I need the manual cdma programming code of my htc ozone. I already try ##000000 and ##778 its now working do you have any idea what is the code?
Thanks,
You may need to Application Unlock your phone first. You can use SDA_AplicationUnlock
Run from PC when phone connected
Related
What I don't understand:
When trying to start the gsm function of the xda with a "foreign" sim-card it tells me to enter the Access-Code in order to unlock the phone.
In this case there must exist a certain defined code which lets you unlock everey xda.
I am asking myself if there has probably already been a clever person trying to get this code somehow. Or am I totally wrong and it is necessary even for O2 to connect the device to some sepcial equipment.
From my understanding every single phone/pda etc has its own unique unlock code, abit like a PUK code.
It is made up using digits from the phone number, SIM IMEI and the Device IMEI number, only the service provide i.e. Orange, O2, Vodafone will have the sequence for this.
Just use the XDA Unlock tool listed on the XDA Developers site.
Hope this helps
Mike
Unlocking
...or just try that with a serial cable connected to your XDA and have a terminal program (eg. Hyperterminal) running on your PC:
... some of these things are pretty easy
once you know the trick. For instance, if you just put the XDA
in bootloader mode and enter "dualser", followed by
"AT%UREG?3FE00C,4", you will see the SID unlock code. More news
about all the things we've learned will be available soon on our
GSM research page...
Click to expand...
Click to collapse
Write down this SID-Code and use it when you insert a foreign SIM-Card.
Greetings, Kaputter
I have been asked to look into whether an application we have written ro PocketPC will work on an XDA device. It currently uses the PC/SC API to access a SIM card in a Cardman PCMCIA carrier. I need to find out if we can either use the PC/SC API to run GSM SIM commands to the SIM/USIM in the built in reader, e.g. reading files, unlocking the PIN, getting status, running the GSM or AUTH algorithm and retrieving results.
Is the PC/SC API supported? Are there equivalent functions in the RIL API? Where is some good documentation on low-level SIM card access in this environment?
Thanks,
Erik Tkal
the only method to communicate with SIM card is through the GSM modem's AT commands.
GSM modem's AT commands
Maybe you've got a quick hint - how I can use AT commands to milk the SIM card for its GSM triplets?
I have a VX6900 that was Flashed to Cricket, I have GPSViewer, Google maps, HTC GPS tool, & Quick GPS. each one see that i have a GPS card but I have never gotten a lock on, I have followed many treads, but I still can't get the GPS to work on my phone. please Help
try gps toggle
my sister flashed her sprint version of the touch to cricket and she uses gps toggle to turn on/off the gps receiver. i suggest that you only have google maps and gps toggle installed, and nothing else. give it a try and let me know if it worked out for you!
good luck
I've been told that nothing i do will enable my GPS because it was flashed wrong
wakko69 said:
I have a VX6900 that was Flashed to Cricket, I have GPSViewer, Google maps, HTC GPS tool, & Quick GPS. each one see that i have a GPS card but I have never gotten a lock on, I have followed many treads, but I still can't get the GPS to work on my phone. please Help
Click to expand...
Click to collapse
I also have mine flashed to Cricket. I have never got a GPS lock on mine...
So anyone have any ideas??
did you get GPS working
Did you get GPS working with your cricket ROM If not let me know I can help you.
Please post anyway how to get GPS working with a Cricket ROM.. Also, do you or does anyone have suggestions for a Cricket ROM having just a stock Sprint Touch? Thanks in advance.
phigan said:
Please post anyway how to get GPS working with a Cricket ROM.. Also, do you or does anyone have suggestions for a Cricket ROM having just a stock Sprint Touch? Thanks in advance.
Click to expand...
Click to collapse
I will post you a nice tutorial tomorrow for the GPS and if you PM or post your email I will send you one of my cricket custom ROMS for the touch.
cricket ROM and tutorial
I have included a custom ROM in this tutorial
1st off credit is due to those that wrote these programs I only take credit for putting this all together.
#1 use msl grabber to get the msl/spc code found here
http://forum.ppcgeeks.com/showthread.php?t=43560
install via activesync or sd card and run on ppc.
#2 unlock with the 2.31 unlocker listed here
http://forum.ppcgeeks.com/showthread.php?t=20370
#3 flash this sprint 6.1 ROM to update radio "WARNING DO NOT LET CUSTOMIZATION RUN" SOFT RESET WHEN IT SAYS AUTO CUSTUMIZATION IN 3 SECONDS. This is for GPS1 to work.
http://www.htc.com/us/SupportDownloa...cat=2&dl_id=66
To do this connect USB to computer then Press power camera and Reset to get to bootloader red green yellow screen and connect to cable then run the exe file. DO NOT LET CUSTOMIZATION RUN SOFT RESET WHEN IT SAYS CUSTOMIZE IN 3 SECONDS.
#4 Go to the following and download from windows drivers and unlocking tools
http://www.4shared.com/dir/13898363/...4/sharing.html
QPST
windows htc driver
activesync4.5
Ryanmogul diagnostics shortcuts
download the following
http://www.4shared.com/file/10597370...HMregedit.html
http://www.4shared.com/file/94425441...t5_0_31_7.html
Install Ryans diagnostics on ppc
Install QPST on computer
Install htc drivers on computer
Put phone into diag mode & connect to computer. computer should connect and find new device
run QPST configururation and add new port till you find your phone.
Now in QPST run from top menu start clients service programing.
Select phone
Read from phone imput spc/msl code from the grabber.
Then enter 000000 in the service programing field.
Write to phone
now while in QPST lets get your GPSone ste up for cricket.
Go to the GPS1 tab and uncheck all the boxes then recheck them.
then enter the following
pde ip address 117.29.223.11
pde port # 8080
pde transport IP
Position calculation mobile
Write to phone
close out
I would recommend now to flash a custom ROM here is a link to one of mine. http://www.4shared.com/file/135174580/27254c16/VOGUIMG.htmlinstall on a FAT32 formated 2gig or less msd card and rename to VOGUIMG.NBH THEN INSERT CARD AND PUT PHONE INTO BOOT LOADER AND FOLLOW INSTRUCTIONS.
You will need a cricket PRL to load through PST setting.
then go to this thread it will help you set up your pst setting correctly.
http://forum.xda-developers.com/showthread.php?t=492824 *NOTE* In some cricket markets you will need to change from EVRC to VOICE 13K to make outgoing calls. YOU CAN ALSO DOWNLOAD THE MMS CAB FROM HERE and then
Install the cricketwapmms cab
Do not try to open a data connection untill you have cricket service on the phone.
To authinticate your user name 10digit#@mycricket.com
you must have service.
Just a couple notes to have Email and push services work you MUST have the $15.00 HTML plan on your account and your phone must be listed in the system as a QA4 Evoke.
GPS may Require priming unless you use Ryans Googlemaps.cab
Credits go to ImCokeMaN for the unlocker and his great tutorial
and Ryanmogul6800 on XDA for his great software and his perfect PST setting.
Please let me know if this helped any or if I can be of any further assistance.
__________________
My GPS is working, But I had help there a guy in omaha that did it and it's running nice.
Good glad you got it running Also if you wanted push email to work there is a program called funambol that works ok with cricket.
hi i am tryin to get the gps running using your fix but all of the links are not working when i click on them but just to tell you what im working with i have the sprint vogue flashed to cricket and im running the new nsfan wm6.5 v16 rom and when i try gps viewer i cant find a fix, so is it the rom maybe cause my radio is 3.42.50....so can you point me in the right direction cause my phone is amazing but the gps is a setback and this is something that i really want spent weeks looking for something so thanks for all of your help
I apologize for that I don't know why they don't work here is the GPS1 setting that need to be entered in QPST. Your radio version is good to go for GPS.
while in QPST lets get your GPSone ste up for cricket.
Go to the GPS1 tab and uncheck all the boxes then recheck them.
then enter the following
pde ip address 117.29.223.11
pde port # 8080
pde transport IP
Position calculation mobile
Write to phone
It looks like you have a good rom to be using so most of the links you don't really need.
Links you may need are below and they do work I just checked.
QPST http://www.4shared.com/file/101893747/6958b637/QPST_v27_Build_301.html
HTC driver http://www.4shared.com/file/101893703/a59b72a/WindowsHTCdrivers.html
Diagnostics shortcuts http://www.4shared.com/file/101893721/d661b484/RyanMogul_Diagnostic_Program_Shortcuts.html
thanks so much u will try it now and get back to you
Hello all,
as title today flashed my phone to get new 7.8 dynamic rom
flash goes well
but after hard reset the phone shows invalid sim card
and imei shows 000000000 (code *#06#)
any idea?
i found a guide here to use QPST but is for samsung SIII
and the 8700 have different engineering menu code...
Please save me ((
***SOLVED***
the solution is app diagnosis
enter in diagnosis dialling the code ##634##
then *#7284#
and select
Modem, Usb Diag
restart the phone and follow the guide here
thanks to Hero for the guide
This may be little bit nooby but discussing on flashing imei's is not a bit illegal-ish? It's not like jailbreaking or any kind of alteration don't you think?
i think so,
in fact i posted a link and not the entire guide
... in any case, it's not so easy to change the imei on your phone and make it functionally.
you need an imei code there is not in use in your country by another phone
and an imei phone a phone like yours according with product type.
there is a function called:
"auto provisioning"
you see you receive, with some carriers, automatic mms and internet configuration at first access?
gsm cell identify and decrpt your imei and give this info to carrier.
hope this can helps
This modem is very different from the others. It's kind of interface ethernet-usb or something.
It is not possible or necessary to make the switch to modem only from Hyperterminal or puTTY.
Prerequisites:
1 - ROOT
2 - Modem with unbranded firmware.
To this must go to calcode.webs.com, or https://www.facebook.com/Calcodewebcom, with your IMEI can get the NCK and FLASH CODE CODE for Huawei modems IMEI number 85/86. Since it is the only calculator free to do so. The DC-Unlocker balance no longer free to do so, if you can accomplish for pay.
If you know the IMEI of the modem there are several ways to find out, the easiest is with the DC-Unlocker
Then lower the firmware of this website
http://www.unlockmodemfree.biz/2013/01/upgrade-huawei-e303-firmware-to.html
and flashed from a PC with WINDOWS (they will ask the flash code, there enter the flash code obtained from calcode.webs.com).
If your modem is lock then use the Card Lock Unlock Tool program, download it from the same website, and try to unlock your modem to use with any company (optional).
After this and the tablet off and plug the modem light up. When you turn the tablet will see the signal bar in the lower right corner.
3 - At this point of the tutorial is where I am a little confused. Since I do not know if I got the connection by using the method of xdadevelopers or if this is not necessary (because I did it before trying to connect to the UMTS Manager Root)
Two options: a) http://forum.xda-developers.com/showthread.php?t=2172914
This thread details a method somewhat difficult to do. I did it. Instead of using ES Explorer I used Root Explorer and instead of using the GScript used the Script Manager. The issue here is that after the method nothing happened, no connection established, no sailing. Then I opened the UMTS Manager Root and configured with APN, username and password for my ISP 3G. I used the port / dev/ttyUSB0 and "CONECT" with success.
b) Then it may not be necessary to make the method xdadevelopers and only need ROOT MANAGER UMTS on the tablet, download it from the PlayGoogle
https://play.google.com/store/search?q=UMTS+Manager+root&c=apps
add your apn, username and password. Then select the port / dev/ttyUSB0 and give Connect.
In the end I succeeded. Maybe some other user can play and comment if necessary xdadevelopers method (http://forum.xda-developers.com/showthread.php?t=2172914) before using the UMTS Manager Root or only using this apk wonderful connection is already achieved.
Thanks man
this is cool, just to add, the site you provided for unlcoking of huawei modems is no more in service so i just want to add a place people can generate free unlock codes for Huawei Modems like the E303 as you mentioned.
Huawei Unlock calculator