Please help {SOLVED} - HD2 Windows Mobile 6.5 ROM Development

HTC HD2 now has hspl on it tried to update rom i start the image update gets about half way, then syas
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA FAIL
Update terminate
UPDATE FAIL

When you enter Bootloader mode, just to be sure, what is shown for the SPL version?
You need HSPL 1.42.0000 on your device in order to flash successfully.
You must also flash a Radio version next and not a custom ROM version.
1. Download your required Radio and rename the extracted file to RUU_Signed.nbh
2. Sync your phone with the PC
3. Run CustomRUU.exe from the Radio's Folder and follow the instructions (if one isnt included then download it here)

don't instal from sd card.why would you?
instal hspl, flash rom/radio using usb,job done.

Mastoid said:
You need HSPL 1.42.0000 on your device in order to flash successfully.
.
Click to expand...
Click to collapse
just to un confuse that statement, you need it too say in boot loader
spl 1.42.HSPL
and NOT
spl 1.42.0000

this is what im stuck with i cant boot the phone, to get it to sync with the pc

What error code do you receive when it fails to flash?
Try the following:
1. Download orginal ROM from HTC.com
2. Remove HTC Battery
3. Remove SD-Card
3. Connect the Phone via USB to Computer
4. Start-up the phone in Bootloader mode wuth the Tree-color screen
5. If everything is right, in the bottom you will see USB
6. Start-up the update on your computer (ROM you've downloaded from htc.com)
7. Run the Update
8. Your phone should now boot after it installs
9. Place the battery and SD-Card back in the Phone
If that works, first flash to a Radio version from the link specified above (in post #2), and then you can flash to a custom ROM.

trev666 said:
this is what im stuck with i cant boot the phone, to get it to sync with the pc
Click to expand...
Click to collapse
No need to sync with the pc, provided when connected to the pc it shows usb at the bottom of that screen you can still flash.

just got home, on my pc just managed to change my radio got to be something wrong with the girlfriends laptop keep you posted and thank you so much for helping me folks

guys i love you so much you just saved my life thank you so much all sorted now. next time i will be more carefull

Related

Unable to downgrade my SPL from 3.13 to 2.20

Hi there,
Hope you can help me...
Since i bought my Cruise, I flashed it to the newest ROM version of HTC and it automatically installed SPL 3.13 with.
The problem is that if I want to install the WM 6.5 rom, I have to "Downgrade" My SPL version from 3.13.0000 to 2.20.
I followed the steps explained by "Olipro", but when the upgrade starts, RUU kills activesync (seems to be normal) and when the phone normally reboots in bootloader mode (like when you flash a new rom), nothing happens. The phone didn't shutdown and tries to establish a new USB connection !
I tried to turn manually the phone in bootloader mode on to force the SPL update, but the % bar stays at 0 and RUU returns a communication error (262).
I tried also to install the wm 6.5 rom without install SPL 2.2, but it crashes (stays @ 0% too)
I don't know how to install this stinky version of HARD SPL.
Heeeellllpppp !!
NOTE : I tried with or without µSd, does the same thing.
Thx
hmm try disabling firewall and antivirus one of them may be blocking the connection. Thats my only thought about it.
Thank you for the answer but it don't work...
Nobody can help me ?
Try to extract the files from the newest htc rom to a new folder, and then copy the "RUU_Signed.nbh" from the SPL V2 folder to the extracted files (to the new folder) and run the "ROMUpdateUtility.exe" from the extracted files (from the new folder).
nope ...
Please, consider my asks...
I know there is necessarily a solution but I have not yet found.
I don't know where/why it is crashing.
What does the HTC need to downgrade the hardspl ?
Is there a protection that can't be bypassed with the 3.13 ?
The only thing that I can do atm, is flashing the official HTC rom (useless ^^).
The actual version of my rom is :
_HTC Touch Cruise_RUU_Polaris_HTC_FRA_3.13.406.0_radio_sign_25.85.30.07_1.59.42.15_Ship
Thanking you in advance...
Pixel69 said:
Please, consider my asks...
I know there is necessarily a solution but I have not yet found.
I don't know where/why it is crashing.
What does the HTC need to downgrade the hardspl ?
Is there a protection that can't be bypassed with the 3.13 ?
The only thing that I can do atm, is flashing the official HTC rom (useless ^^).
The actual version of my rom is :
_HTC Touch Cruise_RUU_Polaris_HTC_FRA_3.13.406.0_radio_sign_25.85.30.07_1.59.42.15_Ship
Thanking you in advance...
Click to expand...
Click to collapse
HSPL 3.13? In this ROM is ver. 3.13 drivers, not HSPL... If you have original ROM and you dont install Olipros HPSL, you have original HTC SPL...
When I enter bootloader mode, the HSPL version is : 3.13.0000
Of course it's the original htc HSPL.
The problem is that I can't downgrade it to the olipro's version : 2.20.
Did you try it on other PC?
2 PCs, 2 USB cables..
The official rom upgrade works fine, I dont think that the problem comes from the computer.
definite guide:
1. establish a connection with activesync via usb (orbit2 to pc)
2. start the romupdateutility provided in hardspl folder.
3. before it starts flashing, you need to also follow on-screen instructions on orbit2!!! execute jump-spl and stuff: click yes on orbit2!!
4. when the orbit2 states: Replug USB. you need to plug the usb-cable once off and then put it back to connect to your pc.
5. it starts flashing and restarts after its done.
Hi Manaaa,
I don't know what is jumpslp ??
I found it on the web (xda..), copied it in my "my documents" folder, ran it but it asks me a jump address (default is 0x00000000) and an spl (*nb) file..
What is jump spl ? What is the address to jump to? and where can I find the *nb file ?
In the olipro's hspl folder is only a *nbh file.
Thank you
I wouldn't recommend using a jump spl for our phones if there isn't one in the Hardspl Pack then one is not needed to be run.
Personally im still really confused by this so if i get it straight.
You are synced with activesync.
Run the file for Hardspl Run RomUpdateUtility.exe
Then go though. It switches off activesync.
Then what?? Exactly Does it ask you to replug the cable? Do you get the rom flash screen (with %) at all??
Also i dont think that spl flashes can be run from the booloader as it has to be a modded bootloader (jumpspl if you will), loaded by the program to be able to flash the new hardspl.
Also i know very little on this, this is as much as i understand it to be.
chris10230 said:
You are synced with activesync. OK
Run the file for Hardspl Run RomUpdateUtility.exe OK
Then go though. It switches off activesync. OK
Then what?? Exactly Does it ask you to replug the cable? NO
Do you get the rom flash screen (with %) at all?? NO
Click to expand...
Click to collapse
Normally, after killing activesync, the phone turns into bootloader mode. Mine stays in winCE and tries to establish new usb connection...
I also decided to force manually bootloader mode and killing activesync by myself.
I ran RUU again, it first checked the phone state (such as battery >50%, connectivity...)
CHECK : OK
Next step, by clicking "NEXT" on the RUU interface, the phone turns in "% mode" and the update starts but stays at 0%.
After a while, RUU returns an update error (such as 262).
Noway to flash hardSPL :'-( , v3.13 seems to be "write protected".
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
That is what error 262 is but really dont see why this happens either. And since you can boot into windows its not much help.
So it just wont go to flash it when you click it through, hmm
Your last resort would be to PM cmonex as she will have helped make this with oilpro. Ask and see if she can shed some light on this one. Maybe something has gone wrong somewhere (quite likely) that we don't know how to fix.
Stupid question but have you tried downloading, unzipping it again? May have been a bad dl... or unzip
Have tested it with about 10# DLs...
I PM'd Olipro, waiting for a response now
Flash back to HardSPL and don't Re-Plug
Hi Pixel,
Herewith are guide for you
1) Flash back to HardSPL and don't re-plug until end of session (5 minutes)
2) Flash back to original SPL 3.13 on this post . This original SPL for HTC Touch Cruise only
3) After you do this you cannot flash with other Cooked ROM or Shipped ROM
with different ID, unless you flash back to HardSPL
Good Luck my friend
I have exactely in the same configuration as Pixel69 with the same result.
I've tried to an other PC without any change.
Has somebody any idea?
Just had an idea what OS are you running to do it?
If its not 7 may not be fully compatible... Shot in the dark really

Help- Unable to upgrade after Gold Card ROM upgrade

Hi all,
I updated my HD2 to the 1.61 (Turkish) software that came out a few months ago. It took me a while to get the goldcard working but all turned out ok.
I now want to upgrade the phone to a cooked ROM, but I'm stuck.
Everything I try stops at the boot loader screen.
I've tried reflashing with a stock 1.66 ROM
I've tried install HSPL.
Whichever method I use- I get as far as the phone rebooting into the bootloader- then it stick and will not go any futher. The screen reads PB8110 HX-BC, SPL-1.42.0000 XE....... then at the bottom of the screen it read 'USB'
Every upgrade program seems to be waiting for something to trigger the download.
What am I doing wrong?? Do I need to undo something from using a goldcard?
Thanks
you aren't using HSPL
as the bootloader doesn't say you are using HSPL
so either try that again or use SSPL
I've tried installing HSPL, but it never gets past the intial reboot into the bootloader.
I would have thought the HSPL app would reboot the phone into the bootloader then load a new HSPL bootloader.
I've also tried loading a stock ROM onto the phone, and it 's the same. Phone reboot into bootloader and then nothing. I end up taking the battery out and starting again.
Any ideas what's preventing the download while in the bootloader?
try to install ship rom wwe 1.43 via sdcard. leoimg.nbh.
then install hspl.
extract the nbh file from wwe ship rom, rename the ruu.nbh file to leoimg.nbh and put it in the root of your sdcard , make sure its fat32 formatted.
philtrick123 said:
I've tried installing HSPL, but it never gets past the intial reboot into the bootloader.
I would have thought the HSPL app would reboot the phone into the bootloader then load a new HSPL bootloader.
I've also tried loading a stock ROM onto the phone, and it 's the same. Phone reboot into bootloader and then nothing. I end up taking the battery out and starting again.
Any ideas what's preventing the download while in the bootloader?
Click to expand...
Click to collapse
HI
1. Get the device into bootloader
2. Connect the cable the device says USb
3. Install HSPL.exe (If you r pc is running on Vista or Windows 7 then Right click and run as administrator)
Hopefully will install HSPL
Then install any rom you like ( But read the rom thread about requirements ie: new radios)
Good luck

Ok, yeah..i bricked it..

So....i had read the thread and installed HSPL on my phone before i attempted to used a cooked rom, having tried to install my first one i find now i have the 'white triangle of death with upside down exclamation mark'.
I am on T-Mobile in the UK and i do not want to brick this beyond all repair..what is the procedure i should do now to get it working..i beleive i need to format a SD card to fat32 but which rom do i put on it and then what is the button press sequence..i have no connection via active sync anymore.
phone off - hold "volume down" - tap power whilst still holding volume down - phone will boot to bootloader (three stripes)
what does it say next to spl?
if
1.42.0000 then hspl isn't installed. what rom did you flash and how?
if says 1.42.HSPL then hspl is installed, plug in usb, wait for "serial" to become "usb" and flash your rom again from usb.
Thanks...
1.42.HSPL is what it says, it also says lower down 'upgrade ROM code error please try again' which i did do several times through the .exe on the rom i tried to upgrade to which i believe was TOUCH_X_TREME_21895_1_2_36_47, im not to sure whether the rom is compatible for me or even what i done wrong, i was relying on the fact that i had installed HSPL prior to trying to flash the new rom, i can confirm that the phone changes to 'usb' when i plug it in on the tri colour screen...so when you say try to flash the rom again what exact method do i use..when i tried the first time i just run the .exe file in the rom folder and followed the prompts
EDIT: having just followed what you said...i run the rom .exe file and followed through recovery and it says error 'error 302 update error'...what if the rom i am flashing is NOT compatible.
Why don't you first try to flash back a stock rom that you can download from http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html ?
Choose preferably a 1.48 rom.
Anyway, you'd better read the "flashing for noobs" thread in ROM dev forum before you go and do something even worse. You're probably trying to flash a corrupt file or something alike.
get the T-Mobile ROM from HTCs website, boot into the bootloader and connect and flash the stock ROM...that should at least get you working again
yea as above.sounds like a bad download or something. try a different rom or re download.
be aware the rom you are flashing needs a certain radio, so when it does flash it still won't boot till you flash the correct radio.(it's all in thefirst posts of the rom thread)
you have hspl installed so as long as you only flash by usb you are safe. just boot to bootloader, run the instal from the pc, phone will flash
EddyOS said:
get the T-Mobile ROM from HTCs website, boot into the bootloader and connect and flash the stock ROM...that should at least get you working again
Click to expand...
Click to collapse
Have done this..still not flashing, keeps giving update error, as i said..i have no active sync connection and it states that is needed ?...so how do i flash the rom ? also when you asked me to go to the tri colour screen and read off the HSPL part, on the green section it says 'upgrade ROM code error please try again'..is this normal in this state
Why am i getting this error when i try to flash it via usb...comuter still recognises phone but active sync does not connect to it so i am assuming this is causing the error ?
So when you go into the bootloader and plug in the USB does it say USB on the phone screen? If so, you also need to run the updater as an administrator. If this doesn't work, try another PC. If that doesn't work then you may very well have bricked it.
Also, are you using ActiveSync or WMDC?
EddyOS said:
So when you go into the bootloader and plug in the USB does it say USB on the phone screen? If so, you also need to run the updater as an administrator. If this doesn't work, try another PC. If that doesn't work then you may very well have bricked it.
Also, are you using ActiveSync or WMDC?
Click to expand...
Click to collapse
Yes it changes to USB when i plug it in, i am using WMDC but when i plug the phone in it does not connect anymore, i have tried running as admin but it makes no difference, i keep getting error 302.
Correct me if i am wrong, i thought the idea of installing HSPL would keep me safe from bricking the phone, i think all i initially done was flash an incorrect rom, ill try it on my laptop but that has not been in contact with the phone yet
What OS is on your laptop? if it's Windows 7 just plug in your phone and it will automatically WMDC so you don't need to install it first
Laptop done the trick !..seems to be doing the job now...dont know what the hell thats all about...
Would be helpful if knew what radio i had on it...and do i install rom first, then install radio ?
ActiveSync or WDMC wont recognise the device as the phone has not fully booted up.
With the phone in boot-loader mode and connected by USB, then run the ROM installation program. Ignore the fact that it says you must be ActiveSynced. Just tick the box and go into the next page.
As been said already, make sure you install the correct RADIO rom for the customised ROM. Once that is done, then you can install the ROM.
The best ROMs to download are ZIP'd or RAR'd ones, as they have a check that they have not been corrupted when uploaded or downloaded.
Well this is highly weird !!...i restored the Tmo dump from htc website but i now have the rom on there that i was trying to install previously before i bricked it...Touch X treme
What radio are you trying to flash? Read this and use this to flash the phone with the radio needed for your ROM choice:
http://forum.xda-developers.com/showthread.php?t=644781
Once done, try flashing the phone again (I'd make sure HSPL is on the phone too)
fred_up said:
ActiveSync or WDMC wont recognise the device as the phone has not fully booted up.
With the phone in boot-loader mode and connected by USB, then run the ROM installation program. Ignore the fact that it says you must be ActiveSynced. Just tick the box and go into the next page.
As been said already, make sure you install the correct RADIO rom for the customised ROM. Once that is done, then you can install the ROM.
The best ROMs to download are ZIP'd or RAR'd ones, as they have a check that they have not been corrupted when uploaded or downloaded.
Click to expand...
Click to collapse
So find out what radio i need before flashing, what if the radio i need to flash is not for the currant rom i am using...and am i right to say that some of these roms i cant use as they are not for the UK ?
All radios can be used, you can get them on their own and use with that link I posted before. going by the Touch X thread it says you need a 2.07 or 2.08 radio so get one of them and flash that first before flashing the ROM
I understand that better now...still not sure what went wrong there, from the laptop i thought and still do that i was flashing the stock rom for tmo from the htc website to restore the phone...but when it started up i was shocked to see the splash screen for the Xtreme rom..maybe i flashed that ?? if so why did it work this time..bad flash before ? and i have certainly not installed a radio myself...well thaks for your help anyway..the phone is up and running again and i will make sure HSPL is still there before i try my next rom
Likely bad flash - glad you're sortred now though. I always do the task29 with the radio nI want to use before flashing a ROM now to make sure the memory is clear...

Plz help

ive installed the 2.08 hspl on my hd2 and then started the magldr113 everythig was ok the phone rebooted and now its stuck on the white screen with htc logo on it how can i now run the DFT Anroid now coz i cannot connect the phone with the pc now plz help!!!!
Did you install the required radio? - needs to be 2.08.50.xx (or higher 50 series).
Switch phone off, hold in vol down and switch on. Phone will boot to bootloader screen, connect to pc and when usb shows on screen flash the correct radio.
ClydeB1 said:
Did you install the required radio? - needs to be 2.08.50.xx (or higher 50 series).
Switch phone off, hold in vol down and switch on. Phone will boot to bootloader screen, connect to pc and when usb shows on screen flash the correct radio.
Click to expand...
Click to collapse
Since im a noob.......how do i flash the corect radio on the bootloader screen do i need something to download?
FLASH PREFERRED RADIO
For more information about compatible Radios go *HERE*
Flashing Via ActiveSync
1. Download your required Radio and rename the extracted file to RUU_Signed.nbh
2. Sync your phone with the PC
3. Run CustomRUU.exe from the Radio's Folder and follow the instructions (if one isnt included then download it *HERE*)
Flashing via MicroSD Card
Use same method as Flashing a Rom via MicroSD Card
ClydeB1 said:
FLASH PREFERRED RADIO
For more information about compatible Radios go *HERE*
Flashing Via ActiveSync
1. Download your required Radio and rename the extracted file to RUU_Signed.nbh
2. Sync your phone with the PC
3. Run CustomRUU.exe from the Radio's Folder and follow the instructions (if one isnt included then download it *HERE*)
Flashing via MicroSD Card
Use same method as Flashing a Rom via MicroSD Card
Click to expand...
Click to collapse
Thx mate allready fixed the problem

Bricked or?

Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Ok try this, turn the phone off then hold the low volume botton n the power botton at the same time, n if it takes u to the bootloader then u r good, just search on how to install a rom of ur choise, good luck
Sent from my HTC HD2 using XDA Premium App
froibet said:
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Click to expand...
Click to collapse
Well the fact that it will even turn on means it is not bricked. A bricked HD2 will not even turn on the most it will do is flash tihe led light and vibrait a couple of times.
Follow the instructions of the above post and pull up bootloader, if bootloader comes up you can save the HD2. Depending on if you want to flash a official srock ROM or a custom ROM to the HD2 will dictate your next step.
If you want a official stock ROM then just download and flash the official update from T-Mobile.com just type in HTC HD2 update in the search box on the home page and you will find it. You will have to enter the IMEI number to download it wich you can find this number behind the battery. To flash it connect the HD2 to a computer via USB cable while in bootloader and wait for the serial in the white bar at the bottom of the bootloader screen to change to USB and the computer to show it recognizes the HD2 then run the update utility and follow all the on screen instructions.
If you want to flash a custom ROM as in custom Windows Mobile, NAND Andriod ROM, or Windows Phone 7 ROM then you will have to flash HSPL to the HD2. Download HSPL4 and flash 2.08 HSPL if hou want to flash a NAND Andriod ROM as MAGLDR only supports 2.08 HSPL. Or a Windows Phone 7 Rom, or flash 3.03 if you just want to flash a custom Windows Mobile ROM.
Now if you want a NAND Andriod ROM or Windows Phone 7 you will have to download MAGLDR and flash it to the HD2.
If you want a custom Windows Mobile ROM download the ROM of your choice and fladh it using the .exe or RUU wich ever one the ROM has. Note do all flashing of what I have previously mentioned via the method I mentioned before.
If you are wanting to flash a NAND Andriod ROM or Windows Phone 7 ROM then download the ROM of your coice and flash it using MAGLDR and the instructions of the ROM developer in thread for the ROM.
Now this is very important. I see from the picture you have a T-Mobile(TMOUS) HD2 so no matter what you do, do not flash a ROM with a radio version that reads like these 2.04.50.xx, 2.05.50.xx, or any radio that is x.xx.51.xx they will brick/kill a TMOUS HD2.
froibet said:
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Click to expand...
Click to collapse
I would recommend flashing a stock T-Mobile ROM, since that appears to be the flavor of the phone. This will install the correct radio. Once the phone is working, continue as per normal for flashing the ROM. You will have to reinstall hardspl.
thanks for the info guys! i really appreciate the support!
it seems like it won't read the USB... is the port busted?
froibet said:
thanks for the info guys! i really appreciate the support!
it seems like it won't read the USB... is the port busted?
Click to expand...
Click to collapse
try this:
1) download your stock ROM.
2) put it on your SD card via a card reader, you want an .NBH file.
3) rename the file LEOIMG.NBH
4) make sure the phone is off, make sure your SD card is back in your phone.
5) hold down and power
6) it should go to a tri-color screen and say something about flashing the image, hit power to confirm
7) it should flash no problems.
MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR A TMOBILE US HD2
Have exactly the same problem with my friends phone.
Its a TMOUS and sticks on the same boot screen.
He screwed it up when trying to install Android NAND on it.
I can enter bootloader And I have managed to get rid of MAGLDR and CWM.
I have HSPL 3.03 installed on it, but when I try to install the latest ROM from TMOUS it fails at 8% and tells me that
'ERROR 290: INVALID COMMAND
This update Utility cannot be used for your PDA phone. Please check your update utility'
Tried copying the relevant file to the SD card and renaming it leoimg.nbh but the install fails HERE aswell with the error:
"RADIO_V2 - RSA Fail"
I managed to install an energyrom onto it, but it wouldnt go past the initial boot screen
Any help appreciated
Boradan said:
Have exactly the same problem with my friends phone.
Its a TMOUS and sticks on the same boot screen.
He screwed it up when trying to install Android NAND on it.
I can enter bootloader And I have managed to get rid of MAGLDR and CWM.
I have HSPL 3.03 installed on it, but when I try to install the latest ROM from TMOUS it fails at 8% and tells me that
'ERROR 290: INVALID COMMAND
This update Utility cannot be used for your PDA phone. Please check your update utility'
Tried copying the relevant file to the SD card and renaming it leoimg.nbh but the install fails HERE aswell with the error:
"RADIO_V2 - RSA Fail"
I managed to install an energyrom onto it, but it wouldnt go past the initial boot screen
Any help appreciated
Click to expand...
Click to collapse
Try running a Task 29 on your friends HD2. This willtotally clean out the NAND memory of the HD2 and reformat it, kinda sounds like that is what is needed to be done. He may have messed the NAND memory format up when he was trying to install the Andriod. You will have to reflash a Windows Mobile ROM after you run the Task 29 as it will not ha e a ROM on the phone then. You will not have to reflash HSPL cause it will not remove it.
It seems that the problem is RADIO related. I can task 29, and I can install The latest Energyrom, but I CANT install a radio.
There is no radio ON the phone at the minute it seems. When I try to do a radio install, it asks me if I want to go from version ' ' to the update I am using.
None of the installers see a radio on the phone, and trying to install the radio always fails at 96%. This would seem to be the same if I try to install the official TMOUS latest ROM with radio from SD Card. It fails at the radio install part.......
Maybe time for a new thread for this one.......
orangekid said:
try this:
1) download your stock ROM.
2) put it on your SD card via a card reader, you want an .NBH file.
3) rename the file LEOIMG.NBH
4) make sure the phone is off, make sure your SD card is back in your phone.
5) hold down and power
6) it should go to a tri-color screen and say something about flashing the image, hit power to confirm
7) it should flash no problems.
MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR A TMOBILE US HD2
Click to expand...
Click to collapse
i can do all this without connecting to the PC? just flashes from the SD card???
froibet said:
i can do all this without connecting to the PC? just flashes from the SD card???
Click to expand...
Click to collapse
Yes you can flash radio and ROM from your SD card. Here is a link to the thread on doing this gives step by step, check it out.

Categories

Resources