not for my phone or something.
If I flash them with HSPL and "CustomRUU.exe" the progress bar also get stuck at the above mentioned %-marks, but the progress bar stays green and does nothing for 10 minutes, after that the "CustomRUU.exe" tells me that the communication with the phone failed.
Some things I noticed:
9) While I was spamming the phone with battery I once got to a point where the charging LED light up for the first time in this whole process I went trough with this phone.
10) After point 9) I plugged the battery out and back in and powered it on via the power button. I got to the screen I attached below, but it didn't got stuck there, the screen just faded to black and the phone shut itself off. I managed to do this 2 times in a row, after the third try it froze again and I was back there where I was before (points 1-8 ).
This is it As you can see I tried a lot of stuff, yet I think I've overseen something and I hope you can help me there or got some other ideas apart from the JTAG'ing method, which shouldn't be an option for now, as getting into the bootloader mode is worth gold afaik, so we should be able to do something via this mode right?
Best regards,
SE_iCEQB
BTW: I can also get into the hard reset mode, but of course this gains nothing on this phone
EDIT1: Another thing I noticed, is that in the bootloader mode it says "SS-BC" in the top line, where on every other picture I saw of this phone in its bootlaoder mode, it says "HX-BC" or something, dunno if this is important.
The phone came with a german packaging, so I only tried the "DE" roms mentioned in point 8).
While I was searching for roms, some people said that I can check the S/N of this phone on the HTC website which I couldn't find ... is it gone or am I blind already?
Click to expand...
Click to collapse
Do a jtag on it it will fix everything i think
Sent from my Nexus 7 using xda premium

Categories

Resources