HD2 Messaging concerns - HD2 General

hi all,
i just have a small question, i have been playing with my hd2 for quite some time now, i want to use the alphanumeric keypad for texting etc, i turn off t9 but everytime i type a letters, it displays the letter, then a word from th typed letter. even if i am searching for a contact, it gives me suggested words not names on the contact. i tried everything but it is still there. i use alphanumeric with my td2 but i dont have this problem. any ideas?
cheers!

Related

Writing SMS with standard mode with one hand?

Very often I have to write an SMS with one hand, but it is impossible with Qtek 2020.
I would like to find a software where you can write an SMS with the standard mode (like on normal GSM) with standard numbers 1-9 with letters on them.
I use D9 to find the contact and I think it is very usefull.
When you find a contact and you tap the SMS button near the number it should be very appriciated to have a standard GSM input letter mode (like T9) instead of default SMS client of WM.
Do someone know if a software like this exists?
Thanks for the answer,
Urosh
GO to www.yorch.net and look under "software".
I' don't find any software I described before.
Please let me know which one do you think do what I said.
Thanks,
Urosh
I apologise, I thought it was on yorches site, here is the link for you, it is a superb piece of software and it is FREE. Anybody else wants a brilliant sms program make sure you get it too.
http://www.handango.com/PlatformSea...siteId=1&txtSearch=designlab&zsortParams=true
I just found a bug in this program when running on xda2, if you push "select" button when entering phone number it gives an error, but ig you spend a little time inserting all your often used numbers you can use the drop down becuase it remebers the last 20 numbers that you have used, its worth a little time to set it up becuase it saves a lot of time in the long run.
Actually it's not working at all with my mda ii It says: message sent successfully, but later on-message not delivered Do you have any idea what I could be doing wrong? Is there a special format in which I have to put the number of receipient?
i think, only way is spb fullscreen keyboard or typeango ..
It's working fine on my XDA-II with T-Mobile ROM 1.60. The only thing is that if I am trying to send to local mobile number I have to enter the number with '+', country code etc. while I could use 'short' number with ordinary mobile phone.
Zeljac said:
Actually it's not working at all with my mda ii It says: message sent successfully, but later on-message not delivered Do you have any idea what I could be doing wrong? Is there a special format in which I have to put the number of receipient?
Click to expand...
Click to collapse
Ok, that seemed to do the trick. Tnx a lot, it's working now flawlessly. But, I still have another question -how do you input "+" directly from the SMSwriter. "+" is on the same key as the "0" and whatever I do I keep getting "0". Of coarse, I could call up the keyboard but for that would again need a stlyus
Its a serious shortcoming, its a pity somebody couldnt patch on the ability to select searchwhich would bring up the contacts list, any offers from you programmers please???
unfortunately, found no way around it, I used to enter '+' with soft keyboard using a pen. The only temporary solution which comes to my mind is the list of numbers used to send SMS already (there should be some 25 numbers kept).
Zeljac said:
Ok, that seemed to do the trick. Tnx a lot, it's working now flawlessly. But, I still have another question -how do you input "+" directly from the SMSwriter. "+" is on the same key as the "0" and whatever I do I keep getting "0". Of coarse, I could call up the keyboard but for that would again need a stlyus
Click to expand...
Click to collapse
For me is impossible to use this software only with my fingers.
It has too small dialogue boxes (to find the contact).
For me the best solution would be to have a D9 program that integrates a SMS client which has the same keypad which is at the start of the program (with big buttons) to write to message (when the contact has just been selected).
Bye,
Urosh

Contacts completion in messaging

I suddenly have to do it without contacts completion in the Messaging program.
Before, I could just type the first 3+ letters of a contact name on the 'To:' line in email/sms/mms/ messages and a pick list came up showing the corresponding contact(s) to pick.
That neat pick list doesn't come up anymore.... not even after a soft reset.
There still is the 'Check names' option in the menu, which also comes up with the appropriate name when entering only a few 'To:' letters, but the pick list is much more efficient ofcourse.
Note: I'm using the 2.00.04 PV PRO Crossbow ROM.
Anyone the solution?
Thanks!!
There...
....already found the solution.
Because every Crossbow version still has this 'Suggestion words when entering text' issue, I set 'suggest after X words' to the maximum of 7 letters, so that when I accidentally forgot to disable the suggesting (when Crossbow's bug enabled it again after a soft reset) the suggesting wouldn't come up by typing short words.
The thing is that, even when the entire suggesting is disabled, the number of letters you set up for 'suggest after X words' still affects the number of letters you need to enter on the 'To:' line in a new message before you see the mentioned pick list.
So, solved.

[Solved]dialer/contact problem?

Hi all.
First i would like to say that this is an excellent board for HTC devices. Never i have seen so many helpfull topic.
I own a HTC Touch 3G for a week now, yester i copied my sim contacts to my "contacts" on the phone (i need new sim for new provider)
Now when ever I try to dial a numer or open contacts, i see this
picture:
I can still use the numbers and browse contacts but this "busy" icon is bothering me since i can hit "2" for dialing.
I hope i explainend my problem in good English
Thx in advance for reading my topic.
Not sure why the "wait cursor" is there. I never experience the "wait cursor" on my dialer. What should happen is - when you press a button, it should search for the number or alphabet in the contact list (and SIM, if you configure both). If number or alphabet is found it will display on the list. If not it will ask if you want to save the number typed to contact.
Have you tried "softrest" , close all other running programs and see if any better ?
Soft reset was my first thougt. It did not work.
The problem was solved when i discovered an option to hide sim contacts
My sim contacts are hidden and it all goes a lot faster now
Useful finding. I did not experience the "wait cursor" delay bacause my SIM list is small, less than 50.

Contacts Problem in Messaging

Am facing a strange problem with my new Nexus, In Messaging when am trying to compose a message, In TO option it doesn,t show nay name and not even show any names from contacts, For Example, in my Contacts there is a nmae JOHN, but When in Messaging TO Option when i Type J it soesn,t show any contacts started from J, Everytime i have to add the Mobile Number there or Send SMS via Contacts.
Help me regarding this
Unless you memorized the person's area code + number, the name will not appear when you composed regular texts. I have found the fastest way to compose texts is to scroll through the contacts, click the name, and then select the green message smiley. Adds a few seconds of time onto the composition, but you get faster with it when you're used to scrolling through your contacts.
StOTTO said:
Unless you memorized the person's area code + number, the name will not appear when you composed regular texts. I have found the fastest way to compose texts is to scroll through the contacts, click the name, and then select the green message smiley. Adds a few seconds of time onto the composition, but you get faster with it when you're used to scrolling through your contacts.
Click to expand...
Click to collapse
That's not true. I type the first letter of the name and they show up. I know what your problem is too.
You need to edit your contacts and add the number as "Mobile". I assume right now you have them set as "Home" which is the default. Your phone doesn't display "Home" numbers when you're texting.
Vatumb said:
Am facing a strange problem with my new Nexus, In Messaging when am trying to compose a message, In TO option it doesn,t show nay name and not even show any names from contacts, For Example, in my Contacts there is a nmae JOHN, but When in Messaging TO Option when i Type J it soesn,t show any contacts started from J, Everytime i have to add the Mobile Number there or Send SMS via Contacts.
Help me regarding this
Click to expand...
Click to collapse
It was my understanding you had to type two letters to get the auto-suggest to pop up, not just one. Try "JO"...
daveid said:
It was my understanding you had to type two letters to get the auto-suggest to pop up, not just one. Try "JO"...
Click to expand...
Click to collapse
You can type one or two. His problem is that he has their phone numbers set to "Home" instead of "Mobile".
dumbestcrayon said:
You can type one or two. His problem is that he has their phone numbers set to "Home" instead of "Mobile".
Click to expand...
Click to collapse
Seriously, I've always (had a G1 since launch as well) had to type two letters before the suggestions came up, I'm actually testing this right now. Going through each letter of the alphabet, and nothing comes up with just one letter inputted. If your phone does it with one, I'd like to know how!
daveid said:
Seriously, I've always (had a G1 since launch as well) had to type two letters before the suggestions came up, I'm actually testing this right now. Going through each letter of the alphabet, and nothing comes up with just one letter inputted. If your phone does it with one, I'd like to know how!
Click to expand...
Click to collapse
Oh well I guess you're right. I guess I've never stopped at one letter =P
But either way I know what he's talking about. My wifes number got changed to "Home" a while ago and it would NOT display her name in the TO field. I went to edit her contact and found that it said "Home" so I changed it to "Mobile" and it fixed it.
Speak of the devil. It just did it again and I just fixed it lol.

[Q] Strange issue when typing contact name in sms

Hi
Have everybody experienced that the contacts shown in the list when typing a name in "to:" are the ones after what you type?
Ex.
I type "Kristian" and there is only one Kristian in my contacts, but what is shown in the list is "Lars" which is the contact just after "Kristian" in the list.
Hope you understand my problem, which first occurred after i upgraded the rom to the I8700XXJK1 firmware. I would like a solution as this behavior is quite annoying.
Best regards Kristian Hagsted
No sorry, my phone always shows the contacts that fit to the entered letters.
For example, if I enter "mark" then the phone predicts "Mark" and "Markus", but if I type "marku" or "markus" then there is only the one "Markus" predicted.

Categories

Resources